铕配合物共掺杂电致发光器件效率滚降的延缓(英文)

将Alq3[tris(8-hydroxyquinoline)aluminium]和Eu(TTA)3phen(TTA=thenoyltrifluoroacetone,phen=1,10-phenanthroline)共掺杂进入主体材料CBP(4,4′-N,N′-dicarbazole-biphenyl)中,我们制作并研究了一系列电致发光器件。经过优化Alq3的掺杂浓度,在不改变色纯度的情况下,器件的效率滚降被大幅降低并获得了近乎加倍的最大亮度。发光层中的Alq3分子不仅促进了电子的注入和传输,还延缓了空穴的传输。借助电致发光光谱,我们证实Alq3分子作为阶梯加速空穴从CBP分子到Eu(TTA)3phen分子的迁移,从而促进了电子和空穴在Eu(TTA)3phen分子上的平衡。因此,我们认为器件的效率滚降受到抑制的原因有两点:一是复合区间的加宽,二是Eu(TTA)3phen分子上空穴和电子的分布更加平衡。     

一种双核铕配合物的合成、光致发光和电致发光性质研究

合成了一个新的双核铕配合物Eu(TTA)₃(tpphz)Eu(TTA)₃(其中TTA＝去质子化的α-噻吩甲酰三氟丙酮; tpphz＝[3,2-a:2',3'-c:3',2'-h:2'',3''-j]四吡啶基吩嗪). 研究了该配合物的光致发光和电致发光性质. 一个四层电致发光器件ITO/TPD, 10 nm/Eu(TTA)₃(tpphz)Eu(TTA)₃, 20 nm/BCP, 20 nm/AlQ, 40 nm/Mg_0.9Ag_0.1, 200 nm/Ag, 100 nm表现出中心在633 nm处的宽带红光发射, 该宽带发射可能来源于双核Eu(III)配合物和TPD形成的激基复合物. 该器件的启动电压为10 V, 在18 V和135 mA/cm²时的最大亮度达146 cd/m².     

内含C60掺杂空穴传输层的量子点电致发光器件

聚乙烯咔唑（PVK）中掺入富勒烯（C₆₀）的重量比从0%到10%变化,以研究在空穴传输层中掺杂C₆₀后对量子点电致发光器件性能的影响。掺入C₆₀后的PVK薄膜在氧化铟锡（ITO）基底上均方根粗糙度从3nm降至1.6nm。另外,掺入C₆₀后有利于空穴的注入和传输,改善器件中电子和空穴的平衡,提高了器件的效率。     

含氟绿光铱配合物的设计、合成及其高效磷光电致发光器件

以2-(3-(2',4'-二氟苯基)苯基)吡啶(Hdfbppy)为环金属C^N配体,乙酰丙酮(Hacac)为辅助配体,设计合成了一种绿色磷光铱配合物(Ir(dfbppy)₂(acac));研究了此配合物的光物理性质及其电致发光器件性能。室温下,配合物Ir(dfbppy)₂(acac)的二氯甲烷溶液的最大发射波长为520nm,量子效率为71%,寿命为381ns。将此配合物掺杂在4,4'-N,N'-二咔唑基二联苯(CBP)中,作为发光层制备了有机发光二极管器件。结果显示,该器件在7.2V电压下呈现的最大亮度为68324cd·m^-2,最大电流效率约为53cd·A^-1,最大功率效率为37lm·W^-1,色坐标为(0.33,0.62)。     

石墨相氮化碳在光催化苯甲醛氧化耦合制氢领域的研究进展

石墨相氮化碳(g-C₃N₄)是一类非金属聚合物半导体材料, 具有良好的可见光响应、 优异的化学稳定性和可调节的能带结构, 在光催化分解水制氢、 空气净化、 环境修复等领域有着广阔的应用前景. 目前, g-C₃N₄光催化分解水的研究主要聚焦析氢半反应, 而牺牲试剂的氧化反应以及光生空穴则未被加以利用. 光催化苯甲醇氧化反应具有较高的选择性, 在光催化制氢的同时还能够获得苯甲醛. 我们结合最新国内外研究成果, 系统地综述了g-C₃N₄在光催化苯甲醇氧化耦合制氢方面的应用, 从分子改性、 显微结构及缺陷调控、 非金属元素掺杂、 金属负载和复合材料设计等5个方面介绍了g-C₃N₄光催化苯甲醇氧化提升性能的研究策略. 重点总结了g-C₃N₄的结构和光生载流子分离效率对催化性能的影响, 并对g-C₃N₄光催化苯甲醛氧化耦合制氢的后续发展进行了展望.     

含叠氮酸根的锰(Ⅱ)配合物的合成与晶体结构

Two new mononuclear Mn(Ⅱ) complexes Mn(phen)₂(N₃)₂ (1) and [Mn(phen)₂(N₃)(H₂O)]ClO₄·H₂O (2) have been synthesized and structurally characterized, where phen is 1,10-phenanthroline. Complex 1 crystallizes in the P1 space group, with lattice parameters a=8.1688(2)?, b=11.1218(2)?, c=12.6881(2)?, α=83.558(3)°, β=82.287(3)°, γ=73.643(3)°, V=1092.7(4)?³, D_c=1.518Mg·m^-3, Z=2, F(000)=510, R₁=0.0620, wR₂=0.0958 (based on F²), S=0.981. Complex 2 crystallizes in the P1 space group, with lattice parameters a=8.6543(2)?, b=8.9767(2)?, c=17.5915(4)?, α= 93.399(3)°, β=102.806(3)°, γ=106.234(3)°, V=1268.7(4)?³, D_c=1.552Mg·m^-3, Z=2, F(000)=606, R₁=0.0672, wR₂=0.1781 (based on F²), S=1.047. In complex 1, the Mn atom is coordinated by six nitrogen atoms of two phen molecules and two N₃^- ions with the Mn-N distances ranging from 2.142(4) to 2.318(4)?. The coordinated phen molecules of the adjacent Mn(phen)₂(N₃)₂ moieties experience π-π stacking which is responsible for the crystal packing. In complex 2, the Mn atom is coordinated by five nitrogen atoms of two phen molecules and one N₃^- ion with the Mn-N distances ranging from 2.152(5) to 2.291(5)?. The approximately octahedral environment was completed by the oxygen atom of the coordinated water molecule with the Mn-O distance of 2.180(5)?. The hydrate water molecule is hydrogen-bonded to one of the O atoms of free ClO₄^- anion. ?     

基于面式-三(2-(4-三氟甲基苯基)吡啶)合铱配合物为发光中心的高效绿光有机电致发光器件

用经典的方法合成了面式-三(2-(4-三氟甲基苯基)吡啶)合铱配合物(fac-Ir(tfmppy)₃), 并得到了其晶体结构。在CH₂Cl₂溶液中Ir(tfmppy)₃的发射光谱显示出了峰值位于525 nm的π→π^*跃迁吸收以及金属到配体电荷转移(MLCT)吸收, 色坐标(CIE)为(0.31, 0.62), 量子效率计算为4.59%(以Ru(bpy)₃]Cl₂为参照)。以Ir(tfmppy)₃为发光中心, 制备并研究了有机电致发光器件:ITO/TAPC (60 nm)/Ir(tfmppy)₃ (x%):mCP (30 nm)/TPBi (60 nm)/LiF (1 nm)/Al (100 nm)。4%掺杂浓度的器件在4 197 cd·m^-2的亮度下显示的最大电流效率为33.95 cd·A^-1, 在12.7 V时的最大亮度为43 612 cd·m^-2, 色坐标(CIE)为(0.31, 0.61)。利用瞬态电致发光法(transient electroluminescence (EL))、在1 300 (V·cm^-1)^1/2的电场强度下Ir(tfmppy)₃配合物的电子迁移率测定为4.24×10^-6 cm²·(V·s)^-1。非常接近于常用的电子传输材料八羟基喹啉铝(Alq₃)的电子迁移率。     

介孔氧化硅孔径尺寸对Eu(Ⅲ)配合物的影响

分别以十六烷基三甲基溴化铵(CTAB)和聚乙氧基-聚丙氧基-聚乙氧基三嵌段共聚物(P123)为模板剂、正硅酸乙酯(TEOS)为硅源，采用水热法合成了有序介孔分子筛MCM-41和SBA-15。选择Eu(DBM)₃phen为客体，有序介孔氧化硅MCM-41和SBA-15为载体，分别在氯仿中进行分子组装，制备出具有较强发光性能的介孔复合材料Eu(DBM)₃phen/APTES-MCM-41(EAM)和Eu(DBM)₃phen/APTES-SBA-15(EAS)。采用XRD、TEM、N₂吸附-脱附和荧光光谱等对产物的结构与性能进行了分析。结果表明，Eu(DBM)₃phen组装进有序介孔氧化硅的孔道中后，发光纯度提高。而且孔径越小，发光纯度越高。选用较大孔径的SBA-15为载体，在不显著影响发光纯度的同时，可以获得较高的发光强度。     

轻希土与2－噻吩甲酰三氟丙酮和1, 10－二氮杂菲配合物的合成及荧光光谱

本文采用溶剂萃取法和乙醇-水溶液析出法合成了六种轻希土与2-噻吩甲酰三氟丙酮(HTTA)和1,10-二氮杂菲(phen)三元配合物.通过元素分析、红外光谱、热重及荧光光谱等测试手段,考察了配合物有关性质,并确定了其组成为RE(TTA)₃phen和RE(TTA)₃phen·H₂O(RE=La、Ce、Pr、Nd、Sm、Eu).     

Eu(C10H9N2O4)(C10H8N2O4)(H2O)3]•0.5bipy•3H2O配合物的合成、晶体结构及荧光性质

在水-乙醇混合体系中, 以2-羰基丙酸水杨酰腙(C₁₀H₁₀N₂O₄)、2,2-联吡啶(C₁₀H₈N₂, 简写bipy)与Eu(NO₃)₃•4H₂O反应, 首次培养出黄色单晶[Eu(C₁₀H₉N₂O₄)(C₁₀H₈N₂O₄)(H₂O)₃]•0.5bipy•3H₂O. 该晶体属三斜晶系, 空间群为P-1, 晶胞参数a＝0.93392(16) nm, b＝1.3100(2) nm, c＝1.3895(2) nm, α＝97.205(3)°, β＝105.411(2)°, γ＝106.364(2)°, V＝15.35(2) nm³, Z＝2, μ＝2.118 mm^－1, D_c＝1.686 Mg/m³, F(000)＝786, R＝0.0116, wR＝0.0507, GOF＝0.995. 晶体测试结果表明, 该单晶结构为铕的9配位配合物, 两个2-羰基丙酸水杨酰腙分别以负一价和负二价酮式和三个水分子同时参与配位; 每个2-羰基丙酸水杨酰腙中的羧基氧、酰胺基中的羰基氧和C＝N中的氮与Eu^3＋配位, 形成两个共边的稳定五元环, 另三个配位原子则分别来自三个水分子中的氧原子, 该配合物在空间呈扭曲的单帽四方反棱柱, 而在不对称单位中还有游离的一个2,2-联吡啶分子和三个水分子, 这些游离分子与配位分子之间存在大量分子内和分子间氢键, 整个分子在空间呈三维网状结构. 发光性能测试表明该配合物具有很好的荧光性质.     

Synthesis and Optical Properties of Europium‐Complex‐Doped Inorganic/Organic Hybrid Materials Built from Oxo–Hydroxo Organotin Nano Building Blocks

Hybrid materials doped with novel europium complexes were synthesized using PMMA‐co‐Sn₁₂Clusters (copolymers from oxohydroxo‐organotin dimethacrylate and methylmethacrylate) as the matrix material. Two types of hybrid materials were obtained: the physically doped product, PMMA‐co‐Sn₁₂Cluster/Eu(TTA)₃phen, and the grafted product, PMMA‐co‐Sn₁₂Cluster‐co‐[EuAA(TTA)₂phen] (TTA=2‐thenoyltrifluoroacetone, phen=phenanthroline and AA=acrylic acid). The hybrid materials exhibited characteristic luminescence of the Eu³⁺ ions, and also showed relative especial optical properties compared with samples just using PMMA as the matrix material. The PMMA‐co‐Sn₁₂Cluster matrix exhibited a high physical doping quantity of [Eu(TTA)₃phen], which can be attributed to the special structure of this kind of hybrid material. GPC (gel‐permeation chromatography), TGA (thermogravimetric analysis), SEM, ¹H NMR, ICP (inductively coupled plasma), ¹¹⁹Sn NMR, FTIR, and diffuse reflectance techniques were employed to characterize the structures and properties of these hybrid materials.     

pH and concentration dependence of luminescent characteristics in glass-encapsulated Eu-complex

In order to improve the stability of red phosphor with efficient and high color-purity characteristics under ultraviolet excitation, we encapsulated Eu(TTA)₃phen(tris(2-thenoyltrifluoroacetonato)(1,10-phenanthroline)europium(III)) by sol–gel derived silica glasses and studied their photoluminescence (PL) characteristics. The dependence of pH values in the starting solution revealed that the process condition should be within the modest region with the optimum pH value around 6–7. The PL intensity increased with increasing the concentration of Eu(TTA)₃phen initially, then it showed saturating tendency above 0.6 mol%. An improvement of reliability by the glass encapsulation was exemplified by monitoring the long-term PL intensity under constant UV irradiation. We consider that the glass network carefully prepared by sol–gel process is effective for preventing free oxygen and water from attacking Eu(TTA)₃phen molecule without loss of PL output.     

Photochemical production of electroluminescent image

A polymer containing donorN-epoxypropylcarbazolyl groups and the acceptor tris(8-quinolinolato) aluminum (Alq₃) was shown to form a light-sensitive, acid-producing polymeric composition. The acid in the presence of 8-quinolinol (8-hydroxyquinoline) ensured photochemical dissolution of aluminum in the polyeric layer, yielding additionally organic aluminum complexes, such as Alq₃, Alq²⁺, and Alq ₂ ⁺ , and Alq₃-con-taining polymers. This led to a emergence of electroluminescence (EL) upon application of a potential difference to a sandwich diode representing transparent anode/exposed polymer layer/aluminum cathode. Electroluminescence did not appear at an Alq₃ concentration of 6 wt % and less in the composition, and only partial dissolution of the aluminum film after its deposition on the exposed polymeric layer provided the emergence of EL whose intensity increased with increasing the dose absorbed by the polymer. The addition of the chemical sensitizer dimethylaminobenzaldehyde to the composition triggered the conventional process of chemical amplification which consists in thermal buildup of the acid in exposed area. This provided a significant increase in concentration of organoaluminum complexes and enhancement of EL intensity.     

Crystal structure and fluorescence spectrum of the complex [Eu(III)(TTA)3(phen)]

The title complex Eu(III)(TTA)₃(phen) (where TTA = thenoyltrifluoroacetone monoanion; phen = 1,10-phenanthroline) has been synthesized in mixed solvents of acetone and ethanol (1:1 volume ratio) and its crystal structure has been determined by X-ray diffraction. The complex crystals are triclinic, space group P 1 (# 2) with cell dimensions of a = 1.32.41 (2) nm, b = 1.5278(4) nm, c = 0.9755(3) nm, α = 92.49 (2)°, β = 102.57(2)°, γ = 91.62(2)°, V = 1.9268(8) nm³, Z = 2, μ (Mo Ka)= 18.77 cm^?1, D_x=1.720 g/cm³. The coordination geometry of Eu atom is a distorted square antiprism, and the encapsulated structure that can meet the structural requirement of the typical europium luminescent sensor. The fluorescence spectrum suggests that the complex is a strong photoluminescent material.     

Synthesis and characterization of a strong-fluorescent Eu-containing hydrotalcite-like compound

A novel strong-fluorescent Eu-containing hydrotalcite-like compound (Eu-HTlc) was synthesized using the coprecipitation method, in which aluminum(III) was partially substituted by Europium (III) in the hydrotalcite-like layers, and thenoyltrifluoroacetone, 1,10-phenanthroline were dispersed into the anions in the interlayer region. The sample was characterized by XRD, XPS, FT-IR, ICP, TG-DSC, TEM and fluorescence spectra, and its composition and structure were determined. The results indicated that the sample exhibited a characteristic red light (614 nm). The fluorescent lifetime and fluorescence quantum yield of Eu-HTlc were measured to be respectively 893 μs and 66.44%, higher than those of Eu(III)-thenoyltrifluoroacetone-1,10-phenanthroline complex [Eu(TTA)₃phen]. The result of TG-DSC measurement showed the enhanced thermal stability of Eu-HTlc compared with that of MgAl-LDHs and Eu(TTA)₃phen. With excellent photoluminescent property and thermal stability, low contents of rare earth ions and ligands, the Eu-HTlc may become one of the novel fluorescent materials with potential applications.     

Synthesis, characterization, and luminescence properties of the ternary europium complex covalently bonded to mesoporous SBA-15

A novel mesoporous SBA-15 type of hybrid material (phen-SBA-15) covalently bonded with 1,10-phenanthroline (phen) ligand was synthesized by co-condensation of tetraethoxysilane (TEOS) and the chelate ligand 5-[N,N-bis-3-(triethoxysilyl)propyl]ureyl-1,10-phenanthroline (phen-Si) in the presence of Pluronic P123 surfactant as a template. The preservation of the chelate ligand structure during the hydrothermal synthesis and the surfactant extraction process was confirmed by Fourier transform infrared (FTIR) and (29)Si MAS NMR spectroscopies. SBA-15 consisting of the highly luminescent ternary complex Eu(TTA)(3)phen (TTA = 2-thenoyltrifluoroacetone) covalently bonded to a silica-based network, which was designated as Eu(TTA)(3)phen-SBA-15, was obtained by introducing the Eu(TTA)(3).2H(2)O complex into the hybrid materials via a ligand exchange reaction. XRD, TEM, and N(2) adsorption measurements were employed to characterize the mesostructure of Eu(TTA)(3)phen-SBA-15. For comparison, SBA-15 doped with Eu(TTA)(3).2H(2)O and Eu(TTA)(3)phen complexes and SBA-15 covalently bonded with a binary europium complex with phen ligand were also synthesized, and were named SBA-15/Eu(TTA)(3), SBA-15/Eu(TTA)(3)phen, and Eu-phen-SBA-15, respectively. The detailed luminescence studies on all the materials showed that, compared with the doping sample SBA-15/Eu(TTA)(3)phen and binary europium complex functionalized sample Eu-phen-SBA-15, the Eu(TTA)(3)phen-SBA-15 mesoporous hybrid material exhibited higher luminescence intensity and emission quantum efficiency. Thermogravimetric analysis on Eu(TTA)(3)phen-SBA-15 demonstrated that the thermal stability of the lanthanide complex was evidently improved as it was covalently bonded to the mesoporous SBA-15 matrix.     

Synthesis, photophysical and oxygen-sensing properties of a novel Eu complex incorporated in mesoporous MCM-41

A novel Eu³⁺ complex of Eu(DPIQ)(TTA)₃ (DPIQ=10H-dipyrido [f,h] indolo [3,2-b] quinoxaline, TTA=2-thenoyltrifluoroacetonate) was synthesized and encapsulated in the mesoporous MCM-41, hoping to explore an oxygen-sensing system based on the long-lived Eu³⁺ emitter. The Eu(DPIQ)(TTA)₃/MCM-41 composites were characterized by infrared spectra (IR), ultraviolet-visible (UV-vis) absorption spectra, small-angle X-ray diffraction (SAXRD), luminescence intensity quenching upon various oxygen concentrations, and fluorescence decay analysis. The results indicated that the composites exhibited the characteristic emission of the Eu³⁺ ion and the fluorescence intensity of ⁵D₀-⁷F₂ obviously decreased with increasing oxygen concentrations. The oxygen sensing properties of the composites with different loading levels of Eu(DPIQ)(TTA)₃ complex were investigated. A sensitivity of 3.04, a short response time of 7 s, and good linearity were obtained for the composites with a loading level of 20 mg/g. These results are the best reported values for optical oxygen-sensing materials based on Eu³⁺ complexes so far.