肽类药物口服剂型材料及控制释放性能研究Ⅰ.壳聚糖─海藻酸盐微囊对胰岛素的控释作用

应用壳聚糖-海藻酸盐微囊技术制备了一系列胰岛素微囊，并研究了不同反应条件如海藻酸钠浓度、壳聚糖浓度、壳聚糖分子量及壳聚糖溶液pH值对微囊的胰岛素包封率及其释放性能的影响。结果表明，海藻酸钠浓度越高，微囊对胰岛素的包封率越高，在模拟小肠液中释放速率越低；壳聚糖浓度越大，微囊的胰岛素包封率及其在模拟胃液中释放率越高，在模拟肠液中释放达最大值所需时间越长；而随壳聚糖分子量减小，微囊在胃液中释放率增高；壳聚糖溶液pH值的变化对微囊的胰岛素包封率未造成明显影响。     

肽类药物口服剂型材料及控制释放性能研究：Ⅰ.壳聚糖—海藻酸盐？…

应用壳聚糖－海藻酸盐微囊技术制备了一系列胰岛素微型,并研究了不同反应条件如海藻酸钠浓度,壳聚糖浓度,壳聚糖分子量及壳聚糖溶液ｐＨ值对生囊的胰岛素包封率及其释放性能的影响。结果表明,海藻酸钠浓度越高,微囊对胰岛素的包封率越高,在模拟小肠液中释放速度越低;壳聚糖浓度越大,微囊的胰岛素包封率及其在模拟胃液中释放率越高,在模拟肠液中释放达最大值所需时间越长;而随壳聚糖分子量减小,微囊在胃液中释放率增高;壳     

肽类药物口服剂型材料及控制释放性能研究──Ⅱ.含有添加剂的壳聚糖-海藻酸盐微囊对胰岛素的控释作用

应用壳聚糖－海藻酸盐微囊技术制备了一系列含有添加剂的胰岛素微囊,并研究了在添力。剂存在下,不同反应条件对微囊的胰岛素包封率及其释放性能的影响．结果表明,在添加剂存在下,海藻酸钠浓度越高,微囊在胃液中释放率越大,在模拟小肠液中释放速率越低,并且微球的韧性很强,不易破裂;海藻酸钠与添加剂的质量比越大,微囊的包封率越大,胃液中释放率减小;胰岛素含量越高,包封率越小,胃液中释放率越大;明胶和牛血清白蛋白的加入使微囊在胃液中释放率显著增大,微球的强度和韧性大大增强,尤其明胶的加入使微囊在模拟小肠液中释放率显著降低,释放达到最大值的时间延长．     

肽类药物口服剂型材料及控制释放性能研究：Ⅱ含有添加剂的？…

应用壳聚糖－海藻酸盐微囊技术制备了一系列含有添加剂的胰岛素微囊,并研究了在添加剂在下,不同反应条件对微囊的胰岛素包封率及其释放性能的影响。结果表明,在添加剂存在下,海藻酸钠浓度越高,微囊在胃液中释放率越大,在模拟小肠液中释放速率越低,并且微球的韧性很强,不易破裂;海藻酸钠与添加剂的质量比越大,微囊的包封率越大,胃液中释放率减小;胰岛素含量直蒿,包封率越小,胃液中释放率越大;明胶和牛血清白蛋白的加入     

超声复凝聚法制备海藻酸钠-明胶-维生素B1纳米胶囊

采用超声复凝聚法制备了海藻酸钠-明胶-维生素B₁纳米胶囊。采用控制单因素变量法探讨了明胶浓度、海藻酸钠浓度、维生素B₁浓度、pH、固化时间、温度等因素对胶囊包封率的影响,并通过正交试验确定了制备纳米胶囊的最佳工艺条件为明胶浓度0.8%、海藻酸钠浓度0.8%、维生素B₁浓度2.5%、pH为4.2、固化时间15min、温度55℃。制备的纳米胶囊包封率为42.68%,载药量为31.27%。     

克拉霉素漂浮-生物粘附微囊的制备及性能研究

选用乳化-溶剂挥发法制备乙基纤维素载药微球(EMs), 并通过内部凝胶化法进行包衣制得海藻酸钠-乙基纤维素载药微囊(AEMs), 最后通过离子交联法进一步包衣制得壳聚糖-海藻酸钠-乙基纤维素载药微囊(CAEMs). 研究克拉霉素漂浮\|生物粘附微囊的制备工艺, 并考察微囊的体外漂浮性能、 粘附性能及体内滞留性能. 结果表明, CAEMs球形度较好, 药物包封率为72.3%~78.2%, 载药量为7.1%~12.7%. 在pH=5的醋酸缓冲液中, 6 h时的累积释放率为56.6%~70.6%, 漂浮率大于70%, 4 h时的体内滞留率为60.5%. CAEMs有望通过延长药物胃内滞留时间, 在临床用于根除幽门螺旋杆菌, 从而降低消化道溃疡的复发率.     

双重载药多层海藻酸盐-壳聚糖缓释微球的制备及体外释放

采用滴注法将海藻酸钠与钙离子交联,制成负载血管内皮生长因子(VEGF)的藻酸钙核心球,利用层层自组装技术在核心球的表面依次包覆壳聚糖、海藻酸和壳聚糖,壳聚糖中负载万古霉素(VAN),形成多药载药缓控体系.采用正交实验考察海藻酸钠浓度、钙离子浓度及壳聚糖浓度对VEGF和VAN的药物包封率和载药量的影响,优化了制备工艺.采用扫描电子显微镜观察多层微球的表面、截面形貌及粒径,采用傅里叶变换红外光谱检测海藻酸盐与壳聚糖的自组装情况,分别采用酶联免疫吸附(ELISA)双抗体夹心法和紫外分光光度法检测VEGF和VAN的包封率、载药量及体外释放情况.结果表明,海藻酸钠最优浓度为0.04g/mL,氯化钙最优浓度为0.15g/mL,壳聚糖最优浓度为0.01g/mL.微球光滑圆整,均质实心,直径900~1100μm,VEGF的包封率达61.31%,VAN的包封率为3.48%.体外释放实验结果表明,VEGF缓释时间为15.5d,并出现2个释放高峰;VAN缓释时间为4.5d,释药情况平稳持续,无明显突释.双重载药多层包覆微球兼具控制感染和促进血管生成两种潜能,有望应用于组织工程骨的基础研究和临床实践.     

磁性微胶囊的制备及其药物缓控释性能

用乳液-凝胶法制备了磁性壳聚糖/海藻酸钠微胶囊. 在壳聚糖/海藻酸钠微胶囊中掺入Fe3O4磁性中空球, 使微胶囊具有磁靶向性能. 以头孢拉定作为模型药物研究了载药磁性微胶囊的载药量、包封率及药物缓控释性能等. 结果表明, 提高头孢拉定的初始浓度可以提高载药量, 却不利于提高药物的包封率. 所制备的微胶囊在各种缓冲溶液中长时间内具有显著的缓释效果, 并具有pH 刺激响应释放的性能, 即在模拟胃液中的药物释放率大大降低, 而在模拟体液和肠液中的释放时间大大延长, 可达50 h以上. 另外, 在外加磁场作用下, 微胶囊表现出良好的磁定向运动性能, 为磁靶向药物输送提供基础.     

壳聚糖─海藻酸钠微囊对蛋白质控制释放的研究

采用乳化法制备了可注射用壳聚糖海藻酸钠微囊, 其粒径小于２００ μｍ ,且具有相对较窄的近似高斯分布。牛血清白蛋白作为模型药物在微囊中的包埋率可超过５０ ％ 。通过壳聚糖在海藻酸钠微囊表面的复合,牛血清白蛋白从微囊中的持续释放时间从几个小时延长到半个月以上。     

壳聚糖—海藻酸钠微囊对蛋白质控制释放的研究

采用乳化法制备了可注射用壳聚糖－海藻酸钠微囊，其粒径小于２００μｍ，且具有相对较窄的近似高斯分布。牛血清白蛋白作为模型药物在微囊中的包埋率可超过５０％。通过壳聚糖在海藻酸钠微囊表面的复合，牛血清白蛋白从微囊中的持续释放时间从几个小时延长到半个月以上。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.