采用巯基-BPO氧化还原引发体系实现GMA在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,制得了表面带有巯基的改性微粒MPMS-SiO2.使改性微粒MPMS-SiO2表面的巯基与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体甲基丙烯酸缩水甘油酯(GMA)在硅胶微粒表面的引发接枝聚合,制得了接枝度为26g/100g的接枝微粒PGMA/SiO2.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒PGMA/SiO2进行了表征。在此基础上,重点研究了主要因素对巯基-BPO体系引发GMA接枝聚合的影响.研究结果表明,巯基-BPO体系引发的接枝聚合,由于活性位点位于固体表面,因此也是一种表面引发接枝法。与在固体微粒表面引入可聚合双键的"穿过接枝"("grafting through")法相比,巯基-BPO引发体系可更有效地实现油溶性单体的接枝聚合.为制得高接枝度的接枝微粒PGMA/SiO2,适宜的温度为55℃,适宜的BPO用量为单体的1wt%左右,适宜的单体浓度为10 wt%。     

表面引发接枝聚合法制备凹凸棒土/聚甲基丙烯酸甲酯杂化粒子的研究

将γ-氨丙基三乙氧基硅烷(APTES)接枝到凹凸棒土(AT)表面,制得表面键合伯氨基的改性粒子AT-APTES;通过AT-APTES表面的伯氨基和过硫酸铵(APS)构成氧化-还原引发体系,采用无皂乳液法实现甲基丙烯酸甲酯(MMA)在AT表面接枝聚合,制得最高接枝率为29.4%的杂化粒子AT-g-PMMA;采用红外光谱(FTIR)、拉曼光谱(Raman)、透射电镜(TEM)以及热失重分析(TGA)等方法对杂化粒子AT-g-PMMA进行了表征;研究了主要配方及工艺条件对表面引发接枝聚合接枝率的影响.结果表明,伯氨基-过硫酸铵引发体系可以有效引发MMA在AT表面接枝聚合,由于引发点位于AT表面,故接枝率较高.本研究体系适宜的温度为65℃,单体MMA用量为水质量的6%,APS用量为单体质量的1%,此工艺条件下可有效减小均聚反应对接枝聚合反应的影响.先接枝到AT表面的聚合物对后续的接枝聚合反应产生抑制作用,接枝率越高,抑制作用越大.     

构建巯基-Ce(Ⅳ)盐氧化还原引发体系实现丙烯腈在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,将巯基引入硅胶微粒表面(SiO2-MPMS),构成巯基-Ce(Ⅳ)盐氧化-还原引发体系,探索研究了丙烯腈在硅胶微粒表面的引发接枝聚合,制得了高接枝度(30 g/100g)的接枝微粒SiO2-MPMS-g-PAN.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-MPMS-g-PAN进行了表征.在此基础上,重点研究了主要因素对巯基-Ce(Ⅳ)盐体系引发AN接枝聚合的影响.研究结果表明,类似于羟基-Ce(Ⅳ)盐体系,巯基-Ce(Ⅳ)盐体系也可以有效地引发乙烯基单体在固体微粒表面接枝聚合.与在固体微粒表面引入可聚合双键的"grafting through"接枝聚合法相比,铈盐引发的接枝聚合,由于活性位点居于载体表面,故具有高的接枝度,是一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-MPMS-g-PAN,本研究体系适宜的酸浓度为0.25 mol/L;Ce(Ⅳ)盐浓度为5.0×10-3 mol/L;接枝聚合宜在50℃下进行.     

用ATRP方法制备聚苯乙烯/纳米二氧化硅杂化粒子

采用过量的甲苯-2,4-二异氰酸酯(TDI)对SiO₂纳米粒子表面进行修饰, 将原子转移自由基聚合(ATRP)引发剂引入到SiO₂粒子表面合成大分子引发剂, 采用ATRP技术将聚苯乙烯(PS)大分子链接枝到SiO₂表面制备出以纳米二氧化硅为核, 聚苯乙烯为壳的PS/SiO₂杂化粒子. 利用红外光谱(FTIR)、核磁共振谱( NMR)、凝胶色谱(GPC)等实验手段对杂化粒子及表面接枝聚苯乙烯进行了表征分析.     

构建芳叔胺-BPO氧化还原引发体系实现苯乙烯在硅胶微粒表面的高效接枝聚合

首先使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行了表面改性,制得表面带有伯胺基的改性微粒SiO2-AMPS,接着使4-(二乙氨基)水杨醛(DEAS)与微球SiO2-AMPS发生席夫碱反应,制得表面含有芳叔胺基的改性微粒SiO2-DEAS.使改性微粒SiO2-DEAS表面的芳叔胺基团与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体苯乙烯(St)在硅胶微粒表面的引发接枝聚合,制得了高接枝度(27 g/100g)的接枝微粒SiO2-DEAS-g-PSt.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-DEAS-g-PSt进行了表征.在此基础上,重点研究了主要因素对芳叔胺-BPO体系引发St接枝聚合的影响.研究结果表明,与在固体微粒表面引入可聚合双键的"穿过接枝"(grafting through)法相比,芳叔胺-BPO体系引发的接枝聚合,由于活性位点位于载体表面,故具有高的接枝度,是油溶性单体的一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-DEAS-g-PSt,适宜的温度为50℃,适宜的BPO用量为单体的3 wt%左右,适宜的单体浓度为10 wt%.     

氨基-铈盐氧化还原体系引发对苯乙烯磺酸钠在硅胶微粒表面的接枝聚合

使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面化学改性,将氨基引入硅胶微粒表面,构成氨基-Ce(Ⅳ)盐氧化-还原引发体系。研究了在其作用下对苯乙烯磺酸钠(SSS)在硅胶微粒表面的接枝聚合,制得了具有较高接枝度(18g/100g)的接枝微粒PSSS/SiO2。采用FTIR、SEM及TGA等方法对接枝微粒进行表征。考察了对该表面引发接枝聚合体系接枝度影响的主要因素。结果表明,氨基-Ce(Ⅳ)盐体系可以有效地引发乙烯基单体在固体微粒表面的接枝聚合,氨基的质子化对产生自由基的引发步骤具有负影响;为提高PSSS的接枝度,引发剂溶液(铈盐+硫酸)宜采用滴加的方式加入;适宜的单体浓度为14(wt)%;接枝聚合宜在50℃下进行。接枝微粒PSSS/SiO2是一种功能复合微粒,凭借离子交换作用,对重金属离子和稀土离子均可产生强的吸附作用。     

通过RAFT聚合制备SiO2/接枝共聚物纳米杂化粒子

以二氧化硅(SiO2)纳米粒子表面键接的二硫代苯甲酸酯作为可逆加成-断裂-链转移(RAFT)聚合反应的链转移剂, 在室温下引发苯乙烯和马来酸酐进行表面RAFT交替共聚反应, 制得了SiO2/苯乙烯-alt-马来酸酐杂化材料. 通过聚氧化乙烯(PEO)的羟基与马来酸酐的酯化反应, 将PEO接枝到SiO2纳米粒子的表面, 增加了硅粒子的生物相容性. 用FTIR, TGA和TEM对杂化材料的结构、组成和形貌进行了表征.     

纳米SiO_2锚固光敏基团引发MMA光接枝聚合研究

对纳米SiO2进行了锚固光引发剂的表面修饰,进而引发甲基丙烯酸甲脂(MMA)光接枝聚合制备有机/无机复合粒子.纳米SiO2粒子首先用氯化亚砜进行表面氯化,再与光引发剂2-羟基-4-(2-羟基乙氧基)-2-甲基苯丙酮(Irgacure2959)反应从而锚固上光引发剂.通过紫外光引发MMA在经过修饰过的纳米SiO2表面上进行表面光接枝聚合.采用IR、TGA和TEM等方法表征了接枝前后纳米粒子的变化,证明了表面接枝物的存在,并研究了不同反应条件对单体转化率、接枝率和接枝效率的影响.研究结果表明,搅拌对接枝过程的影响比较显著.TGA结果显示未搅拌聚合时接枝率只能达到比较小的程度,而在搅拌条件下180min内MMA的接枝率可达到110%.     

生物医用材料表面光引发活性接枝聚合研究新进展

表面接枝聚合改性已经成为提升生物医用材料性能的最重要方法之一.参比其他活性接枝聚合方法,光引发活性接枝聚合因其独特的优势已被越来越广泛地应用于生物医用材料表面改性.根据光引发剂的类型,目前应用最多的光引发活性接枝聚合的引发体系主要有3种:光引发-转移-终止剂介导的聚合引发体系、二苯甲酮及其衍生物引发体系、硫杂蒽酮类引发体系.本文首先简要介绍了上述3种光引发活性接枝聚合体系的发展历程、接枝机理以及特点.同时结合本课题组相关研究工作,重点论述了光引发接枝聚合技术在3个不同生物医用领域的主要应用:(1)抗菌表面,利用光活性接枝的特点构建层状功能高分子刷,实现表面抗菌功能的阶段性需求.(2)免疫检测表面,使用光活性接枝方法构建层状功能高分子刷,解决检测灵敏度低以及蛋白干扰问题.(3)生物活性分子表面固定,利用可见光活性接枝聚合体系,实现酶在表面的固定化使用以及细胞表面修饰以提高细胞稳定性.最后展望了生物医用材料表面光引发活性接枝聚合研究的发展趋势.     

聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料的制备与表征

采用2,2,6,6-四甲基-1-哌啶氧化物(TEMPO)的溴盐对化学共沉淀法制备的Fe3O4纳米粒子进行表面修饰,以该粒子为过氧引发剂,苯乙烯(St)、马来酸酐(MA)为单体,采用"活性"/可控自由基聚合技术在粒子表面原位引发聚合,制备了聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料,并对纳米Fe3O4及杂化材料进行了FT-IR、XRD、TGA、TEM和GPC表征。结果表明,所制备的纳米杂化材料的平均粒径约为70 nm,磁性粒子表面的聚合物分子链随着聚合时间的增长而增长。振动样品磁强计测试结果显示,在室温、外加磁场下,该纳米杂化材料呈现超顺磁性,饱和磁化强度随着包覆聚合物量的增加而降低。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.