Investigation of the effects of Au-colloid modification on cobalt hexacyanoferrate film growth and mass transport by electrochemical quartz crystal microbalance

The growth of cobalt hexacyanoferrate (CoHCF) films on bare and Au-colloid-modified electrodes in nitrate or sulfate solutions was monitored by electrochemical quartz crystal microbalance. The average efficiency of CoHCF film growth for Au colloid modified electrodes is 23 and 12 ng cm(-2) s(-1) in KNO3 and K2SO4 solutions, respectively, while those values for the bare gold electrode are 15 and 9 ng cm(-2) s(-1), respectively. In K2SO4 solution, the apparent molar masses for the Au-colloid-modified electrode at lower and higher potential is 58.4 and 37.3 g mol(-1), respectively, which is larger than those for the bare gold electrode (51.7 and 26.3 g mol(-1), respectively). The respective results were also obtained in KNO3 solution. Furthermore, the difference of the apparent molar masses at lower and higher potential for Au-colloid-modified electrodes is smaller than that for bare gold electrodes in the same electrolyte. Additionally, the mechanism of charge propagation is dependent on different anions in electrolyte solutions at higher potentials where the second redox reaction of CoHCF occurs. Therefore, the existence of Au colloids can accelerate CoHCF film growth and weaken the effect of anions on mass transport.     

Three-component one-pot total syntheses of glyantrypine, fumiquinazoline F, and fiscalin B promoted by microwave irradiation

A microwave-promoted three-component one-pot reaction has been developed to provide access to the core pyrazino[2,1-b]quinazoline-3,6-dione (1) scaffold, which is common to several families of alkaloids with significant biological activities. By adapting this synthetic strategy through the use of selected Boc-amino acids and amino acid esters, we have accomplished highly efficient and concise total syntheses of glyantrypine (2), fumiquinazoline F (3), and fiscalin B (5), achieving overall yields of 55, 39, and 20%, respectively.     

铜(Ⅱ)-氨基酸水杨醛席夫碱-α-氨基酸三元配合物的稳定性研究

在25±0.1℃、I=0.1 mol·L^-1 KNO₃条件下，应用pH法测定了氨基酸水杨醛席夫碱(Sal∶A，A配体)-α-氨基酸(Aa,B配体)三元配合物的稳定常数，实验发现在三元配合物的稳定性与B配体的碱性之间存在良好的线性自由能关系。同时，以稳定性数据为探针，研究了三元配合物分子内存在的配体间疏水缔合作用。     

六(乙氧基吡咯烷酮)三聚磷腈的合成与表征

以N-羟乙基吡咯烷酮与氢化钠作用生成相应的钠盐,再将此钠盐与六氯三聚磷腈(HCCP)发生亲核取代反应,合成了六(乙氧基吡咯烷酮)三聚磷腈,用IR、31P NMR、1H NMR、13C NMR、DEPT、FABMS等现代谱学技术对其结构进行了表征。生物活性试验表明,此化合物1mg/mL时对腐生线虫Panagrellus redivivus的72h致死率为52·7%。     

氨基酸水杨醛席夫碱与铜(Ⅱ)配合物的合成及其抗菌活性和稳定性、结构间的关系

氨基酸水杨醛席夫碱与铜（Ⅱ）配合物的合成及其抗菌活性和稳定性、结构间的关系毕思玮＊刘树祥（曲阜师范大学化学系，曲阜２７３１６５）关键词：氨基酸水杨醛席夫碱铜（Ⅱ）稳定常数抗菌活性实验部分将１０ｍｍｏｌ氨基酸和０．５６ｇ（１０ｍｍｏｌ）ＫＯＨ溶于热的９...     

Characteristics of electroosmotic flow and migration of neutral solutes under stepwise gradient elution of capillary electrochromatography

A theoretical study on the velocity of electroosmotic flow (EOF) and the retention times of neutral solutes under multiple-step gradient of capillary electrochromatography (CEC) was carried out, focusing on that with three kinds of mobile phases. Through the model computations, the detaining time of the second kind of mobile phase in the column was proved to play an important role in affecting EOF. The variation speed of EOF was shown to be determined by the differences among dead times in different steps. In addition, the prediction of the retention times of 13 aromatic compounds under gradient mode was performed with the deduced equations. A relative error below 3.3% between the calculated and experimental values was obtained, which demonstrated the rationality of the theoretical deduction. Our study could not only improve the comprehension of stepwise gradient elution, but also be of significance for the further optimization of separation conditions in the analysis of complex samples.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

Analysis of fatty oil in Semen Ziziphi Spinosae by capillary gas chromatography

A simple and fast capillary gas chromatographic (CGC) method with flame ionization detection is developed for the analysis of fatty oil in Semen Ziziphi Spinosae. After methyl-esterification, eight components are identified by gas chromatography-mass spectrometry. The derivatization condition is investigated in order to validate this method. Palmitic acid and stearic acid are quantitated simultaneously. The limits of detection are 5.024 microg/mL for palmitic acid and 6.957 microg/mL for stearic acid, respectively. The limits of quantitation are 16.76 microg/mL for palmitic acid and 23.19 microg/mL for stearic acid, respectively. The percent recoveries of palmitic and stearic acid are 97.4% and 96.6%. CGC is shown to be a quick and informative tool for the analysis of fatty oil in Semen Ziziphi Spinosae.     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

The synthesis and cationic polymerization of multifunctional silicon-containing epoxy monomers and oligomers

Several series of multifunctional silicon-containing epoxide monomers and oligomers have been prepared using rhodium catalyzed hydrosilation reactions. Dialkyl and diarylsilanes can be condensed with vinyl epoxides to give high yields of the desired diepoxides while the hydrosilation of alkyl and aryl silanes yields a mixture of di and tri epoxy substituted products. The condensation of αω,? Si? H difunctional compounds with vinyl epoxides can be carried out regioselectively to give α-hydrogen-ω-epoxy intermediates, which can be further reacted with di and tri olefins bearing terminal double bonds to give a series of well characterized epoxy functional oligomers. An investigation of the photoinitiated cationic polymerization of the monomers and oligomers, which were prepared during the course of these studies, was carried out. © 1994 John Wiley & Sons, Inc.