Synthesis and Photocatalytic Activity of TiO2/CdS Nanocomposites with Co-Exposed Anatase Highly Reactive Facets

In this work, TiO₂/CdS nanocomposites with co-exposed {101}/[111]-facets (NH4F-TiO2/CdS), {101}/{010} facets (FMA-TiO2/CdS), and {101}/{010}/[111]-facets (HF-TiO2/CdS and Urea-TiO2/CdS) were successfully synthesized through a one-pot solvothermal method by using [Ti₄O₉]²⁻ colloidal solution containing CdS crystals as the precursor. The crystal structure, morphology, specific surface area, pore size distribution, separation, and recombination of photogenerated electrons/holes of the TiO₂/CdS nanocomposites were characterized. The photocatalytic activity and cycling performance of the TiO₂/CdS nanocomposites were also investigated. The results showed that as-prepared FMA-TiO₂/CdS with co-exposed {101}/{010} facets exhibited the highest photocatalytic activity in the process of photocatalytic degradation of methyl orange (MO), and its degradation efficiency was 88.4%. The rate constants of FMA-TiO₂/CdS was 0.0167 min⁻¹, which was 55.7, 4.0, 3.7, 3.5, 3.3, and 1.9 times of No catalyst, CdS, HF-TiO₂/CdS, NH₄F-TiO₂/CdS, CM-TiO₂, Urea-TiO₂/CdS, respectively. The highest photocatalytic activity of FMA-TiO₂/CdS could be attributed to the synergistic effects of the largest surface energy, co-exposed {101}/{010} facets, the lowest photoluminescence intensity, lower charge-transfer resistance, and a higher charge-transfer efficiency.     

Facet-Control versus Co-Catalyst-Control in Photocatalytic H2 Evolution from Anatase TiO2 Nanocrystals

Titanium dioxide (TiO₂) and, in particular, its anatase polymorph, is widely studied for photocatalytic H₂ production. In the present work, we examine the importance of reactive facets of anatase crystallites on the photocatalytic H₂ evolution from aqueous methanol solutions. For this, we synthesized anatase TiO₂ nanocrystals with a large amount of either {001} facets, that is, nanosheets, or {101} facets, that is, octahedral nanocubes, and examined their photocatalytic H₂ evolution and then repeated this procedure with samples where Pt co-catalyst is present on all facets. Octahedral nanocubes with abundant {101} facets produce >4 times more H₂ than nanosheets enriched in {001} facets if the reaction is carried out under co-catalyst-free conditions. For samples that carry Pt co-catalyst on both {001} and {101} facets, faceting loses entirely its significance. This demonstrates that the beneficial role of faceting, namely the introduction of {101} facets that act as electron transfer mediator is relevant only for co-catalyst-free TiO₂ surfaces.     

Effects of crystallinity, {001}/{101} ratio,and Au decoration on the photocatalytic activity of anatase TiO2 crystals

Anatase TiO₂ nanocrystals and sub-microcrystals with truncated octahedral bipyramidal morphologies were prepared by direct calcination of TiOF₂ precursors. The as-prepared TiO₂ samples were thoroughly characterized by X-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy, N₂ adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-visible diffuse spectroscopy. It was found that the crystallinity, grain size, and {001}/{101} ratio of the samples can be increased by raising the calcination temperature from 500 to 800 °C. The higher crystallinity and {001}/{101} facet ratio resulted in an increase in both aqueous and gas-phase photocatalytic activities, by inhibiting the recombination and separation of electrons and holes. After selecting two TiO₂ samples with high crystallinity and {001}/{101} ratio, Au nanoparticles were decorated on their surfaces, and the photocatalytic activity of the resulting samples under visible light illumination was studied. It was found that the visible light-induced photocatalytic activity increased by 2.6 and 4.8 times, respectively, upon Au decoration of the samples prepared by calcination of TiOF₂ at 700 and 800 °C.     

Prolonging charge-separation states by doping lanthanide-ions into {001}/{101} facets-coexposed TiO2 nanosheets for enhancing photocatalytic H2 evolution

Ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets have attracted considerable attention because of their high photocatalytic activity. However, the charge-separated states in the TiO₂ nanosheets must be extended to further enhance their photocatalytic activity for H₂ evolution. Herein, we present a successful attempt to selectively dope lanthanide ions into the {101} facets of ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets through a facile one-step solvothermal method. The lanthanide doping slightly extended the light-harvesting region and markedly improved the charge-separated states of the TiO₂ nanosheets as evidenced by UV-vis absorption and steady-state/transient photoluminescence spectra. Upon simulated sunlight irradiation, we observed a 4.2-fold enhancement in the photocatalytic H₂ evolution activity of optimal Yb³⁺-doped TiO₂ nanosheets compared to that of their undoped counterparts. Furthermore, when Pt nanoparticles were used as cocatalysts to reduce the H₂ overpotential in this system, the photocatalytic activity enhancement factor increased to 8.5. By combining these results with those of control experiments, we confirmed that the extended charge-separated states play the main role in the enhancement of the photocatalytic H₂ evolution activity of lanthanide-doped TiO₂ nanosheets with coexposed {001}/{101} facets.     

Enhanced and suppressed effects of ionic liquid on the photocatalytic activity of TiO2

The effects of a room temperature ionic liquid, 1-butyl-3-methylimidazolium terafluoroborate ([Bmim]BF₄), on the photocatalytic performance of Degussa P25 TiO₂ were investigated. Also, the photocatalysis mechanism was systematically analyzed by conducting different reactive radical trapping experiments. The results showed that photogenerated electrons were the main reactive species involved in the photocatalytic degradation of methyl orange (MO), while ?OH radicals and photogenerated holes played an important role in the photocatalytic decomposition of rhodamine B (RhB). The addition of ionic liquid (IL) could slightly enhance the photocatalytic degradation rate of MO because adsorption of [Bmim]⁺ ions on the TiO₂ surface not only enhanced traping and transfer of photogenerated electrons, but also facilitated adsorption of negatively charged MO. On the contrary, IL suppressed the degradation rate of RhB because [Bmim]⁺ on the TiO₂ surface not only hindered the access of positively charged RhB to TiO₂, but also restricted the diffusion of positively charged holes to the TiO₂/solution interface.     

锐钛矿(001)与(101)晶面在光催化反应中的作用

采用水热法制备了(001)和(101)晶面暴露的单晶锐钛矿TiO₂颗粒. 利用光还原沉积贵金属(Au, Ag, Pt)和光氧化沉积金属氧化物(PbO₂, MnO_x)的方法研究了暴露的锐钛矿(001)和(101)晶面在光催化中的作用. 通过透射电子显微镜(TEM)、扫描电子显微镜(STM)、能量色散X射线光谱仪(EDX)和X射线光电子能谱(XPS)的表征, 发现发生光还原反应生成的贵金属粒子主要沉积在暴露的锐钛矿(101)晶面上, 而发生光氧化反应产生的金属氧化物颗粒主要沉积在暴露的锐钛矿(001)晶面上. 此结果表明光激发产生的电子与空穴主要并分别分布在单晶锐钛矿TiO₂的(101)与(001)晶面上, 并在其上参与光催化还原反应和氧化反应. 同时也表明暴露的不同晶面对光生电荷具有分离效应. 基于本研究可以认为同时暴露分别进行氧化和还原反应的晶面可以有效促进光催化反应.     

AgI Microplate Monocrystals with Polar {0001} Facets: Spontaneous Photocarrier Separation and Enhanced Photocatalytic Activity

Elucidating the facet‐dependent photocatalytic activity of semiconductor photocatalysts is important in improving the overall efficiency of photocatalysis. Furthermore, combining facet control with selective deposition of oxidation and/or reduction cocatalysts on specific faces of semiconductor photocatalysts is potentially an effective strategy to synergistically optimize the functionality of photocatalysts. In the present study, high‐purity wurtzite‐type β‐AgI platelet microcrystals with polar {0001} facets were prepared by a facile polyvinylpyrrolidone‐assisted precipitation reaction. The polar‐faceted AgI microplates were used as archetypes to demonstrate preferential diametric migration (i.e., effective separation) of photogenerated electrons and holes along the c axis. Such vectorial electron–hole separation stems from the asymmetric surface structures, which give rise to distinct photoexcited reaction behaviors on the ±(0001) polar facets of wurtzite‐type semiconductors. Furthermore, on selective deposition of Ag and MnO_x (1.5<x<2) cocatalysts on the reductive (0001) and oxidative (000$\bar 1$ ) facets, respectively, photocatalytic activity of the AgI microplates in degrading organic pollutants was dramatically enhanced thanks to the broad light‐absorption range, strong dye‐adsorption ability, and effective spatial separation of photocarriers.     

Beyond Reduction Cocatalysts: Critical Role of Metal Cocatalysts in Photocatalytic Oxidation of Methane with Water**

Environmentally sustainable and selective conversion of methane to valuable chemicals under ambient conditions is pivotal for the development of next-generation photocatalytic technology. However, due to the lack of microscopic knowledge about non-thermal methane conversion, controlling and modulating photocatalytic oxidation processes driven by photogenerated holes remain a challenge. Here, we report novel function of metal cocatalysts to accept photogenerated holes and dominate selectivity of methane oxidation, which is clearly beyond the conventional concept in photocatalysis that the metal cocatalysts loaded on the surfaces of semiconductor photocatalysts mostly capture photogenerated electrons and dominate reduction reactions exclusively. The novel photocatalytic role of metal cocatalysts was verified by operando molecular spectroscopy combined with real-time mass spectrometry for metal-loaded Ga₂O₃ model photocatalysts under methane and water vapor at ambient temperature and pressure. Our concept of metal cocatalysts that work as active sites for both photocatalytic oxidation and reduction provides a new understanding of photocatalysis and a solid basis for controlling non-thermal redox reactions by metal-cocatalyst engineering.     

Graphite-like carbon deposited anatase TiO<Subscript>2</Subscript> single crystals as efficient visible-light photocatalysts

Graphite-like carbon deposited single-crystal anatase TiO₂ with exposed {001} facets was fabricated through a two-step solvothermal process by using glucose as carbon source. The physicochemical properties of the as-prepared samples were investigated by X-ray diffraction, Brunauer-Emmett-Teller, transmission electron microscopy, Raman, UV–vis diffuse reflectance spectra, electrochemical impedance spectroscopy and surface photovoltage spectroscopy. These results demonstrated that graphite-like carbon layers were deposited on the surface of TiO₂ single-crystal nanosheets with exposed highly reactive {001} facets via the dehydration of glucose during the process of hydrothermal treatment. The loading of the graphite-like carbon layers could effectively extend the light absorption edge of the single-crystal anatase TiO₂ nanosheets to visible light region and accelerate the separation of photo-generated electrons and holes, contributing an excellent visible-light driven photocatalytic performance to the graphite-like carbon deposited single-crystal anatase TiO₂ nanosheets for the degradation of methyl orange.     

Graphitic-C<Subscript>3</Subscript>N<Subscript>4</Subscript> quantum dots decorated {001}-faceted TiO<Subscript>2</Subscript> nanosheets as a 0D/2D composite with enhanced solar photocatalytic activity

Zero-dimensional (0D)/two-dimensional (2D) heterojunctions have attracted great attention in photocatalysis due to their superior interfacial effects. In this work, 0D g-C₃N₄ quantum dots (CNQDs) were firstly used to modify {001}-faceted 2D TiO₂ nanosheets by a simple solvothermal method. During the controlled growth of TiO₂ nanosheets with exposed reactive {001} facets, the CNQDs can be simultaneously assembled on the surface of TiO₂ nanosheets in a highly dispersive way. The 0D/2D composite containing only 0.5% of CNQDs shows the optimized solar photocatalytic activity for the degradation of rhodamine B and 4-chlorophenol. More importantly, the 0D/2D composite exhibits a better solar photocatalytic activity than the bulk g-C₃N₄/TiO₂ nanosheets composite. This improvement can be ascribed to the close interfacial contact and strong interaction between the highly dispersed CNQDs and the TiO₂ nanosheets, which could lead to efficient separation of the photogenerated electron–hole pairs, provide more catalytic active sites, and enhance the absorption of solar light. The 0D/2D composite also shows good stability for its practical applications.     

Highly Facet‐Dependent Photocatalytic Properties of Cu2O Crystals Established through the Formation of Au‐Decorated Cu2O Heterostructures

This work confirms the presence of a large facet‐dependent photocatalytic activity of Cu₂O crystals through sparse deposition of gold particles on Cu₂O cubes, octahedra, and rhombic dodecahedra. Au‐decorated Cu₂O rhombic dodecahedra and octahedra showed greatly enhanced photodegradation rates of methyl orange resulting from a better separation of the photogenerated electrons and holes, with the rhombic dodecahedra giving the best efficiency. Au–Cu₂O core–shell rhombic dodecahedra also displayed a better photocatalytic activity than pristine rhombic dodecahedra. However, Au‐deposited Cu₂O cubes, pristine cubes, and Au‐deposited small nanocubes bound by entirely {100} facets are all photocatalytically inactive. X‐ray photoelectron spectra (XPS) showed identical copper peak positions for these Au‐decorated crystals. Remarkably, electron paramagnetic resonance (EPR) measurements indicated a higher production of hydroxyl radicals for the photoirradiated Cu₂O rhombic dodecahedra than for the octahedra, but no radicals were produced from photoirradiated Cu₂O cubes. The Cu₂O {100} face may present a high energy barrier through its large band edge bending and/or electrostatic repulsion, preventing charge carriers from reaching to this surface. The conventional photocatalysis model fails in this case. The facet‐dependent photocatalytic differences should be observable in other semiconductor systems whenever a photoinduced charge‐transfer process occurs across an interface.     

Unprecedented Eighteen‐Faceted BiOCl with a Ternary Facet Junction Boosting Cascade Charge Flow and Photo‐redox

Exposure of anisotropic crystal facets allows the directional transfer of photoexcited electrons (e^?) and holes (h⁺), for spatial charge separation. High‐index facets with a high density of low‐coordinated atoms always serve as reactive catalytic sites. However, preparation of multi‐facets or high‐index facets is highly challenging for layered bismuth‐based photocatalysts. Herein, we report the preparation of unprecedented eighteen‐faceted BiOCl with {001} top facets and {102} and {112} oblique facets via a hydrothermal process. Compared to the conventional BiOCl square plates with {001} top facets and {110} lateral facets, the eighteen‐faceted BiOCl has highly enhanced photocatalytic activity for H₂ evolution and hydroxyl radicals (^.OH) production. Theoretical calculations and photodeposition results disclose that the of eighteen‐faceted BiOCl has a well‐matched {001}/{102}/{112} ternary facet junction, which provides a cascade path for more efficient charge flow than the binary facet junction in BiOCl square plates.     

Oxygen-Deficient Dumbbell-Shaped Anatase TiO2−x Mesocrystals with Nearly 100 % Exposed {101} Facets: Synthesis,Growth Mechanism,and Photocatalytic Performance

The development of hierarchical TiO₂ superstructures with new morphologies and intriguing photoelectric properties for utilizing solar energy is known to be an effective approach to alleviate the serious problems of environmental pollution. Herein, unique oxygen-deficient dumbbell-shaped anatase TiO_2−x mesocrystals (DTMCs) enclosed by nearly 100 % {101} facets were readily synthesized by mesoscale transformation in TiCl₃/acetic acid (HAc) mixed solution, followed by calcination under vacuum. These mesocrystals exhibited much higher photoreactivity toward removing the model pollutants methyl orange and Cr^VI than truncated tetragonal bipyramidal anatase nanocrystals (TNCs), anatase mesocrystals built from truncated tetragonal bipyramidal anatase nanocrystals (TTMCs), and anatase mesocrystals constructed by anatase nanocrystals with nearly 100 % exposed {101} facets (TMCs), revealing that both the oxidation and reduction abilities of anatase TiO₂ were simultaneously enhanced upon fabricating an oxygen-deficient mesocrystalline architecture with about 100 % exposed {101} facets. Further characterization illustrated that such an enhancement of photoreactivity was mainly due to the strengthened light absorption, boosted charge carrier separation, and nearly 100 % exposed {101} facets of the oxygen-deficient dumbbell-shaped anatase mesocrystals. This work will be useful for guiding the synthesis of oxygen-deficient ordered superstructures of metal oxides with desired morphologies and exposed facets for promising applications in environmental remediation.     

微观形貌可控TiO2的制备及其光解水产氢性能

通过简单的沉淀、水热、溶剂热和溶胶凝胶法分别制备出实心球（s-TiO₂）、空心球（h-TiO₂）、纳米管（a-TNT）和介孔形状（m-TiO₂）的锐钛矿晶型结构TiO₂光催化材料。采用HRTEM、FESEM、XRD、UV-Vis、N₂吸-脱附和光解水制氢反应等对催化材料的微观表面结构、光吸收性能以及不同形貌光催化剂的光解水制氢的性能对比研究。结果表明：s-TiO₂具有最高的光催化活性,主要归功于s-TiO₂独特的微观形貌结构所致,s-TiO₂是由亚微晶颗粒组成的介孔状实心球,亚微晶粒径相比较其它形貌的材料要小,有利于光生载流子的迁移,抑制电子-空穴对的体相复合,导致活性提高。同时,晶化过程用于传质通道的无序微孔可以束缚用作牺牲剂的CH₃OH分子,使得空穴快速被牺牲剂消耗,减少与电子复合。     

微观形貌可控TiO2的制备及其光解水产氢性能

通过简单的沉淀、水热、溶剂热和溶胶凝胶法分别制备出实心球(s-TiO_2)、空心球(h-TiO_2)、纳米管(a-TNT)和介孔形状(mTiO_2)的锐钛矿晶型结构TiO_2光催化材料。采用HRTEM、FESEM、XRD、UV-Vis、N2吸-脱附和光解水制氢反应等对催化材料的微观表面结构、光吸收性能以及不同形貌光催化剂的光解水制氢的性能对比研究。结果表明:s-TiO_2具有最高的光催化活性,主要归功于s-TiO_2独特的微观形貌结构所致,s-TiO_2是由亚微晶颗粒组成的介孔状实心球,亚微晶粒径相比较其它形貌的材料要小,有利于光生载流子的迁移,抑制电子-空穴对的体相复合,导致活性提高。同时,晶化过程用于传质通道的无序微孔可以束缚用作牺牲剂的CH3OH分子,使得空穴快速被牺牲剂消耗,减少与电子复合。     

Morphology‐Engineered Highly Active and Stable Ru/TiO2 Catalysts for Selective CO Methanation

Ru/TiO₂ catalysts exhibit an exceptionally high activity in the selective methanation of CO in CO₂‐ and H₂‐rich reformates, but suffer from continuous deactivation during reaction. This limitation can be overcome through the fabrication of highly active and non‐deactivating Ru/TiO₂ catalysts by engineering the morphology of the TiO₂ support. Using anatase TiO₂ nanocrystals with mainly {001}, {100}, or {101} facets exposed, we show that after an initial activation period Ru/TiO₂‐{100} and Ru/TiO₂‐{101} are very stable, while Ru/TiO₂‐{001} deactivates continuously. Employing different operando/in situ spectroscopies and ex situ characterizations, we show that differences in the catalytic stability are related to differences in the metal–support interactions (MSIs). The stronger MSIs on the defect‐rich TiO₂‐{100} and TiO₂‐{101} supports stabilize flat Ru nanoparticles, while on TiO₂‐{001} hemispherical particles develop. The former MSIs also lead to electronic modifications of Ru surface atoms, reflected by the stronger bonding of adsorbed CO on those catalysts than on Ru/TiO₂‐{001}.     

Effects of anatase TiO2 morphology and surface fluorination on environmentally relevant photocatalytic reduction and oxidation reactions

Aiming at clarifying the interplay on TiO₂ photoactivity between particle morphology and surface fluorination, the photocatalytic performance of anatase nanocrystals, characterized by a pseudo-spherical shape or a nanosheet structure, is investigated in both a reduction and an oxidation reaction, either in the absence or in the presence of added fluoride anions. Cr(VI) photocatalytic reduction is strongly favored by a large exposure of anatase {001} facets; however, surface fluorination leads in this case to a morphology-independent photoactivity decrease, due to the decreased adsorption of the reaction substrate. More interestingly, a beneficial synergistic effect between the platelet-like anatase morphology and TiO₂ surface fluorination is clearly outlined in Rhodamine B photocatalytic degradation, possibly resulting from the intrinsic ability of fluorinated {001} anatase facets of boosting ^?OH radical mediated oxidation paths, due to their larger amount of surface –OH groups, as revealed using Fourier-transform infrared spectroscopy.     

Curious behaviors of photogenerated electrons and holes at the defects on anatase,rutile, and brookite TiO2 powders: A review

Photocatalytic reactions are governed by photogenerated charge carriers upon band gap excitation. Therefore, for better understanding of the mechanism, the dynamics of photocarriers should be studied. One of the attractive materials is TiO₂, which has been extensively investigated in the field of photocatalysis. This review article summarizes our recent works of time-resolved visible to mid-IR absorption measurements to elucidate the difference of anatase, rutile, and brookite TiO₂ powders. The distinctive photocatalytic activities of these polymorphs are determined by the electron-trapping processes at the defects on powders. Powders are rich in defects and these defects capture photogenerated electrons. The depth of the trap is crystal phase dependent, and they are estimated to be < 0.1 eV, ∼0.4 eV and ∼0.9 eV for anatase, brookite, and rutile, respectively. Electron trapping reduces probability to meet with holes and then elongate the lifetime of holes. Therefore, it works negatively for the reaction of electrons but positively works for the reaction of holes. In the steady-state reactions, both electrons and holes should be consumed. Hence, the balance between the positive and negative effects of defects determines the distinctive photocatalytic activities of anatase, rutile, and brookite TiO₂ powders.     

Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible-Light Photocatalytic Water Splitting

The strong band-to-band absorption of photocatalysts spanning the whole visible-light region (400–700 nm) is critically important for solar-driven photocatalysis. Although it has been actively and widely used as a photocatalyst for various reactions in the past four decades, TiO₂ has a very poor ability to capture the whole spectrum of visible light. In this work, by controlling the spatially homogeneous distribution of boron and nitrogen heteroatoms in anatase TiO₂ microspheres with a predominance of high-energy {001} facets, a strong visible-light absorption spectrum with a sharp edge beyond 680 nm has been achieved. The red TiO₂ obtained with homogeneous doping of boron and nitrogen shows no increase in defects like Ti³⁺ that are commonly observed in doped TiO₂. More importantly, it has the ability to induce photocatalytic water oxidation to produce oxygen under the irradiation of visible light beyond 550 nm and also the photocatalytic reduction of water to produce hydrogen under visible light. These results demonstrate the great promise of using red TiO₂ for visible-light photocatalytic water splitting and also reveal an attractive strategy for realizing the wide-spectrum visible-light absorption of wide-band-gap oxide photocatalysts.     

Study of Oxygen Vacancies on Different Facets of Anatase TiO2

Anatase TiO₂ samples with different ratios of {101} to {001} facets were prepared with hydrothermal method and further treated under three specific calcination atmospheres (air, H₂, N₂). The characterization results indicate that {001} facets may generate more oxygen vacancies and more Ti³⁺ species than {101} facets.