立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

具有强酸位的六方和立方介孔硅铝分子筛合成及催化活性比较

六方 MCM- 41和立方 MCM- 48介孔分子筛是长程有序的介孔材料 ,由于其孔壁是无定形结构 ,具有较弱的酸性 ,限制了其应用范围 .若能提高它们的酸强度则可提高其在石油炼制和精细化工中的应用价值 .现已采用多种改进方法来提高其酸强度 [1～ 6 ] ,但所合成的介孔材料均为六方结构 ,而具有立方结构的材料未见文献报道 .本文采用两步晶化合成法 ,用低浓度的表面活性剂合成出具有强酸位的立方介孔分子筛 ( MB48) ,还通过调节溶液的酸碱性合成出六方介孔分子筛 ( MB41 ) ,对样品的结构、酸性和催化性能进行了表征和比较 .1　实验部分1 .1　 β…     

立方介孔分子筛Zr-SBA-1的合成及表征

在强酸性条件下以十六烷基三甲基溴化铵为模板剂,TEOS为硅源,沿S X-I 途径合成了Zr含量为0.85~2.42%的介孔分子筛Zr-SBA-1.采用XRD、SEM、BET、DR UV-V is等技术对所合成的Zr-SBA-1的表征结果表明,所合成的Zr-SBA-1分子筛具有典型的立方相介孔结构SBA-1分子筛的特征,锆物种被成功引入分子筛骨架中.     

基于长链离子液体模板合成Fe(Co、Ni)-MCM-48

以两亲长链离子液体(氯化-1-十六烷基-3-甲基咪唑)为模板剂,采用水热合成方法,分别合成了含铁、钴和镍的立方介孔分子筛MCM-48。通过XRD、TEM、ICP-AES、FTIR、UV-Vis和N₂吸附/脱附实验对其结构和形态进行了表征,并考察了钴掺杂量和模板剂用量对合成立方相结构的影响。结果表明,用该方法合成的试样具有较高的比表面积和规则的立方介孔孔道结构等特征;相对于铁和镍的掺杂试样,钴物种能以四面体的结构稳定地存在于立方介孔分子筛骨架中。     

立方介孔相含钕氧化硅的合成与表征

以十六烷基三甲基溴化铵为结构导向剂，通过水热法合成了具有立方结构的含钕Nd-MCM-48介孔分子筛材料。XRD和TEM测试表明当n_Nd/n_Si<0.05时可以获得典型的长程有序介孔立方结构相，随n_Nd/n_Si比的增加，晶胞参数的增大和红外吸收光谱(FT-IR)的变化为Nd进入介孔分子筛骨架中提供了有力证据。N₂吸附-脱附实验给出了其BET表面积为1 195 m²·g^-1，BJH平均孔径为3.6 nm。紫外-可见漫反射光谱(UV-Vis)证明钕氧形成一种八面体结构。X射线光电子能谱(XPS)进一步证明钕主要以三价形式存在于立方介孔分子筛骨架中。     

三头季铵盐表面活性剂导向合成新型立方相介孔二氧化硅

介孔分子筛因具有大而均一的孔道、高比表面积及相对良好的热稳定性而在精细化学品催化剂[1,2 ] 、生物大分子分离 [3] 和功能材料的主体 [4 ] 等领域有十分广阔的应用前景 .自 1 992年 Mobil公司合成 M41 S[5,6 ] 系列介孔材料以来 ,HMS[7] ,MSU[8] 和 SBA[9～ 12 ] 系列以及 FDU- 1 [13] 等不同结构的介孔分子筛材料相继被合成 .立方相介孔分子筛因具有三维网状结构和可通性较高的孔道而在反应中不易堵塞 ,相对于一维孔道结构的六角相 MCM- 41和 SBA- 1 5 ,其应用前途更加广阔 .迄今 ,人们已经合成了 MCM- 48[14～ 16 ]( Ia3d) …     

Ti-Si介孔分子筛的转晶与控制

以季铵盐型阳离子Gemini表面活性剂[C16H33(CH3)2N+(CH2)6N+(CH3)2C16H33]•2Br−(GEM16-6-16)为模板剂, 改变n(Ti)/n(Si)比值, 合成了系列Ti-Si介孔分子筛. X射线衍射(XRD)和透射电子显微镜(TEM)等表征结果表明, 在n(Ti)/n(Si)≤0.20时, 分子筛为高度有序六方介孔; 当 n(Ti)/n(Si)为 0.30时, 介孔转晶为立方相; 当n(Ti)/n(Si)为0.50时, 介孔转晶为层状相; n(Ti)/n(Si)为1.0时, 材料失去有序孔道结构. FT-IR分析表明, 在分子筛骨架间形成了Ti—O—Si键, 而且Ti—O—Si键的数目随n(Ti)/n(Si)的增加而增加, 达到一定饱和值后基本保持不变. 乙醇和丁醇对纯硅基介孔分子筛孔结构转晶控制作用呈现六方相→立方相→层状相递变规律, 因而钛酸正丁酯水解生成的丁醇对Ti-Si介孔分子筛转晶具有一定的控制作用.     

介孔ZnO/SiO2复合材料的合成与性能表征

通过原位合成的方法,以[Zn(OH)x]-(x-2)(x＞2)为锌源、正硅酸乙酯(TEOS)为硅源,合成了孔壁为ZnO/SiO2复合结构的MCM-48型有序介孔分子筛,并通过XRD、XPS、N2吸附-脱附等温线等手段对样品进行了表征,结果表明,锌以正二价离子的形式均匀的分布在MCM-48分子筛的孔壁结构中.另外,适量掺锌所合成的Zn-MCM-48介孔材料仍然保持立方介孔的有序结构,具有较高的比表面积、较高的孔容和较宽的孔径分布.     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

杂化介孔分子筛HMS的合成与表征

以十六胺(HDA)为模板剂,通过正硅酸乙酯和硅烷偶联剂一步法合成了杂化介孔分子筛HMS,并通过XRD、N2吸脱附、FT-IR、TG、SEM等手段对其进行结构表征.结果表明合成的材料具有良好有序的介孔结构、大的孔径(≈2.04.0 nm)和比表面积(>600 m2g-1),接近球形颗粒,尺寸在0.51μm之间.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.