以催化油浆窄馏分为添加剂的A1—MCM—41分子筛的合成

采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al-MCM-41介孔分子筛，并利用XRD，HREM，TG-DTA及N2吸附-脱附等测试手段对合成样品进行了表征．合成的Al-MCM-41分子筛的比表面积和孔体积分别达到1295m^2／g和1．5cm^3/g，其平均孔径为4．3nm．重点研究了Al-MCM-41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

MFI分子筛前驱体对Y型沸石分子筛表面的修饰及其催化性质

间、对-甲基异丙苯是生产间、对-苯酚的反应中间体,因此其制备受到国内外广泛关注．ZSM-5,Y型,betn等沸石分子筛和掺杂zn的Al-MCM-41介孔分子筛在此反应中表现出不同的择形性．近年来利用沸石分子筛前驱体自组装技术合成的新型介孔材料已显示出优异的催化性能,     

混合阳离子-非离子表面活性剂为模板剂合成含沸石次级结构单元的介孔分子筛

利用混合阳离子-非离子表面活性剂为模板剂采用两步晶化法合成了孔壁具有沸石次级结构单元的介孔分子筛，通过XRD、N2吸附-脱附、FT-IR以及异丙苯裂解探针反应等手段对样品进行了表征。结果表明，合成的介孔材料在结构上与相应的M41S材料类似，无微孔沸石相的存在。立方介孔材料具有较高的热稳定性和水热稳定性，在催化异丙苯裂解反应中，六方介孔材料的催化活性明显高于相似条件下用单一表面活性剂为模板剂合成的含沸石次级结构单元的六方介孔材料。     

以微孔β沸石为硅铝源合成强酸性介孔分子筛

以微孔β沸石为硅铝源,通过碱处理和以十六烷基三甲基溴化铵为模板剂,合成了具有较强酸性的六方结构介孔分子筛材料B-MCM-41,并采用XRD、N₂吸附脱附、FT-IR、²7Al MAS NMR、HRTEM和水热处理等手段对其进行了结构表征,采用NH₃-TPD对其进行了酸性表征。实验结果表明,B-MCM-41具有明显强于常规介孔分子筛的酸性,且在C⁺₁0混合芳烃加氢脱烷基化反应中表现出了良好的催化性能。这主要是由于碱溶液将β沸石降解为沸石结构单元,在表面活性剂作用下五元环次级结构单元被引入了介孔铝硅酸盐B-MCM-41的结构。     

硅铝基微孔/介孔复合分子筛的制备与应用

本文对具有多级孔道和双重酸性的硅铝基微孔/介孔复合分子筛的制备及应用进展进行了评述,重点讨论了微孔沸石晶体结构的存在对产物酸性、结构稳定性的贡献,强调了制备途径对合成微孔/介孔功能复合材料的简捷性、有效性,探讨了此类催化材料的发展前景。     

含有沸石结构单元体介孔材料的合成及催化性能

采用两步晶化法合成了孔壁含沸石初级结构单元的六方介孔材料,用XRD, N_2吸附－脱附,TEM,IR和NH_3TPD对样品进行了表征,考察了晶化时间、碱度、 温度和NH_4~+离子交换对样品的影响。结果表明合成的介孔材料（AlMB41）在结构 上和AlMCM-41类似,并且没有发现β沸石相的存在。样品具有较高的热稳定性。氢 型AlMB41用有强酸位,在催化异丙苯裂解和2,4－二叔丁基苯酚与叔丁醇的烷基化 反应中,其催化活性明显高于常规法合成的AlMCM-41。     

由沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的新型介孔分子筛材料

 人们合成了一系列介孔分子筛材料，并发现它们在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有很大的潜在应用价值．但是，介孔分子筛材料相对于微孔沸石分子筛存在着两个致命弱点：较低的水热稳定性和较不活泼的催化活性中心．这两个弱点大大地影响了介孔分子筛在催化反应中的广泛应用．本文系统地综述了最近几年利用沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的介孔分子筛材料的研究进展．这包括利用硅铝沸石纳米粒子自组装制备具有强酸性和水热稳定的新型介孔硅铝分子筛材料，利用钛硅沸石纳米粒子自组装制备具有高催化氧化活性中心和水热稳定的新型钛硅介孔分子筛材料，以及利用含有不同杂原子的沸石纳米粒子自组装制备一系列水热稳定的新型介孔分子筛催化材料．     

中孔分子筛Al/SO42-/Al-MCM-41的合成、表征及催化性能

分别用H2SO4和Al2(SO4)3对中孔分子筛Al-MCM-41进行改性,得到了中孔分子筛SO42-/Al-MCM-41和Al/SO24-/Al-MCM-41。采用X射线多晶衍射(XRD)、红外光谱(FT-IR)、N2吸附-脱附和NH3程序升温脱附(NH3-TPD)等测试技术对样品的结构和表面酸性进行了表征。分别用Al-MCM-41、SO24-/Al-MCM-41和Al/SO24-/Al-MCM-41催化合成丙酸香叶酯,比较了三者的催化性能。结果表明,用Al2(SO4)3改性中孔分子筛Al-MCM-41,能得到仍保持着六方介孔结构的中孔分子筛Al/SO24-/Al-MCM-41,其酸性和催化性能比用H2SO4改性得到的SO24-/Al-MCM-41更强;用Al2(SO4)3改性不仅SO24-附着在了分子筛骨架上,而且Al也接枝在了分子筛骨架上。     

新型钴基介孔分子筛催化剂F-T合成性能和烃分布研究

采用介孔分子筛MSU－1，SBA－12和HMS为载体，制得含钴质量分数为15％的催化剂。在原料气V（H2）／V（CO）＝2．0，T＝473－513K,p=2.0MPa,GHSV=500H^-1的F－T合成条件下，反应活性依Co/HMS,Co/SBA-12,Co/MSU-1顺序降低，高碳烃（C19^ )选择性以Co/HMS最低；Co/MSU-1和Co／SBA-12催化剂介孔结构在反应中相对稳定，Co/HMS介孔结构在反应后完全塌陷。     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.