胶束催化作用下实现聚苯乙烯的氯甲基化

用紫外分光光度法测定了离子型表面活性剂胶束溶液对聚苯乙烯四氯化碳溶液的增溶性能; 用胶束催化法实现了聚苯乙烯的氯甲基化, 用红外光谱法和佛尔哈德法表征了氯甲基化聚苯乙烯的化学结构与组成; 通过比较阴、 阳离子表面活性剂及结构不同的阳离子表面活性剂的催化效果, 探索了胶束催化的作用机理, 考察了表面活性剂结构对催化作用的影响规律. 结果表明, 表面活性剂胶束溶液可增溶聚苯乙烯的四氯化碳溶液, 随着四氯化碳在胶束中的增溶, 聚苯乙烯可转移至表面活性剂的胶束中; 胶束催化是实现聚苯乙烯的氯甲基化的有效途经, 仅用3.35 g/L的十六甲基三甲基溴化铵(CTAB),  于65 ℃， 5 h内即可使聚苯乙烯大分子链中的苯环氯甲基化程度达到37%; 聚苯乙烯与甲醛、 氯化氢的反应过程由亲电取代和亲核取代串联而成, 阳离子表面活性剂比阴离子表面活性剂的催化作用更加有效, 说明亲核取代是慢步骤; 阳离子表面活性剂疏水链越长, 对聚苯乙烯的增溶效果越好, 催化作用越强.     

有机质谱学法研究气相S_N2离子－分子反应进展

总结了近年来应用质谱方法研究气相SN2离子－分子反应的进展，主要包括气 相SN2离子－分子反应的机理，动力学和热力学的各种因素。与凝固相中反应对比 ，阐明了影响反应机理、方向与程度的决定性因素，及溶剂化效应对凝聚相中反应 的影响方式。还介绍了一些气相中特有的SN2离子－分子反应和研究气相反应特殊 的质谱学研究方法与技术。     

Highly Efficient Pd/C-Catalyzed Suzuki Coupling Reaction of p-（un）Substituted Phenyl Halide with （p-Substituted phenyl） Boronic Acid

A highly efficient Pd/C-catalyzed ligandless, heterogeneous Suzuki reaction of p-（un）substituted phenyl halide with （p-substituted phenyl）boronic acid in DMF/H2O solvent in a short reaction time （0.5 h） at 75 ℃ was developed. The key for such a catalytic system was the addition of 1 equivalent of tetrabutylammonium bromide. A wide variety of substituents can be tolerated and high yields of cross coupling products were achieved. The palladium catalyst can be easily recovered and reused without significantly decreasing its efficiency.     

层状MAgTeS3 (M＝K, Rb)的溶剂热合成与表征

以硫醇为螯合剂, 在溶剂热条件下合成了两种层状硫代亚碲酸盐KAgTeS₃ (1)和RbAgTeS₃ (2). X射线单晶解析表明, 1和2是类质同晶化合物. 在晶体结构中, 银硫四面体通过共用顶点形成无限的平行链, 在相邻链中银硫四面体取向相反, 这些链与链由三角锥配位的碲互相连接形成阴离子层状结构, 阳离子在阴离子层间. 1的结晶学数据为: M_r＝370.75, P2₁/c, a＝0.73639(6) nm, b＝1.06468(8) nm, c＝0.85203(6) nm, β＝106.4640(10)°, V＝0.64062(8) nm³, Z＝4, R(F)＝4.44%, wR(F²)＝11.66%. 2的结晶学数据: M_r＝417.12, P2₁/c, a＝0.75531(12) nm, b＝1.07076(7) nm, c＝0.8583(2) nm, β＝106.497(6)°, V＝0.66558(19) nm³, Z＝4, R(F)＝6.00%, wR(F²)＝15.43%. DSC及紫外-可见漫反射光谱研究表明, 这两种化合物为半导体, 并具有很好的热稳定性.     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

SO2-4对铁基催化剂上费托合成反应的影响

以FeCuK/SiO2为母体催化剂,用不同浓度的NH4HSO4水溶液进行等体积浸渍,制备了不同SO2-4含量的费托合成(FTS)铁基催化剂.采用原子发射光谱、低温N2吸附、 X射线光电子能谱、程序升温还原和穆斯堡尔谱等技术对催化剂进行了表征,并在H2/CO摩尔比0.67,WHSV=2 000 h-1,压力1.5 MPa和温度250 ℃条件下进行了浆态床FTS反应.结果表明,少量SO2-4能促进催化剂在H2中的还原;在合成气还原过程中,少量SO2-4对催化剂的碳化程度影响不大,但大量SO2-4严重抑制催化剂的碳化.在约500 h的运行实验中,各催化剂样品表现出的催化活性有所差异,但均呈现较好的稳定性.SO2-4可抑制水煤气变换反应活性,且随着SO2-4含量的增加,抑制作用愈加明显;同时,催化剂上浸渍少量SO2-4可有效抑制CH4的生成,提高低碳烯烃的选择性.     

Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

微孔[Me4N]2HgGe4S10的溶剂热合成与表征

用溶剂热方法合成了[Me₄N]₂HgGe₄S₁₀, 通过单晶X射线衍射, IR, DSC-TG手段对其进行了表征. 结果表明, 标题化合物属四方晶系, I-4空间群, 晶胞参数a＝0.92687(8) nm, c＝1.43739(12) nm, V＝1.23484(18) nm³, Z＝2, Mo Kα λ＝0.071073 nm, R₁＝0.0570, wR₂＝0.1374, 空旷骨架结构由超四面体Ge₄S₁₀与HgS₄四面体共用顶点连接而成, 有机模板离子在一维孔道中. 该化合物具有一定的热稳定性, 在320 ℃发生分解形成GeS₂.     

超声条件下芳基格氏试剂与4-烷基苯乙酮的反应

二芳基乙烯;超声条件下芳基格氏试剂与4-烷基苯乙酮的反应