基于“透过表面接枝”方式制备低分散性和高接枝密度聚合物刷的研究

"透过表面接枝"(grafting-through)是一种聚合物表面改性的新方法,可以显著改善传统grafting-from和grafting-to方法接枝工艺的缺陷,获得兼具高接枝密度和低分散性的聚合物刷产物.本文采用布朗动力学模拟方法,模拟研究了grafting-through方法接枝聚合物刷过程中的主控因素,从微观动力学角度阐明其特有的链增长趋同化效应是保持产物聚合物刷较低分散性的主因.引发效率在grafting-through中可显著提高,且产物聚合物刷的分子量呈现泊松分布.此外,反应中保持高的单体通量,可以同时实现产物聚合物较长的平均链长和较低的分散性,有利于制备性能优异的改性材料.该研究对深入理解grafting-through接枝过程的动力学主控因素,促进grafting-through技术的推广和工艺的改进具有一定的理论指导意义.     

HDPE氯化原位接枝MAH及产物结构

HDPE氯化原位接枝MAH及产物结构;高密度聚乙烯;氯化原位接枝;CPE-g-MAH;接枝率;凝胶     

氯化原位接枝反应制备羟基官能化CPE——结构表征

以高密度聚乙烯(HDPE)为基体,采用气-固氯化原位接枝反应合成了以氯化聚乙烯(CPE)为骨架聚合物、丙烯酸-2羟基乙酯(HEA)为支链的接枝共聚物.反应中不需要加入任何引发剂,以氯自由基引发接枝及氯代反应,得到羟基官能化CPE接枝聚合物.并用1H-NMR,FT-IR,GPC及X-射线衍射等对接枝共聚物的结构进行了表征.     

磷脂改性聚合物膜

综述了膦脂改性聚合物膜的制备方法，其中饭知光引发接枝、电晕放电、化学接枝、原位聚合、共混改性、物理吸附等方法，并对磷脂改性聚合物膜的部分性质和应用前景作了简单介绍。     

不饱和非极性合成橡胶接枝共聚改性研究进展

不饱和非极性合成橡胶本身具有优良的电绝缘性、高弹性、粘弹性,应用非常广泛.但其与基体的相容性差,耐油、有机溶剂性差,不耐热.含硅/不饱和非极性橡胶共聚物不仅兼备了含硅聚合物的诸多优良性能,而且能有效地提高与基体的相容性并提高橡胶的应用范围.本文以接枝共聚方法为主线,对接枝共聚机理进行了初步讨论,按接枝共聚引发方式对橡胶接枝改性进行了分类,同时介绍了接枝共聚产物的性能及应用,并对非极性不饱和橡胶接枝改性前景作简要展望.     

聚苯乙烯的机械性能与耐热性改性研究进展

系统地评述了不同方法改性聚苯乙烯(PS)的机械性能与耐热性,包括(未官能化、官能化)无机填料直接填充或在聚合过程中原位填充改性;(未改性、改性)聚合物直接共混或在聚合过程中原位共混改性;离子交联、互穿聚合物交联网络、共价交联改性;从单体出发采用无规、接枝或嵌段共聚改性;以及同时使用两种方法的耦合改性(如共混-填充、共聚-共混、共聚-填充、离子交联-共混、离子交联-填充)等。在此基础上,对各种改性方法的优缺点进行了比较与讨论。     

羟丙基甲基纤维素接枝聚己内酯二醇的合成、表征及性能

采用羟丙基甲基纤维素(HPMC)和聚己内酯二醇(PCL)为原料,以4,4'-二苯基甲烷二异氰酸酯(MDI)为接枝桥梁,利用酰胺化反应将PCL接枝到HPMC分子上,成功合成了改性接棱聚合物羟丙基甲基纤维素接枝聚己内酯(HPMC-g-PCL).利用红外光谱(IR)表征了产物结构,探讨了MDI在整个过程的桥联作用,利用热重分析(TGA)和示差扫描量热分析(DSC)对合成产物的热性能进行了表征,结果表明HPMC经PCL接枝改性后,失重率降低,热稳定性得到增强.     

氯化聚丙烯的熔融接枝改性及其粘接性能

氯化聚丙烯的熔融接枝改性及其粘接性能;氯化聚丙烯 甲基丙烯酸缩水甘油酯 熔融接枝 粘接     

溶液法马来酸酐接枝氯化聚丙烯的研究

采用溶液法用马来酸酐对氯化聚丙烯接枝改性。考察了反应温度、引发剂浓度、单体浓度、溶剂用量等因素对接枝率的影响，测定了反应前后氯含量的变化。采用FT-IR和DSC对产物进行了表征。     

PP固相接枝改性研究进展

聚丙烯(PP)是一种具有优异性能且价格低廉的通用高分子材料,但由于聚丙烯为非极性聚合物,其染色性、亲水性、粘结性等均较差,且与其它材料的相容性也很差,这些缺点限制了聚丙烯的应用。通过固相接枝法改性聚丙烯,不仅可以在保持聚丙烯原有优异性能的情况下引入极性官能团,而且具有低温、低压、低成本、较高的接枝率和无需溶剂回收等优点。本文简要介绍了PP固相接枝反应机理,从接枝单体角度综述了近几年PP固相接枝改性的研究进展,并讨论了反应工艺对接枝产物的接枝率、接枝效率和性能的影响。     

氯化原位接枝制备CPE-g-MMA接枝共聚物

氯化原位接枝制备CPE-g-MMA接枝共聚物;接枝共聚物结构;氯化原位接枝;力学性能     

双单体固相共聚改性聚丙烯技术及其机理研究

在马来酸酐(MAH)固相接枝改性聚丙烯(PP)的过程中加入合适比例的异氰脲酸三烯丙酯(TAIC)作为共聚单体,可以大大提高MAH在PP上的接枝率,同时可以有效抑制在普通固相接枝过程中PP的严重降解,得到了性能较好的高极性PP.与普通固相接枝法与熔体接枝法对比,双单体固相共聚接枝改性PP是一种得到高极性PP的有效方法.本文同时对双单体在固相接枝反应中的作用机理进行了探讨.     

A novel approach to synthesis of functional CPVC and CPE or graft copolymers—in situ chlorinating graft

A new process of graft copolymerization of poly(vinyl chloride) (PVC) and polyethylene (PE) with other monomers was developed. The grafted chlorinated poly(vinyl chloride) (CPVC) and chlorinated polyethylene (CPE) were synthesized by in situ chlorinating graft copolymerization (ISCGC) and were characterized. Convincing evidence for grafting and the structure of graft copolymers was obtained using FT‐IR, ¹H‐NMR, gel permeation chromatography (GPC), and the vulcanized curves. Their mechanical properties were also measured. The results show that the products have different molecular structure from those prepared by other conventional graft processes. Their graft chains are short, being highly branched and chlorinated. The graft copolymers have no crosslinking structure. The unique molecular structure will make the materials equipped with special properties. Copyright © 2007 John Wiley & Sons, Ltd.     

The Preparation and Properties of Acrylic and Methacrylic Acid Grafted Cellulose Prepared by Ceric Ion Initiation. Part I. Preparation of the Grafted Cellulose

The ceric ion method has been used to graft acrylic acid directly onto cellulose with a minimum amount of homopolymer. The method utilizes the pretreatment of the cellulose with ceric ammonium nitrate followed by washing out any excess of the catalyst. Oxygen can be present with the pretreatment step, but must be excluded during the grafting reaction itself. The process, which is entirely aqueous in nature, would appear to be quite practical on a large scale. Wet strengthened papers which are essential for the use of the grafted products as ion-exchange media can also be grafted but with adequate but lower yields than with the untreated paper. Apart from ion exchange, the products are of considerable potential value as water sorbing agents. Methacrylic acid gave lower grafting yields than acrylic acid, but these were much improved at higher temperatures.     

蚕丝辐射接枝丙烯腈

以氯化锌水溶液为溶剂 ,用钴 60γ射线引发蚕丝均相溶液接枝丙烯腈 .研究了辐射吸收剂量、剂量率、铜离子浓度、蚕丝浓度和单体浓度及“后效应”对单体转化率、接枝率、接枝效率、接枝链分子量的影响 ;研究发现初始接枝效率主要取决于 [S]丝/ ( [S]丝 +[M]单) ,接枝效率随吸收剂量增加而增加 ;铜离子的存在使接枝链分子量下降 ,而对接枝率和接枝效率影响不大 ;用IR、TGA、DTA等多种方法对接枝物进行了表征 ,表明蚕丝接枝上聚丙烯腈后 ,其热学性能有较大提高 .     

Graft copolymerization of methacrylic acid onto carboxymethyl chitosan

Carboxymethyl chitosan (CMCTS) was prepared and characterized by FTIR, ¹H NMR, and elemental analysis. The graft copolymerization of methacrylic acid (MAA) onto CMCTS using ammonium persulfate (APS) as an initiator was carried out in an aqueous solution. Evidence of grafting was obtained by comparison of FTIR spectra of CMCTS and the grafted copolymer as well as solubility characteristics of the products. The effects of APS, MAA, reaction temperature and time on graft copolymerization were studied by determining the grafting parameters such as grafting percentage and grafting efficiency. With keeping other conditions constant, the optimum conditions were shown as following: [APS]=8 mmol/l, [MAA]=2.4 mol/l, reaction temperature=60-70 °C, reaction time=120 min.     

丙烯酸-2-乙基己酯改性玉米淀粉

接枝共聚合;丙烯酸-2-乙基己酯改性玉米淀粉     

对环芳烷二氯化产物组成的GC—MS表征

对环芳烷([2,2]Paracyclophane,简称PCP）是指苯环对位桥联的化合物,PCP及其氯代PCP的重要用途是通过升华、裂解、聚合等步骤沉积于物体表面形成聚合膜,该聚合膜具有透湿和透气小、抗化学腐蚀和抗辐射等优良性能[1,2].     

Radiation-induced grafting of diallyldimethylammonium chloride onto acrylic acid grafted polyethylene

Diallyldimethylammonium chloride (DADMAC) was grafted onto polyethylene (PE) films by a double grafting procedure. The PE film was initially modified by grafting acrylic acid (AA), through a mutual irradiation method. AA-g-PE film, thus obtained was subjected to subsequent radiation grafting reaction of DADMAC, to give a DADMAC-g-AA-g-PE film having a comb-type structure. The influence of different conditions, such as the extent of AA grafting, DADMAC concentration, absorbed dose and dose rate, on the grafting yield of DADMAC was investigated. A maximum DADMAC grafting of 30% was achieved. The equilibrium degree of swelling (EDS) of the grafted films were gravimetrically determined. TGA and FT-IR techniques were employed to characterize the grafted PE films.