CeO2、CaO助剂对甲烷部分氧化制合成气Ni/MgOAl2O3催化剂结构和性能的影响

采用BET、H2 TPR、XRD、TEM和活性评价等表征手段，考察了CeO2、CaO助剂对Ni/MgOAl2O3催化剂物化性质和甲烷部分氧化制合成气反应性能的影响。实验结果表明，单独加入CeO2或CaO助剂可以改善Ni/ MgOAl2O3催化剂中镍物种的还原性能，以CaO尤为明显；CaO作为结构助剂可以降低还原态催化剂中的镍晶粒尺寸，使改性的催化剂具有较好的活性，而CeO2对催化剂的活性未产生显著影响。当CeO2与CaO两种助剂同时对Ni/MgOAl2O3进行改性时，虽然催化剂中镍物种的还原性能没有发生明显变化，但仍具有很好的反应性能，这与CeO2与CaO能够形成CaO-CeO2固溶体有关。CaO-CeO2固溶体不仅与镍物种间存在相互作用，提高了镍物种的分散度、减小了镍晶粒尺寸，还可以提高催化剂的储氧能力和晶格氧的流动性，从而有利于改善其甲烷部分氧化反应性能。     

MgO助剂对甲烷部分氧化Ni/Al2O3催化剂结构和性能的影响

采用分步浸渍法制备了MgO改性的Ni/Al2O3催化剂，采用BET、XRD、H2 TPR、TEM和活性评价等研究方法，考察了MgO助剂对Ni/Al2O3催化剂物化性质和甲烷部分氧化制合成气反应性能的影响。实验结果表明，MgO助剂提高了催化剂镍物种的均一性，抑制了NiAl2O4尖晶石的形成，并且增强了镍物种与载体的相互作用，这与MgO、NiO形成固溶体及与Al2O3形成MgAl2O4有关。同时，适量的MgO助剂可以提高Ni物种在催化剂中分散度，并提高其有效利用率，改性后的催化剂在甲烷部分氧化反应中显示出较好的反应性能。过量的MgO助剂对催化剂的反应性能产生负面影响，MgO的碱性可以促进逆水煤气变换反应，从而导致H2选择性降低和CO选择性提高。     

Rh／SiO2催化剂上甲烷部分氧化制合成气反应

 利用程序升温脱附、程序升温还原、程序升温表面反应、程序升温反应和化学捕获反应等手段，对Rh／SiO2催化剂上甲烷部分氧化制合成气反应进行了研究．结果表明，Rh／SiO2催化剂上甲烷部分氧化制合成气机理属于热解－氧化反应机理．甲烷首先在催化剂上发生解离吸附，产生具有不同H／C比的化学吸附物种CHx（x＝1～3）．其中，具有较高H／C比的CHx可能是甲烷部分氧化反应的活性物种，而具有较低H／C比的CHx可能是催化剂上积碳并导致催化剂失活的来源．活性物种CHx在活性氧物种的作用下，生成含氧中间体物种CHxO或继续脱氢．含氧中间体物种进一步分解，即生成CO和H2；CO2也可由CHx或CHxO物种进一步氧 化生成．     

In对Ni/SiO2催化剂苯甲醚加氢脱氧性能的影响:苯环加氢及 C-C键氢解的抑制作用

由可再生木质素基生物质油加氢脱氧制三苯(苯、甲苯及二甲苯)及燃油可减少对化石能源依赖、缓解环境问题,加氢脱氧催化剂的研究开发为众多学者密切关注.我们以低成本金属Ni为加氢脱氧活性组分,采用金属In对金属Ni催化剂进行改性,旨在增加以苯甲醚为模型反应物加氢脱氧中的三苯收率、降低金属Ni的C-C键氢解及甲烷化活性,提高反应过程中碳收率、降低耗氢量.采用等体积浸渍-程序升温还原法制备了Ni/SiO2及Ni-In/SiO2催化剂,研究了Ni/In比及Ni含量对In改性Ni/SiO2催化剂结构和苯甲醚加氢脱氧性能的影响,利用H2-TPR,H2化学吸附,XRD,NH3-TPD,XPS,TEM及N2物理吸附-脱附等手段对催化剂及其前驱体进行了表征,采用石英管固定床反应器在300°C、常压、H2/苯甲醚摩尔比25及苯甲醚重时空速0.4 h-1的反应条件下考察了催化剂苯甲醚加氢脱氧性能,分析了催化剂结构与性能之间的关系.H2-TPR结果显示,金属In的加入抑制了催化剂前驱体中Ni物种的还原.XRD,H2化学吸附,HAADF-STEM-EDS及XPS等结果表明,经450°C还原制备的Ni-In/SiO2双金属催化剂中Ni和In接触紧密.In的加入明显降低了催化剂表面金属Ni的活性位数量;并且,Ni/In比越低Ni-In/SiO2催化剂H2化学吸附量越小.XPS结果还显示,Ni-In/SiO2催化剂中存在金属In向Ni转移电子.上述结果说明,在Ni-In/SiO2催化剂中金属Ni与In存在较强的相互作用.在苯甲醚加氢脱氧反应中,与Ni/SiO2催化剂相比,Ni-In/SiO2催化剂虽因表面Ni密度较低而具有较低苯甲醚转化率,但其苯环加氢、C-C键氢解及CO甲烷化活性较低,因而具有较高的三苯及环己烷选择性;并且,随Ni/In比的降低(即In含量的增加),Ni-In/SiO2催化剂的加氢、氢解及甲烷化能力呈减弱趋势.随Ni质量含量提高,Ni-In/SiO2双金属催化剂上苯甲醚转化率提高,但对三苯选择性及C-C键氢解能力影响不明显.经分析认为,与Ni/SiO2相比,Ni-In/SiO2催化剂较低的苯加氢及C-C键氢解活性与In对表面连续Ni位隔离作用及金属镍位电子云密度提高有关.在优化的反应条件下,Ni质量含量为40%、Ni/In比为40的Ni-In/SiO2催化剂上三苯收率为60.4%,高于相同Ni质量含量Ni/SiO2催化剂上三苯收率(51.6%).     

Ni(OCH3)2/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换相结合的方法，制备了负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2催化剂。利用IR、TPD、TPSR和微反技术，考察了催化剂的表面结构以及CO2、CH3OH在催化剂表面上的化学吸附和反应性能。结果表明，负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2中，Ni^2 与载体SiO2表面的O^2-以双齿形式配位；在催化剂表面存在CO2的桥式吸附态和甲氧碳酸酯基物种两种吸附态，CH3OH则只有一种分子吸附态。在373-473K条件下，CO2和CH3OH在催化剂上的反应物主要是DMC、H2O以及少量的CO、CH4和CH2O，催化剂的活性由表面甲氧碳酸酯基物种与分子吸附态甲醇的反应决定的。讨论了催化剂上CO2和CH3OH的活化过程及吸附态的形成机理。     

Ni/MWCNT及镧改性Ni/MWCNT催化CO2甲烷化反应的性能

以多壁碳纳米管(MWCNT)为载体, 通过浸渍法制备了负载型镍催化剂和稀土镧改性的镍催化剂, 并对其二氧化碳甲烷化的催化性能进行了研究. 借助比表面积测试、程序升温还原(TPR)、X射线衍射(XRD)和X射线光电子能谱(XPS)等表征手段研究了稀土镧的添加对Ni/MWCNT催化剂结构和表面组成、催化剂还原性能以及CO₂甲烷化反应性能的影响. 结果表明: 稀土镧改性的Ni/MWCNT较Ni/MWCNT催化剂具有更好的CO₂甲烷化活性, 镧组分的加入提高了催化剂表面的镍物种浓度和分散度, 弱化了氧化镍与载体MWCNT之间的相互作用, 促进了氧化镍的还原, 同时提高了表面镍物种的电子密度, 增加了对反应物的吸附能力, 从而提高了其CO₂甲烷化活性. 制备过程中稀土镧的添加次序对催化性能有较明显的影响, 其活性顺序为先浸渍镧后浸渍镍制备的催化剂活性明显好于先浸渍镍后浸渍镧制备的催化剂.     

流化床甲烷/丙烷临氧CO2重整制合成气反应研究

研究了流化床反应器中甲烷、丙烷临氧自热CO2重整制合成气反应中不同催化剂的性能及表面积碳行为，并用热重分析、激光拉曼及透射电镜研究了催化剂表面的积碳物种及积碳量。结果表明，贵金属Pd、Pt由于对烷烃有较强的裂解作用，镍基及贵金属修饰的镍基催化剂表面有大量的纤维状炭生成；碱土和稀土金属改性的镍基催化剂有较好的抗积碳性能，大量碱土金属CaO修饰微球硅胶后负载的镍基催化剂在同等的反应条件下没有发现积碳，碱土金属对催化剂表面碱性的增强是催化剂抗积碳性能提高的原因。     

Ni2(OCH3)2/SiO2催化剂上CO2和CH3 OH的吸附和反应性能

采用表面改性和离子交换相结合的方法制备了Ni2(OCH3)2/SiO2负载型双核金属甲氧基配合物催化剂,利用红外光谱(IR)、程序升温脱附(TPD)、程序升温表面反应(TPSR)和微反技术考察了催化剂的表面结构以及CO2和CH3OH的化学吸附和反应性能.结果表明:Ni2(OCH3)2/SiO2中Ni2+与载体SiO2表面O2-以双齿配位形式键合,甲氧基以桥基形式联结双金属离子形成双核物种Ni2(OCH3)2;CO2在催化剂表面存在甲氧碳酸酯基物种和桥式两种吸附态,CH3OH则只有一种分子吸附态;在100～200℃条件下,CO2和CH3OH在催化剂上的反应产物主要是DMC和H2O;根据反应结果,讨论了催化反应机理.     

高镍负载量Ni/SiO2和低镍负载量Ni-Ce/SiO2催化CO甲烷化的比较研究

采用等体积浸渍法制备了高镍负载量的13%Ni/SiO₂(13Ni/Si)催化剂和低镍负载量的7%Ni-2%Ce/SiO₂(7Ni-2Ce/Si)催化剂.通过N₂物理吸附、XRD、FT-IR、TEM、H₂-TPR/TPD等技术对催化剂进行表征,在连续流动微反装置上考察了催化剂的CO甲烷化活性.结果表明,在7Ni-2Ce/Si催化剂中NiO、CeO₂和SiO₂之间产生的相互作用,改变了Ni-O-Si键的化学环境,促进了氧化镍物种的分散和还原,进而提高了催化剂的活性比表面积,同时在催化剂表面形成了新的中等强度的CO吸附中心.与高镍负载量的13Ni/Si催化剂相比,低镍负载量的7Ni-2Ce/Si表现出更高的CO吸附能力和甲烷化活性.常压下,在CO体积分数1%和空速7 000 h^-1的反应条件下,低镍负载量的7Ni-2Ce/Si催化剂上CO完全甲烷化最低温度为230 ℃,比高镍负载量的13Ni/Si低了30 ℃.     

SnO_2-SiO_2负载Cu、Ni催化剂的CO_2加氢反应性能

采用表面反应改性法制备了SnO2 SiO2 (SnSiO)表面复合物载体 ,用等体积浸渍法制备了SnSiO担载的Cu Ni双金属催化剂。借助BET、XRD、TPR、IR和微反等技术研究了SnSiO及其负载的Ni、Cu双金属催化剂的表面构造、化学吸附及CO2 加氢反应性能。结果表明 :SnSiO是SnO2 单分子层价联于SiO2 表面的复合氧化物 ,仍保持类似SiO2载体的孔结构和比表面 ;SnO2 引入SiO2 表面后可以有效地促进CuO、NiO的还原 ,还原后成为负载在SnSiO载体表面的Cu Ni合金 ;CO2 在负载型Cu Ni合金表面Cu或表面Ni位上发生化学吸附 ,形成线式和剪式吸附态 ;CO2 在催化剂上的加氢反应产物主要是CH3 OH、CH4 、CO和H2 O ,生成CH3 OH的选择性与催化剂组成及反应条件密切相关。Cu Ni催化剂 ,在 0 5MPa ,170℃ ,H2 /CO2 (mol/mol)为 3的条件下 ,CH3 OH的选择性达到 84 6 %。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.