SILAR法制备TiO2/CdS/Co-Pi水氧化光阳极及其性能

采用连续离子层吸附法（SILAR）沉积CdS制备type-Ⅱ异质结TiO₂/CdS光阳极,用光电化学沉积法在TiO₂/CdS表面沉积催化剂（Co-Pi）得到TiO₂/CdS/Co-Pi水氧化光阳极。通过X射线衍射（XRD）仪、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）仪等对样品结构及组成进行分析,证明CdS与Co-Pi已成功负载在TiO₂表面。用已制备的光阳极在中性溶液中模拟水氧化测试,在较低外偏压（0 V（vs Ag/AgCl））和无电子牺牲剂的情况下,即使在可见光照射下,依然得到较高的初始光电流和稳定光电流,分别为1.3和0.5 mA·cm^-2,表明制备的光阳极可以在可见光照下有效地驱动水氧化反应。光电化学池的工作原理为,CdS吸收光子产生光生电子-空穴,TiO₂和Co-Pi分别传输电子和空穴,空穴进行水氧化,电子转移到阴极完成质子还原。     

CdS纳米晶@碳点复合物膜的电致化学发光

采用热解柠檬酸法制备碳点(CDs),并将之与表面无包裹剂的CdS纳米晶(CdS NCs)超声复合制备CdS纳米晶@碳点(CdS NCs@CDs)复合物。研究了复合物膜阴极电致化学发光(ECL),探讨了CDs对CdS纳米晶膜ECL增强的机理。CDs分散性良好、尺寸在1.5~4 nm之间;与粒径约为4 nm的CdS纳米晶按体积比2∶3复合后,在360 nm光激发下复合物具有最强的荧光发射且表现为CDs的荧光。同时,复合物膜产生归属于激发态CdS纳米晶的最强的ECL发射,且ECL发光峰起置电势正移至-1.05 V。复合物膜的ECL发射是pH依赖的,在pH值为6时,复合物膜具有最大的ECL强度,为CdS纳米晶膜ECL强度的19倍。这种ECL增强源于CDs能束缚大量电子产生局域电场从而促进近邻CdS纳米晶激发态的形成与弛豫。     

Water-soluble silica-overcoated CdS:Mn/ZnS semiconductor quantum dots

Highly luminescent and photostable CdS:Mn/ZnS core/shell quantum dots are not water soluble because of their hydrophobicity. To create water-soluble quantum dots by an appropriate surface functionalization, CdS:Mn/ZnS quantum dots synthesized in a water-in-oil (W/O) microemulsion system (reverse micelles) were consecutively overcoated with a very thin silica layer ( approximately 2.5 nm thick) within the same reverse micellar system. The water droplet serves as a nanosized reactor for the controlled hydrolysis and condensation of a silica precursor, tetraethyl orthosilicate (TEOS), using an ammonium hydroxide (NH4OH) catalyst. Structural characterizations with transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS) indicate that the silica-quantum dot nanocomposites consist of a layered structure. Owing to the amorphous, porous nature of a silica layer, the optical and photophysical properties of silica-overcoated CdS:Mn/ZnS quantum dots are found to remain close to those of uncoated counterparts.     

Core-shell structure CdS/TiO2 for enhanced visible-light-driven photocatalytic organic pollutants degradation

CdS modified mesoporous titania core-shell spheres (CdS/CS-TiO₂) with enhanced visible-light activity were synthesized by an in situ method. This method included two steps: planting CdO into the framework of anatase TiO₂ core-shell spheres and then converting it to CdS by ion-exchange. The physicochemical properties of the obtained samples were investigated by X-ray diffraction, scanning electron microscopy, transmission electronic micrograph, UV–vis diffuse reflectance spectra and nitrogen sorption. The in situ strategy resulted in CdS quantum dots highly dispersed in CS-TiO₂ without destroying the mesoporous core-shell structure. Compared with CS-TiO₂, the as-synthesized samples exhibited stronger visible-light absorption capability and greatly enhanced photocatalytic activity toward the degradation of Rhodamine B and 4-chlorophenol aqueous solution under visible light irradiation (λ > 420 nm).     

Porous phosphate heterostructures containing CdS quantum dots: assembly, characterization and photoluminescence

The synthesis and characterization of cadmium sulphide (CdS) quantum dots, conjugated in a porous phosphate heterostructure functionalized with aminopropyl groups is described. The resulting material has fluorescence properties with maximum emission intensity at 575 nm. The fluorescent materials are not soluble in water and exhibit high stability in aqueous solution in the pH ranges from 2 to 9. Energy dispersive X-ray spectroscopy confirmed the qualitative elemental composition of the synthesized materials and X-ray photoelectron spectra showed a surface S/Cd atomic ratio of 1.09. SEM images show that the materials are amorphous, possessing porous with sizes of several tens nanometres, homogeneous and exhibit a layered morphology. The adsorption–desorption analysis by N₂ at 77 K showed the accessibility of the CdS quantum dots onto the pores of the structure. The CdS quantum dots were stabilized by mercaptopropionic acid and bounded to the host materials by amine groups.     

CdSe/CdS/SiO2复合纳米球的制备及发光性能

采用两相法合成了CdSe/CdS核-壳结构的量子点, 用氨水催化水解正硅酸乙酯制得复合结构的CdSe/CdS/SiO₂发光纳米球. 通过对量子点用量、氨水用量、反应时间及溶剂比例等实验条件的调节, 得到了单分散性较好, 尺寸在23~145 nm的复合发光纳米球. 利用紫外-可见吸收光谱和荧光发射光谱对其发光性能进行了研究, 同时利用透射电镜(TEM)观察复合纳米球的形貌. 结果表明, 复合发光纳米球样品的最高荧光量子产率可达8%.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

谷胱甘肽稳定的高性能CdTe/CdS核壳型量子点制备及应用于荧光免疫检测米醋中痕量黄曲霉毒素B1

谷胱甘肽作稳定剂水相合成CdTe/CdS核壳型量子点,以EDC/NHS为活化剂对黄曲霉毒素B1(AFB1)抗体进行量子点标记,然后用牛血清蛋白封闭抗体。通过对量子点和标记抗体性能的研究发现,CdTe/CdS核壳型量子点荧光的强度和稳定性较裸壳的CdTe量子点分别提高了4倍和2倍以上。由于谷胱甘肽碳链较长,量子点对抗体尤其是活性位点处的空间构型影响减少,从而改善了量子点标记抗体的稳定性和活性,CdTe/CdS标记的AFB1抗体与AFB1免疫前后荧光强度变化显示抗体至少可以稳定6 d。基于谷胱甘肽稳定的高性能CdTe/CdS量子点,建立了一种荧光免疫检测黄曲霉毒素B1的新方法。AFB1浓度在0.68～40 pmol/L之间荧光强度与浓度呈线性关系,相关系数(R2)为0.9914,检出限为0.3 pmol/L。方法已成功应用于米醋样品中痕量黄曲霉毒素B1的测定。     

A Universal Strategy for Activating the Multicolor Room‐Temperature Afterglow of Carbon Dots in a Boric Acid Matrix

Carbon dots (CDs) have attracted attention in metal‐free afterglow materials, but most CDs were heteroatom‐containing and the afterglow emissions are still limited to the short‐wavelength region. A universal approach to activate the room‐temperature phosphorescence (RTP) of both heteroatom‐free and heteroatom‐containing CDs was developed by one‐step heat treatment of CDs and boric acid (BA). The introduction of an electron‐withdrawing boron atom in composites can greatly reduce the energy gap between the singlet and triplet state; the formed glassy state can effectively protect the excited triplet states of CDs from nonradiative deactivation. A universal host for embedding CDs to achieve long‐lifetime and multi‐color (blue, green, green‐yellow and orange) RTP via a low cost, quick and facile process was developed. Based on their distinctive RTP performances, the applications of these CD‐based RTP materials in information encryption and decryption are also proposed and demonstrated.     

构建S型异质结COF/CdS以增强太阳光产氢

高效利用太阳能是解决当前能源危机和环境问题的有效途径.光催化制氢技术具有绿色环保、成本低等优势,且氢气可作为能源载体,其燃烧产物仅为水,因此被认为是实现高效利用太阳能的最佳途径之一.为更好地利用太阳能,研究者们致力于开发具有良好可见光活性的光催化剂.CdS因具有良好的电荷转移能力和在可见光区域强吸收的特性,在光催化制氢...     

Band-edge ultrafast pump-probe spectroscopy of core/shell CdSe/CdS rods: assessing electron delocalization by effective mass calculations

CdSe/CdS dot/rods nanocrystals show interesting physical properties related to the band-alignment at the hetero-interface, which controls the band-edge electron delocalization over the rods. Here the differential transmission spectra of CdSe/CdS nanorod samples with different core sizes have been measured using excitation resonant to the core transition. The photo bleaching ratio between dot and rod transitions increases with the dot size, indicating a trend towards electron localization. This trend has been further quantified by performing effective mass calculations in which the conduction band misalignment was varied in order to reproduce the observed bleaching feature ratio. The best agreement was found for negligible conduction band misalignment for small dots of around 2.3 nm in diameter, and about -0.1 eV misalignment was estimated for the larger dots, above 3.5 nm in diameter. This shows that the band misalignment might be dependent on the geometry of the system, and we argue that this might be related to different strain developed at the hetero-interface.     

Carbon dots prepared for fluorescence and chemiluminescence sensing

Carbon dots(CDs) have attracted considerable research interest in recent years due to their unique optical properties, chemical inertness, facile synthesis from a wide range of starting materials, and advantages over classic quantum dots and organic dyes.Various methods have been developed for preparing the CDs, including chemical oxidation, hydro/solvothermal method,electrochemical method, microwave-assisted synthesis, and direct carbonization method. Importantly, the superior electronic properties of CDs including efficient light harvesting and prominent photoinduced electron transfer have aroused considerable attention in fluorescence(FL) and chemiluminescence(CL) sensing field. In this review, we aim to demonstrate the recent progress of CDs in the synthesis, FL and CL sensing applications. This review gives new insights into how to use different synthetic methods to tune the structure of the CDs, with the major focus on FL and CL sensing.     

Synthesis of ZnO nanorods and their application in quantum dot sensitized solar cells

ZnO nanorod thin films of different thicknesses and CdS quantum dots have been prepared by chemical method. X-ray diffraction pattern reveals that the CdS quantum dot and ZnO nanorods are of hexagonal structure. Field emission scanning electron microscope images show that the diameter of hexagonal shaped ZnO nanorods ranges from 110 to 200 nm and the length of the nanorod vary from 1.3 to 4.7 μm. CdS quantum dots with average size of 4 nm have been deposited onto ZnO nanorod surface using successive ionic layer adsorption and reaction method and the assembly of CdS quantum dot with ZnO nanorod has been used as photo-electrode in quantum dot sensitized solar cells. The efficiency of the fabricated CdS quantum dot-sensitized ZnO nanorod-based solar cell is 1.10 % and is the best efficiency reported so far for this type of solar cells.     

Environmentally friendly cleaner water-soluble fluorescent carbon dots coated with chitosan: synthesis and its application for sensitivity determination of Cr(VI) ions

In the current work, novel environmentally friendly water-soluble fluorescent carbon dots coated with chitosan (CDs/CTS) were successively synthesized via a facile and green preparation procedure. The fluorescent carbon dots were prepared through a simple, convenient and one-step hydrothermal method in the presence of cellulose as a raw material. The CDs/CTS were connected together via intermolecular hydrogen bonds interaction and chemical bonds between hydroxyl and amino groups in the chitosan polymeric chains and hydroxyl groups of fluorescent carbon dots. This approach can be applied for milligram-scale preparation of these water-soluble particles. The CDs/CTS material showed blue fluorescence under UV exposure. The structure and morphology of as-prepared CDs/CTS were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy. The as-prepared CDs/CTS exhibited excellent fluorescent property and good stability. The fluorescence of as-prepared CDs/CTS could be quenched by the Cr(VI) ions. The effects of environmental factors on the fluorescence intensity were investigated in detail, and the obtained results showed that the optimum conditions for the Cr(VI) ions determination were as follows: 1:3 of mass ratio of CDs/CTS, 9.5 of pH and 20 min of reaction time. Under optimized experimental conditions, a novel fluorescent probe was developed for the detection of Cr(VI) ions, which exhibited wide linear ranges (0–600 μmol/L) and excellent selectivity. The proposed method was directly applied for the determination of Cr(VI) ions in water and soil samples with satisfactory results.     

Symmetry‐Breaking Charge‐Transfer Chromophore Interactions Supported by Carbon Nanodots

Carbon dots (CDs) and their derivatives are useful platforms for studying electron‐donor/acceptor interactions and dynamics therein. Herein, we couple amorphous CDs with phthalocyanines (Pcs) that act as electron donors with a large extended π‐surface and intense absorption across the visible range of the solar spectrum. Investigations of the intercomponent interactions by means of steady‐state and pump‐probe transient absorption spectroscopy reveal symmetry‐breaking charge transfer/separation and recombination dynamics within pairs of phthalocyanines. The CDs facilitate the electronic interactions between the phthalocyanines. Thus, our findings suggest that CDs could be used to support electronic couplings in multichromophoric systems and further increase their applicability in organic electronics, photonics, and artificial photosynthesis.     

荧光碳点的合成及对酿酒酵母的毒性研究

以葡萄糖为碳源采用溶剂热法合成了荧光碳点。紫外吸收光谱、荧光光谱以及透射电镜照片表明,所合成的荧光碳点发光性能优异,分散性好,且无团聚现象。荧光碳点原溶液出现浓度淬灭现象,稀释60倍情况下荧光最强。以酿酒酵母为模型生物,考察了不同生长时期(调整期、对数期早期、对数期中期)的酿酒酵母与不同浓度的荧光碳点共培养后的生长曲线。结果表明,即使荧光碳点浓度在27.75 mmol.L-1条件下也没有影响酵母菌的生长曲线,可认为基本没有细胞毒性。比较了相同荧光强度下的荧光碳点与CdTe量子点对酿酒酵母的细胞毒性,结果表明荧光碳点的毒性显著低于量子点的毒性。     

Enhanced visible-light-driven photocatalytic activities of 0D/1D heterojunction carbon quantum dot modified CdS nanowires

Zero-dimensional carbon dots (0D C-dots) and one-dimensional sulfide cadmium nanowires (1D CdS NWs) were prepared by microwave and solvothermal methods, respectively. A series of heterogeneous photocatalysts that consisted of 1D CdS NWs that were modified with 0D C-dots (C-dots/CdS NWs) were synthesized using chemical deposition methods. The mass fraction of C-dots to CdS NWs in these photocatalysts was varied. The photocatalysts were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and ultraviolet-visible spectroscopy. Their photocatalytic performance for the spitting of water and the degradation of rhodamine B (RhB) under visible light irradiation were investigated. The photocatalytic performance of the C-dots/CdS NWs was enhanced when compared with that of the pure CdS NWs, with the 0.4% C-dots/CdS NWs exhibiting the highest photocatalytic activity for the splitting of water and the degradation of RhB. The enhanced photocatalytic activity was attributed to a higher carrier density because of the heterojunction between the C-dots and CdS NWs. This heterojunction improved the electronic transmission capacity and promoted efficient separation of photogenerated electrons and holes.     

Unpredicted electron injection in CdS/CdSe quantum dot sensitized ZrO2 solar cells

A quantum dot sensitized solar cell based on a porous ZrO(2) film, sensitized with CdSe quantum dots using CdS as an intermediate layer is presented. We observe electron injection from photo-excited quantum dots into the ZrO(2), which is unexpected due to the much higher conduction band edge (closer to the vacuum level) of bulk ZrO(2) compared to TiO(2).     

CdTe/CdS量子点的Ⅰ-Ⅱ型结构转变与荧光性质

制备了壳层厚度可以精确控制的CdTe/CdS核壳量子点, 利用紫外-可见吸收光谱、光致发光光谱、透射电镜和时间分辨光谱等技术, 分析了CdS壳层厚度对CdTe量子点的荧光量子产率和光谱结构的影响规律. 发现了不同于CdSe/CdS, CdSe/ZnS, CdTe/ZnS等核壳量子点的荧光峰展宽、大幅度红移以及荧光寿命大幅度增加现象. 根据能带的位置关系, 随着CdS厚度的增加, CdTe从Ⅰ型结构逐渐过渡到Ⅱ型核壳结构. 对于Ⅱ型CdTe/CdS核壳量子点, 不仅存在CdTe核区导带电子与价带空穴间的直接复合, 还存在CdS壳层导带电子与CdTe核价带空穴界面处的间接复合, 发光机制的变化导致荧光峰的展宽、明显红移和荧光寿命的增加. 当壳层过厚时, 壳层表面新引入的缺陷会阻碍荧光寿命和量子产率的进一步提高.     

CdS/CdSe/TiO2多级空心微球光阳极中量子点覆盖度的提高

TiO₂多级空心微球(THHSs)具有高的比表面积、强的光散射效应以及良好的电子传输性质,以此作为光阳极材料,可以显著提升CdS/CdSe敏化太阳能电池(QDSSCs)的性能。但基于化学浴沉积方法获得的这一类电池中量子点在光阳极表面的覆盖度通常不高(50%左右),本文发展了一种基于表面选择性吸附原理的多步沉积方法,选取特定分子(正十二硫醇)限制已有量子点的生长,通过二次沉积成功提高了CdS/CdSe在TiO₂多级空壳微球表面的覆盖度。使用此方法最终得到高达85.4%的覆盖度。结果表明,量子点覆盖度的增加有效提高了电池对太阳光的利用率,使得光电流获得了明显的增加。同时,二氧化钛空白表面积的减小还可以抑制电子和空穴的复合。优化后的电池光电流密度为15.69 mA·cm^-2,填充因子为0.583,电压为0.605 V,最高光电转换效率为5.30%。