Large magnetic entropy change in Nd<Subscript>2/3</Subscript>Sr<Subscript>1/3</Subscript>MnO<Subscript>3</Subscript>

In order to search for new materials for the application of magnetic refrigeration, the polycrystalline perovskite compound Nd_2/3Sr_1/3MnO₃ was prepared by a solid-state method. The dependence of the magnetization on the applied field and temperature was measured near the Curie temperature. In terms of Maxwells equation, the temperature dependence of the absolute value of the isothermal magnetic entropy change |S_M| at various applied fields from 1 T to 5 T was determined. The results showed that a large magnetic entropy change was observed in this compound. The maximum magnetic entropy change |S_M^max|can reach 3.25 J/kgK with an applied field of 1 T at the Curie temperature of 257.5 K, which equals that of Gd. At 5 T applied field, it is 7.57 J/kgK. Such good magnetocaloric properties make this compound a promising candidate for the application of magnetic refrigeration in the room-temperature range. PACS 74.25.Ha; 75.30.-m; 75.30.Sg; 75.50.-y; 75.60.-d     

多层介质膜脉冲宽度压缩光栅与超短脉冲作用时的性能分析

基于啁啾脉冲放大技术的超短脉冲激光系统是提供超快、超强激光的重要途径，具有良好输出波形和高损伤阈值的多层介质膜脉冲宽度压缩光栅是获得高峰值功率脉冲激光的关键. 基于傅里叶谱变换方法和严格模式理论，分析了多层介质膜光栅(MDG)在超短脉冲作用下的光学特性. 结果表明，当MDG的反射带宽小于具有高斯分布的入射脉冲的频谱宽度时，-1级反射脉冲呈非对称高斯分布，其前沿出现振荡，并且-1级反射脉冲能量开始剧烈下降. 讨论了MDG结构参数对其反射带宽的影响. 分析了MDG与超短脉冲作用时的近场光分布，对提高其抗激光损 关键词： 脉冲压缩光栅 傅里叶谱变换 模式理论 损伤阈值     

Pb1－xMnxSe薄膜的光学特性

采用分子束外延的方法在BaF₂(111)衬底上制备出了高质量的Pb_1-xMn_xSe(0≤x≤0.0681)薄膜.X射线衍射结果表明，Pb₁-xMn_xSe薄膜为立方相NaCl型结构，没有观察到MnSe相分离现象，薄膜的取向为平行于衬底(111)晶面.晶格常数随着Mn含量的增加逐渐减小，Mn含量由Vegard公式得到.通 关键词： 1-xMn_xSe外延薄膜')" href="#">Pb_1-xMn_xSe外延薄膜 透射光谱 带隙 折射率     

北京谱仪Ⅲ飞行时间计数器系统刻度中的关联分析

利用电子对事例对北京谱仪Ⅲ飞行时间的测量误差, 以及不同测量之间的关联因子随击中位置的变化进行了仔细的研究. 加权的飞行时间由不同的测量值及其相关的误差矩阵计算而得. 蒙特卡罗研究表明. 为北京谱仪Ⅲ开发的关联分析算法 可以正确地处理包含公有误差项的多个实验测量结果的合并, 并且能够为粒子鉴别提供可靠的飞行时间信息.     

光纤模式混合器在差分吸收光谱系统中的应用研究

差分吸收光谱技术(DOAS)已经发展为监测对流层痕量气体的重要技术，一般采用光电倍增管(PMT)作为探测器.由于光电二极管阵列(PDA)在多道探测及像元灵敏性方面的优势，采用PDA代替扫描探测装置将能改善系统剩余噪声，提高系统性能.但实际应用中由于使用收发一体Cassegrain望远镜造成灯谱与大气谱结构不统一，在消除PDA像元间差异的过程中给系统带来误差，从而导致剩余噪声的标准偏差达到1.4×10^-3.根据光纤扰模原理在系统中加入自制光纤模式混合器很好的解决了上述难题，在实际应用中起到良好的作用，系统剩余噪声的标准偏差为3.4×10^-4. 关键词： 差分吸收光谱 扰模 模式混合器 剩余噪声     

Measurement of D(d,p) T Reaction Cross Sections in Sm Metal in Low Energy Region (10≤Ed≤20keV)

To study the screening effect of nuclear reactions in metallic environments, the thick target yields, the cross sections and the experimental S(E) factors of the D(d,p)T reaction have been measured on deuterons implanted in Sm metal at 133.2K for beam energies ranging from 10 to 20keV. The thick target yields of protons emitted in the D(d,p) T reaction are measured and compared with those data extrapolated from cross sections and stopping power data at higher energies. The screening potential in Sm metal at 133.2K is deduced tobe 520±56eV. As compared with the value achieved in the gas target, thecalculated screening potential values are much larger. This screening potential cannot be simply interpreted only by the electron screening. Energy dependences of the cross section σ(E) and the experimental S(E) factor for D(d,p)T reaction in Sm metal at 133.2K are obtained, respectively.     

Synthesis and fluorescence study of sodium-2-(4′-dimethyl-aminocinnamicacyl)-3,3-(1′,3′-alkylenedithio) acrylate

We synthesized two new compounds: Sodium 2-(4′-dimethyl-aminocinnamicacyl)-3,3-(1′,3′- ethyl- enedithio) acrylate (STAA-1) and Sodium 2-(4′-dimethyl-aminocinnamicacyl)-3, 3-(1′,3′-propylenedithio) acrylate (STAA-2). The maximum absorption of these compounds ranges from 460 to 520 nm with different molecular structures in different solvents. Meanwhile, the emission peak of these compounds arranges from yellow (510 nm) to red (605 nm). The emission spectra show red shift according to the strength of the hydrogen bonding property of the solvent. But the absorption spectra do not show clearly relationship with the strength of the hydrogen bonding property of the solvent. The Stoke shift of the compounds ranges from 42 to 102 nm. It changes in the following order, EtOH>H₂O>DMF, and STAA-1>STAA-2 in the same solvent. The fluorescent quantum yield of STAA-1 was measured to be 7.12% with quinine sulphate as the standard compound in ethanol. Furthermore, the relationship of the fluorescence of STAA-1 with pH (ranges form 4 to 14) in water (c=∼10⁻⁴) was studied to make sure that these compounds could be used as proton sensors.     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317     

A facile pathway for the fast synthesis of colloidal crystal‐loaded hydrogels via frontal polymerization

In this work, a dually sensitive colloidal crystal (CC)‐loaded hydrogel has been synthesized via frontal polymerization (FP) in a facile and rapid way. First, a polystyrene CC film was fabricated by vertical deposition on the inner wall of a test tube. Then, a mixture of acrylic acid (AAc), 2‐hydroxyethyl methacrylate (HEMA), and glycerol along with the initiator and crosslinker was added to this test tube to carry out FP, resulting in the formation of CC‐loaded hydrogel. The influence of the mass ratios of HEMA/AAc on front velocity and temperatures were studied. The swelling behavior, the morphology, and the stimuli‐responsive behavior of the CC‐loaded hydrogels prepared via FP were thoroughly investigated on the basis of swelling measurement, scanning electron microscopy, and reflection spectra. Results show that the as‐prepared CC‐loaded hydrogels exhibit excellent dual sensitivity to both methanol concentrations and pH values with very short response time, which can be observed visually without the aid of instruments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

建立模糊诊断矩阵的一种新方法

本文首先提出了一个新的模糊逻辑算子——模糊加权综合算子“#”,进而给出建立模糊诊断矩阵的新方法——网络法 ,并给出了相应的算法