溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

溶剂热方法合成Cu2ZnSnS4空心球

以氯化亚铜,硝酸锌,氯化锡和硫脲作为反应前驱体,聚乙二醇作为模板,利用溶剂热方法合成Cu₂ZnSnS₄中空球。其中,聚乙二醇对于产物的最终形成起到关键作用。文章讨论了Cu₂ZnSnS₄中空球的生长机制,并通过X射线衍射(XRD)、拉曼光谱、场发射电子显微镜(FESEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线光电子谱(XPS)、选区电子衍射谱(SAED)和紫外-可见光分光光度计(UV-Vis)等技术对样品的微结构以及光学性质进行了表征和分析。结果显示Cu₂ZnSnS₄中空球为四方晶体,尺寸为600 nm。其禁带宽度为1.52 eV,适用于制作光伏器件。     

Cu2O立方体的快速制备及模板法制备CuxS纳米笼子

首先以NaBH₄作为强还原剂在CuSO₄溶液中快速形成Cu₂O晶核, 然后以葡萄糖为温和的还原剂和保护剂, 由晶核生长成Cu₂O立方体, 并以其为模板制备中空的球状Cu_xS纳米笼子. 利用透射电子显微镜(TEM), 扫描电子显微镜(SEM), X射线衍射仪(XRD)和紫外-可见(UV-Vis)分光光度计对产物进行表征. 葡萄糖和铜盐的物质的量的比、加热状况、pH等反应条件影响Cu₂O的形貌. Cu_xS纳米笼子的外壳厚度由参与反应的Cu₂O和Na₂S的物质的量的比决定.     

室温下制备Cu7S4和Ag2S的球形空心纳米粒子

以Cu₂O和Ag₂O纳米粒子为前驱体,利用Kirkendall效应,在室温条件下制备出Cu₇S₄和Ag₂S的球形空心纳米粒子。用X-射线衍射(XRD)、透射电镜(TEM)、扫描电镜(SEM)等测试手段对产物进行了表征。结果表明,粒子的空心化程度取决于反应物的物质的量之比;空心粒子的形貌与前驱体粒子的形貌很相似。研究了这种反应的机理,并对这两种氧化物发生这类反应的难易程度作了理论探讨。     

Ag掺杂型空心TiO2纳米微球的制备与表征及其光催化性能

通过甲基丙烯酸与苯乙烯的乳液聚合制备了表面载有阴离子的聚苯乙烯(PSt)纳米乳胶粒. 在乙醇与水的混合溶剂中, 用硅烷偶联剂乙烯基三甲氧基硅烷对其进行表面改性. 以此乳胶粒为模板, 加入钛酸四丁酯和硝酸银制备了Ag₂O掺杂型聚苯乙烯/二氧化钛(PSt/TiO₂)复合微球. 对该微球在180 °C进行液相预处理、干燥、500 °C煅烧等步骤制备了Ag 掺杂型Ag-TiO₂复合粒子. 通过扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)等手段对PSt/TiO₂复合粒子及Ag-TiO₂空心粒子的形貌及晶体结构等进行了表征. 考察了Ag-TiO₂复合粒子在紫外光(365 nm)与紫外-可见光(370-760 nm)下对罗丹明B (RhB)降解的催化活性. 结果表明, 与不含银的TiO₂空心微球相比, 在紫外光照射下, 银含量(n_Ag/n_Ti)为0.1%的Ag-TiO₂复合粒子对RhB的降解率提高了11%左右; 在紫外-可见光照射下, n_Ag/n_Ti为1.0%和2.0% 的Ag-TiO₂复合粒子对RhB的降解率提高了30%左右.     

单分散SnO2中空微纳米球的制备和性质

模板法是制备无机中空微纳米球的重要方法之一. 本文以苯乙烯为单体, 通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球. 以磺化后的聚苯乙烯(PSS)微球为模板, 利用阴阳离子静电吸附作用, 将PSS与前驱体SnSO₄中的Sn²⁺结合. 通过Sn²⁺在乙醇-水介质中的水解作用得到核-壳复合结构, 再经高温煅烧, 得到SnO₂中空微纳米球. 实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X 射线衍射(XRD)、红外(IR) 光谱、热重分析(TGA)、H₂ 程序升温还原(H₂-TPR)、Brunauer-Emmett-Teller (BET)比表面积等技术深入探究SnO₂中空微纳米球的结构, 并对比中空SnO₂与实心粒子的氧化还原特性. BET和H₂-TPR显示将SnO₂制备成微纳米空心球后其比表面积增大, 表面氧空位明显增多, 氧化活性明显提高. 从IR 及XRD推断核-壳结构形成机理, 进而优化出简单合理的实验方案, 获得表面光滑、结构致密, 包覆厚度可控的SnO₂中空微纳米球.     

pH值调节方式对LAB辅助合成纳米Cu2O微球的影响与组装机理

以Cu(Ac)₂为原料,两性表面活性剂月桂酰胺丙基甜菜碱(LAB)为模板,采用两种不同的调节pH值方式制备了Cu₂O纳米材料.表征结果表明两种调节pH值方式均可获得Cu₂O纳米微球,并都呈立方晶相,而且样品的红外吸收峰、固体紫外吸收峰都不同程度的发生了蓝移;第一种Cu₂O纳米微球由针状纳米粒子积聚而成,针状纳米粒子间空隙孔径主要分布在25~50 nm之间,比表面积为22 m²·g^-1,禁带宽度为2.15 eV;第二种Cu₂O纳米微球由小的纳米球状体堆积而成,球状体间孔道直径集中在25~50 nm和50~125 nm两个区域,比表面积为9 m²·g^-1,禁带宽度为2.46 eV.两种不同的调节pH值方式获得的Cu₂O纳米微球,其反应历程和自组装机理存在不同.     

Ag/Ag3PO4/g-C3N4三元复合光催化剂的制备及其可见光驱动下的光催化活性增强

报道了一种新型Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂的制备及其半导体界面处的快速载流子分离所引起的光催化活性的显著增强效应。通过X射线衍射,扫描电子显微镜,紫外-可见吸收光谱以及光致发光光谱等就其晶体结构、形貌、组分、光学吸收以及载流子的快速分离行为进行了表征与分析。以罗丹明B作为模型化合物分子,研究发现,所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂在可见光照射下表现出比Ag₃PO₄以及Ag₃PO₄/g-C₃N₄二元催化剂更为优异的光催化活性。研究认为,Ag₃PO₄表面尺寸约为40 nm的Ag纳米粒子在可见光下受激所产生的等离子表面共振效应以及Ag₃PO₄与g-C₃N₄界面处所形成的类似异质结结构对所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂光催化活性的显著增强起到重要作用。     

CuO/Cu2(OH)2CO3梭型中空颗粒的制备及其气敏性能

以Cu₂(OH)₃NO₃为前驱体,采用无模板溶剂热法成功合成了大小为1~2 μm的CuO/Cu₂(OH)₂CO₃中空梭型微粒.高倍电镜显示其外壳层由高度弥散的CuO和Cu₂(OH)₂CO₃纳米颗粒组成.通过控制反应时间证明了该中空梭型粒子的形成过程是由自组装和奥斯特瓦尔德熟化过程控制.该纳米材料的特殊结构使其对乙醇、丙酮等有机气体有良好的气敏性能.     

Z型Ag-Cu2O/BiVO4光催化剂的光催化还原CO2性能

利用简单的化学还原沉积法将 Cu₂O纳米球和 Ag纳米颗粒均匀包裹在十面体 BiVO₄表面,成功构建了一种具有高效电荷载流子分离/转移特性的Z型异质结光催化剂Ag-Cu₂O/BiVO₄。Ag-Cu₂O/BiVO₄在可见光下光催化CO₂还原为CO的产率可达5.37 μmol·g^-1·h^-1,分别是纯 BiVO₄和 Cu₂O的 35.80倍和 6.30倍。通过 X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线能谱(EDS)、紫外可见漫反射光谱(UV-Vis DRS)、光致发光(PL)光谱、瞬态光电流响应(TPC)和电化学阻抗谱(EIS)对 Ag-Cu₂O/BiVO₄的晶体结构、形貌、组成、能带结构和吸光能力等进行了系统表征分析,并提出了其光催化体系还原CO₂的催化机理。     

Investigation of the interaction between cobalt sulfide coatings and Ag(I) ions using cyclic voltammetry in KClO4 and NaOH aqueous solutions and X-ray photoelectron spectroscopy

Cobalt sulfide coatings have been investigated by means of cyclic voltammetry in 0.1 M KClO₄ and 0.1 M NaOH solutions and analyzed using X-ray photoelectron spectroscopy. They have been shown to contain CoS(OH), CoS and Co(OH)₂. After treating such Co sulfide coatings with AgNO₃ solution, their composition changes: both the cobalt and oxygen content decreases and Ag (up to 85 at%) appears in the coating as Ag₂S, Ag₂O and metallic Ag. Co(II) compounds react with Ag⁺ ions according to an exchange reaction [CoS+2Ag⁺+2H₂O→Ag₂S+Co(OH)₂+2H⁺]. In the course of the reaction of Co(OH)₂ with silver ions, a redox process occurs, giving metallic silver [Co(OH)₂+Ag⁺+H₂O→Ag°+Co(OH)₃+H⁺ or Co(OH)₂+Ag⁺→Ag°+CoO(OH)+H⁺]. Ag₂S reduction takes place at more positive potentials than Cu reduction; therefore sulfide layers of cobalt modified with silver ions, unlike unmodified ones, may be plated with Cu from both acid and alkaline electrolytes. Electronic Publication     

Accumulation of Silver(I) Ion and Diamine Silver Complex by <Emphasis Type="Italic">Aeromonas</Emphasis> SH10 biomass

The biomass of Aeromonas SH10 was proven to strongly absorb Ag⁺ and [Ag(NH₃)₂]⁺. The maximum uptake of [Ag(NH₃)₂]⁺ was 0.23 g(Ag) g⁻¹(cell dry weight), higher than that of Ag⁺. Fourier transform infrared spectroscopy spectra analysis indicated that some organic groups, such as amide and ionized carboxyl in the cell wall, played an important role in the process of biosorption. After SH10 cells were suspended in the aqueous solution of [Ag(NH₃)₂]⁺ under 60°C for more than 12 h, [Ag(NH₃)₂]⁺ was reduced to Ag(0), which was demonstrated by the characteristic absorbance peak of elemental silver nanoparticle in UV-VIS spectrum. Scanning electron microscopy and transmission electron microscopy observation showed that nanoparticles were formed on the cell wall after reduction. These particles were then confirmed to be elemental silver crystal by energy dispersive X-ray spectroscopy, X-ray diffraction, and UV-VIS analysis. This study demonstrated the potential use of Aeromonas SH10 in silver-containing wastewater treatment due to its high silver biosorption ability, and the potential application of bioreduction of [Ag(NH₃)₂]⁺ in nanoparticle preparation technology.     

Silver nanowires-copper sulfide core/shell nanostructure for electrochemical supercapacitors

This paper reports the synthesis of a new hybrid core (silver nanowires (AgNWs))/shell (copper sulfide (Cu₂S)) nanostructure using simple and inexpensive drop casting and successive ionic layer adsorption and reaction (SILAR) methods. The effects of the thickness of the Cu₂S shell on the Ag NW core on the electrochemical properties of the nanocomposite were studied by varying the number of SILAR cycles from one to four. The structure and microstructure of the prepared composite nanostructure electrode materials were characterized by X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The AgNW/Cu₂S exhibited a high specific capacitance of 603 Fg^?1 (stainless steel substrate) and 707 Fg^?1 (Ni foam substrate) at a scan rate of 10 mVs^?1 with an energy density of 10.01 Whkg^?1 and 25.33 Whkg^?1 at an applied current of 0.2 mA. This study provides a simple and cost-effective strategy for the fabrication of nanostructured electrodes for supercapacitor applications.     

Preparation of a novel pH-responsive silver nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogel

In this paper, series of novel pH-responsive silver (Ag) nanoparticle/poly(2-hydroxyethyl methacrylate (HEMA)-poly(ethylene glycol) methyl ether methacrylate (PEGMA)-methacrylic acid (MAA)) composite hydrogel were successfully prepared by in situ reducing Ag⁺ ions anchored in the hydrogel by the deprotonized carboxyl acid groups. X-ray diffraction (XRD), UV-vis spectrophotometry, transmission electron microscopy (TEM) and electric conductivity tests were used to characterize the composite system. It was found that the size and morphology of the reduced Ag nanoparticles in the composite hydrogels could be changed by loading the Ag⁺ ions at various swelling ratios of hydrogel. Moreover, compared to the pure poly(HEMA-PEGMA-MAA) hydrogel, not only did the Ag nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogels exhibit much higher swelling ratio and faster deswelling rate, but also higher pH switchable electrical properties upon controlling the interparticle distance under pH stimulus. The pH responsive nanocomposite hydrogel reported here might be a potentially smart material in the range of applications including electronics, biosensors and drug-delivery devices.     

Temperature Influence on the Morphology and Roughness of Silver Deposit Formed by Cementation

The morphology and surface roughness of silver deposits formed by cementation in 0.5M H₂SO₄ solution containing 0.5M CuSO₄ was investigated at various temperatures. The influence of O₂ on the morphology of deposited Ag on the Cu surface was studied in solutions containing 20 or 100 mg/dm³ initial Ag⁺. Surface‐height‐distribution diagrams were calculated from scanning‐electron‐microscopic (SEM) images. For the lower Ag⁺ concentration, the formation of granular deposits occurred in the presence of O₂. In contrast, under anaerobic conditions, rather flat deposits with tiny Ag crystals were observed. For the higher Ag⁺ concentration, the presence of O₂ did not significantly affect the morphology of the Ag deposit, but increasing temperature resulted in more‐compact and denser dendrites. Differences in the Ag‐deposit morphology and surface roughness were attributed to a different mechanism in the absence of O₂. Under anaerobic conditions, a competitive reaction between Ag⁺ and Cu⁺ occurs in bulk solution, which consumes additional Ag⁺ ions. The SEM images and, especially, distribution diagrams of the surface height provided useful information on the formation and expansion of anodic sites on the Cu surface at various temperatures.     

Jingle-bell-shaped ferrite hollow sphere with a noble metal core: Simple synthesis and their magnetic and antibacterial properties

In this paper, a simple strategy is developed for rational fabrication of a class of jingle-bell-shaped hollow structured nanomaterials marked as Ag@MFe₂O₄ (M=Ni, Co, Mg, Zn), consisting of ferrite hollow shells and metal nanoparticle cores, using highly uniform colloidal Ag@C microspheres as template. The final composites were obtained by direct adsorption of metal cations Fe³⁺ and M²⁺ on the surface of the Ag@C spheres followed by calcination process to remove the middle carbon shell and transform the metal ions into pure phase ferrites. The as-prepared composites were characterized by X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis spectroscopy and SQUID magnetometer. The results showed that the composites possess the magnetic property of the ferrite shell and the optical together with antibacterial property of the Ag core.     

Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction

Silver nanoparticles were synthesized by UV irradiation of [Ag(NH₃)₂]⁺ aqueous solution using poly(N-vinyl-2-pyrrolidone) (PVP) as both reducing and stabilizing agents. The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima around 420 nm. It was found that the formation rate of silver nanoparticles from Ag₂O was much quicker than that from AgNO₃, and the absorption intensity increased with PVP concentration as well as irradiation time. The maximum absorption wavelength (λ_max) was blue shift with increasing PVP content until 8 times concentration of [Ag(NH₃)₂]⁺ (wt%). The transmission electron microscopy (TEM) showed the resultant particles were 4–6 nm in size, monodisperse and uniform particle size distribution. X-ray diffraction (XRD) demonstrated that the colloidal nanoparticles were the pure silver. In addition, the silver nanoparticles prepared by the method were stable in aqueous solution over a period of 6 months at room temperature (25 °C).     

Syntheses and structures of [Ag(etu)3]2SO4 and [{Cu(etu)I}3] n (etu = ethylenethiourea): a new μ 3–S coordination mode for etu

[Ag(etu)₃]₂SO₄ (1) and [{Cu(etu)I}₃] _n (2) (etu?=?ethylenethiourea) have been synthesized by reaction of etu with Ag₂SO₄ or CuI and their crystal structures determined. In 1 both crystallographically independent Ag⁺ ions are trigonally coordinated by three monodenate etu ligands. Complex 2 is composed of a one-dimensional polymer assembled by cyclic [Cu(etu)I]₃ trimers. In the [{Cu(etu)I}₃] _n polymer, the chair-type Cu₄S₂I₂ core is formed by μ₃–S bridging etu ligands and this represents a new coordination mode for etu. The Cu⁺ ions have a distorted tetrahedral coordination geometry.     

Photochemical properties of Ag ion clusters included within ZSM-5 zeolites prepared by an ion-exchange method

Photoluminescence investigations of the Ag ion-exchanged ZSM-5 (Ag⁺ /ZSM-5) zeolite revealed that a Ag ion cluster (Agⁿ _m ⁺) exists in the pore structure of ZSM-5 exhibiting photoluminesm cence at 380 nm upon excitation at 332 nm. UV irradiation ( = 285 nm) of Ag⁺ /ZSM-5 at 77 K leads to the transformation of Agⁿ _m ⁺ into a different Ag ion cluster (Ag_m ^(n-1)+) which exhibits photoluminescence at 465 nm upon excitation at 315 nm. This photo-transformation of the Ag ion clusters was found to be thermally reversible under vacuum. It was demonstrated that an electron transfer from the photo-excited Al³⁺ -O^2- to Agⁿ _m ⁺ plays a significant role in this process. In the presence of oxygen, UV irradiation of Ag⁺ /ZSM-5 leads to the formation of O₂- instead of an Ag ion cluster (Ag_m ^(n-1)+), suggesting that oxygen acts as an efficient electron scavenger, which interferes with the electron capture of Agⁿ _m ⁺ under UV irradiation at 285 nm.     

Formation mechanism of nanostructured Ag films from Ag2O particles using a sonoprocess

Nanostructured Ag films composed of nanoparticles and nanorods can be formed by the ultrasonication of ethanol solutions containing Ag₂O particles. The present work examined the formation process of these films from ethanol solutions by two different agitation methods, including ultrasonication and mechanical stirring. The mass-transfer process from Ag₂O particles to ethanol solvent is accelerated by the mechanical effects of ultrasound. Ag⁺ ions and intermediately reduced Ag clusters were released into the ethanol. These Ag⁺ ions and Ag clusters provide absorption bands at 210, 275 and 300 nm in UV-vis spectra. These bands were assigned to the absorption of Ag⁺, Ag ₄ ²⁺ and Ag_n (n?≈?3). The Ag_n clusters that readily grow to become Ag nanoparticles were formed due to the surface reaction of Ag₂O particles with ethanol under ultrasonication. The reactions of Ag⁺ ions in ethanol to form Ag nanomaterials (through the formation of Ag ₄ ²⁺ clusters) were also accelerated by ultrasonication.