开放骨架磷酸铝AlPO4-12的晶化过程

以乙二胺为结构导向剂,在200℃加热物质的量组成为n_Al2O3:n_P2O5:n_en:n_H2O=1:1:2:226的初始混合物(en=乙二胺),合成了三维开放骨架磷酸铝化合物AlPO₄-12。用X-射线衍射、元素分析、pH测量、液体核磁共振以及电喷雾质谱研究了其晶化过程。依据质谱数据,开发了一个系统枚举在晶化过程中可能生成的小结构单元分子式的方法。研究发现在AlPO₄-12的晶化过程中经历了层状磷酸铝UiO-15和UiO-13中间相,液相中Al物种的浓度极低,在晶化过程中生成的小结构单元中P-OH逐渐增多,乙二胺分子逐渐质子化,在晶化过程中生成了磷酸铝的4元环和6元环。用电喷雾质谱研究晶化过程中的液相可以获得小结构单元的结构和组成信息。     

二丙胺的结构微调对磷酸铝分子筛晶化过程影响的凝胶组成依赖性

以二丙胺异构体（二正丙胺DPA和二异丙胺D-iPA）为结构导向剂,在200℃加热2组反应原料物质的量之比不同的初始凝胶,合成出了高结晶度的磷酸铝分子筛AlPO₄-11。利用X射线粉末衍射分析、元素分析等表征手段,研究了凝胶的晶化过程和液相的pH值以及Al和P的浓度演化。初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.2：75时,以DPA为结构导向剂,晶化过程中无中间相生成,而以D-iPA为结构导向剂时,晶化过程中生成了具有12元环孔道结构的磷酸铝分子筛AlPO₄-5中间相;初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.0：75时,以DPA为结构导向剂,晶化过程中生成了具有18元环孔道结构的磷酸铝分子筛VPI-5中间相,而以D-iPA为结构导向剂时,晶化过程中同时出现了VPI-5及AlPO₄-5两种中间相。表明对于同一种有机胺,凝胶物质的量之比的改变影响了其结构导向效应。理论计算结果显示质子化的DPA及D-iPA中N原子上的电荷有差异,表明有机胺的结构微调影响其结构导向效应,但该影响依赖于凝胶组成。     

计算机模拟研究磷酸铝AlPO4-H3相转变

用分子动力学方法模拟研究了磷酸铝AlPO₄-H₃在高温下的相转变过程. 从磷酸铝AlPO₄-H₃的结构出发, 通过去除非骨架的H2O分子和改变骨架四元环中T原子的上下连接顺序, 设计出一系列磷酸铝AlPO₄-H₃高温相的理论模型. 通过对这些理论模型进行全局几何优化, 讨论了它们的结构特点和热力学稳定性. 模拟结果表明, 磷酸铝AlPO₄-H₃在能量上有利于转变为AlPO₄-C, 进而转变为AlPO₄-D及一些新型未知的三维磷酸铝骨架.     

类固相法快速合成高钙镁离子交换性能的P型分子筛

以硅铝干凝胶为硅源和铝源,氢氧化钠为碱源,采用类固相法快速合成了P型分子筛,并通过X射线衍射（XRD）、扫描电镜（SEM）等手段对产品进行了表征分析。结果表明,硅铝干凝胶的组成n_SiO2/n_Al2O3=5,晶化时间和晶化温度分别为3 h、140℃,原料的组成n_Na2O/n_SiO2、n_H2O/n_SiO2=18.51时,可制备形貌均一、结晶良好的P型分子筛产品。与传统水热法相比,该方法极大地减少了合成过程的用水量,缩短了晶化时间,提高了产品的钙镁离子交换性能,从整体上优化了P型分子筛的合成工艺。     

微波场中T型分子筛的合成及晶化研究

研究了微波场中T型分子筛的结晶过程。考察了微波加热体系中合成参数如合成时间、溶胶组成、反应压力和模板剂用量对分子筛晶化的影响。微波加热的主要优点是减少合成时间,无模板剂的溶胶在普通加热条件下的晶化时间需要120 h,而在微波场中则仅需要20～25 h。另一方面,由于微波的快速加热特性促进了稳定相钙十字沸石的生成,从而减小了次稳定相T型分子筛的结晶区间。在未添加模板剂条件时,100 ℃下微波水热合成T型分子筛的结晶区间为：20≤n_SiO2/n_Al2O3≤22和0.31≤ n_M2O/n_SiO2≤0.33(其中M₂O=Na₂O+K₂O, n_Na/n_K=3和n_M2O/n_SiO2=11.70)。在普通加热和微波加热合成体系中,添加模板剂均能扩大结晶区间,同时还可以进一步减少合成时间。     

一元醇热法制备SrHfO3：Ce超微球发光粒子

以Sr(NO₃)₂和HfOCl₂·8H₂O为原料,乙醇/水作溶剂,KOH为矿化剂,Ce(NO₃)₃·6H₂O作为激活剂,用一元醇热法制备了掺杂Ce³⁺的SrHfO₃超微球粒子。用XRD、SEM、荧光光度计分析了粒子合成过程的物相变化、形貌特征及激发和发射光谱。结果表明：在n_Sr：n_Hf=1：1,V_C2H5OH：V_H2O=4：1,水热合成温度140℃,反应时间4h,pH=13.5的条件下,获得SrHfO₃：Ce形貌为球微、分散均匀的粒子,粒径约900nm。当Ce³⁺掺杂浓度为0.7mol%时发光强度最大。     

T型分子筛膜的合成、表征与渗透汽化性能

采用二次生长法,在不锈钢、α-Al₂O₃和莫来石多孔管状支撑体上分别合成了高渗透汽化性能的T型分子筛膜。考察了合成条件如合成时间、n(SiO₂)/n(Al₂O₃)、n(H₂O)/n(Al₂O₃)和硅源等对T型分子筛膜形成和分离性能的影响。通过XRD和SEM表征了膜的晶相和形貌。     

MFI沸石纳米片及b轴取向MFI沸石薄膜的制备

我们通过自下而上（bottom-up）的方法制备了高宽深比、高结晶度的b轴方向上超薄的MFI沸石纳米片,为制备b轴取向MFI沸石薄膜提供了基础。采用滑动涂覆法（slip coating method）在玻璃片载体上制备了厚度约为100 nm的b轴取向MFI纳米片晶种层。采用无模板剂二次生长法,抑制晶种层面外孪晶生长,实现了晶种层的面内外延生长。在合成体系的n_SiO2：n_Na2O：n_{C2 H5 OH}：n_{H2 O}=1：0.03：1.3：0.89、晶化时间48 h、晶化温度180℃时,制备了厚度约为200 nm的连续致密的b轴取向MFI沸石膜,与基于四丙基氢氧化铵（TPAOH）的常规合成溶液水热二次生长制备的MFI沸石膜相比,厚度降低了90%,并且保持了晶种层的b轴取向性。     

"一步法"合成多级孔SAPO-34分子筛

以TPOAC和硅溶胶为硅源,合成了多级孔SAPO-34分子筛,总比表面积达到649 m²·g^-1。详细考察了TPOAC和硅溶胶的配比对多级孔SAPO-34外比表面的影响,通过XRD、BET、SEM、NH₃-TPD等对其结构进行表征,结果表明多级孔SAPO-34的外比表面积可调变,晶体外观有较多缺陷位置,弱酸量减少,强酸位有变弱的趋势。在TPOAC与硅溶胶的投料比为3:2,晶化时间为10 d,投料比为n_Al2O3:n_P2O5:n_Si:n_TEAOH:n_H2O=1:0.9:0.5:2:60时,合成的多级孔SAPO-34的外比表面积达到最大,为100 m²·g^-1。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.