Nanofriction properties of molecular deposition films

The nanofriction properties of Au substrate and monolayer molecular deposition film and multilayer molecular deposition films on Au substrate and the molecular deposition films modified with alkyl-terminal molecule have been investigated by using an atomic force microscope. It is concluded that ( i ) the deposition of molecular deposition films on Au substrate and the modification of alkyl-terminal molecule to the molecular deposition films can reduce the frictional force; (ii) the molecular deposition films with the same terminal exhibit similar nanofriction properties, which has nothing to do with the molecular chain-length and the layer number; (iii) the unstable nanofriction properties of molecular deposition films are contributed to the active terminal of the molecular deposition film, which can be eliminated by decorating the active molecular deposition film with alkyl-terminal molecule, moreover, the decoration of alkyl-terminal molecule can lower the frictional force conspicuously; (iv) the relat     

Aqueous RAFT polymerization of acrylamide: A convenient method for polyacrylamide with narrow molecular weight distribution

Controlled and homogeneous free-radical polymerization of acrylamide(AM) in aqueous phase was realized by using S,S'-bis(α,α'-dimethyl-α'-acetic acid)-trithiocarbonate as a reversible addition-fragmentation transfer(RAFT) agent. Linear increases in molecular weight with conversion and narrow molecular weight distribution were observed for polyacrylamide(PAM) throughout the polymerization. By this method, PAMs with controlled molecular weight(up to 1.0 × 10~6) and narrow molecular weight distribution(M_w/M_n 1.2) were prepared. This study provides an effective method for synthesis of PAMs with narrow molecular weight distribution under environmentally friendly conditions.     

PHASE SEPARATION IN BIMODAL MOLECULAR WEIGHT HIGH DENSITY POLYETHYLENE WITH DIFFERING BRANCH CONTENTS BY MOLECULAR DYNAMICS AND MESODYN SIMULATION

The phase behavior of bimodal molecular weight high density polyethylene(BHDPE) in solid state was investigated.Hildebrand solubility parameters(δ) were calculated for the models of blends of higher molecular weight branch polyethylene(HBPE) with different branch contents and lower molecular weight linear polyethylene(LLPE),by using molecular dynamics(MD) simulations.These 3 values were then used to calculate the corresponding Flory-Huggins interaction parameter(x) between HBPE and LLPE models.In order t...     

钒铝磷酸盐分子筛的合成与表征

The first discovery of aluminophosphate (AlPO4) molecular sieve was reported by Wilson et al[1] in 1982. Since then, the successful incorporation of other metal and/or nonmetal cations into the framework structure of AlPO4 molecular sieve has resulted in the generation of metal aluminophosphate (MeAPO) and metal silicoaluminophosphate (MeAPSO) molecular sieves[2～5].     

Theoretical methods for excited state dynamics of molecules and molecular aggregates

This contribution provides a summary of proposed theoretical and computational studies on excited state dynamics in molecular aggregates, as an important part of the National Natural Science Foundation (NNSF) Major Project entitled "Theoretical study of the low-lying electronic excited state for molecular aggregates". This study will focus on developments of novel methods to simulate excited state dynamics of molecular aggregates, with the aim of understanding several important chemical physics processes, and providing a solid foundation for predicting the opto-electronic properties of organic functional materials and devices. The contents of this study include: (1) The quantum chemical methods for electronic excited state and electronic couplings targeted for dynamics in molecular aggregates; (2) Methods to construct effective Hamiltonian models, and to solve their dynamics using system-bath approaches; (3) Non-adiabatic mixed quantum-classic methods targeted for molecular aggregates; (4) Theoretical studies of charge and energy transfer, and related spectroscopic phenomena in molecular aggregates.     

Studies on the Self-condensing Vinyl Polymerization of a Novel Maleimide Inimer

The self-condensing vinyl polymerization(SCVP) of a novel maleimide inimer(initiator-monomer) 1, N-(4-α-bromobutyryloxy phenyl) maleimide with the complex of CuBr/Bipy (2, 2‘-bipyridine) as the catalyst was studied. GPC was used to determine the molecular weight and the results show that the molecular weight increases exponentially with polymerization time during the first hour, and then the rate of increase molecular weight slows down. The molecular weight also increases with increasing dosage of the catalyst. The coincidence of the molecular weights determined by ^1H NMR and GPC proves that the polymer obtained from the SCVP of inimer 1 has a linear structure, whichis further verified by ^13C NMR spectrum. A hyperbranched polymer was obtained by the copolymerization of inimer 1 and styrene.     

VALENCE STATE OF C AtOMS AND σ_t-η_n SEPARABILITY OF MOLECULAR ORBITALS IN THE (BUCKMINSTER)FULLERENE C_(50)

The valence state of C atoms and the structure of molecular orbitals of the (Buckminster)Fullerene C_(60)have been demonstrated. It has been shown that when a motion-coordinate system is adopted, in which the coordinate origin is at every C atom, the z axis is in the direction of the normal and the (x,y) axes are in the direction of tangents of C_(60)'s spherical surface, 240 valence atomic orbitals of C_(60) can be divided into two groups. All (P_x, P_y)atomic orbitals named as Pt ones and all the other P_z atomic orbitals named as p. ones, That is to say that if we name the molecular orbital linearly combined of P_t atomic orbitals as σ_t and the molecular orbital linearly combined of P_n atomic orbitals as π_n, the 240 valence molecular orbitals are of the property of σ_t-π_n separability. It has also been shown that the frontier and nearby frontier molecular orbitals are π_n ones, and therefore the essential physical and chemical properties of C_(60) are determined by its π_n molecular orbitals.     

MOLECULAR WEIGHT DEPENDENCE OF THE MELTING BEHAVIOR OF POLY(ε-CAPROLACTONE)

Poly(ε-caprolactone) (PCL) with different molecular weights was synthesized and characterized by a gelpermeation chromatograph equipped with multiple detector. The melting behavior of PCL was also studied. It was found thatthe equilibrium melting points (T_m~0) of PCL samples depend on their molecular weights. Wide angle X-ray diffractionmeasurements (WAXD) and DSC measurements showed that the crystals of the high molecular weight PCLs were moreperfect than those of the low molecular weigh ones. These results demonstrate that the concentration of the end groups ofPCL chains is the main factor that influences the melting behavior. The fusion enthalpy per repeating unit (ΔH_u) wasdetermined to be 11.3 kJ/mol for PCL.     

混合配体席夫碱稀土茂配合物催化合成聚甲基丙烯酸甲酯

The synthesis of high molecular mass (Mr＞5×105) polymers with a narrow molecular mass distribution (Mr,max/Mr,min＜1.05) is a challenging theme in modem polymer chemistry.     

STM image of tungstosilicic acid molecular layer on highly oriented pyrolytic graphite

Molecular layer of tungstosilicic acid (H4SiW12O40) deposited on freshly-cleaved highly oriented pyrolytic graphite (HOPG) was observed by scanning tunneling microscopy (STM) in air at room temperature.The molecular dimension (11.5 A) of H4SiWi2O4o measured by STM is consistent with known crystallographic parameter.We also imaged the boundary of H4SiW12O40 molecular layer on HOPG showing that molecular layer of H4SiW12O40 was formed.It has been proved that individual tungstosilicic acid species is imaged.The probable reason for the formation of the molecular layer is also discussed.     

MM CALCULATIONS OF THE METAL-PROTEIN MODEL COMPLEXES Ⅰ.MOLECULAR FORCE FIELD FOR COBALT COMPEXES

Cobalt-protein complexes play an important role in biochemical processes.The structure of themodel molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular forcefield (MM2) parameters have been developed for the particular class of the complexes.     

Towards Single-component Molecular Conductor [Ni(dmit)_2] by Charge Disproportionation:2[Ni(dmit)_2]~(-0.5)[Ni(dmit)_2]+[Ni(dmit)_2]~-

It was commonly thought that a molecular conductor or semiconductor should be composed of at least two components to make the conducting component in partially charged state. However, this idea became questionable by the recent report of the single-component molecular conductor [Ni(tmdt)2]1 as well as several reports about single-component molecular semiconductors such as [Ni(ptdt)2]2 and [Ni(C10H10S8)2]3. In fact, as early as 1985, [Ni(dmit)2] as a by-product in synthesizing TTF[Ni(dmit…     

Retention Behaviors of Uronic Acid-containing Polysaccharides and Neutral Polysaccharides in HPGPC

The determination of molecular weights (Mw) of polysaccharides has served as an important process since the physical properties of the polysaccharides are closely related to their Mw and/or molecular weights distribution (MWD). For Mw and MWD determinations, high performance gel permeation chromatography (HPGPC) has gained wide acceptance as a preferred method due to its high sensitivity, speed and reproducibility. In chromatography, it is well known that the molecular weights are determ…     

Synthesis and Characterization of Ferrocene-terminated Ruthenium Phenylacetylide COmplexes with Alligator Clips

Ferrocene-terminated trans-Ru(dppm)2 (dppm=Ph2PCH2pph2)-containing molecular wires with alligator clips were prepared.They are suitable for self-assembly on gold electrode to investigate the influence of metal incorporation on the electron transportation property of the molecular wires.     

Polymerization of (meth)acrylates with aluminum-based initiators

<正>A simple and effective way to prepare poly(acrylate)s,such as poly(methacrylate),poly(butyl acrylate) and poly(butyl methacrylate),has been achieved by using the single component aluminum-based compounds,such as modified methylaluminoxane(MMAO),triisobutylaluminium(TIBA) and triethylaluminium(TEA) as initiators.Effective initiations and high molecular weight polymers with unimodal molecular weight distributions could be easily obtained by varying the reaction parameters of systems under mild conditions.Although these aluminum compounds were inefficient initiators for methyl methacrylate(MMA) polymerization,they exhibited remarkable catalytic activity for butyl methacrylate(BMA) polymerization,affording high molecular weight poly(BMA)s.     

PREPARATION OF POLY （LACTIC ACID） THROUGH THIONYL CHLORIDE ACTIVATED POLYCONDENSATION

A two-step process was used to synthesize the high molecular weight poly (lactic acid) using thionyl chloride as an activator for the polycondensation of prepolymer of lactic acid.The products were characterized by GPC,DSC and 1H-NMR.Poly(L-lactic acid)(PLLA) with molecular weight Mw:32875 was obtained when thionyl chloride was used.while low molecular weight PLLA MW:7350 was yielded without thionyl chloride.Effects of the concentration of thionyl chloride,polymerization time and bases on the molecular weight of poly(lactic acid) were investigated.In DSC scans the glass transition temperatures(Tg)of the resulting polymers varied from 25.3 to 57.6℃.and the Tg of poly(L-lactic acid)was higher than that of poly (D,L0lactic acid)(PDLLA).The melting points of poly(L-lactic acid)and poly (D,L-lactic acid) could not be found unless the polymers were obtained by thionyl chloride activator.     

The stereocomplex formation and phase separation of PLLA/PDLA blends with different optical purities and molecular weights

In this study, the poly(L-lactide)/poly(D-lactide)(PLLA/PDLA) blends with different optical purities of PLLA and various molecular weights of PDLA are prepared by solution mixing, and the stereocomplex formation and phase separation behaviors of these blends are investigated. Results reveal that optical purity and molecular weight do not vary the crystal structure of PLA stereocomplex(sc) and homochiral crystallites(hc). As the optical purity increasing in the blends, the melting temperature of sc(Tsc) and the content of sc(ΔHsc) increased, while the melting temperature of hc(Thm) hardly changes, although the content of hc(ΔHhm) decreased gradually. The Tsc and ΔHsc are also enhanced as the molecular weight of PDLA reduces, and the ΔHhm reduces rapidly even though the Thm does not vary apparently. With lower optical purities of PLLA and higher molecular weights of PDLA, three types of crystals form in the blends, i.e., PLA sc, PLLA hc and PDLA hc. As molecular weight decreases and optical purity enhances, the crystal phase decreases to two(sc and PDLA hc), and one(sc) finally. This investigation indicates that the phase separation behavior between PLLA and PDLA in the PLLA/PDLA blends not only depends on molecular weights, but also relies on the optical purities of polymers.     

High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

VINYL POLYMERIZATION OF NORBORNENE CATALYZED BY [2-(2-BENZIMIDAZOLYL)-6-((1-ARYLIMINOETHYL)PYRIDYL)]NICKEL CHLORIDE/MAO SYSTEM

The catalytic system of[2-(2-benzimidazolyl)-6-((1-aryliminoethyl)pyridyl)]nickel chloride/MAO(methylalu- minoxane)was found to be good active for vinyl polymerization of norbornene and provided polymers with relative narrow molecular distributions.Various reaction parameters,such as the ratios of nickel precursor to MAO or monomer norbornene, and the nature of the ligands in complexes were carefully investigated to realize their effects on the catalytic activities, polymer molecular weight and molecular...