新型水溶性膦配体用于烯烃氢甲酰化反应的研究

介绍了 4个水溶性膦配体的合成过程 ,并研究了 4个配体分别与乙酰丙酮二羰基铑构成的催化剂在水 -有机两相体系中 ,在不同条件下对 1-庚烯、苯乙烯和丙烯酸甲酯的氢甲酰化反应的催化性能 .结果表明 ,这 4个配体在水中的溶解性很好 ,并且有一定的稳定性 ;在温度为 5 0℃、压力为 5 .0 MPa、P/ Rh为 8、 [Rh]为 1.6×10 - 3mol/ L的条件下 ,苯乙烯的转化率可达 10 0 %、产物的 n/ i为 9.2 ;在相同条件下 ,1-庚烯的转化率可达99.3%、 n/ i为 2 .2 ;丙烯酸甲酯的转化率可达 92 .7%、 n/ i为 6 .3;α-甲基丙烯酸甲酯的转化率可达 73.0 %、 n/ i为 5 .5     

SiO_2负载的磺化三苯膦铑配合物催化高碳烯氢甲酰化及反应中的氘逆同位素效应

水溶性磺化三苯膦铑配合物担载在SiO_2表面制得的负载化水溶性Wilkinson催化剂具较大的比表面积,当1-己烯、1-辛烯、1-庚烯和十一烯酸甲酯等液态高碳烯烃在这种催化剂上于固定床加压流动态反应器中连续进行氢甲酰化催化反应时,产物醛的选择性98～100%,并可在适当过量配体存在下保持较高的催化活性.在这种催化剂上分别于CO用/H_2和CO/D_2气氛下进行烯烃氢甲酰化反应,可观察到显著的氘逆同位素效应.根据分析,初步认为酰基物中间体氢解反应可能是SiO_2负载的磺化三苯膦铑配合物催化剂上高碳烯氢甲酰化的速控步骤.     

多孔有机含BINAP聚合物负载Rh催化剂在苯乙烯不对称氢甲酰化中的应用:柔性手性口袋对产物对映体选择性的提高作用（英文）

不对称氢甲酰化是合成具有单一光学活性物质(如光学活性的醛、α-氨基酸和醇等)最为重要的反应之一.尽管不对称氢甲酰化反应的研究超过40年,但仍然是催化体系中具有挑战性的课题.该反应涉及到产物的化学选择性、立体选择性和对映体选择性的优化.目前,在Rh催化体系中,使用磷-亚磷酸酯手性配体或双亚磷酸酯配体可以在不对称氢甲酰化反应中取得优异的催化性能.然而在Rh/手性双膦配体催化体系中,不对称氢甲酰化反应性能通常很低.以BINAP配体为例,负载Rh金属后,在催化苯乙烯不对称氢甲酰化反应中,产物的ee值只有25%.同时,由于均相催化体系存在催化剂回收和产物提纯等问题,因此有必要研究多相不对称氢甲酰化反应催化剂.本文使用乙烯基修饰的BINAP配体5,5'-divinyl-BINAP与具有不同结构的共聚单体二乙烯基苯或1,3,5-三乙烯基苯基苯共聚,得到具有不同孔结构的聚合物Poly-1和Poly-2.为了比较,利用线性共聚单体乙二醇二甲基丙烯酸甲酯与乙烯基BINAP共聚得到聚合物Poly-3.上述三种聚合物材料负载金属Rh后,用作苯乙烯不对称氢甲酰化反应的催化剂.固体~(13)C核磁分析表明,三种聚合物材料负载金属后仍然保持较为稳定的C骨架结构.通过~(31)P核磁可以看到,嵌入在材料骨架中的BIANP仍然保持未被氧化的状态.N_2物理吸附结果发现Poly-1和Poly-2具有较大的比表面积和孔体积,而Poly-3的比表面积最小.热重分析显示,这些材料具有较高的热稳定性.在不同反应溶剂中催化剂活性差异较大.通过优化反应温度和合成气压力后,催化剂Rh/Poly-1在80℃和0.2MPa下产物的对映体选择性可高达58.9%,支链醛与直链醛的比值为8.5;而在相同反应条件下,均相催化剂Rh-BINAP的ee值仅为35.3%,但高于Rh/Poly-3.这是由于三个多相催化剂骨架中BINAP周围环境不同所致.前两个催化剂中,BINAP与空间位阻较大的单体相连接,使得反应底物按照特定方向与催化活性位点接触,形成了类似于手性口袋的结构.而Rh/Poly-3中,BIANP周围是线性的共聚单体,不能形成有效的手性口袋结构.Rh/Poly-1重复使用7次后,催化活性没有显著下降.拓展X射线吸收精细结构表征结果表明,Rh/Poly-1催化剂使用前没有Rh-Rh键存在,但经重复使用后,Rh金属部分聚集,生成了Rh-Rh键.球差电镜照片也证实了这一点.     

离子液体两相不对称氢甲酰化催化反应的研究

从(R)-BINAP出发制备水溶性磺酸钠盐配体(R)-BINAPS,采用离子液体BF4和PF6为介质,实现其Rh配合物对乙酸乙烯酯的两相不对称氢甲酰化反应.实验结果表明,在以BF4为介质的乙酸乙烯酯不对称氢甲酰化反应中,该催化剂在温和条件下显示出高于相应均相体系的产物ee值和异构醛选择性,并在6次循环使用中,反应产物的ee值、选择性和转化率均无明显改变;在离子液体体系中添加适当的甲苯时,油溶性配体(R)-BINAP与Rh组成的配合物催化剂亦可形成类似的两相反应体系,但其活性和选择性在重复使用中呈明显下降趋势.本文还考察了溶剂体系、膦铑比、温度、压力、时间等的影响,并尝试苯乙烯的两相不对称氢甲酰化反应.     

硅胶键合膦的制备及其对铑络合物催化1-辛烯氢甲酰化反应的影响

以硅胶为载体, 采用键合接枝法将2-(二苯膦基)乙基三乙氧基硅烷(DPPES)共价键合于硅胶表面, 制备了性能优良的硅胶键合型膦配体(以SiO₂(PPh₂)表示). 以SiO₂(PPh₂)为配体, Rh(acac)(CO)₂ (acac:乙酰丙酮)为催化前体, 负载铑膦络合物催化剂(SiO₂(PPh₂)/Rh)在1-辛烯氢甲酰化反应中原位生成. 对生成的负载型催化剂和硅胶键合型膦配体进行了傅里叶变换红外(FTIR)光谱表征, 考察了膦/铑摩尔浓度比([P]/[Rh])、温度等因素对铑催化的长链1-辛烯氢甲酰化反应的影响. 结果表明, 膦/铑摩尔浓度比的增加能显著提高反应的成醛选择性, 降低铑的流失. 在[P]/[Rh]=12、363 K、2.0 MPa、1.5 h 的温和反应条件下, 1-辛烯转化率和成醛选择性分别可达98.4%和95.3%, 其催化活性与DPPES或三苯基膦(TPP)作配体时的均相铑催化相近. 催化剂循环4 次后, 反应活性无明显下降, 1-辛烯转化率均在97.0%左右, 经电感耦合等离子体原子发射光谱(ICP-AES)检测,有机相中铑流失低于0.1%.     

多孔有机含BINAP聚合物负载Rh催化剂在苯乙烯不对称氢甲酰化中的应用:柔性手性口袋对产物对映体选择性的提高作用

不对称氢甲酰化是合成具有单一光学活性物质(如光学活性的醛、α-氨基酸和醇等)最为重要的反应之一.尽管不对称氢甲酰化反应的研究超过40年,但仍然是催化体系中具有挑战性的课题.该反应涉及到产物的化学选择性、立体选择性和对映体选择性的优化.目前,在Rh催化体系中,使用磷-亚磷酸酯手性配体或双亚磷酸酯配体可以在不对称氢甲酰化反应中取得优异的催化性能.然而在Rh/手性双膦配体催化体系中,不对称氢甲酰化反应性能通常很低.以BINAP配体为例,负载Rh金属后,在催化苯乙烯不对称氢甲酰化反应中,产物的ee值只有25％.同时,由于均相催化体系存在催化剂回收和产物提纯等问题,因此有必要研究多相不对称氢甲酰化反应催化剂.本文使用乙烯基修饰的BINAP配体5,5'-divinyl-BINAP与具有不同结构的共聚单体二乙烯基苯或1,3,5-三乙烯基苯基苯共聚,得到具有不同孔结构的聚合物Poly-1和Poly-2.为了比较,利用线性共聚单体乙二醇二甲基丙烯酸甲酯与乙烯基BINAP共聚得到聚合物Poly-3.上述三种聚合物材料负载金属Rh后,用作苯乙烯不对称氢甲酰化反应的催化剂.固体13C核磁分析表明,三种聚合物材料负载金属后仍然保持较为稳定的C骨架结构.通过31p核磁可以看到,嵌入在材料骨架中的BIANP仍然保持未被氧化的状态.N2物理吸附结果发现Poly-1和Poly-2具有较大的比表面积和孔体积,而Poly-3的比表面积最小.热重分析显示,这些材料具有较高的热稳定性.在不同反应溶剂中催化剂活性差异较大.通过优化反应温度和合成气压力后,催化剂Rh/Poly-1在80℃和0.2 MPa下产物的对映体选择性可高达58.9％,支链醛与直链醛的比值为8.5;而在相同反应条件下,均相催化剂Rh-BINAP的ee值仅为35.3％,但高于Rh/Poly-3.这是由于三个多相催化剂骨架中BINAP周围环境不同所致.前两个催化剂中,BINAP与空间位阻较大的单体相连接,使得反应底物按照特定方向与催化活性位点接触,形成了类似于手性口袋的结构.而Rh/Poly-3中,BIANP周围是线性的共聚单体,不能形成有效的手性口袋结构.Rh/Poly-1重复使用7次后,催化活性没有显著下降.拓展X射线吸收精细结构表征结果表明,Rh/Poly-1催化剂使用前没有Rh-Rh键存在,但经重复使用后,Rh金属部分聚集,生成了Rh-Rh键.球差电镜照片也证实了这一点.     

Rh-TPPTS/CTAB-MMT催化剂的制备及其催化长链烯烃氢甲酰化反应性能研究

通过浸渍法将水溶性铑膦配合物(Rh-TPPTS)负载到由十六烷基三甲基溴化铵(CTAB)修饰的蒙脱土(MMT)上,制备出Rh-TPPTS/CTAB-MMT负载型催化剂.采用XRD,FTIR,TG,BET,31P CP-MAS NMR和分散性实验对催化剂进行了表征.结果表明:水溶性铑膦配合物成功地负载到有机MMT上,并且该催化剂在有机溶剂中具有很好的分散性.该催化剂对于1-癸烯的氢甲酰化反应具有好的催化活性.在100℃、4 MPa、甲苯为溶剂的条件下,催化1-癸烯氢甲酰化可获得93.0%的转化率,95.8%的醛的选择性,2.1的正异比,137 h-1的TOF值.并对不同链长烯烃底物进行了考察.随着烯烃碳链的增加,醛的选择性下降,但是正异比有所增加.     

超细SiO2负载型水溶性铑膦配合物催化剂研究

用超细SiO2负载水溶性铑膦配合物,并研究其对1-已烯氢甲酰化的催化性能。结果表明,粒径为10-20nm的超细SiO2负载水溶性铑膦配合物所表现的催化活性比颗粒SiO2负载型催化剂高3倍多,且可在较宽的含水量范围内保持高反应活性。当膦铑摩尔比为50,超细SiO2负载型催化剂含水量为25%-55%（质量分数）、烯铑摩尔比为2500、反应温度373K和CO/H2（1/1,体积比）压力4.0MPa的反应条件下,其1-已烯氢甲酰化的反应转化数为450h^-1,产物醛的选择性为100%,醛的n/i比值达3.2。     

膦配体修饰的Rh／SiO2用于3-戊烯酸甲酯氢甲酰化反应

制备了膦配体修饰的Rh/SiO2多相催化剂(L-Rh/SiO2),该催化剂在内烯烃氢甲酰化制备正构醛反应中表现出了高活性和高区域选择性,而且在高压釜反应器中可以通过简单的过滤与产物分离.通过使用不同的单齿和螯合双齿膦配体考察了配体的电子及空间效应对L-Rh/SiO2催化剂催化性能的影响。     

新型负载水相催化剂（SAPC）的制备及其在丙烯氢甲酰化反应中的应用

以新型水溶性二磺化 - 1-苯基二苯并膦 (简称 PDBPDS)为配体 ,制备了铑膦配合物 Rh(acac) (CO ) -(PDBPDS) 3.将其负载于高吸水性载体上 ,制得负载水相催化剂 ,并对催化剂的制备条件进行了优化 .以人造沸石为载体 ,在载水量 30 % ,[Rh]=2 .0× 10 - 5、 [P]/ [Rh]=40的条件下 ,筛选出丙烯氢甲酰化反应的最佳工艺条件 .在反应温度 10 0℃、压力 2 .0 MPa、搅拌速度为 5 0 0 r/ m in条件下 ,催化剂活性达 10 12 g丁醛 / (g Rh· h) ;正异比高达 43.5 ;在有机相中铑的浓度为 1.2× 10 - 9,解决了均相反应催化剂回收和循环使用的问题 .实验结果表明 ,新型配体二磺化 - 1-苯基二苯并膦是一性能较好的新配体 ,所制备的新型负载水相催化剂是一有较好开发前景的新型催化剂     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).