Co—Mo／C催化剂的O2吸附研究

浸渍法制备了一系列不同浸渍顺序，金属含量和Ｍｏ前区体的Ｃｏ／Ｍｏ／Ｃ催化剂并用脉冲色谱法测定了催化剂的Ｏ２吸附量，考察了催化剂制备，金属担载量，预处理条件，Ｏ２吸附温度，Ａｒ吸扫温度等参数对Ｏ２吸附量的影响。常压微型反应器上测定了催化剂的噻吩加氢脱硫活性。     

TiO2调变对MoO3／γ—Al2O3和CoO—MoO3／γ—Al2O3催化性能的影响

采用气相流动吸附法制备ＴｉＯ２／γ－Ａｌ２Ｏ３复合载体，用浸渍法其担载一定量的ＭｏＯ３或ＣｏＯ－ＭｏＯ３。用ＸＲＤ、ＬＲＳ和ＴＰＲ等技术，考察了Ｍｏ或Ｃｏ－Ｍｏ催化剂的表面结构和还原性能，并有和中压固定床反应装置测定催化剂的噻吩加氢脱硫和环己烯加氢的活性。     

二苯并噻吩在负载型CoMoNx/γ-Al2O3催化剂上的加氢脱硫

用浸渍法制备出β－Ａ１２Ｏ３负载不同Ｃｏ／（Ｃｏ＋Ｍｏ）比的ＣｏＭｏ氧化物,以其作为前驱体,在Ｎ２－Ｈ２混合气体中程序升温反应,合成出一系列ＣｏＭｏＮｘ／β－Ａ１２Ｏ３催化剂催化ＤＢＴ的脱硫作为模型反应,评价了催化剂的催化活性和选择性。研究表明,ＣｏＭｏＮｘ／β－Ａ１２Ｏ３催化剂催化ＤＢＴ的脱硫有两条途径：一是直接氢解脱硫,产物为联苯;另一途径是ＤＢＴ上的苯环先加氢然后脱硫,主要产物是环己基苯。中     

超细Mo／Al_2O_3催化剂（Ⅰ）──催化及还原性质研究

研究两种不同制备方法──浸渍法和超临界流体干燥法制得的超细Ｍｏ／Ａｌ２Ｏ３催化剂的加氢与加氢脱硫催化性质及还原性质，并与以普通Ａｌ２Ｏ３作载体制得的Ｍｏ／Ａｌ２Ｏ３催化剂相比较．结果表明，超细粒子催化剂催化性质较大程度地受制备方法的影响．ＴＰＲ、ＸＲＤ、ＬＲＳ分析结果表明，超细氧化铝载体和超临界流体干燥法的使用均有利于Ｍｏ在Ａｌ２Ｏ３表面的分散．     

不同方法制备的Cu-Co低碳醇合成催化剂的比较研究:I.吸附态CO的红外光谱

本文并行考察了用溶剂化金属原子分散（ＳＭＡＤ）、浸渍、共沉淀三种方法制备的Ｃｕ－Ｃｏ催化剂的一氧化碳加氢反应（５６３Ｋ，６ＭＰａ，Ｈ２／ＣＯ＝２）性能及附态ＣＯ的红外光谱。结果表明：（１）三种催化剂上反应产物均为Ｃ１－Ｃ５正构醇及正构烃，总醇的选择性依下列次序增：ＳＭＡＤ＜浸渍＜共沉淀。（２）表面低配位钴中心上多重吸附态ＣＯ的红外吸收峰的面积分数，对不同催化剂的变化规律，与醇选择性的变化一致；（３     

钌系双组分催化剂上α,ω—二元羧酸单酯加氢合成ω—羟基羧酸酯的研究

在小型高压反应釜中，研究了钌系双组分催化剂对α，ω－二元羧酸单酯加氢生成ω－羟基羧酸酯的催化性能，结果表明，Ｒｕ－Ｒｅ及Ｒｕ－Ｍｏ双组分催化具有良好的催 氢性能，α，ω十五一酸单甲酯在Ｒｕ－Ｒｅ以及Ｒｕ－Ｍｏ双组分催化剂另氢，生成ω－羟基十五烷酸甲酯的收率分别为８９．０％和７１．０％，反应温度对α，ω二元羧酸单酯加氢生成ω－羟基羧酸酯的收率有较大的影响。     

不同方法制备的Cu－Co低碳醇合成催化剂的比较研究Ⅰ．吸附态CO的红外光谱

本文并行考察了用溶剂化金属原子分散（ＳＭＡＤ）、浸渍、共沉淀三种方法制备的Ｃｕ－Ｃｏ催化剂的一氧化碳加氢反应（５６３Ｋ，６ＭＰａ，Ｈ２／ＣＯ＝２）性能及吸附态ＣＯ的红外光谱．结果表明：（１）三种催化剂上反应产物均为Ｃ１－Ｃ５正构醇及正构烃，总醇的选择性依下列次序递增：ＳＭＡＤ＜浸渍＜共沉淀；（２）表面低配位钻中心上多重吸附态ＣＯ的红外吸收峰的面积分数，对不同催化剂的变化规律，与醇选择性的变化一致；（３）高温还原和焙烧均使醇选择性下降，同时使表面低配位Ｃｏ０中心减少．据此讨论了ＣＯ插入中心，活性结构及制备方法的影响．     

Co—Mo／Al2O3型重整预加氢催化剂的研制

考察了不同方法制备的Ｃｏ－Ｍｏ／Ａｌ２Ｏ３型重整预加氢催化剂对石油加氢脱硫活性的影响，选出了一种工业生产步骤简单，金属含量容易控制，并且不腐蚀设备的碱必等量共浸法制备的ＤＳ－９４８催化剂。该催化剂在温度３５０℃，压力３．０ＭＰａ，液体空速６．０ｈ＾－１，体积氢油比７０的条件下，满足了双金属重整催化剂对精制石油脑油杂质含量的要求。     

不同方法制备的Cu-Cr/γ-Al2O3的结构及其对糠醛加氢制2-甲基呋喃反应的催化性能

 利用普通浸渍法、共沉淀法和溶剂化金属原子浸渍法制备了一系列Cu－Cr／γ－Al2O3催化剂，并用X射线衍射、扫描电镜、透射电镜和X射线光电子能谱等技术对这些催化剂进行了表征．结果表明，不同方法制备的催化剂的金属粒度的顺序为溶剂化金属原子浸渍法＜共沉淀法＜普通浸渍法；金属还原程度的顺序为溶剂化金属原子浸渍法＞普通浸渍法≈共沉淀法．糠醛加氢反应实验结果表明，催化活性顺序为溶剂化金属原子浸渍法＞普通浸渍法＞共沉淀法；生成2－甲基呋喃选择性顺序为共沉淀法＞普通浸渍法＞溶剂化金属原子浸渍法．     

二苯并噻吩在CoMoNx催化剂上的加氢脱硫

以ＭｏＯ３及沉淀法制得的ＣｏＭｏ氧化物为前驱体,在Ｎ２－Ｈ２混合气中用程序升温反应制得一系列氮化（钴）钼催化剂;用二苯并噻吩加氢脱硫为模型反应,考察了催化剂的催化性能。结果表明：⑴二苯并噻吩在氮化钼催化剂上的加氢脱硫有两条反应途径,即噻吩环直接氢解加氢脱硫;苯环先加氢,然后噻吩环氢解脱硫。⑵氮化钼有高的活性和选择Ｃ—Ｓ键断裂生成联苯的选择性,Ｃｏ的加入明显提高了氮化钼的催化活性。⑶不同预处理条件对     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.