基于2,5-二溴对苯二甲酸配体的锌/钴配合物合成、晶体结构及性质

将有机物2,5-二溴对苯二甲酸(H₂L₁)和2,2′-联吡啶(L₂)作为双配体,使用溶剂热法和七水合硫酸锌(ZnSO₄·7H₂O)、六水合硝酸钴(Co(NO₃)₂·6H₂O)分别反应,得到配合物[Zn(L₁)(L₂)(H₂O)]_n(1)和配合物[Co(L₁)(L₂)(H₂O)]_n(2)。采用单晶X射线衍射、元素分析、红外光谱、紫外光谱、荧光光谱、热重分析等测试方法对这两种物质进行分析研究。单晶测试结果表明配合物1是单斜晶系,以Zn²⁺配位连接L^2-₁与L₂形成一维链状结构,各条链在分子间氢键和π…π共轭作用下有规律地堆叠形成三维网络结构。配合物2是三斜晶系,Co1离子和Co1ⁱ离子由H₂L₁上的羧酸氧原子O4和O4ⁱ连接,形成双齿螯合的配位结构单元,以Co²⁺配位连接 L^2-₁和L₂形成二维网格结构,各层在O—H…O分子间氢键和范德瓦耳斯力作用下有规律的堆叠形成三维网络结构。配合物1和2均含有芳香杂环、羧基杂环和氮杂环,具有良好的荧光性质和热稳定性,最大发射波长分别为345 nm和333 nm。     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。     

Growth of SnO2 nanoparticles via thermal evaporation method

Tin oxide (SnO₂) nanoparticles were fabricated by evaporation of Sn powers at 1000 °C in air pressure. The as-deposited SnO₂ particles were single crystal structure, which were mostly spherical shape, the diameter of particles was ranging from 200 to 600 nm. The photoluminescence (PL) spectrum showed that a sharp emission peak at around 393 nm with the excitation wavelength at 325 nm, which suggested possible applications in nanoscaled optoelectronic devices. It was also found that the holding time affects the morphology of the products. The formation mechanism of SnO₂ particles was discussed.     

秸秆燃烧排放PM2.5特征及影响因素研究

生物质燃烧向大气中排放大量颗粒污染物, 在中国, 收获季节大量秸秆被直接露天燃烧处理, 对区域环境质量和人体健康造成严重影响. 对我国最主要的两种粮食作物玉米和小麦秸秆的露天燃烧进行模拟, 分析颗粒物排放水平, 特征及影响因素. 玉米和小麦秸秆燃烧PM_2.5排放因子分别为1082.8和835.7~897.3 mg/kg. 有机物是颗粒物最主要组分, 总量占PM_2.5质量的42%~66%. Cl^-和K⁺分别占PM_2.5总质量的4%~15%和2%~14%, K⁺/EC值为0.5~3.8. 各物种在颗粒物中所占比例与之前研究结果一致. 秸秆含水量和燃烧温度影响PM_2.5排放水平和组成特征. 随秸秆含水量增加, PM_2.5和OC的排放因子增加; 秸秆含水量增加, 燃烧温度逐渐降低, 由生物质燃料释放进入烟气中的K⁺和Cl^-比例逐渐减小导致二者在颗粒物中的比例降低. 我国每年由玉米和小麦秸秆露天燃烧排放的PM_2.5和OC分别为92.7 Gg和47.5 Gg, 在总量中占重要比例.     

Nonradiative Excited-State Decay via Conical Intersection in Graphene Nanostructures

Chemical groups are known to tune the luminescent efficiencies of graphene-related nanomaterials, but some species, including the epoxide group (−COC−), are suspected to act as emission-quenching sites. Herein, by performing nonadiabatic excited-state dynamics simulations, we reveal a fast (within 300 fs) nonradiative excited-state decay of a graphene epoxide nanostructure from the lowest excited singlet (S₁) state to the ground (S₀) state via a conical intersection (CI), at which the energy difference between the S₁ and S₀ states is approximately zero. This CI is induced after breaking one C−O bond at the −COC− moiety during excited-state structural relaxation. This study ascertains the role of epoxide groups in inducing the nonradiative recombination of the excited electron-hole, providing important insights into the CI-promoted nonradiative de-excitations and the luminescence tuning of relevant materials. In addition, it shows the feasibility of utilizing nonadiabatic excited-state dynamics simulations to investigate the photophysical processes of the excited states of graphene nanomaterials.     

PM2.5 in an industrial district of Zhengzhou,China:Chemical composition and source apportionment

Zhengzhou is a developing city in China,that is heavily polluted by high levels of particulate matter.In this study.fine particulate matter(PM_2.5) was collected and analyzed for their chemical composition（soluble ions,elements,elemental carbon（EC） and organic carbon（OC）） in an industrial district of Zhengzhou in 2010.The average concentrations of PM_2.5 were 181,122,186 and 211μg/m³ for spring,summer, autumn and winter,respectively,with an annual average of 175μg/m³,far exceeding the PM_2.5 regulation of USA National Air Quality Standards（15μg/m³）.The dominant components of PM_2.5 in Zhengzhou were secondary ions（sulphate and nitrate） and carbon fractions.Soluble ions,total carbon and elements contributed 41%,13%and 3%of PM_2.5 mass,respectively.Soil dust,secondary aerosol and coal combustion, each contributing about 26%,24%and 23%of total PM_2.5 mass,were the major sources of PM_2.5,according to the result of positive matrix factorization analysis.A mixed source of biomass burning,oil combustion and incineration contributed 13%of PM_2.5.Fine particulate matter arising from vehicles and industry contributed about 10%and 4%of PM_2.5,respectively.     

Fabrication of nano-sized Ca(OH)2 with excellent adsorption ability for N2O4

Uniform nano-sized calcium hydroxide (Ca(OH)₂) monocrystal powder was synthesized from calcium oxide in a surfactant solution via a digestion method by decreasing the surface tension of the reaction system to control the growth of crystalline Ca(OH)₂. The Ca(OH)₂ monocrystal powder samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Fourier transform-infrared spectroscopy (FT-IR). The NO_x adsorption ability of the samples was evaluated, and the influence of various types and concentrations of surfactants on powder agglomeration and then the specific surface area in the precipitation process were studied. The specific surface area of the samples was found as high as 58 m²/g and 92 m²/g and the particle size, 300–400 nm and 200–300 nm in the presence of 10 wt% PEG600 and 0.086 mL/L SDS at a reaction time of 5 h, respectively. The product has an exceptionally strong adsorption ability for NO_x, which makes it a highly promising adsorbent for emission control and air purification.     

Ultra‐thin (002)‐oriented Al‐doped zinc oxide transparent electrode grown on oxygen‐controlled homo‐seed layer

Highly (002)‐oriented Al‐doped zinc oxide (AZO) thin films with the thickness of less than 200 nm have been deposited on an oxygen‐controlled homo‐seed layer at 200 °C by DC magnetron sputtering. With the homo‐seed layer being employed, the full‐width at half maximum (FWHM) of the (002) diffraction peak for the AZO ultra‐thin films decreased from 0.33° to 0.22°, and, the corresponding average grain size increased from 26.8 nm to 43.0 nm. The XRD rocking curves revealed that the AZO ultra‐thin film grown on the seed layer deposited in atmosphere of O₂/Ar of 0.09 exhibited the most excellent structural order. The AZO ultra‐thin film with homo‐seed layer reached a resistivity of 4.2 × 10^–4 Ω cm, carrier concentration of 5.2 × 10²⁰ cm^–3 and mobility of 28.8 cm² V^–1 s^–1. The average transmittance of the AZO ultra‐thin film with homo‐seed layer reached 85.4% in the range of 380–780 nm including the substrate. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

盐湖卤水中微量钒的浓度测定

为了测定盐湖卤水中微量钒的浓度,开发了一个钒的分离纯化流程来降低大量的共存离子的基质效应。该分离纯化流程包括萃取和反萃两个步骤。详细地研究了影响钒纯化效率的各种因素,得到钒的最佳分离纯化条件为:以正己烷为稀释剂,有机相中D2EHPA和TBP的体积百分比分别为30%及20%,在pH为3.0时萃取30 min;然后用3 mol/L H₂SO₄反萃 10 min。基于此分离纯化流程,将两个实际盐湖卤水样品中的微量钒纯化后,再用电感耦合等离子体质谱仪(ICP-MS)测定其浓度,该ICP-MS对51V 的检测灵敏度和检测限别为53 171 cps/(μg/L) 和1.88 ng/L。所得实际盐湖卤水钒测定结果的加标回收率接近100%而相对标准偏差低于0.6%,表明该方法可用于实际复杂体系中微量钒的浓度测定,例如海水和盐湖卤水。     

氢对GaAs薄膜的钝化作用

报导了射频磁控溅射与沉积气氛掺氢相结合制备单层(13~20 nm厚)高质量GaAs多晶态纳米薄膜的方法,研究了氢钝化对薄膜微观结构及光学性质的影响.对GaAs薄膜进行了X射线衍射、原子力显微镜、吸收光谱、光致荧光谱的研究分析.结果表明,衬底温度500℃的掺氢薄膜和520℃的薄膜呈面心立方闪锌矿结构，薄膜的晶团尺寸较大，微观表面较为粗糙，其吸收光谱出现了吸收边蓝移和明显的激子峰，带隙光致荧光峰强明显增加，说明氢在衬底温度500℃~520℃下对薄膜有重要的钝化作用.