g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将Bi OBr纳米片生长到g-C_3N_4表面,制得g-C_3N_4-Bi OBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由Bi OBr和g-C_3N_4两相组成,Bi OBr纳米片在片状g-C_3N_4表面快速形核生长形成面-面复合结构。相比于纯相g-C_3N_4和Bi OBr,g-C_3N_4-Bi OBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 gC_3N_4-Bi OBr复合光催化剂光催化活性分别是纯相g-C_3N_4和Bi OBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

TiO_2/Bi_2WO_6纳米异质结的制备及其可见光光催化性能

采用共沉淀法制备了不同Ti/Bi摩尔比的TiO_2/Bi_2WO_6纳米异质结可见光光催化剂.采用XRD、HR-TEM、XPS及UV-vis DRS测试技术对样品的晶相结构、微观形貌、组成及吸光性能等进行了表征分析.以MB模拟环境污染物,考察了TiO_2/Bi_2WO_6纳米异质结的可见光光催化活性.结果表明,当热处理温度为700℃,n(Ti)∶n(Bi)的比值为1∶5.4,可见光照射180 min时,TiO_2/Bi_2WO_6纳米异质结对MB的降解率达80.0%,是纯Bi_2WO_6的12倍.光催化活性的提高可归因于TiO_2与Bi_2WO_6复合后可以产生能带交叠效应,从而促进光生电子-空穴对的有效分离.     

异质结构AgCl/Bi2WO6微米球制备、表征及其光催化性能

首先利用水热法制备了由纳米片组装的粒径为1.5–2μm的Bi2WO6微球,然后在微球表面沉积了不同含量的AgCl (5 wt%,10wt%,20wt%,30wt%),制备了异质结构AgCl/Bi2WO6微球光催化剂.利用X射线粉末衍射、扫描电镜、透射电镜、红外光谱、紫外-可见漫反射吸收等手段对所制的光催化剂进行表征,并以紫外光和可见光分别为光源,罗丹明B为降解对象测试了其光催化活性,考察复合不同含量的AgCl对Bi2WO6光催化剂的性能影响.结果表明,沉积AgCl对Bi2WO6的晶体结构、表面性能和光吸收性能没有产生明显影响,但大幅度提高了Bi2WO6的紫外和可见光催化活性.当复合20wt%AgCl时, AgCl/Bi2WO6光催化活性最佳,紫外光下比纯Bi2WO6提高了2.2倍,可见光下提高了1倍.这主要是由于形成的AgCl/Bi2WO6异质结能有效抑制光生电子和空穴的复合,从而提了其光催化性能.     

Bi2MoO6/BiVO4异质结的水热合成和可见光催化活性

采用一步水热法制备Bi₂MoO₆/BiVO₄复合光催化剂. 利用X 射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征. 结果表明, Bi₂MoO₆纳米粒子沉积在BiVO₄纳米片表面从而形成异质结结构. 紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi₂MoO₆/BiVO₄异质结较纯相Bi₂MoO₆和BiVO₄对可见光吸收更强. 由于形成异质结结构及其光吸收性能使Bi₂MoO₆/BiVO₄ 光催化活性有较大提高. 可见光下(λ>420 nm)光催化降解罗丹明B (RhB)实验结果表明,Bi₂MoO₆/BiVO₄光催化活性较纯相Bi₂MoO₆和BiVO₄高. Bi₂MoO₆/BiVO₄样品光催化性能提高的原因是Bi₂MoO₆和BiVO₄形成异质结, 从而有效抑制光生电子-空穴对的复合, 增大了可见光吸收范围及比表面积.     

异质结Bi_2WO_6/ZnO复合光催化剂的制备及其光催化降解含酚废水的研究

采用水热法制备了一系列Bi2WO6/Zn O异质结光催化剂,并对其进行X射线衍射(XRD)、紫外-可见光谱(UV-Vis DRS)、扫描电镜(SEM)、光电子能谱(EDS)等手段对其结构性质进行了表征。在含酚废水的液相反应体系中,研究了异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的性能。结果表明,Bi2WO6/Zn O异质结的形成可以有效的抑制光生电子和空穴对的结合,使其光催化活性明显优于纯的Zn O和Bi2WO6;另外,异质结型Bi2WO6/Zn O复合光催化剂的表面OH·自由基更有利于光催化活性的提高。当Bi2WO6复合量为4wt%时,异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的效果最佳。     

异质结构AgCl/Bi_2WO_6微米球制备、表征及其光催化性能（英文）

首先利用水热法制备了由纳米片组装的粒径为1.5–2μm的Bi2WO6微球,然后在微球表面沉积了不同含量的AgC l(5 wt%,10 wt%,20 wt%,30 wt%),制备了异质结构Ag Cl/Bi2WO6微球光催化剂.利用X射线粉末衍射、扫描电镜、透射电镜、红外光谱、紫外-可见漫反射吸收等手段对所制的光催化剂进行表征,并以紫外光和可见光分别为光源,罗丹明B为降解对象测试了其光催化活性,考察复合不同含量的AgC l对Bi2WO6光催化剂的性能影响.结果表明,沉积AgC l对Bi2WO6的晶体结构、表面性能和光吸收性能没有产生明显影响,但大幅度提高了Bi2WO6的紫外和可见光催化活性.当复合20 wt%Ag Cl时,AgC l/Bi2WO6光催化活性最佳,紫外光下比纯Bi2WO6提高了2.2倍,可见光下提高了1倍.这主要是由于形成的Ag Cl/Bi2WO6异质结能有效抑制光生电子和空穴的复合,从而提了其光催化性能.     

水热法合成LaPO_4/TiO_2异质结复合光催化材料及性能研究

以静电纺丝技术制备的锐钛矿相TiO_2纳米纤维为基质,尿素为碱源,环己烷六羧酸为小分子模板剂,采用水热法合成了LaPO_4/TiO_2异质结复合纳米纤维。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高倍透射电子显微镜(HRTEM)和X射线衍射(XRD)等分析测试手段对产物形貌和结构进行了表征,并以甲基橙为模拟污染物,紫外光为光源,评价了样品光催化降解活性。结果表明:LaPO_4纳米棒均匀地构筑在TiO_2纳米纤维表面,制备了LaPO_4/TiO_2异质结复合纳米纤维光催化材料,其具有比纯TiO_2纳米纤维和Degussa P-25更强的光催化活性,降解率达到89.4%。     

圆盘状Bi2WO6-BiPO4异质结的水热合成及光催化性能

采用水热法制备Bi2WO6-BiPO4异质结光催化剂．利用模拟太阳光照射下的罗丹明B降解实验评价了Bi2WO6-BiPO4复合物的光催化性能．结果表明,Bi2WO6-BiPO4光催化活性比Bi2WO6和BiPO4高得多．当Bi2WO6与BiPO4的摩尔比为1：1时复合光催化剂对罗丹明B的降解率最高．Bi2WO6-BiPO4催化活性增强主要归结为两者之间形成了有效的异质结结构,其内建电场能够促进光生载流子的分离．同时,Bi2WO6的加入增强了其对可见光的吸收．研究表明O2^· -和h^＋在光催化降解过程中是主要的活性物种.     

BiOCl/NaBiO_3复合材料的原位合成及光催化性能

利用HCl与Na Bi O3反应原位制备了结构可控的Bi OCl/Na Bi O3复合光催化材料.通过X射线粉末衍射(XRD)、紫外-可见漫反射光谱(UV-Vis-DRS)和扫描电子显微镜(SEM)等技术对其晶相组成、光吸收特性和表面形貌进行了表征,并评价了样品在可见光和紫外光下的光催化性能.结果表明,尽管Bi OCl几乎没有可见光活性,但27.4%Bi OCl/Na Bi O3在可见光下却表现出明显高于纯Bi OCl和Na Bi O3的光催化活性.由于紫外光照可以有效激发Bi OCl,所有组成的复合Bi OCl/Na Bi O3都显示出高于纯Bi OCl和Na Bi O3的光催化活性,其中47.6%Bi OCl/Na Bi O3具有最大光催化活性.研究了加入不同活性物种的捕获剂对光催化效率的影响,结合荧光实验结果和样品能带结构推测了复合材料光催化过程中光生载流子的传输行为.结果表明,Bi OCl/Na Bi O3催化活性增强主要归结于2种材料之间形成了有效的异质结构,其内建电场能够促进光生载流子的传输和分离;羟基自由基在光催化降解过程中是主要的活性物种.     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi_2MoO_6/TiO_2复合纳米纤维。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)以及荧光光谱(PL)等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明:在稀土掺杂样品中,Ce离子进入Bi_2MoO_6晶格,部分取代Bi3+,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO_2复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO_2纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

ZnCuAl-LDH/Bi2MoO6纳米复合材料的构建及其可见光催化降解性能

In this study, pure Bi₂MoO₆ was synthesized via a solvothermal method. A ZnCuAl-layered double hydroxide (LDH)/Bi₂MoO₆ (denoted as LDH/Bi₂MoO₆) nanocomposite was synthesized via a steady-state co-precipitation route using Bi₂MoO₆ as the matric material. LDH was deposited on the surface of Bi₂MoO₆ with a close contact interface. The specific surface area of the resulting LDH/Bi₂MoO₆ composite increased up to 19.1 m²∙g⁻¹ owing to the stacking arrangement between LDH and the Bi₂MoO₆ nanosheets, resulting in the generation of a large number of reactive sites. In addition, the light absorption region of the LDH/Bi₂MoO₆ composite was larger than those of pure LDH and Bi₂MoO₆ because of the formation of a heterojunction structure and the possible quantum size effect. The photocatalytic performance of the as-prepared samples was evaluated by carrying out the degradation of rhodamine B (RhB) using them under visible light irradiation. Compared to pure LDH and Bi₂MoO₆, the LDH/Bi₂MoO₆ nanocomposite exhibited enhanced photocatalytic activity for the degradation of RhB. With an increase in the LDH content, the photocatalytic activity of the LDH/Bi₂MoO₆ composite first increased and then decreased. Although the addition of an optimum amount of LDH was beneficial for the generation of electron-hole pairs, excessive LDH on the surface of Bi₂MoO₆ decreased the visible light absorption ability of both the components, thus reducing photocatalytic activity of the composite. This indicates that an appropriate LDH:Bi₂MoO₆ molar ratio is necessary for obtaining LDH/Bi₂MoO₆ composites with excellent photocatalytic activity. Furthermore, the LDH/Bi₂MoO₆ composite showed high photocatalytic stability and reusability. The structure of the LDH/Bi₂MoO₆ composite remained almost unchanged even after four photodegradation cycles. The enhanced photocatalytic performance of the composite can be attributed to the combined effect of its heterojunction structure and high specific surface area, which are beneficial for effective separation of photogenerated charge carriers and the availability of a large number of active sites for photocatalysis. It was found that •OH and O₂^•− were the main reactive species, while e⁻ and h⁺ contributed little to the photodegradation process. The generation, transfer, and separation of photoinduced electrons and holes in the composites were investigated by transient photocurrent responses, electrochemical impedance spectroscopy Nyquist plots, and photoluminescence measurements. The results showed that the heterojunction structure of the composites played a key role in enhancing their photocatalytic activity. A possible photodegradation mechanism was proposed for the composite. This study will provide a facile approach for the preparation of LDH- and/or Bi₂MoO₆-based nanocomposites. The LDH/Bi₂MoO₆ nanocomposite prepared in this study showed huge potential to be used as a visible-light photocatalyst for degrading environmental pollutants.     

Ag_3PO_4/BiVO_4复合光催化剂的制备及可见光催化降解染料(英文)

结合回流法和原位沉淀法成功制备磷酸银/矾酸铋(Ag3PO4/BiVO4)复合光催化剂.通过X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、能量色散X射线光谱(EDS)、紫外-可见漫反射光谱(UV-Vis DRS)及光致发光(PL)光谱对制备样品进行表征.XRD和FESEM结果表明成功制备Ag3PO4/BiVO4复合光催化剂.采用节能发光二极管灯(LED)作为可见光光源,在低消耗光催化系统中评价制备样品可见光催化降解染料的活性.当Ag3PO4和BiVO4的组成摩尔比为1:3时,复合Ag3PO4/BiVO4光催化剂呈现出高于纯相Ag3PO4的催化活性,可减少Ag3PO4的使用量.Ag3PO4/BiVO4复合光催化剂在中性溶液中表现出高活性,同时证实其对阳离子染料的光催化降解效果强于阴离子染料.在Ag3PO4/BiVO4系统中,超氧自由基和空穴是主要的活性物种.经过三次循环利用,Ag3PO4/BiVO4复合催化剂的可见光催化活性表现出不同程度的降低,归因于降解过程中产生金属银.     

氧化石墨烯调控钼酸铋在可见光下选择性光催化降解环境水中的抗生素

以氧化石墨烯(GO)作为增强光催化剂活性的调节剂, 采用一步水热法制备钼酸铋/氧化石墨烯(Bi₂MoO₆/GO)异质结光催化剂, 其可见光响应拓展至570 nm, 带隙能降至2.56 eV. 当m_Bi2MoO6/m_GO=100∶1时, Bi₂MoO₆/GO(100∶1)光催化剂在可见光的辐射下, 对水溶液中四环素和喹诺酮类抗生素选择性的高效催化降解去除能力为Bi₂MoO₆的2.1倍. Bi₂MoO₆/GO(100∶1)光催化剂活性的提高依赖于范德华力作用下的二维Bi₂MoO₆纳米片-二维GO纳米片界面的紧密接触. 有效的界面接触改善了光生电子的转移和光生载流子的分离. 自由基清除实验结果表明, ?OH起主要作用. 结合高效液相色谱-质谱(HPLC-MS)法对降解产物的分析, 提出了不同光催化剂催化降解恩诺沙星具有相似的降解途径和降解产物.     

Significantly Enhanced Performance of g-C3N4/Bi2MoO6 Films for Photocatalytic Degradation of Pollutants Under Visible-light Irradiation

The films of photocatalysts have been widely used in decomposition pollutants. In this study, the films were successfully prepared from Bi₂MoO₆ and g-C₃N₄/Bi₂MoO₆ by a simple method, respectively. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), photoluminescence(PL), UV-Vis diffuse reflectance spectroscopy(DRS) and electrochemical experiments to investigate crystalline structure, morphology, composition and properties. The photocatalytic activity of the photocatalyst films for the pollutants was evaluated by degradation of methylene blue(MB) in aqueous solution under visible light irradiation. Experiments revealed that the film of g-C₃N₄/Bi₂MoO₆ exhibited higher photocatalytic ability compared to the single-component photocatalyst, and proved its stability. The superior catalytic performance can be attributed to the effective separation of electron-hole pairs and the reduced rate of recombination. This work is of great value for the preparation of photocatalysts films.     

CuO/BiVO4光催化剂的制备及光催化CO2还原性能

基于类十面体钒酸铋(BiVO₄)和氧化铜(CuO)纳米颗粒, 构筑了CuO/BiVO₄异质结光催化剂; 利用X射线衍射仪(XRD)、 X射线光电子能谱仪(XPS)、 扫描电子显微镜(SEM)、 紫外-可见吸收光谱(UV-Vis)、 光电流响应谱(I-t)、 电化学阻抗谱(EIS)和荧光发射光谱(PL)对催化剂的形貌、 结构和光电性能进行了表征和分析. 结果表明, CuO纳米颗粒均匀地负载在BiVO₄的表面, 通过控制铜源的用量可以调节CuO的含量, 其含量对CuO/ BiVO₄异质结的可见光吸收能力和光生载流子的分离效率有很大的影响. 在气固反应体系下, 对CuO/BiVO₄异质结的光催化还原CO₂的性能进行了研究. 结果显示, 光催化还原CO₂的主要产物为CO和CH₄; 随着CuO含量的增加, CO的产率逐渐降低, 而CH₄的产率先增加后降低, 最优化催化剂CuO/BiVO₄的CO和CH₄的产率分别为0.62和1.81 μmol·g^-1·h^-1, 对CH₄的选择性达到最大值(93%). 能带结构分析和电子顺磁共振(EPR)测试结果表明, CuO/BiVO₄中光生电荷的转移符合Z型转移机制. Z型异质结构的形成, 促进了光生电子和空穴的分离, 提升了催化体系的氧化还原能力.     

钨酸铋量子点和纳米片修饰石墨相氮化碳复合催化剂的制备及其可见光催化活性增强

利用超声-水热法、使用油酸钠辅助合成钨酸铋(Bi₂WO₆)量子点/纳米片修饰的石墨相氮化碳(g-C₃N₄)(Bi₂WO₆/g-C₃N₄)复合光催化剂。 通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FT-IR)、紫外可见漫反射光谱(UV-Vis DRS)、N₂吸附-脱附等技术手段获得Bi₂WO₆/g-C₃N₄催化剂的组成、结构和光吸收性能,分析合成机理。 以罗丹明B(RhB)水溶液为模拟污染物,考察Bi₂WO₆/g-C₃N₄复合催化剂的可见光催化活性。 结果表明:g-C₃N₄和Bi₂WO₆的质量比为3:7的Bi₂WO₆/g-C₃N₄-30具有最有效的异质界面,电化学阻抗和光电流测试结果显示该催化剂的光生载流子传输速率快、复合率低,可见光照射120 min对RhB的降解率达到95.8%;通过活性物质捕捉实验获知光生空穴是光催化反应中的主要活性物质,分析异质界面对光催化活性的影响,进而提出光催化反应机理。     

新型S型CdS-BiVO4异质结光电极的构筑及产氢性能研究

通过化学浴和连续离子层沉积法构筑了BiVO₄/CdS和CdS/BiVO₄两种S型异质结薄膜光电极. 利用扫描电子显微镜(SEM)、 X射线衍射(XRD)、 紫外-可见吸收光谱(UV-Vis)以及电化学阻抗谱(EIS)对其形貌、 结构和光电性能进行了表征, 测试了两种薄膜电极的光催化和光电催化产氢性能. 结果表明, CdS和BiVO₄之间形成S型异质结, BiVO₄/CdS表现出最佳的光催化产氢性能, 而CdS/BiVO₄表现出最佳的光电催化产氢性能. 借助表面光电压技术探究了两种薄膜电极中S型异质结内建电场的形成过程和载流子传输的机制.     

A new efficient visible-light-driven photocatalyst Na0.5Bi1.5VMoO8 for oxygen evolution

A new visible-light-driven photocatalyst Na_0.5Bi_1.5VMoO₈ was developed by making a solid solution of BiVO₄ and (NaBi)_0.5MoO₄. The prepared powders were confirmed crystallizing in the tetragonal scheelite crystal structure by the XRD patterns and Raman spectra. Different from that of the tetragonal BiVO₄, Na_0.5Bi_1.5VMoO₈ showed a high activity for photocatalytic O₂ evolution under visible light irradiation, which is even better than that of monoclinic BiVO₄, a well-known efficient visible-light-driven photocatalyst. The mechanism of the improved activity of Na_0.5Bi_1.5VMoO₈ was discussed.     

高催化活性2D/2D Ti3C2/Bi4O5Br2纳米片异质结的构建及其可见光催化去除NO

This study concentrated on the production of a two-dimensional and two-dimensional (2D/2D) Ti₃C₂/Bi₄O₅Br₂ heterojunction with a large interface that applied as one of the novel visible-light-induced photocatalyst via the hydrothermal method. The obtained photocatalysts enhanced the photocatalytic efficiency of the NO removal. The crystal structure and chemical state of the composites were characterized using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results showed that Ti₃C₂, Bi₄O₅Br₂, and Ti₃C₂/Bi₄O₅Br₂ were successfully synthesized. The experimental results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the prepared samples had a 2D/2D nanosheet structure and large contact area. This structure facilitated the transfer of electrons and holes. The solar light absorptions of the samples were evaluated using the UV-Vis diffuse reflectance spectra (UV-Vis DRS). It was found that the absorption band of Ti₃C₂/Bi₄O₅Br₂ was wider than that of Bi₄O₅Br₂. This represents the electrons in the Ti₃C₂/Bi₄O₅Br₂ nanosheet composites were more likely to be excited. The photocatalytic experiments showed that the 2D/2D Ti₃C₂/Bi₄O₅Br₂ composite with high photocatalytic activity and stability. The photocatalytic efficiency of pure Bi₄O₅Br₂ for the NO removal was 30.5%, while for the 15%Ti₃C₂/Bi₄O₅Br₂ it was 57.6%. Moreover, the catalytic reaction happened in a short period. The concentration of NO decreased exponentially in the first 5 min, which approximately reached the final value. Furthermore, the stability of 15%Ti₃C₂/Bi₄O₅Br₂ was favorable: the catalytic rate was approximately 50.0% after five cycles of cyclic catalysis. Finally, the scavenger experiments, electron spin resonance spectroscopy (ESR), transient photocurrent response, and surface photovoltage spectrum (SPS) were applied to analyze the photocatalytic mechanism of the composite. The results indicated that the 2D/2D heterojunction Ti₃C₂/Bi₄O₅Br₂ improved the separation rate of the electrons and holes, thus enhancing the photocatalytic efficiency. In the photocatalytic reactions, the photogenerated electrons (e⁻) and superoxide radical (·O₂⁻) were critical active groups that had a significant role in the oxidative removal of NO. The in situ Fourier-transform infrared spectroscopy (in situ FTIR) showed that the photo-oxidation products were mainly NO₂⁻ and NO₃⁻. Based on the above experimental results, a possible photocatalytic mechanism was proposed. The electrons in Bi₄O₅Br₂ were excited by visible light. They jumped from the valence band (VB) of Bi₄O₅Br₂ to the conduction band (CB). Then, the photoelectrons transferred from the CB of Bi₄O₅Br₂ to the Ti₃C₂ surface, which significantly promoted the separation of the electron-hole pairs. Therefore, the photocatalytic efficiency of Ti₃C₂/Bi₄O₅Br₂ on NO was significantly improved. This study provided an effective method for preparing 2D/2D Ti₃C₂/Bi₄O₅Br₂ nanocomposites for the photocatalytic degradation of environmental pollutants, which has great potential in solving energy stress and environmental pollution.