钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路：新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。     

全固态介观太阳能电池:从染料敏化到钙钛矿

介观太阳能电池(Mesoscopic Solar Cells)作为新一代太阳能电池的突出代表, 具有原材料来源丰富, 制备工艺简单, 光电转换效率高等优点, 从而具有广阔的应用前景. 本工作简要评述了全固态介观太阳能电池从染料敏化太阳能电池(Dye-sensitized solar cells)发展到钙钛矿太阳能电池(Perovskite solar cells)过程中新材料、新技术和新概念的研究进展. 1998年, Grätzel课题组首次将固态有机空穴传输材料spiro-OMeTAD应用到染料敏化太阳能电池中, 制备出全固态染料敏化太阳能电池, 虽然仅获得了0.74%的光电转换效率, 但是却使得全固态染料敏化太阳能电池迅速发展成为介观太阳能电池的重要研究方向. 2012年, Park与Grätzel课题组合作, 使用钙钛矿型吸光材料(CH₃NH₃)PbI₃作为敏化剂, spiro-OMeTAD作为空穴收集层, 制备出光电转换效率达到9.7%的全固态介观太阳能电池, 又被称为钙钛矿太阳能电池. 自此, 基于钙钛矿材料的介观太阳能电池迅速成为太阳能电池领域的研究热点. 目前, 钙钛矿太阳能电池的最高公证效率已经达到20.1%. 钙钛矿太阳能电池作为介观太阳能电池商业化道路上里程碑式的突破, 在材料开发、界面优化以及器件稳定性方面的研究仍充满挑战, 也期待新的突破.     

钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路:新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。     

D-π-A-π-D型非掺杂小分子空穴传输材料的合成及其在反向钙钛矿太阳能电池中的应用

设计合成了三种以（甲氧基）三苯胺为给体（Donor,D）,苯环为共轭π桥,羰基（或双氰基乙烯基）为受体（Acceptor,A）的D-π-A-π-D型有机小分子空穴传输材料1-T、1-OT和1-OTCN.对三个化合物的热稳定性、光物理以及电化学性质进行表征,并将它们作为空穴传输材料运用至钙钛矿太阳能电池中,研究其光伏特性.实验结果表明,通过引入具有不同给（吸）电子能力的基团,可对材料的光电性质进行有效调控.基于小分子空穴传输材料1-T、1-OT和1-OTCN的非掺杂反向钙钛矿太阳能电池器件光电转化效率（PCE）分别为13.0%、14.4%以及16.8%.其中,基于甲氧基和双氰基修饰的1-OTCN电池器件,由于空穴传输层与钙钛矿界面发生更有效的电荷跃迁和收集,电荷复合较少,因此器件性能最佳,1-OTCN的疏水性质使得其对应器件效率和水氧稳定性均优于常用空穴传输材料PEDOT：PSS（PCE：13.0%）.     

一种非线性结构空穴传输材料的合成及其光伏性能研究

以三苯胺为电子给体单元,4-叔丁基-甲氧基苯环为母核,设计合成了1种非线性“Y型”结构的空穴传输材料（2TPA-ph-tbyl）。光电化学测试结果表明该材料与钙钛矿材料能级匹配。单晶X射线衍射结果表明,该分子通过端位基团三苯胺形成分子间C-H/π相互作用。这种较强的侧链堆积作用使2TPA-ph-tbyl获得了3.13× 10-5 cm2 V-1 s-1的空穴迁移率,是商用空穴传输材料PEDOT：PSS的1.5倍。将其制备成倒置结构钙钛矿太阳能电池,开路电压达到1000 mV、短路电流密度为21.53 mA?cm-2,填充因子为0.71,其光电转换效率达到15.2%,高于PEDOT：PSS（13.7%）。稳态光致发光和阻抗测试表明,2TPA-ph-tbyl可以促进钙钛矿-空穴传输材料界面电荷传输,降低界面电荷复合,从而提高电池的开路电压和短路电流。上述结果表明,具有非线性结构的空穴传输材料可以通过增强分子间的侧链堆积效应,提高材料的空穴迁移率,进而提高电池的光电转换效率。     

碳基钙钛矿太阳能电池的研究进展

由于具有成本低、工艺简单等优点,有机-无机杂化太阳能电池(PSCs)的研究和发展受到了广泛的关注,光电转换效率也快速提升到与传统晶体硅太阳能电池相当的水平。 然而,PSCs稳定性差的问题严重限制了其商业化。 在各种PSCs中,基于碳电极的无空穴传输层器件(C-PSCs)去除了影响稳定性的有机空穴传输层和金属电极,使得器件稳定性得到了明显的提高,是最具有应用前景的电池器件之一。 自从2013年首次报道以来,C-PSCs的各方面研究取得了很大的进展,效率也从最初的6.6%提高到现在的15.9%。 本综述将系统地介绍C-PSCs的最新研究进展,包括器件结构和工作原理、各部分研究进展(电子传输层、钙钛矿薄膜和碳电极),以及存在的问题和解决方案。     

低成本富勒烯衍生物电子传输层在钙钛矿太阳能电池的应用（英文）

有机无机杂化钙钛矿太阳能电池(PSCs)近几年吸引了众多的关注。目前,在反式平板异质结钙钛矿太阳能电池中,最普遍使用的电子传输层材料是富勒烯衍生物PCBM,但是由于其价格昂贵,将会影响钙钛矿太阳能电池的最终产业化。本文开发出一种新的低成本富勒烯衍生物N-甲基-2-戊基[60]富勒烯吡咯烷(NMPFP)来取代PCBM,用于反式钙钛矿太阳能电池的电子传输层。和PCBM电子传输层相比,NMPFP具有更快的电子传输速率。用NMPFP制作的钙钛矿太阳能电池几乎没有迟滞现象,取得了13.83%的光电转换效率,和PCBM电池性能相当。而且,由于NMPFP更强的疏水性,其电池的稳定性优于PCBM电池。本研究表明NMPFP是一种非常有前景的电子传输材料,用于反式平板钙钛矿太阳能电池,可以有效的取代PCBM。     

反式p-i-n结构钙钛矿太阳能电池

近年来,有机无机杂化金属卤化物钙钛矿太阳能电池的光电转换效率从最初3.8%提升到现在的21.0%.快速的效率提升主要得益于钙钛矿材料本身的光电特性—适宜的直隙半导体禁带宽度、较低的激子束缚能、较高的摩尔消光系数、优良的载流子双极性扩散特性.然而,高效率钙钛矿太阳能电池的器件稳定性和迟滞效应现象仍未得到很好的改善,是当前急需要解决的挑战性难题.本文首先回顾了钙钛矿太阳能电池的发展历程和器件结构的演变,结合本课题组在反式p-i-n结构钙钛矿太阳能电池方面的研究进展,试图阐明一些由电池结构带来的本质性差异和一些设计实现钙钛矿太阳能电池高效率、高稳定性、消除迟滞效应的普遍规律.着重总结了基于聚(3,4-亚乙二氧基噻吩)-聚(苯乙烯磺酸)(PEDOT:PSS)基与NiO基两类p型空穴传输材料的反式结构钙钛矿电池方面的代表性研究进展.     

钙钛矿太阳能电池中小分子空穴传输材料的研究进展

有机-无机钙钛矿太阳能电池(PSCs)从2009年低于5%的能量转换效率到现在经过认证的超过22%的效率,成为科研热点和最有希望商业化的新型太阳能电池。在高性能的PSCs中,空穴传输材料是关键的一环,起到从钙钛矿活性层材料到对电极有效抽取和传输空穴的作用。本文在现有研究成果的基础上,对有机分子空穴传输材料在PSC中的应用进行总结,并强调分子材料结构对PSC器件性能(效率和稳定性)的影响。     

界面钝化策略:提高钙钛矿太阳能电池的稳定性

近年来,新兴起的有机无机杂化钙钛矿太阳能电池突飞猛进,在短短十年里其光电转化效率从3.8%迅速发展到目前25.2%的认证效率,被视为最具有应用潜力的新型高效率太阳能电池之一。虽然钙钛矿太阳能电池具有很高的光电转换效率已与多晶硅薄膜电池相媲美,但是电池的长期稳定性仍是阻碍其商业化的一大挑战。钙钛矿表面和晶界存在大量的缺陷,界面钝化来提高钙钛矿太阳能电池的稳定性是非常重要且有效的策略。二维钙钛矿材料是有机胺层与无机层交替的层状钙钛矿,具有体积较大的有机铵阳离子,与传统的三维钙钛矿材料相比对于环境的稳定性较好,并且结构灵活可调,在三维钙钛矿表面修饰二维钙钛矿层钝化缺陷,在提高钙钛矿太阳能电池效率的同时又保证了稳定性,另外,合适的钝化剂分子也能够非常有效地钝化缺陷。本文总结了钙钛矿太阳能电池的不稳定因素,归纳了钙钛矿太阳能电池界面钝化方面的研究进展,指出了二维钙钛矿材料发展的巨大潜力以及寻找合适钝化剂分子的原则,期望能够为获得高性能的钙钛矿太阳能电池进而实现商业化提供有益的指导。     

Direct C−H Arylation Meets Perovskite Solar Cells: Tin‐Free Synthesis Shortcut to High‐Performance Hole‐Transporting Materials

In contrast to the traditional multistep synthesis, we demonstrate herein a two‐step synthesis shortcut to triphenylamine‐based hole‐transporting materials (HTMs) through sequential direct C?H arylations. These hole‐transporting molecules are fabricated in perovskite‐based solar cells (PSCs) that exhibit promising efficiencies up to 17.69 %, which is comparable to PSCs utilizing commercially available 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the HTM. This is the first report describing the use of step‐saving C?H activations/arylations in the facile synthesis of small‐molecule HTMs for perovskite solar cells.     

左旋多巴和N,N-二甲基亚砜共掺杂PEDOT:PSS作为空穴传输层的高性能p-i-n型钙钛矿太阳能电池

在p-i-n型的钙钛矿太阳能电池中,聚3, 4-乙烯二氧噻吩：聚苯乙烯磺酸盐(PEDOT:PSS)作为最常用的空穴传输层(HTL)材料之一,由于其存在着吸湿性强以及能级与钙钛矿层不匹配等缺点,限制了它的应用。基于此,本文拟采用将左旋多巴(DOPA)和N, N-二甲基亚砜(DMSO)共同掺杂于PEDOT:PSS作为HTL的简单方法制备高性能p-i-n型钙钛矿太阳能电池。研究结果表明,DOPA和DMSO共掺杂PEDOT:PSS可以有效的调节HTL的能级并提高其导电性,器件的能量转化效率由13.35%显著提高到了17.54%。进一步研究发现,相比于未掺杂或单一掺杂的PEDOT:PSS,在DOPA和DMSO共掺杂的PEDOT:PSS上更有利于生长大尺寸、高结晶度的钙钛矿晶体;同时稳态/瞬态荧光和交流阻抗测试表明器件的内部载流子分离和传输更加有效。     

Porphyrin Supramolecule as Surface Carrier Modulator Imparts Hole Transporter with Enhanced Mobility for Perovskite Photovoltaics

Modulating the surface charge transport behavior of hole transport materials (HTMs) would be as an potential approach to improve their hole mobility, while yet realized for fabricating efficient photovoltaic devices. Here, an oxygen bridged dimer-based monoamine Fe^III porphyrin supramolecule is prepared and doped in HTM film. Theoretical analyses reveal that the polaron distributed on dimer can be coupled with the parallel arranged polarons on adjacent dimers. This polaron coupling at the interface of supramolecule and HTM can resonates with hole flux to increase hole transport efficiency. Mobility tests reveal that the hole mobility of doped HTM film is improved by 8-fold. Doped perovskite device exhibits an increased efficiency from 19.8 % to 23.2 %, and greatly improved stability. This work provides a new strategy to improve the mobility of HTMs by surface carrier modulation, therefore fabricating efficient photovoltaic devices.     

Minimization of Carrier Losses for Efficient Perovskite Solar Cells through Structural Modification of Triphenylamine Derivatives

Three hole transport materials (HTMs) based on a substituted triphenylamine moiety have been synthesized and successfully employed in triple‐cation mixed‐halide PSCs, reaching efficiencies of 19.4 %. The efficiencies, comparable to those obtained using spiro‐OMeTAD, point them out as promising candidates for easily attainable and cost‐effective alternatives for PSCs, given their facile synthesis from commercially available materials. Interestingly, although all these HTMs show similar chemical and physical properties, they provide different carrier recombination kinetics. Our results demonstrate that is feasible through the molecular design of the HTM to minimize carrier losses and, thus, increase the solar cell efficiencies.     

Hole transport in triphenylamine based OLED devices: from theoretical modeling to properties prediction

For the series of para-substituted triphenylamines, optimized geometries, HOMO and LUMO energy levels, ionization potentials Ip, reorganization energies for hole transport λ(+), and frontier orbital contours have been calculated by means of ab initio computations. Relationships between them and the Hammett parameter are presented. According to calculations, electron releasing substituents increase the HOMO and LUMO energies of TPA, while electron withdrawing ones decrease it. This behavior is reflected in subsequent decreasing and increasing of ionization potentials of substituted TPAs. Calculations show that there exists also a strong substituent effect on the reorganization energy λ(+), which is a dominating factor of hole mobility. It is concluded that proper tuning of the HOMO and LUMO levels (and, as a result, ionization potential, Ip) and reorganization energy λ(+) (consequently, hole mobility) of the triphenylamine can be done by alteration of the TPA electronic structure by an appropriate substitution. It is demonstrated that the proper adjustment of the HOMO levels of HTM facilitates the reduction of an energy barrier at the interface of ITO/HTL and HTL/EL and ensure the high hole injection and hole transport rate. On the other hand, appropriate adjustment of the LUMO level prevents an electron leak from the EL into the HTM layer. Results of these calculations can be useful in the process of designing new HTM materials of desired properties (high efficiency, stability, and durability).     

Semi‐Locked Tetrathienylethene as a Building Block for Hole‐Transporting Materials: Toward Efficient and Stable Perovskite Solar Cells

The construction of state‐of‐the‐art hole‐transporting materials (HTMs) is challenging regarding the appropriate molecular configuration for simultaneously achieving high morphology uniformity and charge mobility, especially because of the lack of appropriate building blocks. Herein a semi‐locked tetrathienylethene (TTE) serves as a promising building block for HTMs by fine‐tuning molecular planarity. Upon incorporation of four triphenylamine groups, the resulting TTE represents the first hybrid orthogonal and planar conformation, thus leading to the desirable electronic and morphological properties in perovskite solar cells (PSCs). Owing to its high hole mobility, deep lying HOMO level, and excellent thin film quality, the dopant‐free TTE‐based PSCs exhibit a very promising efficiency of over 20 % with long‐term stability, achieving to date the best performances among dopant‐free HTM‐based planar n‐i‐p structured PSCs.     

Inorganic p-type semiconductors and carbon materials based hole transport materials for perovskite solar cells

Incorporation of proper inorganic p-type semiconductors as hole transport layer has great potential to increase long-term stability while maintaining high power conversion efficiency of perovskite solar cells with low material cost.     

钙钛矿同质结太阳电池研究进展

钙钛矿太阳电池制备工艺简单,效率提升迅速,被认为是最具应用潜力的新一代光伏技术之一。近年来,大量研究表明,钙钛矿光电材料可以通过自掺杂或外源掺杂的方式实现薄膜导电类型(p型或n型)的定向调控;而具有双层薄膜结构的钙钛矿p-n同质结可以通过薄膜双沉积技术制备,这为钙钛矿同质结太阳电池的设计与制备提供了技术基础。新型钙钛矿同质结太阳电池摒弃传统的电子传输层和空穴传输层,可简化电池结构,不仅有利于提升电池工作稳定性,降低成本,更能进一步释放钙钛矿太阳电池在柔性和半透明应用中的潜力,推动钙钛矿电池的实用化进程。本文围绕钙钛矿同质结太阳电池,综述了钙钛矿光电材料p/n特性掺杂和钙钛矿同质结的研究进展,讨论了钙钛矿同质结太阳电池的基本结构和工作原理,并对其当前存在的技术问题和应用前景进行了总结与展望。     

4-Tert-butylpyridine-assisted low-cost and soluble copper phthalocyanine as dopant-free hole transport layer for efficient Pb- and Sn-based perovskite solar cells

The preparation of suitable hole transport material(HTM) is critical to the performance and stability of perovskite solar cells(PSCs) with low-cost. Herein, a mass producible and soluble copper phthalocyanine decorated with butoxy donor groups(CuPcOBu) was designed as HTM and prepared by a facile two-step synthetic route. To generate high quality HTM film, 4-tertbutylpyridine(tBP) was doped into CuPc-OBu to prepare the film and then removed by annealing. Such a t BP-assisted strategy resulted in the best efficiency of the PSCs with lead trihalide perovskite up to 19.0%(small-area of 0.1 cm~2) and 10.1%(the active area of 8.0 cm~2 for the module device). And the best efficiency of the tin-based PSCs with CuPc-OBu reached to 6.9%.More importantly, the device with CuPc-OBu as HTM revealed the remarkably enhanced stability. This work provides a new strategy to improve the film-quality of free-doping HTMs and enhance the efficiency and stability of Pb-and Sn-based PSCs with low-cost.