脉冲电沉积法制备Pt-TiO2 纳米管电极及其电催化性能

采用阳极氧化法在高纯钛片上原位组装TiO2纳米管阵列, 然后用脉冲电沉积方法将Pt沉积到TiO2纳米管阵列上, 制备出Pt-TiO2纳米管电极. 利用XRD和SEM对所获电极的微观结构和形貌进行表征, 结果表明, Pt纳米颗粒以花簇状分散在TiO2纳米管上, 晶粒大小约为25.6 nm. 对甲醇的电催化性能的研究结果表明, 脉冲电沉积制得的Pt-TiO2纳米管电极比TiO2纳米管电极和纯Pt片电极具有更高的电催化活性, 是Pt电极的40多倍.     

Fe-Ni/TiO2纳米管阵列电极的制备、表征及光电催化还原五氯酚活性

采用阳极氧化法和浸渍电沉积联用法制备了不同负载量的Fe-Ni/TiO2纳米管阵列电极. 通过扫描电子显微镜(SEM)、 X射线光电子能谱(XPS)和电化学测量等手段对样品的微观形貌、 晶体结构和光电响应等特性进行分析. 考察了在0.6 V偏压下, 所制备的电极对五氯酚的光电催化还原性能. 结果表明, 适量的Fe和Ni纳米颗粒的负载, 降低了TiO2纳米管阵列光生电子-空穴对的复合几率; 浸渍电沉积5次的Fe-Ni/TiO2纳米管阵列电极光电催化还原降解五氯酚的效率为91.35%, 明显高于TiO2纳米管阵列电极.     

基于等离激元热电子调控的全谱光催化产氢增强（英文）

等离激元效应在光催化体系中的集成为实现广谱光吸收提供了一个新的途径,然而等离激元热电子的较低迁移率和不确定扩散方向使得其光催化效率仍较低.等离激元金属与n型半导体接触后,其界面间会形成肖特基结.在特定波长太阳光照射下,等离激元金属将其表面等离子体能量聚集在表面自由电子上,进而产生热电子.当这些热电子具有的能量高于肖特基势垒时,热电子便可注入到半导体导带上.与此同时,半导体上的电子可以通过肖特基接触发生回流,与金属上的空穴复合,进而降低半导体-等离激元金属复合材料的光催化性能.因此,为了提高光催化效率,如何调控等离激元热电子迁移和充分利用等离激元效应是一个重要挑战.本文尝试将"表面异质结"与肖特基结相结合的复合结构,得以有效地调控等离激元热电子的迁移.在该复合结构中,金纳米颗粒和铂纳米颗粒分别作为等离激元吸光单元和助催化剂,集成在TiO_2纳米片表面.其中"表面异质结"是由TiO_2纳米片的两种不同表面晶面所构成,我们选择由{001}和{101}两组晶面组成的TiO_2纳米片作为半导体衬底.该结构中的{001}晶面导带能级高于{101}导带能级,因而电子由高能级的{001}流向低能级的{101}晶面,可以用来引导等离激元热电子从可见光响应的金纳米颗粒向TiO_2进行高效转移.通过巯基丙酸的桥联作用,将等离激元Au纳米颗粒锚定在TiO_2纳米片的{001}晶面上,获得Au-TiO_2{001}样品.另一方面,利用TiO_2纳米片自身光生电荷导向性光沉积,得到与{101}晶面结合形成的Au-TiO_2{101}样品.我们对两组样品进行光电流和光催化产氢实验对比,确认在"表面异质结"诱导下Au-TiO_2{001}样品中Au产生的光生热电子可以更好地注入到TiO_2纳米片导带上.我们进一步通过光沉积Pt纳米颗粒来判定光生电子所能到达的区域,验证了以上结论.与此同时,肖特基结由铂纳米颗粒与TiO_2纳米片所形成,可以促使电子由TiO_2向铂纳米颗粒进行转移,而避免发生向金纳米颗粒的反向迁移,从而在Au-TiO_2体系中实现高效的单向载流子转移.基于该设计,等离激元光催化剂实现了明显改善的全谱光催化产氢性能.本文为全谱光催化的复合结构理性设计提供了一个新的思路.     

电泳法制备具有{001}面TiO2纳米片分级球散射层的染敏太阳电池光电极

利用简便的溶剂热法,制得了由锐钛矿相的纳米片组成的、{001}面接近100%暴露的TiO2分级球形结构。利用电泳沉积法,将所得的TiO2分级球形结构作为散射层引入到染料敏化太阳电池(DSSC)中,并很好地保护了这种脆弱的分级结构。由于这种分级球形结构比TiO2纳米颗粒具有更好的染料吸附性能和光散射性能,使用这种TiO2分级球形结构作为散射层的DSSC达到了7.38%的光电转换效率,较之基于TiO2纳米颗粒的DSSC有了26%的提高。     

氢氟酸加入量对钛基半导体结构演变及光催化性能的影响

以钛酸丁酯为钛源,氢氟酸为氟源,采用溶剂热法制备了一系列钛基半导体纳米晶,考察了氢氟酸加入量对纳米晶结构演变的影响,并通过光催化产氢、光降解罗丹明B及瞬态光电流响应测试了所得纳米晶的光催化性能。当不加氢氟酸时,所得纳米晶为TiO_2纳米颗粒,主要暴露{101}面。加入少量氢氟酸时,所得纳米晶为主要暴露{001}面的TiO_2纳米片,这是由于氟离子吸附于纳米晶表面,降低{001}面表面能所致。由于{001}面与{101}面间的晶面异质结促进了载流子分离,该样品表现出了最高的光催化性能。继续增加氢氟酸加入量,氟离子开始进入晶格构成新晶相,所得纳米晶的表面与体相均形成TiO_2与TiOF_2混合相,形貌呈现片层堆叠结构,光催化性能下降。当进一步增加氢氟酸加入量后,氟离子全部进入晶格形成大颗粒(NH_4)_(0.3)TiO_(1.1)F_(2.1)。因其具有不适宜光催化反应的能带结构,该物质表现出了较差的光催化活性,但其可作为制备氮、氟掺杂钛基半导体材料的前驱体使用。     

具有{110}面的锐钛矿TiO_2单晶的可控合成与光催化性能

采用水热法合成了同时具有最高表面能{110}和{001}晶面的锐钛矿TiO2单晶,通过X射线衍射、扫描电镜和激光拉曼光谱等手段对样品的形貌和结构进行了表征,并系统考察了过氧化氢、氢氟酸和反应温度等关键因素对所得样品中{110}面比例的影响,实现了持续提高{110}面比例的过程.在光催化降解亚甲基蓝反应中,具有{110}面的锐钛矿TiO2单晶的光催化活性显著高于无{110}面的单晶.     

Cu2O/TiO2纳米管阵列异质结的制备及其可见光光电响应性质

采用阳极氧化法制备出结构规整的TiO2纳米管阵列,然后利用电化学沉积法制备出不同电沉积时间下Cu2O/TiO2纳米管阵列异质结.通过SEM和UV-vis对样品进行表征,并对样品的可见光光电转换、光解水等性质进行了测试.结果表明,Cu2O/TiO2纳米管阵列异质结体系在可见光区域有很强的吸收,TiO2与Cu2O之间形成的p-n结具有单向二级管的性质,能有效降低光生电子-空穴对的重组,提高光致电荷分离及电子-空穴对的迁移率.当电沉积时间为30 min时,Cu2O/TiO2纳米管阵列异质结(Cu2O/TiO2NTs-30)表现出最优的可见光光电响应性质.虽然与TiO2纳米管相比,Cu2O/TiO2NTs-30的开路电压减少了0.046 V,但短路电流却提高了4.5倍,最大吸收波长处光电转换效率提高了近6倍.     

氧化锌纳米线外延生长PdZn纳米粒子的制备及在甲醇水蒸气重整反应中的催化性能

以采用改进的气相沉积法制备的具有规整{1010}晶面的氧化锌纳米线为载体,合成了氧化锌纳米线负载钯催化剂,考察了还原温度和负载量对催化剂表面形成Pd Zn合金过程的影响,并通过适当的后处理过程制备了氧化锌纳米线外延生长Pd Zn纳米粒子催化体系.结果表明,当金属钯负载量较低(质量分数约为2%)时,经400℃还原后的催化剂表面会形成PdxZny(xy)合金,从而影响催化剂的CO选择性;提高钯负载量或还原温度有利于将PdxZny(xy)合金转化为Pd Zn合金,降低CO选择性.负载Pd Zn合金纳米粒子与氧化锌纳米线载体之间外延生长的界面关系使其在甲醇水蒸气重整反应中显示出优异的反应稳定性.     

电沉积-置换法制备Pt/Ti对电极及其对染料敏化太阳能电池性能的提升

采用电沉积-置换法在Ti片上制备了染料敏化太阳能电池(DSSC)的对电极Pt/Ti. 形貌表征结果显示, 与传统热解法制备的Pt/FTO对电极相比, Pt/Ti对电极Ti基底上Pt催化颗粒的粒径和分散性得到显著改善. 光电流-光电压特性曲线测试结果表明, 以Pt/Ti为对电极的DSSC与以Pt/FTO为对电极的DSSC相比, 光电转化效率提高了20.8%. 由于Pt颗粒分散性和粒径的改善所引起的Pt催化性能的提高、 Pt/Ti对电极更低的电阻以及Ti基底更好的反光性能是提升DSSC性能的原因.     

TiO_2一维纳米材料及其纳米结构的合成

本文对合成TiO2一维纳米材料及其有序纳米阵列的阳极氧化法、模板法以及水热法进行了全面而系统的评述,着重介绍了它们的最新研究进展。阳极氧化法能制备牢固负载于基体上的TiO2纳米管阵列,这有助于构筑TiO2纳米结构及其在纳米器件上的应用;与多种制备技术如溶胶-凝胶工艺、电化学沉积以及原子层沉积等相结合,模板法可以合成出多种形貌的TiO2纳米材料如纳米管、纳米线和纳米棒,并且可以通过改变所用模板的微观尺寸来调控TiO2一维纳米材料及其有序阵列的微结构参数;水热合成法可以制备出直径小且比表面积大的TiO2纳米管粉末。从目前来看,该法还不能制备出牢固负载于基体上的有序纳米阵列。文章最后指出了TiO2一维纳米材料及其有序纳米阵列合成中存在的问题及今后发展方向。     

Facile fabrication of anatase TiO2 microspheres on solid substrates and surface crystal facet transformation from {001} to {101}

Anatase TiO(2) microspheres with controlled surface morphologies and exposed crystal facets were directly synthesized on metal titanium foil substrates by means of a facile, one-pot hydrothermal method without use of any templating reagent. The obtained products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelecron spectroscopy (XPS), and the focused ion beam (FIB) technique. The sizes of the resultant microspheres ranged from 1.1 to 2.1 μm. The transformation of anatase TiO(2) microspheres with exposed {001} facets surface to nanosheets surface with {101} facets was achieved by simply controlling the hydrothermal reaction time. The anatase TiO(2) microspheres with exposed square-shaped plane {001} facets were obtained by controlling the reaction time at 1 h. The prolonged reaction time transforms the anatase TiO(2) microspheres with exposed square-shaped plane {001} facets to eroded {001} facets then to a nanosheet surface with exposed {101} facets. With hydrothermal synthesis, the surface morphological structure and crystal facets formation are highly dependent on dissolution/deposition processes, which can be strongly influenced by attributes, such as pH of the reaction media, the total concentration of dissolved and suspended titanium species, and the concentration of fluoride in the reaction solution. The changes of these attributes during the hydrothermal process were therefore measured and used to illustrate the morphology and crystal-facet transformation processes of anatase TiO(2) microspheres. The surface morphologies and crystal-facet transformations during hydrothermal processes were found to be governed by the compositional changes of the reaction media, driven by dynamically shifted dissolution/deposition equilibria. The photocatalytic activities of the photoanodes made of anatase TiO(2) microspheres were evaluated. The experimental results demonstrated that the photocatalytic activity of anatase TiO(2) microspheres with exposed {001} facets was found to be 1.5 times higher than that of the anatase TiO(2) microspheres with exposed {101} facets.     

Hierarchical TiO2 microspheres: synergetic effect of {001} and {101} facets for enhanced photocatalytic activity

Well-faceted nanocrystals of anatase TiO(2) with specific reactive facets have attracted extraordinary research interest due to their many intrinsic shape-dependent properties. In this work, hierarchical TiO(2) microspheres consisting of anatase nanosheets or decahedrons were synthesized by means of a facile hydrothermal technique; meanwhile, the percentage of {001} facets can be tuned from 82 to 45%. Importantly, by investigating the photo-oxidation reactions for ˙OH radical generation and photoreduction reactions for hydrogen evolution, the TiO(2) microspheres consisting of nano-decahedrons with 45% {001} facets show superior photoreactivity (more than 4.8-times) compared to the nanosheets with 82% {001} facets. By analyzing the results of scanning electron microscopy (SEM), photoluminescence (PL) and first-principles density functional theory (DFT) calculations, a model of charge separation between the well-formed {001} and {101} facets is proposed, and the enhanced photocatalytic efficiency is largely attributed to the efficient separation of photogenerated charges among the crystal facets co-exposed.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

暴露{001}面TiO2纳米片分等级花状结构的制备及其光催化活性

以钛酸盐纳米管为前驱体,在HF-H2O-C2H5OH的混合溶液中,采用一种简单的醇热方法合成了具有87%暴露{001}面的TiO2纳米片自组装形成的分等级花状TiO2超结构.运用X射线衍射、扫描电镜、透射电镜和N2吸附-脱附等方法对样品进行了表征,并在紫外光照射下于空气和溶液中分别考察了其光催化降解丙酮和甲基橙反应活性...     

Facet-Control versus Co-Catalyst-Control in Photocatalytic H2 Evolution from Anatase TiO2 Nanocrystals

Titanium dioxide (TiO₂) and, in particular, its anatase polymorph, is widely studied for photocatalytic H₂ production. In the present work, we examine the importance of reactive facets of anatase crystallites on the photocatalytic H₂ evolution from aqueous methanol solutions. For this, we synthesized anatase TiO₂ nanocrystals with a large amount of either {001} facets, that is, nanosheets, or {101} facets, that is, octahedral nanocubes, and examined their photocatalytic H₂ evolution and then repeated this procedure with samples where Pt co-catalyst is present on all facets. Octahedral nanocubes with abundant {101} facets produce >4 times more H₂ than nanosheets enriched in {001} facets if the reaction is carried out under co-catalyst-free conditions. For samples that carry Pt co-catalyst on both {001} and {101} facets, faceting loses entirely its significance. This demonstrates that the beneficial role of faceting, namely the introduction of {101} facets that act as electron transfer mediator is relevant only for co-catalyst-free TiO₂ surfaces.     

Synthesis of nano-sized anatase TiO2 with reactive {001} facets using lamellar protonated titanate as precursor

Nano-sized anatase TiO(2) with exposed {001} facets was synthesized from lamellar protonated titanate precursor. Owing to small size (ca. 11 nm) and high surface area (155 m(2) g(-1)), the crystals with 26.1% {001} facets exhibited markedly superior photoactivity to reference ca. 76 nm anatase TiO(2) nanosheets with 88.4% {001} facets.     

Enhancing the Photocatalytic Activity of Anatase TiO2 by Improving the Specific Facet‐Induced Spontaneous Separation of Photogenerated Electrons and Holes

Recently, it has been proven that directional flow of photogenerated charge carriers occurs on specific facets of TiO₂ nanocrystals. Herein, we demonstrate that the photocatalytic activity of anatase TiO₂ nanocrystals in both photoreduction and photooxidation processes can be enhanced by selectively depositing Pt nanoparticles on the {101} facets, which strengthens spontaneously surface‐induced separation between photogenerated electrons and holes in the photocatalysis process. An optimal ratio of the oxidative {001} facets to the reductive {101} facets exists with regard to the photocatalysis of the faceted TiO₂ nanocrystals, and this is crucial for balancing the recombination and redox reaction rates of photogenerated electrons and holes. The present work might help us gain deeper insight into the relation between the specific surface of semiconductor photocatalysts and their photocatalytic activities and provides us with a new route to design photocatalysts with high photocatalytic activity.     

Tunable photocatalytic selectivity of TiO2 films consisted of flower-like microspheres with exposed {001} facets

TiO(2) films composed of flower-like TiO(2) microspheres with exposed {001} facets were synthesized by a simple one-pot hydrothermal method and exhibited tunable photocatalytic selectivity towards decomposition of azo dyes in water by modifying the surface of TiO(2) microspheres as well as by varying the degree of etching of {001} facets.     

Intrinsic catalytic structure of gold nanoparticles supported on TiO2

Despite the fragility of TiO(2) under electron irradiation, the intrinsic structure of Au/TiO(2) catalysts can be observed by environmental transmission electron microscopy. Under reaction conditions (CO/air 100?Pa), the major {111} and {100} facets of the gold nanoparticles are exposed and the particles display a polygonal interface with the TiO(2) support bounded by sharp edges parallel to the 〈110〉 directions.     

A facile synthesis of anatase TiO2 nanosheets-based hierarchical spheres with over 90% {001} facets for dye-sensitized solar cells

Anatase TiO(2) nanosheets-based hierarchical spheres with over 90% {001} facets synthesized via a diethylene glycol-solvothermal route were used as photoanodes of dye-sensitized solar cells, which generated an energy conversion efficiency of 7.51%.