基于RAFT过程的MMA可控自由基聚合及嵌段共聚物的合成

用二硫代酯调控的可逆加成-裂解链转移过程(RAFT)研究了MMA的聚合动力学及分子量分布,分析了引发剂浓度和二硫代酯浓度对反应速度及可控性的影响.用RAFT方法合成了嵌段共聚物PMMA-b-PS及带有自旋标记的嵌段共聚物PMMA-b-PS.     

苯乙烯—环氧乙烷嵌段共聚物的阴离子聚合与表征

用二苯甲烷钾为引发剂,阴离子聚合法合成了苯乙烯（Ｓｔ）－环氧乙烷（ＥＯ）嵌段共聚物,并用ＦＴＩＲ,＾１Ｈ－ＮＭＲ,ＳＥＣ,ＷＡＸＤ和动态粘弹谱对共聚物进行了表征。结果表明所得聚合物为分子量可控,窄分布的两嵌段共聚物。     

活性聚合法合成结构精确的含氟嵌段共聚物

结构精确的含氟嵌段共聚物具有优异而独特的化学和物理性能,有广阔的应用前景,因此受到广泛的关注.含氟嵌段共聚物可分为两类,一类是侧基含氟嵌段共聚物,另一类是主链含氟嵌段共聚物.活性聚合为嵌段共聚物的合成提供了最为重要的方法,利用它可以合成结构精确、分子量可控、分子量分布窄的嵌段共聚物.根据单体的反应特性选择不同的聚合方法,可以得到不同的含氟嵌段共聚物.本文主要综述了近几年利用各种活性聚合方法合成结构精确的含氟嵌段共聚物方面的进展.     

PS-b-P (DMS-stat-VMS)嵌段聚合物的制备及性能

采用活性阴离子聚合方法,以仲丁基锂为引发剂,以苯乙烯、六甲基环三硅氧烷（D3）和2,4,6-三乙烯基-2,4,6-三甲基环三硅氧烷（V3）为反应单体,分步聚合制备了聚苯乙烯-b-聚（二甲基硅氧烷-stat-乙烯基甲基硅氧烷）[PS-b-P（DMS-stat-VMS）]嵌段聚合物.采用傅里叶变换红外光谱、氢核磁共振谱及凝胶渗透色谱对共聚物的化学结构、分子量及分子量分布进行了表征,并通过扫描电子显微镜、原子力显微镜及接触角等测试方法研究了共聚物各链段组分对共聚物形貌及表面亲疏水/油性的影响.结果表明,所制备的共聚物分子量分布较窄,由于各组分性能的差异而呈现出微相分离结构,同时该共聚物保留了PS-b-PDMS原有的表面性质,为设计结构多样性及性能优异的聚硅氧烷共聚物提供了新思路.     

星形PLA-PEG嵌段共聚物胶束的制备与表征

以胆酸为引发剂,用辛酸亚锡催化丙交酯开环聚合合成星型CA-PLA。利用DCC为脱水剂,将不同分子量的端羧基化PEG与星型CA-PLA偶联,合成一系列以胆酸为核的星形两亲性嵌段共聚物,用透析法制备共聚物胶束,并用TEM和DLS研究胶束的性质。合成了分子量为6000和12000的两种CA-PLA,其分子量可以通过胆酸羟基与丙交酯的比例进行控制。将分子量2000和5000的PEG分别与两种CA-PLA偶联,合成了四种星型CA-PLA-PEG嵌段共聚物。共聚物胶束形貌为均匀的球形,粒径为20-40nm,且随共聚物中PLA链段分子量的增加而增大,随PEG链段分子量的增加而减小。临界胶束浓度(CMC)低于同等链段长度的线型PLA-PEG嵌段共聚物胶束。     

聚谷氨酸苄酯-聚乙二醇嵌段共聚物的合成和表征

通过嵌段共聚技术,合成了聚γ－苄基L－谷氨酸（PBLG）作为疏水性链段－聚乙二醇（PEG）作为亲水性链段的嵌段共聚物。用对甲苯磺酸酯化－氨水皂化法合成带有端氨基的聚乙二醇（AT－PEG）,光气－甲苯液相法制备谷氨酸苄酯－N－羟酸酐（BLG－NCA）。用AT－PEG引发BLG－NCA聚合制备PBLG－PEG或PBLG－PEG－PBLG,通过不同的单体、引发剂浓度比调节聚合物分子量。用GPC、^1HNMR、IR对聚合物的结构进行了表征。结果表明,带有端氨基的聚乙二醇确实能引发BLG－NCA生成PBLG和PEG的嵌段共聚物,产物中几乎没有残存的PEG,共聚物的分子量可控。     

基团转移活性聚合物的接枝共聚

以阴离子聚合法合成的窄分布聚苯乙烯（ＮＤＰＳ）进行氯甲基化后,再与由基团转移聚合法合成的活性聚甲基丙烯酸甲酯（ＰＭＭＡ）进行大分子反应,得到了主链为聚苯乙烯,支链为聚甲基丙烯酸甲酯的接枝共聚物（ＰＳｔｇＰＭＭＡ）;探讨了聚合物的合成条件,ＧＰＣ测试结果表明,得到的接枝共聚物的分子量和设计分子量相近且主链和支链分子量均可较好的控制．利用扫描电镜、核磁和红外技术对ＰＳｔｇＰＭＭＡ的形态、结构进行了表征．     

两亲性聚肽三嵌段共聚物的自组装行为

通过开环反应,合成了聚（L-谷氨酸-γ-苯甲酯）-b-聚乙二醇-b-聚（L-谷氨酸-γ-苯甲酯）（PBLG-b-PEG-b-PBLG）三嵌段聚肽共聚物。运用核磁共振氢谱和凝胶渗透色谱表征了聚合物的结构。凝胶渗透色谱测试表明合成的聚合物分子量分布窄。以选择性溶剂透析的方法制备了自组装聚集体,通过透射电子显微镜、扫描电子显...     

聚肽刚性链/聚氧化丙烯嵌段共聚物的合成与相行为

采用活性阴离子聚合方法,以不同分子量的聚氧化丙烯为引发剂合成了不同分子量的聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物,并用^1H-NMR、IR和偏光显微镜等方法对共聚物进行了表征。结果表明：在1,1,2,2－四氨乙烷中,当溶液浓度一定时,聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物呈现出胆甾型液晶的性质。温度升高时,聚（γ－苯甲酯－L－谷氨酸）共聚物的液晶相溶液发生相转变行为,并且其液晶相稳定性低于相同分子量的聚（γ－苯甲酯－L－谷氨酸）。这与利用Flory-Matheson的构象可变液晶分子理论模型的计算结果相一致。     

用双硫酯链转移法合成嵌段聚合物

研究了以双硫酯为链转移剂进行的均聚和嵌段共聚物的合成。首先合成大分子链转移剂,得到分子量可控、多分散性系数（PDI）较小（＜1.30）的均聚物。用末端带有双硫酯基因的PSt,PBMA和PBA为链转移剂,加入第二单体聚合得到分子量可控、且PDI较小的两嵌段聚合物。嵌段聚合时必须加入微量的自由基引发剂以形成大分子自由基,达到较好的控制聚合效果。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.