烯唑醇铜和银配合物的水热合成与晶体结构(英文)

合成了2个新的烯唑醇铜和银配合物:[CuL4Cl2](1),[AgL2]NO3(2)(L=diniconazole)。通过元素分析、红外光谱和X-ray单晶衍射对其结构进行了表征。结构分析表明,1属三斜晶系,P1空间群,晶胞参数为a=0.882 3(7)nm,b=1.370 5(10)nm,c=1.516 4(11)nm,α=91.507(11)°,β=97.356(9)°,γ=107.683(9)°。2属单斜晶系,P21/c空间群,晶胞参数为a=1.229 2(3)nm,b=1.272 1(3)nm,c=2.431 7(5)nm,β=98.694(3)°。1和2都由分子间氢键连接成一维链结构。     

铜配合物[CuL2(ClO4)2]的合成、晶体结构及热稳定性(L=3-对溴苯基-4-对甲苯基-5-(2-吡啶基)-1，2，4-三氮唑)

以3-对溴苯基-4-对甲苯基-5-(2-吡啶基)-1,2,4-三氮唑(L)作为配体,合成了1个铜配合物trans-[CuL2(ClO4)2],对其进行了红外、电喷雾质谱、热重分析和单晶结构表征,该配合物属于三斜晶系,空间群P1,a=0.829 29(15)nm,b=0.854 48(16)nm,c=1.502 7(3)nm,α=83.517(2)°,β=89.200(2)°,γ=73.064(2)°,V=1.011 9(3)nm3,Z=1,R1=0.041 2。单晶结构表明,铜离子处于1个扭曲的八面体配位环境中,2个高氯酸根离子呈反式配位,每个配体L通过三氮唑上的1个氮原子和吡啶氮原子参与配位。热重分析表明该配合物在310℃开始发生分解。     

四(1-烯丙基咪唑)二异硫氰酸镍的合成、结构及电化学性能研究

合成了配合物Ni(Aim)4(SCN)2(Aim=1-烯丙基-1H-咪唑),并采用X射线单晶衍射仪测定了其晶体结构。配合物属三斜晶系,P1空间群,晶胞参数为:a=0.883 90(18)nm,b=0.953 90(19)nm,c=1.051 5(2)nm,α=70.22(3)°,β=65.29(3)°,γ=86.66(3)°,V=0.754 3(3)nm3,Z=2。在配合物中,每个Ni(Ⅱ)原子分别和来自4个Aim配体的4个氮原子、2个异硫氰酸根的2个氮原子配位,形成八面体配位结构。在晶体中,分子通过C-H…N分子间弱相互作用沿a轴形成一维锯齿结构。电化学研究显示配合物中Ni2+/Ni对的氧化还原是一个准可逆过程。     

基于酰腙和菲咯啉配体的镉、铜配合物的水热合成、晶体结构和性质

合成了一种酰腙类[ONO]三齿Schiff碱5-溴水杨醛缩噻吩-2-甲酰腙(H_2Brsth),并以菲咯啉(Phen)为第二配体通过水热反应制备了两种金属配合物[Cd_2(μ-Brsth)_2(Phen)_2](1)和[Cu(Brsth)(Phen)](2),经元素分析、红外光谱、紫外光谱、荧光光谱、热重分析和X射线单晶衍射分析对它们进行了表征。1的晶体属单斜晶系,C2/c空间群,晶胞参数a=2.116 36(13)nm,b=1.163 35(7)nm,c=1.872 43(12)nm,β=100.981(2)°,V=4.525 6(5)nm~3,Z=4;2的晶体属三斜晶系,P1空间群,晶胞参数a=0.911 7(2)nm,b=1.089 4(3)nm,c=1.272 9(3)nm,α=64.923(4)°,β=82.006(5)°,γ=67.768(5)°,V=1.059 6(5)nm~3,Z=2。1是一种双核配合物,Cd髤的配位环境为畸变的八体构型;2是一种单核配合物,Cu髤则处于四方锥配位环境。配合物1在443 nm激发光作用下可发射很强的绿色荧光,最大发射波长525 nm,而配体的荧光发射峰则位于475 nm。     

一维链状配位聚合物{[Cu(μ-H_2L)(L)Cl](ClO_4)_3}_∞的合成、结构及磁性研究(L=N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)

设计合成了一个新型吡啶基二氮环配体L(N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)及其铜配位聚合物{[Cu(滋-H2L)(L)Cl](ClO4)3}∞(1),研究了此配合物的晶体结构、光谱及磁性质。该配合物属正交晶系,Pnma空间群,晶胞参数为a=3.5170(17)nm,b=1.0440(5)nm,c=1.1966(6)nm,V=4.394(4)nm3,Z=4。配体L以顺式螯合和反式桥联两种不同的配位形式将铜离子连接起来形成一维链状阳离子结构。     

镓的席夫碱配合物的合成及晶体结构

在无水无氧条件下,合成了3个镓的席夫碱配合物GaCl3(C13H11NO)(1)、GaCl3(C14H13NO2)(2)和GaCl3(C13H9ClNO)(3),对它们进行了元素分析、核磁共振、红外光谱等表征,并用X射线衍射测定了配合物的单晶结构。各配合物配位方式均为配体中酚羟基氧原子与中心镓原子配位,在空间上形成畸变的四面体结构。配合物1属于正交晶系,Pnma空间群,晶胞参数:a=1.3295(3)nm,b=0.70115(16)nm,c=1.6164(4)nm,V=1.5068(6)nm3,Z=4,F(000)=744,R1=0.0295,wR2=0.0651。配合物依靠分子间的氢键作用进一步联结成二维网状结构。配合物2属于单斜晶系,P21/n空间群,晶胞参数:a=0.71303(18)nm,b=1.7153(4)nm,c=1.3503(4)nm,β=91.891(5)°,V=1.6507(7)nm3,Z=4,F(000)=808,R1=0.0443,wR2=0.0988。配合物依靠分子间的氢键作用进一步联结成二维网状结构。配合物3属于三斜晶系,P1空间群,晶胞参数:a=0.6986(2)nm,b=1.0449(4)nm,c=1.1369(3)nm,α=78.58(3)°,β=81.06(2)°,γ=87.87(3)°,V=0.8036(5)nm3,Z=2,F(000)=402,R1=0.0515,wR2=0.1244。配合物依靠分子间的氢键作用进一步联结成二维网状结构。     

La（Ⅲ）、Nd（Ⅲ）与甜菜碱类衍生物形成的包含（H2O）6分子簇的配合物的晶体结构

利用配体1,5-二(3-羧基吡啶基)-N-甲基二乙胺(L)合成2种稀土金属配合物{[La2L4(H2O)2](ClO4)6·6H2O}n(1)和[Nd2L4(DMF)6(H2O)2]2(ClO4)6·4H2O(2)。用红外光谱和X-射线单晶衍射表征配合物的晶体结构。结构分析表明:配合物1属于三斜晶系,P1空间群,其晶胞参数为a=1.496 6(3)nm,b=1.559 7(4)nm,c=1.956 8(4)nm,α=86.776(6)°,β=77.723(7)°,γ=87.168(7)°,Z=2。在配合物1中,一对La髥原子被2个羧基桥联,形成双核结构;双核结构进一步被羧基连接,从而形成平行于c轴的一维链。值得注意的是配合物1的晶体结构中包含着由氢键连接的6个H2O分子组成的水分子簇。配合物2属于三斜晶系,P1空间群,晶胞参数为a=1.040 8(4)nm,b=1.354 1(5)nm,c=2.975(1)nm,α=94.390(8)°,β=91.720(7)°,γ=95.230(4)°,Z=2。配合物2中4个羧基连接一对Nd髥原子,形成四轮状结构,其中2个羧基采取syn-syn双原子桥联模式,而其余2个羧基则采取单原子桥联模式。     

二烷基二硫代氨基甲酸砷(Ⅲ)、铋(Ⅲ)配合物的合成、晶体结构及抑菌活性

合成了二丁基二硫代氨基甲酸砷[(C9H18NS2)3As(Ⅲ)](1)和二甲基二硫代氨基甲酸铋[(C3H6NS2)3Bi(Ⅲ)](2)两种配合物。通过元素分析、红外光谱、1H NMR、热重对其进行表征,并用X-射线单晶衍射测定了晶体结构。配合物1属于三斜晶系,P 1-空间群,晶胞参数为:a=1.075 0(15)nm,b=1.2143(16)nm,c=1.621(3)nm,α=69.15(2)°,β=75.36(3)°,γ=88.17(2)°,Z=2,V=1.910(5)nm3,Dc=1.197 g.cm-3;配合物2也属于三斜晶系,P 1-空间群,晶胞参数为:a=0.992 9(3)nm,b=0.993 0(3)nm,c=1.142 7(3)nm,α=64.495(4)°,β=80.400(4)°,γ=64.772(4)°,Z=2,V=0.914 7(4)nm3,Dc=2.068 g.cm-3。配合物1中的As(Ⅲ)与来自3个配体中的6个硫原子配位,形成6配位畸变八面体构型;配合物2则形成6配位畸变五角锥构型,其分子之间又通过Bi···S弱相互作用构成二聚体结构。利用琼脂扩散法测试了配合物的抑菌活性,结果表明配合物1对5种受试菌株具有较强的抑菌活性,配合物2则仅有弱的抑菌性。     

La(Ⅲ)、Nd(Ⅲ)与甜菜碱类衍生物形成的包含(H_2O)_6分子簇的配合物的晶体结构（英文）

利用配体1,5-二(3-羧基吡啶基)-N-甲基二乙胺(L)合成2种稀土金属配合物{[La2L4(H2O)2](ClO4)6·6H2O}n(1)和[Nd2L4(DMF)6(H2O)2]2(ClO4)6·4H2O(2)。用红外光谱和X-射线单晶衍射表征配合物的晶体结构。结构分析表明:配合物1属于三斜晶系,P1空间群,其晶胞参数为a=1.496 6(3)nm,b=1.559 7(4)nm,c=1.956 8(4)nm,α=86.776(6)°,β=77.723(7)°,γ=87.168(7)°,Z=2。在配合物1中,一对La髥原子被2个羧基桥联,形成双核结构;双核结构进一步被羧基连接,从而形成平行于c轴的一维链。值得注意的是配合物1的晶体结构中包含着由氢键连接的6个H2O分子组成的水分子簇。配合物2属于三斜晶系,P1空间群,晶胞参数为a=1.040 8(4)nm,b=1.354 1(5)nm,c=2.975(1)nm,α=94.390(8)°,β=91.720(7)°,γ=95.230(4)°,Z=2。配合物2中4个羧基连接一对Nd髥原子,形成四轮状结构,其中2个羧基采取syn-syn双原子桥联模式,而其余2个羧基则采取单原子桥联模式。     

过渡金属-4, 4'-联吡啶配合物的合成及其晶体结构

由过渡金属与4,4'-联吡啶反应,得到两种新型配合物[Zn(4,4'-bpy)~2(H~2O)~2](pic)~2·(4,4'-bpy)·(H~2O)(1)与[Cu(4,4'-bpy)(pic)~2](2)(4,4'bpy:4,4'-联吡啶,pic^-:苦味酸根),进行了元素分析、红外光谱、X射线衍射等表征。X射线衍射结果表明,晶体1属单斜晶系,空间群为C~c,晶胞参数为：a=2.2716(2)nm,b=1.6191(3)nm,c=1.6166(2)nm,β=131.085(7)°,V=4.481(2)nm^3,Z=4;该配合物由4,4'-联吡啶与金属配位形成多孔的二维网,二维网再由未配位的4,4'-联吡啶通过氢键作用沿a方向堆积得三维网状结构,未配位的4,4'-联吡啶、水、苦味酸根离子就被包含在这种网络之中,展示出一定的包合现象,晶体2属三斜晶系,空间群为P1,晶胞参数为：a=0.6100(2)nm,b=1.0186(3)nm,c=1.1046(2)nm,α=107.230(10)°,β=101.992(2)°,γ=97.87(7)°,V=0.6266(3)nm^3,Z=1。在该配合物中,4,4'-联吡啶分子、苦味酸根离子均与铜离子配位,形成一维链状结构。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.