Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

A new solid-phase extraction disk based on a sheet of single-walled carbon nanotubes

A new kind of solid-phase extraction disk based on a sheet of single-walled carbon nanotubes (SWCNTs) is developed in this study. The properties of such disks are tested, and different disks showed satisfactory reproducibility. One liter of aqueous solution can pass through the disk within 10–100 min while still allowing good recoveries. Two disks (DD-disk) can be stacked to enrich phthalate esters, bisphenol A (BPA), 4-n-nonylphenol (4-NP), 4-tert-octylphenol (4-OP) and chlorophenols from various volumes of solution. The results show that SWCNT disks have high extraction ability for all analytes. The SWCNT disk can extract polar chlorophenols more efficiently than a C₁₈ disk from water solution. Unlike the activated carbon disk, analytes adsorbed by the new disks can be eluted completely with 8–15 mL of methanol or acetonitrile. Finally, the DD-disk system is used to pretreat 1000-mL real-world water samples spiked with BPA, 4-OP and 4-NP. Detection limits of 7, 25, and 38 ng L⁻¹ for BPA, 4-OP, and 4-NP, respectively, were achieved under optimized conditions. The advantages of this new disk include its strong adsorption ability, its high flow rate and its easy preparation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mixed hemimicelles solid-phase extraction based on cetyltrimethylammonium bromide-coated nano-magnets Fe3O4 for the determination of chlorophenols in environmental water samples coupled with liquid chromatography/spectrophotometry detection

Mixed hemimicelles solid-phase extraction (SPE) based on cetyltrimethylammonium bromide (CTAB)-coated nano-magnets Fe3O4 was investigated for the preconcentration of four chlorophenols (CPs) in environmental water samples prior to HPLC-spectrophotometry determination in this paper. By the rapid isolating (about 5 min) of Fe3O4 nanoparticles (NPs) through placing a Nd-Fe-B strong magnet on the bottom of beaker, the time-consuming preconcentration process of loading large volume sample in conversional SPE method with a column can be avoided. The unique properties of Fe3O4 NPs such as high surface area and strong magnetism were utilized adequately in the SPE process. This novel separation method produced a high preconcentration rate and factor. A comprehensive study of the adsorption conditions such as the Fe3O4 NPs zeta-potential, CTAB added amounts, pH value, standing time and maximal extraction volume was also presented. Under optimized conditions, four analytes of 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) were quantitatively extracted. The method was then used to determine four CPs in five real environmental water samples. High concentration factors (700) were achieved for each of the analytes, with observed detection limits ranging between 0.11 and 0.15 microg L(-1). The accuracy of method was evaluated by recovery measurements on spiked samples. Good recovery results (83-98%) with satisfactory relative standard deviation (RSD) were achieved. It is important to note that satisfactory preconcentration factors and extraction recoveries for the four CPs were obtained with only a little amount of Fe3O4 NPs (0.1g) and CTAB (60 mg). To the best of our knowledge, this was the first time a mixed hemimicelles SPE method based on Fe3O4 NPs magnetic separation had been used for the pretreatment of environmental water samples.     

Preparation of Fe3O4@C@PANI magnetic microspheres for the extraction and analysis of phenolic compounds in water samples by gas chromatography-mass spectrometry

In this work, core-shell structure Fe(3)O(4)@C@polyaniline magnetic microspheres were synthesized using simple hydrothermal reactions. The carbon-coated magnetic microspheres (Fe(3)O(4)@C) were first synthesized by a hydrothermal reaction, and then aniline was polymerized on the magnetic core via another hydrothermal reaction. Then, the obtained Fe(3)O(4)@C@polyaniline magnetic microspheres were applied as magnetic adsorbents for the extraction of aromatic molecules due to π-π interactions between polyaniline shell and aromatic compounds. In our study, five kinds of phenols including phenol, 2,4-dichlorophenol (DCP), 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) and bisphenol A (BPA) were selected as the model analytes to verify the extraction ability of Fe(3)O(4)@C@PANI microspheres. After derivatization, the phenols were detected using gas chromatography-mass spectrometry (GC-MS). The dominant parameters affecting enrichment efficiency were investigated and optimized. Under the optimal conditions, the proposed method was evaluated, and applied to the analysis of phenols in real water samples. The results demonstrated that our proposed method based on Fe(3)O(4)@C@polyaniline magnetic microspheres had good linearity (r(2)>0.991), and limits of quantification (2.52-29.7 ng/mL), high repeatability (RSD<13.1%) and good recovery (85.3-110.6%).     

高效液相色谱法测定大鼠组织中双酚A和4-壬基酚浓度

建立了大鼠组织中双酚A和4-壬基酚的提取和含量测定方法。大鼠组织样品经甲醇-乙酸铵缓冲液匀浆、 正己烷-乙醚混合溶剂提取、氮气吹干后用流动相溶解,以乙腈-0.01 mol/L乙酸铵缓冲液(pH 4.5)(体积比为75∶25)为流动相,经C18色谱柱分离,在激发波长227 nm、发射波长313 nm下进行荧光检测。大鼠心、脑、肝和肾脏组织样品中,双酚A的检出限为3.2~4.6 ng/g,4-壬基酚的检出限为11.8~15.6 ng/g;日内检测精密度为0.89%~4.50%,日间检测精密度为3.10%~12     

分子印迹磁性固相萃取/液相色谱法检测奶制品中的双酚A

以双酚A(BPA)为模板分子,磁性二氧化硅(Fe_3O_4@SiO_2)为载体,4-乙烯基吡啶(4-VP)为功能单体,采用表面分子印迹技术制备了双酚A磁性分子印迹聚合物微球(Fe_3O_4@SiO_2-MIPs)。通过红外光谱、透射电镜等对Fe_3O_4@SiO_2-MIPs进行了结构和形貌的表征。将制得的Fe_3O_4@SiO_2-MIPs作为磁性吸附剂,分离富集奶制品中的BPA,建立了分子印迹磁性固相萃取/液相色谱法测定奶制品中BPA的新方法。结果表明,在优化条件下,Fe_3O_4@SiO_2-MIPs对BPA具有良好的选择性,最大吸附容量达13.50 mg/g,在0.05~5.0 mmol/L浓度范围内有良好的线性关系(r2=0.993 4),方法检出限为0.037μg/L,样品加标回收率为86.2%~93.1%,相对标准偏差为2.9%~3.8%。该方法高效快速,选择性好,可用于牛奶样品中痕量BPA的检测。     

Modifying the surface of Fe3O4/SiO2 magnetic nanoparticles with C18/NH2 mixed group to get an efficient sorbent for anionic organic pollutants

In this article, C(18)/NH(2) mixed group modified Fe(3)O(4)/SiO(2) magnetic nanoparticles (Fe(3)O(4)/SiO(2)/C(18)+NH(2) MNPs) were successfully synthesized and used for the extraction of perfluorinated compounds (PFCs) from large volume of water solution. The Fe(3)O(4)/SiO(2)/C(18)+NH(2) MNPs, about 25 nm in diameter, possess high extraction ability to the anionic organic pollutants due to the dual function of hydrophobic octadecyl group and cationic aminopropyl groups at low pH. More than 90% of the targets can be extracted from 500 mL of water solution with 0.1g of the MNP sorbent at pH 3. Twenty min is sufficient to reach adsorption equilibrium, and the targets can be desorbed from the sorbent readily with 12 mL of alkalized methanol after magnetic separation. Simplified extraction procedure could be achieved because of the superparamagnetism and high saturation magnetization of the sorbent (44 emu g(-1)). Therefore, preconcentration of trace level of PFCs from water solution can be performed by using this Fe(3)O(4)/SiO(2)/C(18)+NH(2) MNP sorbent which are stable for multiple reuses.     

A core-shell magnetic mesoporous silica sorbent for organic targets with high extraction performance and anti-interference ability

C(18)-functionalized mesoporous silica shell was successfully fabricated on the surface of an Fe(3)O(4)/SiO(2) core to obtain an Fe(3)O(4)/SiO(2)/SiO(2)-C(18) magnetic microsphere. The microsphere exhibited high extraction efficiency to organic targets and strong anti-interference ability to natural organic matter. It could be easily isolated from water solution after extraction.     

Determination of endocrine-disrupting compounds in environmental samples using gas and liquid chromatography with mass spectrometry

This paper describes certain applications for endocrine-disrupting compounds determination. LC-MS was applied using an electrospray ionization (ESI) technique in positive mode for alcohol polyethoxylates and nonylphenol and octylphenol polyethoxylates (NPEOn and OPEOn), and in negative mode for 4-nonylphenol (4-NP) and 4-octylphenol (4-OP) to determine targeted compounds in wastewater and sludge. GC-MS and GC-MS-MS were used to determine 4-NP, 4-tert.-octylphenol (4-t-OP), bisphenol A, estradiol-17beta, estriol estrone, testosterone, 17alpha-ethynylestradioL cholesterol, coprostan-3-ol, coprostan and coprostan-3-one in both surface water and wastewater after derivatization with N,O-bis(trimethyl-silyl)trifluoroacetamide (BSTFA). Extraction from the water samples was by an SPE technique, using either a copolymeric (Oasis HLB) or C18 silica sorbents, depending on the target contaminants. Extraction from the sludge samples was by a Soxtec system using methanol. Percentage recoveries for most of the selected compounds, using either a copolymeric (Oasis HLB) or C18 silica sorbents, were satisfactory (>60%). Quantification limits for the target compounds were at ppb levels in both water and sludge samples when using LC-ESI-MS in both positive and negative modes. They reached ppt levels in water when using GC-MS (in large volume injection mode) and GC-MS-MS. The results revealed 4-NP, NPEOn and AEOs in sludge samples at a concentration range of 1.3-8.5 microg/g, and NPEOn, OPEOn and other compounds, such as coprostan and bisphenol A, in surface water and/or wastewater samples at concentrations ranging from the ppt to ppb levels.     

Synthesis of Fe3O4@phenol formaldehyde resin core-shell nanospheres loaded with Au nanoparticles as magnetic FRET nanoprobes for detection of thiols in living cells

A magnetic, sensitive, and selective fluorescence resonance energy transfer (FRET) probe for detection of thiols in living cells was designed and prepared. The FRET probe consists of an Fe(3)O(4) core, a green-luminescent phenol formaldehyde resin (PFR) shell, and Au nanoparticles (NPs) as FRET quenching agent on the surface of the PFR shell. The Fe(3)O(4) NPs were used as the core and coated with green-luminescent PFR nanoshells by a simple hydrothermal approach. Au NPs were then loaded onto the surface of the PFR shell by electric charge absorption between Fe(3)O(4)@PFR and Au NPs after modifying the Fe(3)O(4)@PFR nanocomposites with polymers to alter the charge of the PFR shell. Thus, a FRET probe can be designed on the basis of the quenching effect of Au NPs on the fluorescence of Fe(3)O(4)@PFR nanocomposites. This magnetic and sensitive FRET probe was used to detect three kinds of primary biological thiols (glutathione, homocysteine, and cysteine) in cells. Such a multifunctional fluorescent probe shows advantages of strong magnetism for sample separation, sensitive response for sample detection, and low toxicity without injury to cellular components.     

磁载光催化剂TiO2/SiO2/Ni0.5Fe2.5O4的制备及其催化氧化性能

采用固相反应法制备磁载体(SiO₂/Ni_0.5Fe_2.5O₄),溶胶-凝胶法得到易于磁分离回收的磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄。用XRD、SEM、IR和UV-Vis等进行表征。研究了太阳光下催化剂对亚甲基蓝溶液的脱色性能。结果表明,在太阳光下,磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄可使亚甲基蓝溶液迅速脱色；3次循环使用后脱色率仍为95%以上,回收率为98.8%。     

Novel Ag2S nanoparticles on reduced graphene oxide sheets as a super-efficient catalyst for the reduction of 4-nitrophenol

Here,Ag_2S nanoparticles on reduced graphene oxide(Ag_2S NPs/RGO) nanocomposites with relatively good distribution are synthesized for the first time by conversing Ag NPs/RGO to Ag_2S NPs/RGO via a facile hydrothermal sulfurization method.As an noval catalyst for the reduction of 4-nitrophenol(4-NP),it only takes 5 min for Ag_2S NPs/RGO to reduce 98% of 4-NP,and the rate constant of the composites is almost 13 times higher than that of Ag NPs/RGO composites.The high catalytic activity of Ag_2S NPs/RGO can be attributed to the following three reasons:(1) Like metal complex catalysts,the Ag_2S NPs is also rich with metal center Ag(δ~+),with pendant base S(δ) close to it,and thus the Ag and basic S function as the electron-acceptor and proton-acceptor centers,respectively,which facilitates the catalyst reaction;(2)RGO features the high adsorption ability toward 4-NP which provides a high concentration of 4-NP near the Ag_2S NPs;and(3) electron transfer from RGO to Ag_2S NPs,facilitating the uptake of electrons by 4-NP molecules.     

Ranolazine-functionalized CuO NPs: efficient homogeneous and heterogeneous catalysts for reduction of 4-nitrophenol

In the present study copper oxide nanoparticles (CuO NPs) were synthesized using a hydrothermal method with ranolazine as a shape-directing agent. Ranolazine-functionalized CuO NPs were characterized by various analytical techniques such as scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The SEM pattern confirmed the morphology of ranolazine-functionalized CuO NPs with well-defined rice-like structures. FTIR spectroscopy confirmed the interaction between CuO NPs and ranolazine. The XRD analysis indicated that the structure of ranolazine-functionalized CuO NPs was monoclinic crystalline and the size ranged between 9 and 18 nm with an average particle size of 12 nm. The smaller size range of CuO NPs gave a large surface area that enhanced the efficiency of these catalysts employed for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the H ₂ O system. In homogeneous catalysis, results showed that 50 μL of CuO NPs was required in the presence of NaBH4 for 99% reduction of 4-NP in 240 s. On the other hand, for heterogeneous catalysis, 0.5 mg of CuO NPs was used in the presence of NaBH4 for 99% catalytic reduction of 4-NP to 4-AP in 320 s. The rate of reaction for homogeneous catalysis and heterogeneous catalysis was determined from the plots of In(Ct /C0) of 4-NP versus time (s), which showed good linearity with values of 1.3 × 10 ^-2 and 8.8 × 10 ^-3 s ^-1 . respectively. The high-quality catalytic efficiency, good reusability, nontoxic nature, and low cost are favorable properties of the synthesized CuO NPs for use as efficient catalysts for reduction of 4-AP to 4-NP in both homogeneous and heterogeneous media.     

Preparation and characterization of thermosensitive polymers grafted onto silica-coated iron oxide nanoparticles

In this study, multifunctional nanoparticles containing thermosensitive polymers grafted onto the surfaces of 6-nm monodisperse Fe(3)O(4) magnetic nanoparticles coated by silica were synthesized using reverse microemulsions and free radical polymerization. The magnetic properties of SiO(2)/Fe(3)O(4) nanoparticles show superparamagnetic behavior. Thermosensitive PNIPAM (poly(N-isopropylacrylamide)) was then grafted onto the surfaces of SiO(2)/Fe(3)O(4) nanoparticles, generating thermosensitive and magnetic properties of nanocomposites. The sizes of fabricated nanoparticles with core-shell structure are controlled at about 30 nm and each nanoparticle contains only one monodisperse Fe(3)O(4) core. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles measured using DSC was at around 34-36 degrees C. The magnetic characteristics of these multifunctional nanoparticles were also superparamagnetic.     

硬脂酸法制备SO42-/Fe2O3-SiO2固体酸及其催化性能的初步探讨

首次用硬脂法制备了Fe2O3-SiO2混合氧化物,经浸渍H2SO4后再焙烧得SO4^2-/Fe2O3-SiO2固体酸催化剂。用TEM,XRD,N2吸附/脱附和TG-DTA等手段对其进行了表征,结果显示制得的Fe2O3-SiO2混合氧化物具有多孔结构,且随着Si含量的增大,其比表面积明显增大,但孔径减小。用乙酸/丁醇酯化催化反应评估了该固体酸的催化性能。     

非水毛细管电泳-化学发光法测定食品包装材料中酚类环境激素

建立食用包装材料中的双酚A、壬基酚等多种环境激素的非水毛细管电泳-化学发光分析方法.食品包装材料样品浸出物中的双酚A、烷基酚等环境激素经衍生剂DIB-Cl衍生后,经过非水毛细管电泳分离后,分别与过氧草酸酯化学发光反应体系作用,光信号经过光电倍增管接收放大后被检测.以雌二醇(17β-E2)为内标,以相对迁移时间定性,相对发光强度比定量,内标校准曲线法测定样品浸出物中待测物的含量.对影响非水毛细管电泳分离如溶剂组成和比例、电解质浓度、温度、乙酸浓度、电泳电压等条件进行了优化.同时对化学发光体系也进行了优化.4-叔丁基酚、双酚A、4-叔辛基酚、4-壬基酚和四溴双酚 A分别在0.0095～3.0 mg/L, 0.0087～3.0 mg/L, 0.0085～3.0 mg/L, 0.011～3.0 mg/L和0.009～3.0 mg/L范围内线性良好,r＞0.9947.相对迁移时间和相对峰高的RSD分别为0.88%～2.96%和 6.54%～8.57%.加标回收率为86.7%～98.8%.对5种常见的食品包装材料样品进行了测定, 所建立的方法简便、快速、灵敏,适合于食品包装材料中酚类环境激素的检测.     

Multifunctional Fe3O4/TaO(x) core/shell nanoparticles for simultaneous magnetic resonance imaging and X-ray computed tomography

Multimodal imaging is highly desirable for accurate diagnosis because it can provide complementary information from each imaging modality. In this study, a sol-gel reaction of tantalum(V) ethoxide in a microemulsion containing Fe(3)O(4) nanoparticles (NPs) was used to synthesize multifunctional Fe(3)O(4)/TaO(x) core/shell NPs, which were biocompatible and exhibited a prolonged circulation time. When the NPs were intravenously injected, the tumor-associated vessel was observed using computed tomography (CT), and magnetic resonance imaging (MRI) revealed the high and low vascular regions of the tumor.     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

A new ion-exchange adsorbent with paramagnetic properties for the separation of genomic DNA

A new ion-exchange adsorbent (IEA) derived from Fe(3)O(4)/SiO(2)-GPTMS-DEAE with paramagnetic properties was prepared. Fe(3)O(4) nanoparticles were firstly prepared in water-in-oil microemulsion. The magnetic Fe(3)O(4) particles were modified in situ by hydrolysis and condensation reactions with tetraethoxysilane (TEOS) to form the core-shell Fe(3)O(4)/SiO(2). The modified particles were further treated by 3-glycidoxypropyltrimethoxysilane (GPTMS) to form Fe(3)O(4)/SiO(2)-GPTMS nanoparticles. Fe(3)O(4)/SiO(2)-GPTMS-DEAE nanoparticles (IEA) were finally obtained through the condensation reaction between the Cl of diethylaminoethyl chloride-HCl (DEAE) and the epoxy groups of GPTMS in the Fe(3)O(4)/SiO(2)-GPTMS. The obtained IEA has features of paramagnetic and ion exchange properties because of the Fe(3)O(4) nanoparticles and protonated organic amine in the sample. The intermediates and final product obtained in the synthesis process were characterized. The separation result of genomic DNA from blood indicated that Fe(3)O(4)/SiO(2)-GPTMS-DEAE nanoparticles have outstanding advantages in operation, selectivity, and capacity.     

Nano-Fe3O4@SiO2–TiCl3 as a novel nano-magnetic catalyst for the synthesis of 4H-pyrimido[2,1-b]benzothiazoles

Research on Chemical Intermediates - Fe3O4@SiO2–TiCl3 NPs, a novel core shell catalyst, was synthesized via preparing Fe3O4@SiO2 as a magnetic support followed by treatment with titanium...