MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.     

PEG还原Cu(Ⅱ)制备Cu2O纳米立方晶

Cuprous oxide (Cu₂O) nanocubes have successfully been prepared through a simple and novel method by heating Cu(ethyl acetoacetate)₂ (Cu(EAC)₂) and poly(ethyleneglycol) (PEG) in the absence of other chemicals. The PEG acted as the reducing agent as well as the stabilizer. The XRD results indicated that no metal Cu or CuO developed in the preparation process, and only Cu₂O nanoparticles with the cuprous structure were produced. The TEM images revealed that all the Cu₂O nanoparticles were cubic-shaped or square-shaped particles. The size and shape of Cu₂O nanocubes were dependent on concentrations of the Cu(Ⅱ) precursor, reactant temperatures, and chain length of PEGs. It is interesting that the reducing reactivity of PEG was sensitive to its chain length, and the reduction reaction activity was drastically dropped with the decreasing of polymer′s chain length.     

Cu1-xAgxI(x=0.5～0.6)纳米微粒的制备与表征

In the presence of PVPK30,Cu_1-xAg_xI nanoparticles were prepared by ion exchange reaction.The product was characterized by FT-IR,XRD,TEM,EDS and SPS,respectively.It was found that the value of x is ap-proximately 0.5～0.6and the average diameter of the nanoparticles is 10～20nm.The product shows surface photovoltage property of semiconductor and the existence of Cu⁺ greatly enhances the separation efficiency of photoinduced electron-hole pairs.Meanwhile,SPS of Cu_1-xAg_xI nanoparticles with different X (Ag/I)value had been investigated. The results show that when X is 0.5～0.576, the SPS intensity of Cu_1-xAg_xI nanoparticles is highest.     

{[Cu4(nip)4(4，4′-bipy)4(DMF)4]·CH3OH}n配合物的合成与晶体结构

A coordination polymer, {[Cu₄(nip)₄(4，4′-bipy)₄(DMF)₄]·CH₃OH}_n, have been synthesized by the layer method using 5-nitroisophthalic acid (H₂nip), Cu(CH₃COOH)₂ and 4,4′-bipyridine(4,4′-bipy) with three solutions in a marrow tube and structurally characterized by X-ray single-crystal structure analysis. The results indicated that the nip ligand has a μ₂ mono-atomic bridging-monodentate coordination mode and the structure is a two-dimensional network. CCDC: 623420.     

溶剂热合成具有纳米孔结构的γ -Al2O3

Nanoporous gamma aluminum oxide (γ-Al₂O₃) was synthesized by solvothermal method in the presence of AlCl₃·6H₂O, urea and alcohol. The calcined sample was characterized by XRD, FTIR, TEM, and Nitrogen adsorption-desorption measurement. Results show that the obtained γ-Al₂O₃ is well-dispersed nanoparticles with particle size of 4～7 nm and the product has nano-pore structure with a narrow pore size distribution of 5～20 nm.     

原子簇化合物[WS4Cu3Br(bipy)2]的晶体结构和非线性光学性质

The title cluster compound [WS₄Cu₃Br(bipy)₂] has been synthesized by the reaction of (NH₄)₂[WS₄]， CuBr and 2，2′-bipy in DMF solution. Single crystal X-ray diffraction data show that the compound has a nest-shaped structure. Nonlinear optical properties (NLO) of the cluster were investigated by a Z-scan technique with a pulsed laser at 532nm. The cluster exhibits the strong NLO absorption and a self-defocusing effect (effective non-linear absorption coefficient， α₂^eff=7.3×10^-11mW^-1; effective non-linear refractive index， n₂^eff=3.9×10^-11esu) when measured in a 6.0×10^-4mol·dm^-3 DMF solution. CCDC： 200397.     

纳米TiO2-ZnO复合材料的合成、结构与光催化性能

Using ZnSO₄ and TiCl₄ as raw materials， nanometric TiO₂-ZnO (ZnTiO₃) is prepared at 180℃，0.8MPa by hydrothermal method. The effects of the reaction temperature and time on the nanometric TiO₂-ZnO are also dis-cussed. XRD shows that the product is TiO₂-ZnO (ZnTiO₃) with noncrystal phase， and it changes to rhombic form above 870℃. TEM measurement indicates that the TiO₂-ZnO is spherical particles， and the average diameter of the particles is 20nm. The UV light absorption properties are detected by UV spectrophotometer. The results show that the nanometric TiO₂-ZnO has strong absorption at 200～370nm and at visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometric TiO₂-ZnO as a photocatalyst. The results show that after 60min illumination， the decolorization rate of the acidic red B and acidic black 234 dye can be arrived at 100%.     

阴极材料LaFe0.8-xCuxNi0.2O3的合成和烧结性能

LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.2) (LFCN), a new cathode material of solid oxide fuel cell (SOFC), was synthesized by Co-precipitation method using sodium bicarbonate. The lattice structures of samples with different x contents were characterized by XRD. Porosity and density of the porous LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.1) as a function of sintering temperature were investigated. It was found that the orthorhombic structure could be formed after calcination at 900 ℃ for 4 h. The particle size of LFCN was about 350 nm. The density of the porous LFCN increased with sintering temperature, but the opposite was true for the porosity. On the other hand, at the same sintering temperature, the porosity of LaFe_0.8-xCu_xNi_0.2O₃ (x=0.0~0.1) decreased with increasing x contents. It is indicated that the dopant of Cu on LaFe_0.8Ni_0.2O₃ can facilitate the sintering of the materials. After sintering at 1 100 ℃ for 4 h, the porous LaFe_0.7Cu_0.1Ni_0.2O₃ was still with appropriate structure, and its porosity was 29%.     

Li4Ti5O12溶胶-凝胶法合成及其机理研究

The precursors of Li₄Ti₅O₁₂ were prepared from tetrabutyl titanate and lithium acetate by sol-gel process. The Li₄Ti₅O₁₂ samples were synthesized by calcining the gel precursors at 400～900 ℃ in air for 6～20 h. Its reaction mechanism was investigated by infrared spectroscopy(IR), thermogravimetry(TG) and X-ray diffraction(XRD). The effects of sinter-temperature, calcination-time and thermal-treatment for the products were discussed. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM). The results showed that the single-phase products were obtained by calcining the gel precursors at 800 ℃ in air for 20 h, the sinter-temperature was lower than that of solid-state method, the particles were narrowly distributed, well crystallized with a size range from 0.3μm to 0.5 μm.     

Synthesis and structure of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane

The preparation technique of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane (L), (Cu₂L₂Br₄)_n, is developed. The compound is studied by single crystal and powder X-ray diffraction and static magnetic susceptibility techniques. According to single crystal XRD data, the complex has a layered structure determined by bidentate bridging coordination of L with N(3) and N(3′) atoms to copper(II). The elementary unit of {Cu₂(μ-Br)₂Br₂} polymer has a binuclear structure. The coordination polyhedron is a trigonal pyramid, and the coordination core is CuN₂Br₃. The temperature dependence of effective magnetic moment is studied within an interval of 2–300 K. The nature of the μ_eff(T) dependence indicates that antiferromagnetic exchange interactions dominate in exchange clusters of the complex with an even number of paramagnetic centers. Original Russian Text Copyright ? 2007 by E. V. Lider, A. S. Potapov, E. V. Peresypkina, A. I. Smolentsev, V. N. Ikorskii, A. I. Khlebnikov, and L. G. Lavrenova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No.3, pp.543–547, May–June, 2007.     

Synthesis of SnSe in various alkaline media under mild conditions

The synthesis of SnSe was systematically investigated in various alkaline media and at various temperatures with SnCl2.2H2O and selenium as source materials. The basicity of the alkaline media and the reaction temperature are two key factors considered in our process. The synthesis of SnSe in sodium hydroxide solution and aqueous ammonia is limited to a narrow temperature range, while the synthesis in hydrazine hydrate and ethylenediamine proceeds over a wider range. The final products were characterized by X-ray diffraction pattern (XRD), energy dispersive X-ray (EDX), and transmission electron microscopy (TEM). TEM results showed a variation of crystal morphology of SnSe obtained in different media. Two simple chemical mechanisms for the formation of SnSe are presented.     

Ortho-chalcogenostannates as ligands: syntheses, crystal structures, electronic properties, and magnetism of novel compounds containing ternary anionic substructures [M4(mu4-Se)(SnSe4)4]10- (M=Mn, Zn, Cd, Hg), 3(infinity)[[Hg4(mu4-Se)(SnSe4)3]6-], or 1(infinity)[[HgSnSe4]2-

By reaction of K4[SnSe4].1.5 MeOH with CdCl2 or Hg(OAc)2 in water/methanol it was possible to prepare single crystals of four novel compounds that contain ternary anionic coordination oligomers and polymers: [K10(H2O)16(MeOH)(0.5)][M4(mu4-Se)(SnSe4)4] (4: M=Cd, 5: M=Hg), [K6(H2O)3][Hg4(mu4-Se)(SnSe4)3].MeOH (6), and K2[HgSnSe4] (7), which were structurally characterized by single-crystal X-ray diffraction. The optical absorption properties of the isostructural compounds 4 and 5, as well as those of the recently reported Zn (2) and Mn (3) analogues, were studied by UV-visible spectroscopy. These investigations showed the quaternary phases to have relatively small optical gaps for their molecular size (2.2-2.6 eV), which are similar to the excitation energies that were observed for mesostructured solids of the respective combination of elements. According to DFT investigations on the ternary anions, an experimentally observed difference between the absorption behavior of the d10 compounds 2, 4, and 5 and the open-shell d(5) compound 3 is in line with different characters of the frontier orbitals in the two cases. Both the calculations and a magnetic measurement on 3 demonstrated antiferromagnetic coupling between the mu(4)-Se-bridged Mn centers.     

Reactivity of chalcogenostannate compounds: syntheses,crystal structures,and electronic properties of novel compounds containing discrete ternary anions [MII4(mu4-Se)(SnSe4)4]10- (MII = Zn,Mn)

Reactions of K4[SnSe4].1.5MeOH with ZnCl2 or MnCl2.4H2O in water/methanol mixtures yield novel compounds [K10(H2O)16(MeOH)0.5][M4(mu4-Se)(SnSe4)4] (M = Zn, 2; Mn, 3) in high yields; 2 and 3 contain the first discrete ternary Zn/Sn/Se or Mn/Sn/Se cluster anions. Both compounds were unambiguously characterized by X-ray diffraction (tetragonal, space groups P43212 and P41212, respectively) revealing chiral anionic structures within chiral crystals. Optical spectra of 2 and 3 indicate energy differences for the lowest electronic excitations (Eg = 2.57 eV, 2; 2.27 eV, 3) that are very close to the band gap values observed for mesoporous solids with polymeric M/Sn/E networks. DFT investigations on the electronic situation and first ESR studies agree in that they demonstrate a high-spin ground state in the case of 3 with 20 unpaired electrons at four uncoupled MnII centers.     

脉冲激光沉积法制备SnSe薄膜电极及其电化学性质

采用脉冲激光溅射Sn和Se粉末的混合靶制备SnSe薄膜, XRD结果显示室温下得到的是Sn和Se的混合薄膜, 当基片温度为200 ℃时, 薄膜主要由晶态的SnSe组成. 该薄膜的首次放电容量为498 mAh•g-1, 30次循环之后的放电容量为260 mAh•g-1. 充放电测试、循环伏安曲线和ex-situ XRD结果显示, SnSe能够和Li发生可逆的电化学反应, 充电过程中能够重新生成SnSe, 表现出不同于其它氧族元素锡化物的电化学性质.     

Nanocrystalline tin as a preparative tool: synthesis of unprotected nanoparticles of SnTe and SnSe and a new route to (PhSe)4Sn

The reactions of nanocrystalline tin metal (Sn*) with elemental selenium and tellurium and with the diaryldichalcogenides Ph2Se2 and Ph2Te2 have been investigated. Reaction of Sn* with the soluble tellurium source Ph2Te2 led to a clean formation of nanoparticles of cubic SnTe. Dependent on the concentration of Ph2Te2, the particles sizes could be varied between 15 and 60 nm in average, whereas the reaction of Sn* with Ph2Se2 formed molecular Sn(SePh)4 in high yield. The latter molecular compound was thermolyzed at 300 degrees C, yielding nanocrystalline SnSe with a broader distribution of size. The nanoparticles of SnTe were thoroughly investigated by transmission electron microscopy (TEM) and powder X-ray diffraction. The reactions of Sn* with elemental selenium and tellurium gave single- phase but microcrystalline SnSe and SnTe.     

Phase equilibria in the GeSe2–SnSe system

The phase diagram of the system GeSe₂–SnSe is studied by means of X-ray diffraction, differential thermal analysis and measurements of the density and the microhardness of the material. There are no intermediate compounds in it, as well as regions of range of solid solutions at room temperature on the base of GeSe₂ and SnSe. There are two non-variant equilibria in the system: eutectic (where T _e=530±5°C and x _e= 40 mol% SnSe) and metaeutectic (where T _m=550±5°C and x _m=98 mol% SnSe).     

Core-shell nanorods of SnS-C and SnSe-C: synthesis and characterization

The straightforward, efficient, solventless, RAPET (reactions under autogenic pressure at elevated temperature) approach was explored for the fabrication of core-shell nanomaterials. Carbon-encapsulated SnS and SnSe nanorods were synthesized by a one-step thermal decomposition of tetramethyltin in the presence of either S or Se powder in a closed reactor at 700 degrees C for 40 min, under their autogenic pressure in an inert atmosphere. The powder X-ray diffraction measurements provided structural evidence for the formation of pure orthorhombic phases of SnS or SnSe particles. The Raman spectroscopy measurements ensured that the nature of the coated carbon was semigraphitic. The scanning electron micrographs verified the 1D morphology of the formed SnS and SnSe chalcogenides, and their stoichiometry was confirmed by EDAX measurements. The HR-TEM micrographs distinguished between core and shell morphologies. The nitrogen gas adsorption on the surface of core-shell nanostructures was determined by BET surface area analysis. The plausible mechanism for the creation of chalcogenide cores (SnS or SnSe) with a carbon shell was elucidated.     

Crystal structures of Sr4Sn2Se9 and Sr4Sn2Se10 and the oxidation state of tin in an unusual geometry

The new ternary selenostannates Sr(4)Sn(2)Se(9) and Sr(4)Sn(2)Se(10) have been synthesized by heating the elements at 1023 K in an argon atmosphere. Their structures were determined by single-crystal X-ray methods. Sr(4)Sn(2)Se(9) crystallizes in a new structure type (Pbam, a = 12.042(2) A, b = 16.252(3) A, c = 8.686(2) A, Z = 4) with Sn(2)Se(6)(4-), SnSe(4)(4-), and Se(2)(2-) subunits. Sr(4)Sn(2)Se(10) (P2(1)2(1)2, a = 12.028(2) A, b = 16.541(3) A, c = 8.611(2) A, Z = 4) has a similar structure with Se(3)(2-) triangles instead of Se(2)(2-) dumbbells. Strontium is 8-fold-coordinated by selenium in both cases. The opening angles between tin and the terminal selenium atoms in the Sn(2)Se(6) subunits are close to 160 degrees , which is nearer a typical Sn(2+) coordination geometry than classical SnSe(4) tetrahedra. This result suggests the tin oxidation state in the Sn(2)Se(6) units to be lower than the expected Sn(4+). This question is examined by self-consistent LMTO and LAPW band structure calculations expanded by the Bader analysis of the charge density to assign reliable atomic charges.     

On the road to a termolecular complex with acetone: a heterometallic supramolecular network [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]

A novel heterometallic supramolecular network [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]](2)( infinity ) has been prepared by codeposition of the volatile mono(acetone) adduct [Rh(2)(O(2)CCF(3))(4).eta(1)-OCMe(2)](2) and copper(I) trifluoroacetate, [Cu(4)(O(2)CCF(3))(4)]. The product is of interest from the viewpoints of gas-phase supramolecular synthesis and a rare bridging coordination mode of acetone. It has been fully characterized by IR and NMR spectroscopy, elemental analysis, and X-ray diffraction. An X-ray structure revealed a layered 2D arrangement of the heterometallic [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]] units built by axial intermolecular interactions of the open electrophilic Rh(II) and Cu(I) centers and O-atoms of neighboring carboxylate groups. The coordination of the acetone molecules within the [[Rh(2)(O(2)CCF(3))(4)].micro(2)-OCMe(2).[Cu(4)(O(2)CCF(3))(4)]] unit is asymmetric with the Rh-O and Cu-O distances being 2.2173(15) and 2.7197(17) A, respectively. This work shows the potential of gas-phase deposition that may provide additional possibilities in supramolecular synthesis by utilizing intermolecular interactions and coordination bonds in a new way compared with conventional solution chemistry.     

Cu7.2S4量子点玻璃的制备及三阶非线性光学性质

利用溶胶-凝胶法结合气氛控制合成了含Cu7.2S4量子点的玻璃. 通过热重-差热分析仪对干凝胶样品的热分解机制进行了分析, 并利用X射线粉末衍射仪、 X射线光电子能谱、 透射电子显微镜、 X射线能量色散谱)、 高分辨透射电子显微镜及选区电子衍射对 Cu7.2S4量子点在玻璃中的微结构进行了表征, 利用飞秒Z扫描技术研究了材料在800 nm的三阶非线性光学性质. 结果表明, 尺寸在9~21 nm之间的Cu7.2S4纳米晶已经在玻璃中形成, 该玻璃展示出了优异的三阶非线性光学性能, 其三阶非线性光学折射率(γ)、 三阶非线性吸收系数(β)和三阶非线性极化率[X(3)]分别为1.11×10-15 m2/W, 8.91×10-9 m/W和9.56×10-18 m2/V2.