通过β-FeOOH纳米棒无序聚集制备α-Fe2O3中空球

The α-Fe₂O₃ hollow spheres have been synthesized through the random aggregation of β-FeOOH nanorods in the C₂H₅OH/H₂O system. The phase transformation and the morphologies of the α-Fe₂O₃ hollow structure were investigated with XRD， SEM， TEM and selected area electron diffraction (SAED). These studies indicate that the second step is a dissolution-recrystallization process. Furthermore， the formation mechanism of the hollow spheres has been discussed. It is found that the presence of H₂O in the reaction system is essential to the final formation of the hollow spheres.     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

磁性Fe3O4 /壳聚糖的化学修饰及包覆机理研究

Nano-sized Fe₃O₄ powder was prepared through an Oxygenation-Hydrothermal method. The chitosan magnetic complex was prepared by coating chitosan on the surface of Fe₃O₄ powders through Microlatex-Crosslinking Method. The product was characterized by IR， XRD， TEM， Vibrating Sample Magnetometer (VSM)， TG methods. Results show that the as-prepared powder is 25 nm in size and shows supermagnetism. The content of magnetite in microspheres is 37.8%. The mechanism for the coating reaction of chitosan to Fe₃O₄ nanoparticles is also suggested.     

预氧化固气法合成LiNiO2的研究

LiNiO₂ was prepared by reaction of stoichiometric amounts of thoroughly-mixed LiOH·H₂O and preoxidation nanometer-scale Ni₃O₂(OH)₄ powders in O₂ at the temperature of 700℃ for 6h. The products were tested by XRD， XPS， SEM and electrochemistry methods. It was shown that product was LiNiO₂ single-phase， and the valence of nickel was +3; the average size of it was 40nm; its initial charge specific capacity is 168mAh·g^-1 and the coulomb efficiency is 90%; the second charge specific capacity is 160mAh·g^-1 and the coulomb efficiency is 96%.     

准球形α-Fe2O3的形成过程研究

The formation process of pseudo-spherical α-Fe₂O₃ particles obtained through the hydrolysis of 0.01 mol·L^-1 FeCl₃ solution was studied by means of TEM and XRD. The results show that the growth of α-Fe₂O₃ nuclies is through the diffusion mechanism. Although the presence of CTAB in the FeCl₃ solution has no effect on the growth process of pseudo-spheric α-Fe₂O₃ particles, more uniform particles are obtained, and the particles are self-assembled to form two-dimensional ordered structure due to the effect of CTAB. The optical character of these α-Fe₂O₃ particles was investigated, and the band-gap of which is about 2.49 eV.     

CuO/Sn0.8Ti0.2O2催化剂的表征及对NO+CO反应活性研究

Reducibility and characteristics of CuO/Sn_0.8Ti_0.2O₂ catalysts were examined by using a microreactor-GC NO+CO reaction system, BET, TG-DTA, FTIR, XRD and H2-TPR techniques. CuO/Sn_0.8Ti_0.2O₂ had high activity in NO+CO reaction, showing 93% NO conversion at 300 ℃ in air, and 100% NO conversion at 225 ℃ after H₂ pretreatment. The pore size distribution of Sn_0.8Ti_0.2O₂ was mainly as micro-pores and meso-pores (1~5 nm), and the specific surface area and total pore volume of Sn_0.8Ti_0.2O₂ were 69 m²·g^-1 and 0.15 cm³·g^-1, respectively. As shown by XRD analysis, there was no CuO crystal diffraction peak at 9%CuO loading, but two CuO crystal diffraction peaks at 2θ 35.5° and 38.7° were present at 12% CuO loading. FTIR detected the adsorption of NO and CO on the surface of reduced 12%CuO/Sn_0.8Ti_0.2O₂. The Cu²⁺ sites and support surface adsorbed NO, and the process of NO adsorption led to the formation of N₂O and NO₃^-. In contrast, the Cu⁺、Cu⁰ sites and support surface adsorbed CO, and when the mixed gases of NO and CO were adsorbed by support surface, no NO₃^- was formed. H₂-TPR showed four reduction peaks (α, β, γ and δ). The α, β and γ peaks were the reductions of CuO species, and the δ peak was the reduction of Sn_0.8Ti_0.2O₂.     

纳米MgNb2O6微波介质陶瓷粉体制备及表征

Nano-crystalline MgNb₂O₆ was prepared using Mg(NO₃)₂·6H₂O, Nb₂O₅, HF and citric acid as raw materials by auto-ignition route. The process involves the formation of a viscous gel by thermal dehydration of the citrate-nitrate solution at about 80 ℃. The auto-ignition (at about 200 ℃) of the gel resulted in a high reactivity powder containing intimate blending of MgNbF₇ and NbF₃. The crystalline phase of MgNb₂O₆ could be formed easily at 700 ℃, which is 400 ℃ lower than that of common solid-state reaction process. The nano-crystalline MgNb₂O₆ (～30 nm) powder with good dispersity could be obtained at 850 ℃.     

Nd2O3添加量对BaTiO3陶瓷介电性能的影响

BaTiO₃ ceramics doped with Nd₂O₃(the additive content was respectively 0.001,0.002,0.003,0.005,0.01,0.03mol)were prepared by Sol-Gel method. Effects of Nd₂O₃ contents on the dielectric constant (ε), the dielectric loss (tanδ) ,the Curie-temperature (T_C) and the resistivity (ρ) of BaTiO₃ ceramic were studied. When Nd₂O₃ content was 0.001mol and 0.002mol, the dielectric constant was increased obviously, but the dielectric loss was also increased. When Nd₂O₃ content was 0.003mol, the dielectric constant was increased, and the dielectric loss was decreased, which was suitable for application in condenser. The resistivity was decreased obviously with the increasing of Nd₂O₃ contents, the resistivity was the smallest when Nd₂O₃ content was 0.001mol. The Curie-temperature was also decreased with the increasing of Nd₂O₃ contents.     

无机-高分子-无机多组分核壳纳米复合材料的制备和表征

Fe₃O₄ nanoparticles were prepared by chemical co-precipitation using palmitic acid as surfactant， then a uniformly dispersed system of Fe₃O₄@Polymethylmethacrylates(PMMA) core-shell structure was obtained. Furtherm-ore， polymethylmethacrylates(PNIPAM) was encapsulated on the surface of the Fe₃O₄@PMMA core-shell nano-structure to get Fe₃O₄@PMMA@PNIPAM double shell-core composite structure. After that， the Ag nano-particles were assembled on the surface of Fe₃O₄@PMMA@PNIPAM taking advantage of coordination reaction between Ag⁺ and nitrogen atom on the amide group of PNIPAM. The magnetism of composites is convenient for the catalyst separation from the solution.     

反应性模板法合成硫化银中空球-银纳米粒子异质结构

以Cu₂S中空球为反应性模板, 通过在水溶液中与银离子的阳离子交换和氧化还原反应制备了大小均匀的Ag₂S中空球-Ag纳米粒子异质结构, 即Ag₂S-Ag异质中空球. 该异质结构中每个Ag₂S中空球的直径约为600 nm, 壁厚约20–30 nm, 其表面均附着一个Ag纳米粒子. 采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和能量色散X射线谱(EDS)对所得Ag₂S-Ag异质中空球的结构和组成进行了表征. 若以CuS中空球为反应性模板, 在相似转化条件下则主要得到不含Ag粒子的Ag₂S中空球. 该结果表明, Cu₂S中的Cu(I)的还原性在Ag₂S-Ag异质中空球的形成中发挥了重要作用. 通过对所制备的Ag₂S-Ag异质中空球进行二次生长, 还可以得到Ag₂S中空球的半球表面均被Ag膜所包覆的Ag₂S-Ag异质中空球.     

Synthesis of hierarchical Ag(2)ZnGeO(4) hollow spheres for enhanced photocatalytic property

An Ag(2)ZnGeO(4) photocatalyst was fabricated by ion-exchange reaction between amorphous Zn(2)GeO(4) suspension and Ag(+) solutions. The Ostwald ripening effect induced the formation of hierarchical hollow spheres. Compared with the reference bulk Ag(2)ZnGeO(4), the hierarchical Ag(2)ZnGeO(4) hollow spheres showed enhanced photocatalytic activity.     

Co3O4空心球的简易合成及其电化学性能

通过简易的水热法"一锅"制备了Co3O4空心球。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱法(FTIR)等对Co3O4的结构和形貌进行了表征。结果表明,产物由Co3O4纳米粒子构成,并形成明显的空心多孔结构。循环伏安法(CV)测试表明,所制得的Co3O4空心球呈现良好的电化学性能。本文同时对Co3O4空心球结构的形成过程和可能的机理进行了分析和讨论。     

高活性Ag修饰TiO2空心八面体光催化剂的简易模板诱导合成

贵金属修饰的TiO2空心纳米光催化材料由于具有大的比表面积、低的质量密度、良好的表面渗透性、强的光吸收能力以及界面电荷的快速转移,因而表现出优异的光催化性能.为了制备结构可控且精良的贵金属修饰TiO2空心纳米光催化材料,人们先后采用湿化学法、高温固相法、声化学法及光化学沉积法等.由于在制备过程中涉及多种异相材料的合成和结构控制,因此上述合成方法通常需要复杂且多步过程(有些过程甚至很容易导致结构破坏),从而限制了其在光催化领域的实际应用.本文开发了一种简单的模板诱导法,成功制备了Ag纳米粒子修饰的TiO2空心八面体光催化剂.合成过程包括模板指导沉积和原位模板溶解.以Ag2O八面体为模板, TiF4水溶液为前驱体,首先通过TiF4水解形成TiO2纳米粒子沉积在Ag2O模板表面,而TiF4水解产生的酸性HF水溶液可原位溶解碱性的Ag2O模板,从而一步制得TiO2空心八面体.同时,利用Ag2O以及Ag+离子的光敏特性,在光照条件下使Ag2O和Ag+离子生成Ag纳米颗粒,直接沉积在TiO2空心八面体的内外表面,得到Ag/TiO2光催化剂.由此可见,该合成方法具有明显的步骤少的优点.扫描电镜、透射电镜、能量散射和紫外-可见光谱等表征结果表明成功制得内外Ag纳米粒子修饰的TiO2空心八面体光催化剂,其中TiO2空心八面体的壁厚约为25 nm,边长约为1μm,而修饰在其表面的Ag纳米粒子尺寸仅为5–10 nm.此外,通过控制TiF4前驱体浓度,还可制备核壳结构的Ag2O@TiO2八面体以及不同壁厚Ag修饰的TiO2空心八面体,表明该方法在Ag/TiO2形貌合成上的多样性和可控性.为了获得良好的光催化活性,对制备的Ag纳米粒子修饰的TiO2空心八面体光催化剂进行了不同温度的热处理. X射线衍射结果表明,即使在600 oC高温下,制备的Ag/TiO2空心八面体光催化剂依然能够保持原有的特殊形貌和锐钛矿TiO2晶型.该温度明显高于TiO2从锐钛矿向金红石转变的温度.这说明合成的Ag/TiO2能在保持高活性锐钛矿相的同时获得更好的结晶性.这可能是由于分散在TiO2原始晶粒周围的Ag纳米粒子能阻止其进一步长大,从而抑制了其晶型转变.不同样品光催化降解甲基橙的结果表明,经600oC高温热处理的样品表现出最高的光催化活性,相应的反应速率常数为0.11 min？1.这应得益于该光催化剂具有以下三个特点：(1) TiO2空心八面体的薄壁结构能够缩短光照条件下光生电子和空穴从内部扩散到表面的距离;(2)由于贵金属Ag纳米粒子沉积在TiO2薄壁的内外两个表面以及TiO2和Ag形成肖脱基势垒,因此在它们接触的界面上能够发生更快的界面电荷转移;(3)高温处理导致TiO2良好的晶化以及高活性锐钛矿TiO2晶型的保持.     

空心介孔WO3球的制备及光催化性能

采用喷雾干燥法制备中空偏钨酸铵球,通过调整热处理温度制备空心介孔WO3球。结果表明:具有Keggin结构的[H2W12O40]6-金属簇的破坏温度区间为417~439℃;在热处理温度为500、550℃,仍有少量的铵根和结合水没有分解,除了WO3外,还存在(NH4)0.06WO3(H2O)0.11;当热处理温度在600℃以上时,偏钨酸铵完全分解为WO3;热处理温度为700℃,保温时间为2h,得到空心介孔WO3球。其形成机理为:空心的偏钨酸铵球,在热处理过程中由于各亚晶的位向不一致,各亚晶沿着[002]晶向择优生长,亚晶形成狭长颗粒,从而在空心球表面形成了介孔;但当热处理温度为800℃,保温时间为2 h,晶粒与晶粒之间通过合并而长大,孔道也随之消失;空心介孔WO3球具有良好的光催化效果,500 W高压汞灯照射150 min甲基蓝的降解率为65.9%。     

Controlled synthesis of magnetic Pd/Fe3O4 spheres via an ethylenediamine-assisted route

A simple route based on time-dependent growth was employed to synthesize solid and hollow spheres of Pd/Fe(3)O(4) nanocomposite. Transmission electron microscopic (TEM) imaging shows that the spheres are composed of nanocrystals with the solid spheres having a diameter of 533 nm whereas the hollow ones having a diameter of 520 nm and a shell thickness of 100 nm. An assembly-then-growth mechanism for the formation of the magnetic Pd/Fe(3)O(4) nanocomposite has also been elucidated on the basis of the experimental observations. It is demonstrated that the Pd/Fe(3)O(4) nanocomposite functions as a heterogeneous catalyst for the hydrogenation reaction of p-nitrophenol at room temperature under atmospheric pressure. Both the solid and hollow spheres possess unique magnetic properties so that they may be conveniently separated and recovered by a magnet after the catalytic reaction.     

Cu2O亚微米空心球的低共熔溶剂辅助合成与表征

以低共熔溶剂(DESs)/H2O混合溶剂为介质成功制备了形貌均一、尺寸小且稳定性高的亚微米Cu2O空心球。采用扫描电镜、透射电镜和X射线衍射等方法表征了所制备样品的形貌、尺寸和结构。同时,研究了温度、p H、聚乙烯吡咯烷酮(PVP)用量等因素对样品尺寸、形貌及纯度的影响。结果表明,制备高纯Cu2O空心球的优化工艺条件为40℃、p H=11和PVP用量0.9g。混合溶剂中DESs的存在对提高所制备Cu2O样品的纯度、形态均一性和稳定性以及缩小颗粒的尺寸起到了重要作用。     

Preparation and Characterization of Cu3V2O7(OH)2·2H2O Hollow Spheres from NazV6O16·3HzO Nanobelts

Monoclinic Cu3V2O7(OH)2·2H2O(copper polyvanadate) hollow spheres were prepared with Na2V6O16·3H2O nanobelts as V-precursor by hydrothermal method.The purity and structure of the products were characterized by X-ray powder diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,Raman spectroscopy,thermogravimetric analysis(TGA) and X-ray photoelecton spectroscopy(XPS).The morphology and size were observed by scanning electron microscopy(SEM).We found that the Kagomé staircase-structural copper polyvanadate hollow spheres with an average diameter of 7 μm could be easily synthesized via the reaction of Na2V6O16·3H2O nanobelts with sufficient copper sulfate.The dielectric property of the copper polyvanadate demonstrates that dielectric loss hardly changes when the frequency of applied electric field is higher than 100 kHz.The formation process of the hollow spheres is discussed in detail by the observation of a series of products prepared for different reaction time.     

Synthesis and Photoluminescence Properties of Uniform Y2O3:Eu3+ Hollow Spheres with Tunable Shell Thickness

Y2O3:Eu3+ hollow spheres were successfully prepared with melamine formaldehyde(MF) spheres as template. The MF spheres played a significant role in directing the formation of the hollow shells which are composed of numerous primary nanoparticles. Furthermore, the shell thickness of these hollow spheres could be readily tailored by adjusting the dosage of MF template. Based on the photoluminescence(PL) investigation, the red emission intensities(613 nm) of these Y2O3:Eu3+ hollow spheres are greatly influenced by their shell thickness and it was found that hollow spheres with thin shell thickness and intact hollow structures permit a better PL performance.     

Degradation of methylene blue in aqueous dispersion of hollow titania photocatalyst: study of reaction enhancement by various electron scavengers

Submicrometer-sized titania hollow spheres have been synthesized by employing sulfonated polystyrene latex particles (averaged diameter: 200 nm) as a template in conjunction with the sol-gel method. Utilization of 0.20 mol/L titanium tetrabutoxide and 25 g/L latex led to the formation of anatase particles having shell thickness of about 15 nm and void diameter of about 150 nm. Photocatalytic activity of the titania hollow spheres was examined by focusing on its enhancement by electron scavengers in the photocatalytic decomposition of methylene blue (MB). The electron scavengers employed were inorganic oxidants such as ClO*3, BrO*3, IO*4, H2O2, and S2O2*8. Differences in electronegativity, atomic radius of the halogens, and the number of highly reactive radical and nonradical intermediates were proven to be important criteria for an electron scavenger to yield high efficiency in the MB photodecomposition. Based on the results, the effect of the oxidants used were found to be in the order of S2O2*8 > IO*4 > BrO*3 > H2O2 > ClO*3.