Reactions in a Mixture of CH_4 and CO_2 under the Action of Microwave Discharge at Atmospheric Pressure

Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.     

Reactions in a Mixture of CH4 and CO2 under the Aciton of Microwave Discharge at Atmospheric Pressure

Reactions between CH4 and CO2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor,The main products were CO and H2,while acetylene and ethylene were also found in the products.Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst,Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.     

Purification of L-Lysine in Simulated Moving Bed and Fixed-Bed Chromatography

 L-Lysine was produced by a microbial process utilizing a Corynebacterium glutamicum (ATCC 21799) strain. L-Lysine was purified from the cultivated medium by fixed-bed and simulated moving bed （SMB） chromatography. The separation conditions including pH, eluent concentration and Lys+ and Lys2+ adsorption isotherms were studied in batch adsorption. The column capacity, eluent flow rate and eluent concentration have been studied in fixed-bed chromatography. Maximum purification rate of lysine was obtained as 0.066 g/(g·h) (per gram resin and per hour) at an eluent flow rate of 10 mL/min in fixed-bed chromatography. The results obtained from SMB were 0.11 g/(g·h) for L-lysine purification rate and 96% for L-lysine recovery.     

Optimization of process for the production of bio-oil from eucalyptus wood

The pyrolysis of eucalyptus wood was carried out in a batch reactor to optimize the yield of bio-oil.Effect of various parameters like feed(particle) size,temperature,presence of catalyst and heating rate on the yield of bio-oil was investigated.The optimum conditions for high yield of bio-oil are for the particle size 2 mm~5 mm(average l/d=12.84/2.03 mm) at 450 ℃ in high heating rate.The reaction kinetics and the quality of bio-oil produced are independent of the presence of different catalysts like mordenite,kaoline clay,fly ash and silica alumina.The physical properties like odour,colour,PH,viscosity,heating value were determined.The FT-IR analysis of bio-oil indicates the presence of different functional groups such as monomeric alcohol,phenol,ketones,aldehydes,carboxylic acid,amines,and nitro compounds.The composition of the bio-oil at different conditions was analyzed using GC-MS and found that the components are temperature dependent but independent of catalysts used.     

Effect of solvent on the free energy of activation of S_N2 reaction between phenacyl bromide and amines

The kinetics of SN2 reaction between phenacyl bromide and various amines in 12 different solvents were studied. Solvent effects on the rate of this reaction and free energy of activation, ΔG# , were interpreted by applying the Abraham-Kam-let-Taft (AKT) equation. UK solvent polarity (π1*), solvent hydrogen-bond basicity (β1) and Hildebrand cohesive density energy (δH2) are those parameters which increase the rate constant and decrease ΔG# , while solvent hydrogen-bond acidity (α1) will have the compensatory effect. A comparison among obtained values of second rate constants, k2, for different amines in a given solvent indicates that the amine reactivities are highly dependent on their structures. The consequent decrease of the rate constant for different amines in any given solvent was found to be: primary > secondary> tertiary. This order results from steric effects of amines.     

青霉素G钾盐对SDS水溶液物理化学性质的影响及其在SDS/n-C5H11OH/H2O体系中的释放

The effects of penicillin potassium salt （PenK） on the solubility, Krafft temperature TK, critical micelle concentration CMC of SDS micelle and the phase behavior of SDS/n-C5H11OH/H2O system were studied. The partial phase diagrams of SDS/PenK/H2O system at different temperatures were determined. The release amounts of PenK in SDS/n-C5H11OH/H2O system and the distribution coefficient of PenK between micelle and water were measured by UV-Vis spectroscopy. The results show that in the presence of PenK, the CMC of SDS was decreased while the TK of SDS was increased and the solubility of SDS in both water and SDS/n-C5H11OH/H2O oil in water （O/W） microemulsion was decreased, but increased in water in oil （W/O） microemulsion. SDS micelles and SDS/n- C5H11OH/H20 O/W microemulsion could accelerate the release rate of PenK. The addition of SDS and water could both increase the release rate of PenK, whereas the presence of n-C5H11OH reduced the release rate of PenK. The above results were related to the electrostatic repulsion between PenK and SDS.     

Studies of Electrochemical Catalytic Reduction Reactions of Tetraphenylporphinatocobalt/1,2-Dibromoethane and 1,2-Dichloroethane Systems in Nonaqueous Media

Electrochemical catalytic reactions of tetraphenylporphmatocobalt were studied in DMF and EtCl2 solutions in the presence of 1,2 dibroraoethane and 1,2-dichloroethane utilizing cyclic voltamme-try, thin-layer electrochemistry, in situ UV-visible spectroelectrochemistry and computer digital simulation methods. Homogeneous rate constants for reactions of electrogenerated Co(Ⅰ)TPP species with 1,2-dibro-moethane and 1,2-dichloroethane were determined as 1. 2×103 and 5 mol-1 · dm3 × s-1, respectively. Neither alkylation nor degradation of CoTPP was observed.     

The Adsorption and Photocatalytic Decomposition of Citric Acid on Pt/TiO_2

The adsorption and photocatalutic decomposition of citric acid on both Pt/TiO2 powder and n-TiO2 single crystal electrode were studied in aqueous solutions of various pH. It was found that citrate ions were chemisorbed on TiO2, which could increase the interfacial capacity and the filling factor of photocurrent-potential curves. The quantity of adsorption, slope of mott-Shottky plot and the rate of photocatalytic decomposition of citric acid were found to depend strongly on pH of solution. The phot ocatalytic decomposition of citric acid was discussed in light of its adsorption on TiO2.     

Effect of Chemical Treatment on TiO2 Particles by IMPS

The photodegradation reaction rate of CHCl3 in TiO2 particulate suspension was imperoved significantly by HCl-treatment.The effect of HCl-treatment on the photocatalytic activity of TiO2 was strdied in a PEC cell by using Intensity-Modulated Photocurrent Spectroscopy(IMPS).The magntude of photocurrent response and the characteristic frequencies of the upper and lower semicircles in the complex plane of IMPS response were analyzed,and the ccathodic and anodic reaction processes of photogenerated holes and electrons were discussed.The increases in the cathodic and anodic photocurrent response and in the time constants of both cathodic and anodic reaction processes of photogenerated holes and electrons were discussed.The increases in the cathodic and anodic photocurrent response and in the time constants of both cathodic and anodic reaction processes indicate that HCl-treatment leads to the improvement of the photocatalytic activity of TiO2 and a change of the photocatalytic kinetic mechanism.     

Syntheses of imidazolium-bridged cyclodextrin dimers and their catalytic properties in the hydrolytic cleavage of p-nitrophenyl alkanoates

Two imidazolium-bridged cyclodextrin dimers 3a and 3b were prepared by reacting 6-deoxy-6-N-imidazolyl-β-CD (2) with bis(bromomethyl)benzene. The catalytic properties of 2, 3a and 3b in the hydrolytic cleavage of p-nitrophenyl alkanoates, in the form of acetate (PNPA) , butanoate (PNPB) , hexanoate (PNPH) and octanoate (PNPO), were examined. CD dimeis showed middling rate enhancements around neutrality. Catalytic rate constants ( kc) in the presence of 3a or 3b did not vary much with chain length of esters. In contrast, dissociation constants ( Kd) and selectivity factors (kc/Kd) for "long-chain" esters were much smaller and significantly larger than those for short-chain ones respectively, indicating CD dimers 3a and 3b have good dimensional recognition ability and substrate selectivity in the hydrolytic cleavage of p-nitrophenyl alkanoates . Their kinetic consequences are briefly interpreted.     

Kinetic study of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al2O3 catalyst

The kinetics of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al2O3 catalyst were studied.Performance test runs were carried out in a fixed-bed integral reactor.Using a power-law rate expression for the surface reaction kinetics and independent law for deactivation kinetics,the experimental data were analyzed both by integral and a novel differential method of analysis and the results were compared.To avoid fluctuation of time-derivatives of conversion required for differential analysis,the conversion-time data were first fitted with appropriate functions.While the time-zero and rate constant of reaction were largely insensitive to the function employed,the rate constant of deactivation was much more sensitive to the function form.The advantage of the proposed differential method,however,is that the integration of the rate expression is not necessary which otherwise could be complicated or impossible.It was also found that the reaction is not limited by external and internal mass transfer limitations,implying that the employed kinetics could be considered as intrinsic ones.     

STUDIES ON VINYL POLYMERIZATION WITH INITIATION SYSTEM CONTAINING AMINE DERIVATIVES

Two main types of amine-containing initiation systems were studied in this work. In the case of MMA polymerization initiated by BPO-amine (DMT, DHET, DMA) redox systems, it was found that the polymerization rate and colour stability of the polymer for different amine systems were in the following order: DMT≈DHET>DMA. Accordingly, BPO-DMT and BPO-DHET are effective initiators. In the case of MEMA polymerization by amine (DMT, DHET, DMA) alone, it was found that the polymerization rate and the percentage of conversion for these different amine systems were in the following order: DMT≥DHET>DMA. The polymerization rate and the percentage of conversion also increased with the increase of DMT concentration. From the kinetic investigation the rate equation of R_P=K [DMT]~(1/2) [MEMA]~(3/2) was obtained, and the overall activation energy of polymerization was calculated to be 34.3 KJ/mol (8.2 Kcal/mol). Moreover, the polymerization of MEMA in the presence of DMT was strongly inhibited by hydroquinone, indicating the polymerization being free radical in nature. From these results, the mechanism of MEMA polymerization initiated by amine was proposed.     

AN INVESTIGATION ON KINETICS AND REACTIVE SPECIES IN ANIONIC TELOMERIZATION OF BUTADIENE INITIATED BY n-BUTYLLITHIUM/N, N, N'''', N''''-TETRAMETHYLETHYLENE DIAMINE

The polymerization rate of butadiene in toluene initiated by n-butyllithium and tetramethyl ethy-lene diamine as well as the micro-structure and degree of association of polybutadiene were deter-mined. The effect of TMEDA/n-BuLi (abbr. A/Li) and temperature on the polymerization rate,molecular weight, molecular weight distribution and structure of polybutadiene was investigated. Ac-tivation energy of the propagation reaction and chain transfer reaction, together with the chain trans-fer reaction rate constant were estimated. Kinetic parameters and contribution of different reactivespecies to polymerization rate were calculated by Nonlinear Least-Squares Method. A kinetic equa-tion was proposed. The mechanism of anionic chain transfer reaction was discussed.     

SOAPLESS EMULSION COPOLYMERIZATION IN THE PRESENCE OF BARIUM SULFATE POWDER

To investigate soapless emulsion copolymerization in the presence of a solid phase,copolymerization experiments were carried out for the styrene-butyl acrylate-K_2S_2O_8-watersystem by using barium sulfate powder,which is assumed to be chemically inert.Reactionconditions were varied with respect to barium sulfate powder quantity,initiator concen-tration and temperature.These factors were investigated with respect to the effect onreaction rate and conversion,polymer particle number and diameter,and latex stability.     

Magnetic field assisted Fenton reactions for the enhanced degradation of methyl blue

Magnetic field was tentatively introduced into Fenton reactions system for the degradation and discoloration of methyl blue as the represent of organic chemical dye,which was a bio-refractory organic pollutant in industry wastewater.It was found that under optimal Fenton reaction conditions,with the assistant of magnetic field in Fenton reactions,the degradation rate of methyl blue,the decomposition rate of H_2O_2 and the conversion rate of Fe~(2+)were accelerated,the extent of them would be improved by ...     

Investigation on Gas Storage in Methane Hydrate

The effect of additives (anionic surfactant sodium dodecyl sulfate (SDS), nonionic surfactantalkyl polysaccharide glycoside (APG), and liquid hydrocarbon cyclopentane (CP)) on hydrate inductiontime and formation rate, and storage capacity was studied in this work. Micelle surfactant solutions werefound to reduce hydrate induction time, increase methane hydrate formation rate and improve methanestorage capacity in hydrates. In the presence of surfactant, hydrate could form quickly in a quiescentsystem and the energy costs of hydrate formation were reduced. The critical micelle concentrations of SDS and APG water solutions were found to be 300x 10-6 and 500x 10-6 for methane hydrate formation systemrespectively. The effect of anionic surfactant (SDS) on methane storage in hydrates is more pronounced compared to a nonionic surfactant (APG). CP also reduced hydrate induction time and improved hydrateformation rate, but could not improve methane storage in hydrates.     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

Kinetic study of oxidative coupling of methane over Mn and/or W promoted Na_2SO_4/SiO_2 catalysts

A comprehensive kinetic model for oxidative coupling of methane(OCM)over Mn and/or W promoted Na2SO4/SiO2 catalysts was developed based on a micro-catalytic reactor data.The methane conversion and ethylene,ethane,carbon monoxide and carbon dioxide selectivities were obtained in a wide operating condition range of 750 - 825-C,CH4/O2=2.5 - 10 and contact time=267 - 472 kg s m-3.Reaction networks of six models with different rate equation types were compared together.The kinetic rate parameters of each reaction network were estimated using linear regression or genetic algorithm optimization method(GA).A reaction network suggested by Stansch et al.for OCM was found to be the best one and was further used in this work.The suggested model could predict the experimental results of OCM reaction within a deviation range of ± 20%.     

Degradation of Microcystin-RR by Combination of UV/H2O2 Technique

The experiments were performed to investigate the degradation of microcystins in order to assess the effectiveness and feasibility of UV/H2O2 system for the disinfection of water polluted by microcystins. The influence factors such as H2O2, pH and UV light intensities were investigated respectively. Degradation of microcystin-RR （MC-RR） could be fitted by either the pseudo-first-order or second-order rate equations. This homogenous system could significantly enhance the degradation rate due to the synergetic effect between UV and H2O2. The degradation mainly followed the mechanism of direct photolysis and .OH oxidation reactions. Experimental results showed that 94.83% of MC-RR was removed under optimal experimental conditions and the UV/H2O2 system provided an alternative to promote the removal of microcystins in drinking water supplies.     

Photoinduced intermolecular and intramolecular actions between eosin and porphyrin

Two dyads of eosin and porphyrin linked with a semi-rigid (-CH2phCH2-) or flexible (-(CH2)4-) bridge and their reference model compounds were synthesized and characterized The intermoleccular interaction and intramolecular photoinduced singlet energy transfer and electron transfer were studied by their absorp tion spectra,fluorescence emission,excitation spectra and fluorescence lifetime The model compounds,ethyl ester of eosm (EoEt) and porphyrin (PorEt),could form complexes in the ground state.When the eosin moieties in dyads were excited,they could transfer some singlet energy to the porphyrins; in the meantime,they could also ndsce electron transfer between two chromophores.Exciting the porphyrin moieties in dyads could induce electron transfer from eosin moieties to porphyrin moieties.The efficiencies (EnT,ET) and rate constants (kEnT,kET) were related to the polarity of solvents and mutual orientation of the two chromophores in dyads.