生物亲和性壳聚糖-二氧化硅复合纳米粒子的合成及其吸附DNA特性研究

采用反相微乳液法制备了壳聚糖-二氧化硅复合纳米粒子,通过透射电镜（TEM）、红外光谱方法、Zeta电位实验等对所合成的复合纳米粒子的结构和性质等进行了表征.结果显示,基于壳聚糖与silica之间超分子作用所形成的复合纳米粒子呈规则的球形,粒径为50 nm左右,具有良好的单分散性和微孔结构,Zeta电位测定结果表明复合纳...     

两亲性壳聚糖衍生物的制备及其包覆量子点

以天然壳聚糖为功能性高分子的骨架,通过西弗碱还原法,以正辛醛和端醛基聚乙二醇单甲基醚(mPEG aldehyde,mPEG-ald)修饰壳聚糖,制备了具有亲疏水性质的N-辛基化-N-mPEG化壳聚糖衍生物(N-octyl-N-mPEG-chitosan,OPEGC),并且以此两亲性壳聚糖衍生物包覆量子点制备了水溶性聚合物量子点纳米粒子.用FTIR、1H-NMR对壳聚糖衍生物进行了结构表征.制备的水溶性胶束,用动态光散射(DLS)测试其流体力学直径与分布,研究了烷基链接枝比率对粒径大小的影响,研究结果表明:烷基链接枝率越高,聚合物胶束粒径越小.以芘为分子探针,通过荧光光谱法测定了壳聚糖衍生物的临界胶束浓度(CMC)为2.032×10-2mg/mL,并对水溶性聚合物量子点纳米粒子进行了紫外、荧光及形貌表征,结果表明得到了荧光发射产率高的聚合物量子点纳米粒子,且尺寸均一、水溶性好.     

一种新型季胺盐壳聚糖纳米载药体系的制备与性能

在制备壳聚糖衍生物N,N,N-三甲基壳聚糖盐酸盐(TMC)的基础上,通过将两种性质相反的电解质溶液进行共混,制备了一种新型的 TMC/CMC(羧甲基壳聚糖)纳米载药颗粒体系.用激光散射仪和透射电镜表征了空白颗粒和载药颗粒的粒径、粒径分布、Zeta 电位和形态结构.栽药体系纳米颗粒的粒径在 200～600 nm 范围,表面可带正或负电荷,且 Zeta 电位具有可调性.研究表明:牛血清蛋白(BSA)的包封率与起始的 TMC、BSA 浓度相关;纳米载药颗粒对 BSA 的释放表现为,先爆释而后缓释并可保持 40 h 以上的释放.     

大麦醇溶蛋白负载白藜芦醇自组装纳米颗粒及其性质研究

采用液-液分散法自组装大麦醇溶蛋白纳米颗粒,重点考察了溶剂(异丙醇)浓度、大麦醇溶蛋白浓度、溶液p H值及离子强度等因素对自组装纳米颗粒粒径和Zeta电位的影响。结果表明:在选择溶剂(异丙醇)浓度为55%,蛋白质浓度为66 mg/m L,分散液p H值为7.0,离子强度为0时,自组装出粒径为(70.0±1.8)nm,Zeta电位9 m V的大麦醇溶蛋白纳米颗粒。在此基础上,进一步制备了白藜芦醇-大麦醇溶蛋白复合纳米颗粒,考察了芯材比对复合纳米颗粒粒径、包封率及载药率的影响,结果表明,当芯材比为1∶5时,自组装复合纳米颗粒的粒径为(135.3±2.5)nm,Zeta电位为(18.91±0.02)m V,包封率为90.4%,载药率为18.8%。扫描电子显微镜结果表明,大麦醇溶蛋白纳米颗粒以及白藜芦醇-大麦醇溶蛋白复合纳米颗粒均为表面光滑的球形颗粒;傅立叶变换红外光谱结果表明,复合纳米颗粒中白藜芦醇与大麦醇溶蛋白之间还存在较强的氢键与静电相互作用。     

化学修饰法制备光敏性壳聚糖胶束及其光响应特性

首先通过在壳聚糖氨基上键合环氧丙醇,得到具有良好水溶性与油溶性的缩水甘油壳聚糖(GC),然后用琥珀酰化7-二乙基氨基-4-羟甲基香豆素作为光敏剂修饰GC制得壳聚糖衍生物SCGC,它具有光触发解组装性能。采用FT-IR与1 H-NMR对所得壳聚糖衍生物(SCGC)的结构进行表征,通过跟踪胶束在紫外光照下粒径与Zeta电位的变化研究SCGC的光敏性。结果表明:SCGC具有预期的化学结构,在水中可组装成胶束,芘荧光探针法测得胶束的临界聚集浓度(CAC)为0.07mg/mL。随光照时间的延长,SCGC胶束粒径不断增大,胶束表面负电性也随之增强。     

新型壳聚糖基自组装纳米胶束紫杉醇药物释放载体

以N-胆甾醇琥珀酰基-O-羧甲基壳聚糖(CCMC, 胆甾醇基取代度6.9%)为原料, 在水溶液中通过探头超声处理制备其自组装凝胶纳米胶束, 采用稳态荧光探针法考察临界胶束浓度, 并通过透射电镜和动态激光散射仪检测胶束的形态大小. 以紫杉醇为模型药物, 采用透析法制备载药CCMC纳米胶束, 并通过高效液相色谱法(HPLC)考察其在纳米胶束中的包载及释放情况. 结果显示, CCMC为两亲性高分子, 在水溶液中能形成粒径为198.4 nm的规则球状胶束, 临界胶束浓度为0.018 mg/mL. 紫杉醇顺利包载于CCMC-纳米胶束内, 载药量高达34.9%; 随着载药量的增加, 胶束粒径呈增大的趋势. 体外释放实验结果显示, CCMC纳米胶束能延缓紫杉醇的释放, 释药速度和释放介质pH值密切相关.     

复合转化生长因子-β1的磺化壳聚糖/聚赖氨酸纳米粒子的制备及其体外诱导干细胞分化性能

采用共沉淀法制备了复合转化生长因子-β1(TGF-β1)的磺化壳聚糖/聚赖氨酸纳米粒子(SCS/PLL/TGF-β1),研究了磺化壳聚糖的浓度对纳米粒子粒径和表面电位的影响.所得纳米微粒的粒径在240~290nm、表面电位在-0.4~-1.3 mV之间可调.采用透射电子显微镜表征了磺化壳聚糖/聚赖氨酸(SCS/PLL)和SCS/PLL/TGF-β1纳米粒子的形貌.通过体外骨髓间充质干细胞(BMSCs)培养实验,分别考察了SCS/PLL/TGF-β1纳米粒子对BMSCs的增殖、氨基葡聚糖(GAGs)分泌和Ⅱ型胶原基因表达的影响.结果显示,相对于等量的SCS/PLL或同浓度的自由TGF-β1,SCS/PLL/TGF-β1纳米粒子可有效保护TGF-β1的活性,促进BMSCs向软骨细胞分化,可望应用于软骨修复材料等领域的研究.     

聚乙二醇接枝聚乳酸的自组装纳米微球的制备及性能

对制备的新型聚乙二醇(PEG)接枝聚乳酸(PLA)在水中的自组装性能进行研究, 探讨其作为纳米药物载体的可行性和稳定性. 目测法得到其溶解度为(2.16～4.32)×10^－2 mg•mL^－1; 荧光法得到聚合物的临界胶束浓度为1.12×10^－3 mg•mL^－1; 透射电子显微镜观察显示该聚合物在水中的自组装聚集体为纳米级球形; 动态激光光散射测试微球的粒径和Zeta电位发现, 在微球的制备过程中, 聚合物的亲/疏水性比例、水相介质及水溶液的pH值对它影响显著; 而制备后, 稀释和冷冻对它无显著影响, 改变微球的环境pH值至酸性, 出现聚集, 至碱性无影响. 研究结果显示, 该聚合物在水和磷酸钠盐缓冲液中可形成稳定的纳米微球, 通过微球的制备条件和存在环境可控制其粒径和Zeta电位, 因此根据应用需要, 通过控制其粒径和Zeta电位, 可能提高微球的在体血液循环时间并实现靶向缓释.     

自组装法制备pH响应性马来酰化壳聚糖纳米粒子的研究

采用碳酸钠为催化剂,室温下制备了水溶性的马来酰化壳聚糖,研究了反应物投料比对酰化取代度以及产物水溶性的影响。红外光谱结果说明马来酸酐成功接枝到壳聚糖分子上;XRD结果说明马来酸酐酰化破坏了壳聚糖分子内和分子间的氢键作用,使水溶性大大提高。用Nano-ZS90Malvern仪器对不同pH值下的粒子粒径和Zeta电位进行测定,发现存在1个等电点:pH=3.01。文章首次采用自组装方法分别在醋酸、甲酸、乳酸溶液中制备得到三种不同的马来酰化壳聚糖纳米粒子并用SEM做了表征;DLS测试表明,当pH值增大后,三种纳米粒子粒径均由几十纳米溶胀到几百纳米,显示具有pH响应性。     

反向胶束法制备聚3,4-乙烯二氧噻吩纳米粒子的光电性能和热稳定性

采用聚合和掺杂同时进行的反向胶束体系制备了粒径分散较小的聚3,4-乙烯二氧噻吩(PEDOT)纳米粒子, 利用紫外-可见光光谱(UV-Vis)、X射线衍射(XRD)和扫描电子显微镜(SEM)等分析方法对纳米粒子进行了表征. 实验结果发现, 氧化剂用量、超声处理、聚合温度及掺杂程度对PEDOT纳米粒子的形貌、电性能及热稳定性有不同程度的影响. 根据实验结果对反向胶束法制备PEDOT纳米粒子过程进行优化发现, 在PEDOT纳米粒子聚合过程中, 甲基苯磺酸有效掺杂浓度约为0.17 mol/L时, PEDOT链的取向最规则, 在6.7°, 12.7°, 25°出现衍射峰, 掺杂剂的有效掺杂使得纳米粒子中分子链的取向不同, 并可以获得较高的电导率(>100 S/cm)的PEDOT纳米粒子, 当粒子的尺寸小于20 nm后电导率降低; 热失重法(TG)分析结果表明, PEDOT纳米粒子的热稳定性比普通块材好, 掺杂剂浓度对纳米粒子的热稳定性有一定影响.     

Synthesis and characterization of novel amphiphilic copolymer stearic acid-coupled F127 nanoparticles for nano-technology based drug delivery system

Pluronic, F127, amphiphilic block copolymers, are used for several applications, including drug delivery systems. The critical micelle concentration (CMC) of F127 is about 0.26-0.8 wt% so that the utility of F127 in nano-technology based drug delivery system is limited since the nano-sized micelles could dissociate upon dilution. Herein, stearic acid (SA) was simply coupled to F127 between the carboxyl group of SA and the hydroxyl group of F127, which formed a novel copolymer named as SA-coupled F127, with significantly lower CMC. Above the CMC 6.9 × 10(-5)wt%, SA-coupled F127 self-assembled stable nanoparticles with Zeta potential -36 mV. Doxorubicin (DOX)-loaded nanoparticles were made, with drug loading (DL) 5.7 wt% and Zeta potential -36 to -39 mV, and the nanoparticles exhibited distinct shape with the size distribution from 20 to 50 nm. DOX-loaded nanoparticles were relatively stable and exhibited DOX dependant cytotoxicity toward MCF-7 cells in vitro. These results suggest that SA-coupled F127 potentially could be applied as a nano-technology based drug delivery method.     

CMC辅助纳米ZnO粒子的制备及表征

以离子型纤维素醚羧甲基纤维素(CMC)的水溶液为反应介质,制备[Zn4CO3(OH)6]CMC水凝胶,洗涤、干燥后经不同温度煅烧前驱物得到ZnO纳米粒子。通过XRD、SEM、TEM、TG-DSC及FT-IR等测试技术对产物的组成、粒径及形态进行表征,研究了CMC对前驱物及ZnO形态和尺寸的影响。结果表明,由于CMC加入对煅烧前驱物产生的空间位阻作用,所制得纳米ZnO粒子粒度分布均匀、分散性好、不易团聚、粒子的平均粒径<20 nm。利用UV-V is测试了纳米ZnO的光吸收性能,所得的纳米ZnO在200~400 nm具有较强的吸收性。     

A novel one step synthesis of silver nanoparticles using room temperature ionic liquid and their biocidal activity

This article reports the synthesis of silver Nan particles (SNPs) using 1-(dodecyl) 2 amino-pyridinium bromide ionic liquid. This is a new one phase method for the synthesis of uniform monodispersed crystalline silver nanoparticles in a water-ionic liquid system. In this work, the functionalized room temperature IL acts as stabilizing agent and solvent. Hydrazine hydrate acts as reducing agent. To the best of our knowledge, there is no report of the synthesis of metal nanoparticles using this ionic liquid. The synthesis of silver nanoparticles is very primarily studied by UV-Visible spectroscopic analysis. The TEM and particle size distribution was used to study morphology and size of the particles. The charge on synthesized SNPs was determined by Zeta potential. The silver nanoparticles have been known to have inhibitory and bactericidal effect. The investigation of antibacterial activities of ionic liquid stabilized silver nanoparticles was performed by measurement of the minimum inhibitory concentration.     

纳米SiO_2/聚丙烯酸酯复合乳液的制备与表征

根据核壳乳液聚合理论,以经过硅烷偶联剂表面改性的纳米SiO2为种子,采用适当的乳液聚合工艺,制备了纳米SiO2/聚丙烯酸酯复合乳液,并表征了其性能.结果表明,纳米SiO2经过改性后,硅烷偶联剂接枝在其表面;以其为种子制备的复合乳液具有核壳结构,其热稳定性有所提高.     

One-Step Fabrication of Thermally Stable TiO(2)/SiO(2) Nanocomposite Microspheres by Evaporation-Induced Self-Assembly

The evaporation-induced self-assembly of mixed colloids has been employed to synthesize microspheres of TiO(2)/SiO(2) nanocomposites. Small-angle neutron/X-ray scattering and scanning electron microscopy experiments reveal the hierarchical morphology of the microspheres. Although the internal structure of the microspheres, consisting of solely silica nanoparticles, gets significantly modified with time because of the reduction in the high specific surface area by internal coalescence, the same for the composite microspheres remains stable over an aging time of 1 year. Such temporal stability of the composite microspheres is attributed to the inhibition of coalescence of the silica nanoparticles in the presence of titania nanoparticles. X-ray diffraction and thermogravimetric results show the improved thermal stability of the composite grains against the anatase-to-rutile phase transition. Such thermal stability is attributed to the suppression of the growth of titania nanoparticles in the presence of silica nanoparticles. The UV-vis results indicate the confinement effect of the TiO(2) nanoparticles in the silica matrix. A plausible mechanism has been elucidated for the formation of microspheres with different morphology during self-assembly.     

基于NaYF_4∶Yb~(3+),Er~(3+)上转换发光纳米晶的复合微球组装及其光动力活性

采用微乳液法,以NaYF4∶Yb3+,Er3+纳米晶为发光基元,肽菁锌(Zn Pc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF4-Zn Pc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF4可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化Zn Pc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

基于NaYF4:Yb3+,Er3+上转换发光纳米晶的复合微球组装及其光动力活性研究

采用微乳液法,以NaYF₄:Yb³⁺,Er³⁺纳米晶为发光基元,肽菁锌(ZnPc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF₄-ZnPc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF₄可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化ZnPc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

Influence of DS of CMC on morphology and performance of magnetic microcapsules

In this paper, we present a reproducible method for the preparation of mixed colloidal nanoparticles, consisting of a magnetic Fe₃O₄ nanoparticle nucleus and a biocompatible self-assembly shell of substitution of sodium carboxy methyl cellulose and chitosan in different degree. The heterogeneous structure of the particles can confer them both the possibility of being used as drug delivery systems and the responsiveness to external magnetic fields, allowing a selective guidance of drug molecules to specific target tissues without a concurrent increase in its level in healthy tissues. The preparation method is based on a coordination and layers by layers self-assembly process. In order to specify that A complete physicochemical characterization of the composite particles is carried out, in order to use this preliminary investigation to show that the CMC/CS shell efficiently coating Fe₃O₄ nanoparticles, and leading to composite particles, the magnetic behavior of the core/shell particles is similar to that of bare magnetic Fe₃O₄ nanoparticles. It is observed that The magnetic microspheres with CMC DS 1.05 served as shell show the best dispersion, super paramagnetic, the range of magnetic field the particles can respond is an order of magnitude higher than others, and the specific saturation magnetization intensity is the highest. Thus we can indicate with the conclusion that if the DS of CMC becomes higher, the Fe₃O₄@CS/CMC would be more sensitive with the extant magnetic field. However, when the DS of CMC is higher than 1.1, the specific saturation magnetization intensity of magnetic microspheres would fall down again and the geometry becomes not well. Therefore, when the DS of CMC stay in 1.05, it would be a better material of magnetic microsphere.     

SYNTHESIS AND pH-SENSITIVE SELF-ASSEMBLY OF DENDRITIC POLY(AMIDOAMINE)-b-POLY(L-GLUTAMATE)BIOHYBRIDS

 Dendritic poly(amidoamine)-b-poly(L-glutamate) (PAMAM-b-PLG) biohybrids were synthesized by the ring-opening polymerization of γ-benzyl-L-glutamate N-carboxyanhydride monomer, followed by the deprotection of benzyl groups on poly(benzyl-L-glutamate), and were characterized by ¹H-NMR, FT-IR and gel permeation chromatography. The self-assembly behavior of the PAMAM-b-PLG biohybrid was investigated by means of UV-Vis, dynamic light scattering (DLS), transmission electronic microscopy (TEM) and ¹H-NMR. UV-Vis analysis demonstrated that the critical aggregation concentration of PAMAM-b-PLG was dependent on the pH value of aqueous solutios. DLS results further evidenced that the PAMAM-b-PLG biohybrid exhibited a pH-sensitive self-assembly behavior, and the average size of the self-assembled nanoparticles decreased gradually with the increasing pH value of the PAMAM-b-PLG solution. The self-assembled nanoparticles gave a nearly spherical morphology, and the pH-induced self-assembly had no obvious effect on the morphology of nanoparticles.     

Self-assembling Behavior of Amphiphilic Copolymer Containing Cross-linked Hydrophilic Block in Ethanol

IntroductionIt is well known that amphiphilic block copolymerscan self-assemble in block-selective solvent to formcore-shell micelle or colloidal size aggregates[1—5].Usually the micelle are preparedviatraditional dialysismethod[6—8]. Besides micellizat…