半导体纳米结构的可控生长

应用MBE技术和SK生长模式,通过对研究材料体系的应力分布设计,生长动力学研究和生长工艺优化,实现了In(Ga)As/GaAs,InAlAs/AlGaAs/GaAs和InAs/InAl(Ga)As/InP无缺陷量子点(线)的尺寸、形状、密度和分布有序性的可控生长,这对进一步的器件应用特别重要.讨论了半导体纳米结构的空间有序性分布物理起因和退火的机制.     

R面、C面蓝宝石上生长的InGaN多层量子点的发光性质研究

采用表面钝化和MOCVD低温生长在蓝宝石(0001)面(即C面)和蓝宝石(1102)面(即R面)上形成了InGaN量子点,并构成了该量子点的多层结构.原子力显微镜测试的结果表明单层InGaN量子点平均宽约40nm,高约15nm;而多层量子点上层的量子点则比单层的InGaN量子点大.R面蓝宝石衬底上生长的InGaN量子点和C面蓝宝石衬底上生长的InGaN量子点相比,其PL谱不仅强度高,而且没有多峰结构.这是由于在C面蓝宝石衬底上生长的InGaN/GaN多层量子点沿生长方向[0001]存在较强的内建电场,而在R面蓝宝石衬底上得到的多层量子点沿着生长方向[1120]没有内建电场.InGaN量子点变温光致发光(PL)谱研究发现量子点相关的峰有快速红移现象,这是量子点系统所特有的PL谱特征.用在R面蓝宝石上生长的InGaN量子点作有源层有望避免内建电场的影响,得到高量子效率且发光波长稳定的发光器件.     

High Characteristic Temperature 1.3μm InAs/GaAs Quantum-Dot Lasers Grown by Molecular Beam Epitaxy

We report the molecular beam epitaxy growth of 1.3 μm InAs/GaAs quantum-dot （QD） lasers with high characteristic temperature T0. The active region of the lasers consists of five-layer InAs QDs with p-type modulation doping. Devices with a stripe width of 4 μm and a cavity length of 1200 μm are fabricated and tested in the pulsed regime under different temperatures. It is found that T0 of the QD lasers is as high as 532 K in the temperature range from 10°C to 60°C. In addition, the aging test for the lasers under continuous wave operation at 100°C for 72 h shows almost no degradation, indicating the high crystal quality of the devices.     

A broadband external cavity tunable InAs/GaAs quantum dot laser by utilizing only the ground state emission

A broadband external cavity tunable laser is realized by using a broad-emitting spectral InAs/GaAs quantum dot (QD) gain device. A tuning range of 69 nm with a central wavelength of 1056 nm, is achieved at a bias of 1.25 kA/cm2 only by utilizing the light emission from the ground state of QDs. This large tunable range only covers the QD ground-state emission and is related to the inhomogeneous size distribution of QDs. No excited state contributes to the tuning bandwidth. The application of the QD gain device to the external cavity tunable laser shows its immense potential in broadening the tuning bandwidth. By the external cavity feedback, the threshold current density can be reduced remarkably compared with the free-running QD gain device.     

调制掺杂GaAs/AlGaAs 2DEG材料持久光电导及子带电子特性研究

在掺Si的GaAs/AlGaAs二维电子气(2DEG)结构中，得到μ_2K=1.78×10^{6cm2/(V·s)的高迁移率.在低温(2K)和高磁场(6T)的条件下，对样品进行红 光辐照，观察到持久光电导(PPC)效应，电子浓度在光照后显著增加.通过整数量子霍尔效应 (IQHE)和Shubnikov-de Haas (SdH)振荡的测量，研究了2DEG的子带电子特性.样品在低温光 照后2DEG中第一子带和第二子带的电子浓度同时随电子总浓度的增加而增加；而且电子迁移 率也明显提高.同时，通过整数霍尔平台的宽度对光照前后电子的量子寿命变短现象作了理 论分析. 关键词： 二维电子气 量子霍尔效应 SdH振荡 持久光电导效应}     

Anomalous temperature dependence of photoluminescence spectra from InAs/GaAs quantum dots grown by formation–dissolution–regrowth method

Two kinds of InAs/GaAs quantum dot(QD) structures are grown by molecular beam epitaxy in formation–dissolution–regrowth method with different in-situ annealing and regrowth processes. The densities and sizes of quantum dots are different for the two samples. The variation tendencies of PL peak energy, integrated intensity, and full width at half maximum versus temperature for the two samples are analyzed, respectively. We find the anomalous temperature dependence of the InAs/GaAs quantum dots and compare it with other previous reports. We propose a new energy band model to explain the phenomenon. We obtain the activation energy of the carrier through the linear fitting of the Arrhenius curve in a high temperature range. It is found that the Ga As barrier layer is the major quenching channel if there is no defect in the material. Otherwise, the defects become the major quenching channel when some defects exist around the QDs.     

Determination of the relative permittivity of the AlGaN barrier layer in strained AlGaN/GaN heterostructures

Using the measured capacitance--voltage curves and the photocurrent spectrum obtained from the Ni Schottky contact on a strained Al_0.3Ga_0.7N/GaN heterostructure, the value of the relative permittivity of the AlGaN barrier layer was analysed and calculated by self-consistently solving Schr?dinger's and Poisson's equations. It is shown that the calculated values of the relative permittivity are different from those formerly reported, and reverse biasing the Ni Schottky contact has an influence on the value of the relative permittivity. As the reverse bias increases from 0 V to --3~V, the value of the relative permittivity decreases from 7.184 to 7.093.     

A面(11-20)ZnO薄膜中杂质的偏振PL谱研究

本文通过分析A面(11-20)ZnO薄膜的低温PL(光致发光)光谱偏振特性来研究ZnO光致发光谱中杂质峰的来源。低温(4 K)下观察到476、479 nm两处新的杂质峰以及390 nm处激子峰,根据两个杂质峰的偏振特性,初步判定476nm峰来源于氧空位能级到价带轻空穴的跃迁,479 nm峰来源于氧空位价带重空穴的跃迁。     

Finite element analysis of stress and strain distributions in InAs/GaAs quantum dots

In this paper, we perform systematic calculations of the stress and strain distributions in InAs/GaAs truncated pyramidal quantum dots (QDs) with different wetting layer (WL) thickness, using the finite element method (FEM). The stresses and strains are concentrated at the boundaries of the WL and QDs, are reduced gradually from the boundaries to the interior, and tend to a uniform state for the positions away from the boundaries. The maximal strain energy density occurs at the vicinity of the interface between the WL and the substrate. The stresses, strains and released strain energy are reduced gradually with increasing WL thickness. The above results show that a critical WL thickness may exist, and the stress and strain distributions can make the growth of QDs a growth of strained three-dimensional island when the WL thickness is above the critical value, and FEM can be applied to investigate such nanosystems, QDs, and the relevant results are supported by the experiments.     

Investigation of Oxygen Vacancy and Interstitial Oxygen Defects in ZnO Films by Photoluminescence and X-Ray Photoelectron Spectroscopy

ZnO films prepared at different temperatures and annealed at 900^o C in oxygen are studied by photoluminescence （PL） and x-ray photoelectron spectroscopy （XPS）. It is observed that in the PL of the as-grown films the green luminescence （GL） and the yellow luminescence （YL） are related, and after annealing the GL is restrained and the YL is enhanced. The 0 ls XPS results also show the coexistence of oxygen vacancy （Vo） and interstitial oxygen （Oi） before annealing and the quenching of the Vo after annealing. By combining the two results it is deduced that the GL and YL are related to the Vo and Oi defects, respectively.