双晶型TiO2薄膜的低温制备及表征

采用溶胶-凝胶法低温制备了具有锐钛矿、板钛矿双晶型的TiO2薄膜. 分别利用X射线衍射(XRD)、透射电子显微镜(TEM)、UV-Vis透光率曲线和原子力显微镜(AFM)等手段对所得TiO2溶胶和薄膜进行了性能表征. 采用光催化降解罗丹明B水溶液评价TiO2薄膜的光催化活性. 结果发现, 所得TiO2薄膜具有较高的透明度和光催化活性. 同时, 考察了溶胶回流温度对所制备TiO2薄膜性能的影响, 发现升高溶胶回流温度可以完善薄膜的晶型, 增大薄膜的粗糙度, 从而提高薄膜的光催化活性. 溶胶回流温度为100 ℃时所制备的TiO2薄膜具有最高的光催化活性.     

溶胶-凝胶法制备Tb-PDA/PVA薄膜及其荧光性能

采用溶胶-凝胶法制备了铽(Ⅲ)-吡啶-2,6-二羧酸/聚乙烯醇(Tb-PDA/PVA)发光薄膜,其结构经IR,差热分析,原子力显微镜及荧光光谱表征.分析结果表明:薄膜表面平整,PVA中的纳米Tb-PDA(平均粒径为90 nm)分散均匀,在270 ℃以下具有良好的热稳定性.在紫外光照射下,薄膜发出较强的绿色荧光,最大发射峰位于544 nm,归属于Tb3+的5D4→7F5跃迁.     

利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.     

采用一锅法制备量子点/琼脂纳米复合凝胶

以天然高分子琼脂为稳定剂,采用简单便捷的一锅法制备Mn掺杂ZnS量子点/琼脂纳米复合凝胶,琼脂不仅作为制备量子点的稳定剂,同时也是纳米复合凝胶的主要成分。对该纳米复合凝胶中量子点的化学结构和尺寸大小进行了表征,并对纳米复合凝胶的荧光性能和凝胶性能进行了研究。实验结果表明,制备得到的纳米复合凝胶均一稳定,在302 nm紫外光下呈现十分明显的橙红色荧光。在该纳米复合凝胶的透射电子显微镜（TEM）表征中可以观察到大小比较均一、粒径为3 nm左右的纳米粒子,光谱分析结果进一步证实纳米复合凝胶中存在Mn掺杂ZnS量子点。该纳米复合凝胶不仅具有良好的荧光性能,还具有温度刺激响应性可逆溶胶-凝胶转变性能,同时具有较高的溶胶转变温度和较好的温度稳定性。利用这些性能特点,可以方便地制备纳米复合凝胶小球。此外,该纳米复合凝胶还可以被潜在应用于金属离子的荧光检测分析领域。     

二氧化钛/聚乙烯吡咯烷酮纳米复合薄膜的制备与表征

采用溶胶-凝胶法(so1 gel)制备了TiO2/聚乙烯吡咯烷酮(PVP)有机 无机纳米复合薄膜.采用扫描电子显微镜、接触角测定仪、红外光谱仪、紫外 可见吸收光谱仪和静 动摩擦系数测定仪对所制备的TiO2/PVP纳米复合薄膜进行了结构表征和性能研究.结果表明:所制备的TiO2/PVP纳米复合薄膜表面平整光滑、无裂纹、具有一定的疏水性、良好的透明性、防紫外线性能和减摩抗磨性能.     

Bi_2MoO_6/BiVO_4异质结的水热合成和可见光催化活性(英文)

采用一步水热法制备Bi2MoO6/BiVO4复合光催化剂.利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征.结果表明,Bi2MoO6纳米粒子沉积在BiVO4纳米片表面从而形成异质结结构.紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi2MoO6/BiVO4异质结较纯相Bi2MoO6和BiVO4对可见光吸收更强.由于形成异质结结构及其光吸收性能使Bi2MoO6/BiVO4光催化活性有较大提高.可见光下(λ420 nm)光催化降解罗丹明B(RhB)实验结果表明,Bi2MoO6/BiVO4光催化活性较纯相Bi2MoO6和BiVO4高.Bi2MoO6/BiVO4样品光催化性能提高的原因是Bi2MoO6和BiVO4形成异质结,从而有效抑制光生电子-空穴对的复合,增大了可见光吸收范围及比表面积.     

Pt/Ni双金属纳米溶胶的制备及催化制氢性能

采用化学共还原法制备了聚乙烯吡咯烷酮(PVP)稳定的Pt/Ni双金属纳米溶胶.采用紫外-可见光谱(UV-Vis)、透射电子显微镜(TEM)对所合成的Pt/Ni双金属纳米溶胶进行了表征, 并系统研究了PVP用量、还原剂用量和浓度、双金属比例对该双金属纳米溶胶催化剂催化性能的影响.结果表明, 所制备的双金属纳米溶胶的平均粒径在2.0 nm左右, Pt/Ni双金属纳米溶胶的催化活性比Pt及Ni单金属纳米溶胶的高, 当Pt/Ni摩尔比为1:4时, 纳米溶胶的催化活性最高, 其活性值为16640 mol_H2·mol_Pt^-1·h^-1.所制备的Pt/Ni双金属纳米溶胶催化剂具有很好的耐久性, 5次催化实验后该催化剂仍保持较高的催化活性.该双金属纳米溶胶催化NaBH₄水解反应的活化能为48 kJ/mol.     

仿贝壳结构的自组装纳米复合薄膜的制备、表征及摩擦学性能研究

利用超分子自组装方法在普通玻璃表面制备了仿贝壳有机-无机复合纳米薄膜 。采用X射线衍射仪、傅立叶红外光谱仪、X射线光电子能谱仪及透射电子显微镜等 对薄膜结构进行了表征。用动-静摩擦系数测定仪初步考察了其摩擦行为。结果表 明,这种薄膜具有机-无机有序交替的层状纳米复合结构,其聚合前的层间距为4. 20 nm, 聚合后的层间距为3.91 nm。聚合后的仿贝壳自组装纳米复合薄膜具有良好 的减摩性能。     

模板-电泳沉积法制备TiO_2纳米棒

室温(约25℃)下,将钛酸四丁酯水解制得TiO2溶胶,利用电泳沉积法在氧化铝模板中填充胶体,经450℃煅烧处理,制备了TiO2纳米棒.用透射电子显微镜和X射线衍射仪对样品进行了表征.结果表明,所得到的TiO2纳米棒表面光滑、致密,直径约180 nm,具有锐钛矿型结构.     

氨基修饰石墨烯量子点的制备及应用研究

采用强酸氧化单壁碳纳米管制得石墨烯量子点(GQDs),然后在氨水中进行水热处理,得到氨基功能化石墨烯量子点(N-GQDs)。通过荧光光谱(PL)、傅里叶红外光谱(FTIR)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、原子力显微镜(AFM)对所制备的N-GQDs进行结构和光学性质的表征。结果表明,N-GQDs粒径分布为3. 5 nm,高度小于0. 6 nm,能够均匀分散在水溶液中,并发出蓝色荧光。研究还发现,在p H=7. 0磷酸盐缓冲溶液中,所制备的N-GQDs对Hg2+具有猝灭作用。     

Preparation of stable colloidal solution of cadmium sulfide CdS using ethylenediaminetetraacetic acid

By the method of chemical condensation a stable aqueous colloidal solution of nanoparticles of cadmium sulfide was obtained. The solution obtained in the daylight had a bright lemon-yellow color. For the temporary stabilization of the solution was used an organic complexone, disodium ethylenediaminetetraacetate (EDTA), that prevented coagulation of colloidal particles up to several months at 4°C. At room temperature, the solution remained stable during a month. The structure and properties of the disperse phase were studied by the X-ray diffraction, optical fluorescence, and electron microscopy. The solid particles size is about 3 nm, they have a disordered close-packed structure with the space group P6mm and possess the photoluminescence color from green to orange depending on the duration of keeping the solution. The size of coagulates was 10 nm, 100 nm, and 1 μm after keeping for 1, 2, and 4 months, respectively.     

Zinc sulfide nanoparticles: a mechanism of formation in aqueous solutions and optical properties

The formation of sols and precipitates of zinc sulfide as a result of the exchange reaction in an aqueous solution was studied. The precipitates consist of aggregates of primary particles about 3 nm in size. The primary ZnS particle size in aqueous sols increases with an increase in the concentration of zinc sulfate and sodium sulfide, with the accumulation of the final reaction product, and with temperature. This effect does not exceed an 1.5-fold increase. At the first step, the particles with a considerable fraction of the amorphous phase are formed and undergo intragrain crystallization. The photoluminescence properties of aqueous sols of zinc sulfide were studied. They are caused by defects in the ZnS lattice and by the presence of the lattice oxygen.     

CdS量子点的制备及细胞膜初步荧光标记

以巯基乙酸为稳定剂,通过控制反应温度、反应时间及pH值,在水相中合成了稳定的受激发出紫光、蓝光、绿光、黄光和红光的CdS量子点;通过紫外可见吸收光谱、荧光光谱和X射线衍射谱(XRD)对产物的光学性能和晶体结构进行了表征,结果表明所合成的CdS量子点分散性较好,量子产率为8%,为立方晶型,粒径约1 nm;利用荧光倒置显微镜观察了量子点在洋葱内表皮细胞膜上聚集及受激发射荧光行为,实现细胞膜初步标记.     

Solvothermal synthesis of well-dispersed NaMgF3 nanocrystals and their optical properties

Complex metal fluoride NaMgF(3) nanocrystals were successfully synthesized via a solvothermal method at a relatively low temperature with the presence of oleic acid, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectra, photoluminescence (PL) excitation and emission spectra, respectively. In the synthetic process, oleic acid as a surfactant played a crucial role in confining the growth and solubility of the NaMgF(3) nanocrystals. The as-prepared NaMgF(3) nanocrystals have quasi-spherical shape with a narrow distribution. A possible formation mechanism of the nanocrystals was proposed based on the effect of oleic acid. The as-prepared NaMgF(3) nanocrystals are highly crystalline and well-dispersed in cyclohexane to form stable and clear colloidal solutions, which demonstrate a strong emission band centered at 400 nm in photoluminescence (PL) spectra compared with the cyclohexane solvent. The PL properties of the colloidal solutions of the as-prepared nanocrystals can be ascribed to the trap states of surface defects.     

基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

The Research on the Stability of TiO2， MoO3， PEO Doped Four-member Tungstic Acid Sols

The TiO2, MoO3, PEO doped four-member tungstic acid sols were prepared for the first time. The stability of different doped content sols were investigated and optimized with rotational viscometer. The four-member doped tungstic acid sol was very stable which could be stored more than two months at room temperature. The WO3 electrochromic film prepared from this doped four-member tungstic acid sol had excellent performance and longevity of service.     

Morphology-controllable synthesis and characterization of single-crystal molybdenum trioxide

Molybdenum trioxide nanobelts and prism-like particles with good crystallinity and high surface areas have been prepared by a facile hydrothermal method, and the morphology could be controlled by using different inorganic salts, such as KNO3, Ca(NO3)2 , La(NO3)3, etc. The possible growth mechanism of molybdenum trioxide prism-like particles is discussed on the basis of the presence of H+ and the modification of metal cations. The as-prepared nanomaterials are characterized by means of powder X-ray diffraction (PXRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transformation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and ultraviolet and visible spectroscopy (UV-vis). TEM and HRTEM micrographs show that the molybdenum trioxide nanobelts and prism-like particles have a relatively high degree of crystallinity and uniformity. BET specific surface areas of the as-prepared molybdenum trioxide nanocrystals are 67-79 m2 g-1. XPS analysis indicates that the hexavalent molybdenum is predominant in the nanocrystals. UV-vis spectra reveal that the direct band gap energy of the annealed molybdenum trioxide prism-like particles shows a pronounced blue shift compared to that of bulk MoO3 powder. Interestingly, molybdenum trioxide nanobelts exhibit a red shift under this condition.     

含三价铕荧光络合物与聚甲基丙烯酸甲酯的发光材料

用荧光性能优异的Eu(TTA) 3 ·2TPPO络合物与聚甲基丙烯酸甲酯 (PMMA)制备了一系列发出红色荧光的光致发光材料 .荧光测定结果表明 :PMMA膜的荧光强度随膜中络合物含量的增加而增大 .红外光谱研究表明络合物与PMMA之间存在相互作用 .透射电镜观测结果表明络合物在复合膜中是以亚微米颗粒分散的 .     

MnO2纳米溶胶-甲醛化学发光体系及其分析应用研究

Na2S2O3在中性水溶液中还原KMnO4可制备得到暗棕色的可溶性MnO2溶胶.所制备的MnO2溶胶透明、稳定,最大吸收波长位于357 nm处,平均粒径约40 nm.研究发现,所制备的MnO2纳米溶胶在酸性介质中与甲醛反应可产生弱的化学发光.考察了近30种药物分子在MnO2纳米溶胶-甲醛体系中的化学发光行为.结果表明,吩噻嗪类药物、氨基硫醇类药物等对该体系的化学发光信号具有显著的增强作用.据此,建立了利用这一化学发光体系测定五种吩噻嗪类药物和四种氨基硫醇类药物新的流动注射化学发光分析方法.所建立的方法被成功地用于片剂中奋乃静含量和猪饲料中盐酸氯丙嗪含量的测定.通过对化学发光光谱、荧光光谱、紫外可见吸收光谱等实验的研究,提出了可能的化学发光反应机理.所有反应的化学发光光谱的最大发射波长均位于630～640 nm间,与分析物的种类无关.当向反应体系中加入单线态氧清除剂叠氮化钠和三亚乙基二胺时,反应的化学发光强度被不同程度的抑制,这表明单线态氧可能是该化学发光反应的发光体.