重油催化裂化汽油中酚类化合物的分离分析

利用100g/L NaOH作萃取剂，二氯甲烷为反萃取剂，油剂比为5：1（体积比）时浓缩分离石家庄炼油厂和燕山石油化工公司的重油催化裂化（RFCC）稳定汽油和预碱洗后汽油中的酚类化合物；多面手利用色谱-质谱联用法对浓缩分离出的酚类化合物进行了检测，结果发现RFCC汽油中的酚类化合物主要是C0-C3苯酚，还有少量C4苯酚；所用稳定汽油和预碱洗后汽油的酚类组成相似，但碱洗后苯酚含量减少。     

煤液化油中碱性氮化物的分析方法及分布研究

采用酸液萃取的方法从煤液化油中提取碱性氮化物,气相色谱-质谱联用(GC-MS)和氮化学发光检测器(GC/NCD)进行定性定量。从分析结果可见,碱性氮化物可以通过酸液萃取与油样达到较完全的分离。用GC-MS定性出全馏程煤液化油中含有38种碱性氮化物,主要为吡啶类、苯胺类以及喹啉类氮化物。用GC/NCD对18种全馏程煤液化油中的碱性氮化物定量分析,结果显示其占碱性氮化物总量的88.9%,其中吡啶类占碱性氮化物总量的24.48%,苯胺类占37.98%,喹啉类占26.48%。     

宝明页岩柴油碱性氮化物的梯度富集及GC-MS分析

利用溶剂萃取和柱色谱等技术浓缩分离新疆宝明页岩油柴油馏分中的碱性氮化物。以宝明页岩柴油为原料,经糠醛溶剂精制,初步得到富集碱性氮化物的抽出油。以抽出油为深度富集碱性氮化物的原料,采用柱色谱等分离方法,从抽出油中分离得到碱性氮化物。利用傅立叶变换红外光谱仪(FT-IR)和气相色谱-质谱联用仪(GC-MS)分别对富集的碱性氮化物进行官能团检测和定性、定量分析。结果表明:新疆宝明页岩油柴油馏分中的碱性氮化物经溶剂精制和柱色谱等分离方法梯度富集后,碱性氮化物的质量分数由抽出油的12.08%提高到最终产物的69.48%,并在富集分离的产物中鉴定出60种碱性氮化物,其中主要为苯胺类、喹啉类和吡啶类化合物,各占25.85%,23.56%和16.52%。     

吸附法脱除烷基化用汽油中的碱性氮化物

考察了磺酸树脂NKC-9、CT-175、D005-Ⅱ和LSI-600以及13X分子筛对催化裂化汽油(FCC 汽油)中碱性氮化物的脱除能力,以及对汽油中的烯烃和噻吩类硫化物的吸附影响.结果表明,以LSI-600为吸附剂时,对FCC汽油中碱性氮化物的吸附选择性最佳.在室温25℃左右、常压,剂油质量比1:35,碱性氮的脱除率达到100%所需要的吸附时间为15min,经溶剂再生,可重复使用.对这5种吸附剂,增大孔径和比表面积均有利于碱性氮化物的吸附,但当孔径足够大时,孔径和比表面积对碱性氮吸附的影响程度减弱.     

重油催化裂化汽油中含硫化合物的分析

 采用气相法 ,分别利用火焰光度检测器 (FPD)和原子发射检测器 (AED)对中国石化北京燕山石油化工公司 (简称燕化 )炼油厂和石家庄炼油厂生产的重油催化裂化 (RFCC)汽油中的硫化物进行了分析。燕化炼油厂RFCC汽油中总硫只有 2 9 5mg/L ,采用FPD无法检测 ;石家庄炼油厂的RFCC汽油中总硫为 72 0 1mg/L。用标样和气相 质谱法 (GC MS)定性 ,FPD分离检测出 19种硫化物 ,主要是硫醇、噻吩类硫化物 ,硫醚类硫化物和二硫化物均未检出。用AED鉴定出燕化炼油厂RFCC汽油中的硫化物 12种 ,主要是噻吩和四氢噻吩类、低碳硫醇和二硫化物。     

盐析辅助液液萃取/高效液相色谱-串联质谱法测定渔业水体中的7种喹诺酮类抗生素

利用盐析辅助液液萃取（SALLE）/高效液相色谱－串联质谱（HPLC－MS/MS）建立了测定渔业水体中环丙沙星等7种喹诺酮类抗生素的分析方法。水样用乙腈提取,硫酸镁盐析分层,提取液经氮吹浓缩后,采用Waters Atlantis C18 色谱柱 （150 mm × 2.1 mm,3.0 μm）以0.1%（体积分数）甲酸水溶液－甲醇为流动相进行梯度洗脱,采用电喷雾正离子模式检测,外标法定量。实验考察了水样pH值、萃取剂、盐析剂以及涡旋混合时间对萃取效率的影响。在最优的实验条件下,7种喹诺酮类抗生素在各自的质量浓度范围内线性良好,相关系数（r2）均大于0.995,检出限（LOD）和定量下限（LOQ）分别为3～10 ng/L和10～25 ng/L。对空白水样进行3个水平的加标回收实验,回收率为77.8%～104%,相对标准偏差（RSD）为3.1%～10%。该方法简单、灵敏、高效,可应用于渔业水体中喹诺酮类抗生素的检测。     

多烷基支链仲胺从碱性氰化液中萃取金

研究了多烷基支链促胺从碱性氰化液中萃取金,考察了平衡时间、水相初始pH值、金浓度、离子强度、温度、萃取剂浓度、稀释剂、相比等因素对金萃取率的影响,绘制了萃取等温线,测定了金的饱和容量,考察了萃取体系对银（Ⅰ）、铁（Ⅱ）、铜（Ⅰ）、镍（Ⅱ）、锌（Ⅱ）的萃取性能,计算出了金与这些杂质元素的分离系数,研究了负载有机相中金的反萃,结果表明,该萃取体系在pH5－11范围内对Au（CN）2^－有较高的萃取率和选择性,pH1／2＝11.7,可用于碱性氰化液中金的萃取分离。     

TritonX-100-盐-水液-固萃取体系分离Co,Cd,Zn

在含有一定浓度硫酸铵的条件下，ＴｒｉｔｏｎＸ－１００水溶液能形成盐水相与聚合物固相。本实验研究了Ｃｏ（Ⅱ）、Ｃｄ（Ⅱ）、Ｚｎ（Ⅱ）、Ｃｕ（Ⅱ）、Ｆｅ（Ⅲ）与４－（２－吡啶偶氮）间苯二酚（ＰＡＲ）形成的配合物在ＴｒｉｔｏｎＸ－１００盐水萃取体系液固两相中的分配行为。主要探讨萃取酸度，萃取剂用量和硫酸铵浓度等条件对金属离子萃取率的影响。用控制酸度的方法实现了Ｃｏ（Ⅱ）与Ｃｄ（Ⅱ），Ｃｏ（Ⅱ）与Ｚｎ（Ⅱ）的定量分离。每组金属离子浓度在１∶１０００倍情况下分离互不干扰，结果满意。该法可用于样品的提纯与分离。     

超高效液相色谱－串联质谱法同时测定血液和尿液中10种2C系列苯乙胺类衍生物

该文建立了同时检测血液、尿液样本中2C－H、2C－D、2C－P、2C－T－2、2C－T－4、2C－T－7、25D－NBOMe、25C－NBOMe、25B－NBOMe和25I－NBOMe 10种2C系列苯乙胺类衍生物含量的超高效液相色谱－串联质谱（UPLC－MS/MS）法。通过比较沉淀蛋白（PPT）、液－液萃取（LLE）和固相萃取（SPE）3种前处理方法,选用甲醇沉淀蛋白法对血液和尿液样品进行提取。通过对色谱柱和流动相的优化,选用甲醇－水（0.1%甲酸）作为流动相,ACQUITY UPLC?BEH C18（100 mm × 2.1 mm,1.7 μm）色谱柱进行分离。串联质谱的离子源为电喷雾电离源（ESI+）,采用多反应监测模式（MRM）进行检测。10种目标物在0.005 ~ 50 ng/mL范围内线性关系良好,相关系数（r2）为0.995 8 ~ 0.999 9。血液和尿液中的检出限分别为0.01 ~ 2 ng/mL和0.002 ~ 5 ng/mL,3个不同加标浓度（1、5、20 ng/mL）下,血液、尿液中的基质效应为71.9%~112%,提取回收率为78.8% ~ 99.3%,日内、日间相对标准偏差（RSD,n = 3）均不高于15%。该方法分离效果好,提取回收率高,基质效应低,且操作简便,检材用量少,适用于血液和尿液中2C系列苯乙胺类衍生物的快速检测。     

聚N－烷基丙烯酰胺类凝胶及其温敏特性

研制成功５种聚Ｎ－烷基丙烯酰胺类温敏凝胶：聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ），聚Ｎ－异丙基丙烯酰胺＋甲基丙烯酰胺（ＰＮＩＰＡ／ＭＡＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺（ＰＮＤＥＡ），聚Ｎ－正丙基丙烯酰胺（ＰＮＮＰＡ），聚Ｎ，Ｎ－二乙基丙烯酰胺＋Ｎ－叔丁基丙烯酰胺（ＰＮＤＥＡ／ＮＴＢＡ），并系统研究了这些凝胶的温敏相交特性．以聚Ｎ－异丙基丙烯酰胺（ＰＮＩＰＡ）凝胶相交特性为基础的凝胶萃取过程对牛血清白蛋白和兰葡聚糖溶液的浓缩实验表明，凝胶萃取对于浓缩和制备贵重生化制品是很有效的．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.