聚苯乙烯/层状双金属氢氧化物纳米复合材料的制备与表征

由离子交换法制备4,4′-偶氮二(4-氰基戊酸)根(ACP)单独插层和ACP/对苯乙烯磺酸根(VBS)复合插层的层状双金属氢氧化物(LDH),再通过原位悬浮聚合制得聚苯乙烯(PS)/LDH纳米复合材料,对插层改性LDH和复合材料进行了结构和性能表征.X-射线衍射和元素分析表明ACP可以单独或与VBS一起插入到LDH层间.透射电镜和X-射线衍射分析表明采用ACP/VBS复合插层LDH与苯乙烯原位聚合得到的复合材料中LDH剥离程度高,熔融加工后LDH基本以纳米层板形式分散在PS基体中.LDH的引入可明显提高PS的热稳定性,而熔体流动性下降.     

从Hansen三维溶度参数探讨TMPTA-St在乙醇-水混合溶剂中沉淀聚合形成单分散聚合物微球的边界条件

以三羟甲基丙烷三丙烯酸酯(TMPTA)作交联剂,苯乙烯(St)作共聚单体,在不同TMPTA/St质量比下在乙醇与水的混合溶剂中进行沉淀聚合,对单体转化率和微球收率以及微球单分散性等参数进行了表征.对相应不同水含量的混合溶剂以及混合单体的Hansen三维溶度参数进行了计算,尝试对不同聚合条件下混合溶剂与混合单体的三维溶度参数进行比较以建立一个形成单分散微球的边界条件,为通过沉淀聚合制备单分散微球提供一个判断方法.在本文实验条件下,使用乙醇或其与水的混合物为聚合介质,当共混溶剂与共混单体的极性溶度参数之差Δδp和氢键溶度参数之差Δδh分别为5.0和12.4,9.2和20.1以及6.0和10.0 MPa1/2时,在由这3个实验点组成的区域之内进行沉淀聚合即可以制得单分散聚合物微球.当Hansen溶度参数之差(Δδp或Δδh)超出此范围时,沉淀聚合所制得聚合物微球分散度迅速变宽,甚至在聚合过程中凝胶化.色散溶度参数变化甚微,难以由此建立单分散微球的形成条件.     

导电聚合物PEDOT在有机溶剂中的分散性研究

以硫酸铁为氧化剂,在pH=2的条件下,通过化学氧化法制备了聚(3,4-乙撑二氧噻吩)(PEDOT),重点研究了PEDOT在九种有机溶剂中的分散性.结果表明,PEDOT在N-甲基吡咯烷酮中分散性最好,其分散液在静置3周后仍能够保持1.35 mg/mL的浓度.采用比重瓶法和基团贡献法,得到聚合物的密度和溶度参数分别为105.2 cm3/mol和21.28 J0.5cm-1.5;通过Chem 3D模拟,计算得到聚合物的偶极矩为14.58×10-30C·m.尽管溶剂NMP(13.64×10-3C·m)和DMSO(13.34×10-3C·m)的偶极矩都与PEDOT(14.58×10-3C·m)非常接近,然而,溶剂NMP(22.94 J0.5cm-1.5)的溶度参数更接近于PEDOT(21.28 J0.5cm-1.5).从溶度参数分量来看,与DMSO(19.03 J0.5cm-1.5)相比,NMP(18.03 J0.5cm-1.5)与PEDOT(16.39 J0.5cm-1.5)的色散溶度参数分量也更为接近.丁达尔现象的结果表明,聚合物在有机溶剂中以胶体形式存在.红外光谱和扫描电镜的研究结果表明,PEDOT在有机溶剂中能够保持良好的结构稳定性.     

层状双金属氢氧化物/碳纳米管复合物的制备及在有机溶剂中的分散

通过硝酸处理在碳纳米管(CNTs)表面生成了羧基(-COOH)基团, 随后采用尿素法在其水悬浮液中原位合成了层状双金属氢氧化物(LDH), 获得了层状双金属氢氧化物/碳纳米管复合物(LDH/CNTs), 考察了CNTs用量对LDH形貌与结构的影响. 结果表明, CNTs的用量对LDH的产率及结构无显著影响; 但当CNTs用量较低(<0.2 g/L)或过高(>4.0 g/L)时, 会导致LDH的粒径分布变宽. 对LDH/CNTs进行氯化及有机化处理, 获得了十二烷基苯磺酸根离子(DBS)插层的DBS-LDH/CNTs. 对DBS-LDH/CNTs在不同有机溶剂中分散及剥离程度的研究发现, DBS-LDH/CNTs在丁醇、 乙醇及二甲苯中均可良好分散且其悬浮液较稳定, LDH在不同溶剂中的剥离程度为丁醇>乙醇>二甲苯>四氢呋喃.     

基于Hansen溶度参数的煤直接液化残渣超临界萃取

以丙酮、 异丙醇和苯为溶剂在超临界状态下对煤直接液化残渣进行萃取, 应用溶度参数分析了超临界萃取环境中溶剂和萃取原料的变化; 基于Hansen拓展方法建立了关联Hansen溶度参数和萃取收率的理论方程. 结果表明, 临界温度较高. 以色散力溶度参数为主的苯的萃取收率明显高于其它2种溶剂; 液化残渣中可萃出组分的理想溶解度随温度的升高而增大, 该效应也是超临界溶剂萃取重质组分时萃取收率提高的重要原因; 萃取收率与Hansen溶度参数之间的回归模型与实验结果具有较好的一致性, 证明Hansen溶度参数理论和Hansen拓展方法适用于描述煤直接液化残渣的超临界萃取过程.     

反气相色谱法对八异辛基倍半硅氧烷热力学性质的表征

采用反气相色谱技术,以23种溶剂为探针分子,表征了八异辛基倍半硅氧烷(octaisooctyl-POSS)的热力学性质,包括摩尔溶解焓、分子间相互作用参数、质量活度系数、Hansen溶度参数,并有效判断了溶剂探针分子与共聚物分子间的相互作用以及共聚物在这些溶剂中的溶解性.结果表明,在实验温度范围内(343 ～393 K),烷烃、芳香烃、卤代烃类、乙醚以及乙酸甲酯是octaisooctyl-POSS的良溶剂,乙酸乙酯、乙酸正丙酯、乙酸正丁酯与乙酸正戊酯是中等溶剂,醇类、丙酮以及四氢呋喃是不良溶剂;Hansen溶度参数表明,octaisooctyl-POSS与烷烃分子强烈的色散作用使其在烷烃溶剂中具有优良的溶解性能.     

含密胺基团新型酰胺类凝胶因子的合成、性能及Hansen溶度参数对凝胶行为的预估

设计合成了一种含有密胺基团的新型酰胺类凝胶因子AMOG,其在多种常用有机溶剂中均能形成凝胶,且在甲苯和二甲苯中形成凝胶的临界凝胶浓度(CGC)约为1 mmol/L.采用"试管倒转法"确定了凝胶的溶剂-凝胶转变温度(Tgel),利用SEM表征了凝胶的微观结构,发现AMOG具有明显的溶剂效应.运用溶剂的Hansen溶度参数探索溶剂对凝胶行为的作用机制,发现溶剂的氢键作用参数(δh)对凝胶的微观结构和凝胶性质有显著影响:AMOG在1.0 MPa~(1/2)δh4.1 MPa~(1/2)的溶剂中形成透明凝胶,在4.1 MPa~(1/2)δh8.0MPa~(1/2)的溶剂中为不透明凝胶,在δh8.0 MPa~(1/2)的溶剂中为沉淀或溶液状态.进一步将溶剂的Hansen溶度参数以三维坐标(δ_d,δ_p和δ_h)表示,发现能使AMOG形成凝胶的溶剂主要集中在Hansen空间的特定区域内.实验结果表明,凝胶体系的溶液-凝胶转变温度主要受色散参数δ_d与极性参数δ_p的影响,氢键参数δh对其有微调的作用.     

偏氯乙烯共聚物/层状双金属氢氧化物纳米复合材料的制备与表征

通过硝酸根插层层状双金属氢氧化物(LDH)与可逆加成-断裂链转移(RAFT)试剂S,S’-对(α,α’-二甲基-α″-乙酸)三硫代碳酸酯(CTA)阴离子的离子交换制备CTA阴离子插层LDH,再通过原位RAFT活性自由基聚合制备偏氯乙烯-丙烯酸甲酯(VDC-MA)共聚物/LDH纳米复合材料.采用傅里叶变换红外光谱、元素分析和X-射线衍射、透射电子显微镜、凝胶渗透色谱仪和热失重仪表征了CTA阴离子插层LDH和纳米复合材料的结构和性能.结果表明,CTA阴离子可以置换硝酸根阴离子插入到LDH层间,LDH层间距由0.89 nm增大到1.50 nm;在原位RAFT聚合过程中,LDH逐渐剥离,LDH以纳米层板形式分散在VDC-MA共聚物基体中;VDC-MA共聚物数均分子量随加入的插层CTA阴离子含量增加而减小,聚合具有活性特征.此外,含量LDH的引入可明显提高VDC-MA共聚物的热稳定性.     

1,4-丁炔二醇与4,4′-二乙炔联苯共聚物的合成及表征研究

本文用(Ph_3P)_2PdCl_2为催化剂,合成了1,4-丁炔二醇(BD)与4,4-二乙炔联苯(DEBP)共聚物。对用不同比例的两种单体得到的共聚物测定了比重(d_4~(25)、溶胀度(θ_D)、最良溶剂及相邻两交联点之间的平均分子量(M_c)。实验表明,在两种单体摩尔比中,DEBP用量越多,共聚物中泡状微孔越多,颜色越淡,溶胀度和比重越小,交联度越大;DEBP/BD(摩尔比)大于1/5时,共聚物的最良溶剂为苯,溶度参数为9.15卡~(0.5)·cm~(-1.5),是1/10时,其最良溶剂为乙醇,溶度参数是12.7卡~0.5·cm~(-1.5)。对共聚物还做了红外光谱表征。     

镁铝水滑石的有机改性实验研究

采用共沉淀法合成了对甲基苯磺酸有机插层改性的镁铝水滑石,用XRD、FTIR、TG-DSC等技术表征产物特征.研究表明,合成的对甲基苯磺酸插层LDH物相纯净、结晶度高,层间无硝酸根,而且2:1型有更好的晶形;2:1型对甲基苯磺酸插层LDH在450-500℃层状结构逐渐被破坏,而3:1型在400-460℃0层状结构被破坏....     

Synthesis and characterization of 10-hydroxycamptothecin – sebacate – layered double hydroxide nanocomposites

10-Hydroxycamptothecin (HCPT) as a hydrophobic anticancer drug brings many challenges in the clinical applications due to its poor water solubility and the presence of a chemically unstable lactone ring. In this work, the nanocomposites of HCPT intercalated layered double hydroxide (LDH) were prepared by a secondary intercalation method, and the encapsulated HCPT could keep the biologically active lactone form. A Zn–Al–NO₃ LDH was pillared with sebacate anions by a co-precipitation method in an aqueous medium, and then HCPT was intercalated into the LDH's gallery via hydrophobic interaction in an ethanol medium. The parallel alkyl chains of perpendicularly arranged sebacate anions in the LDH gallery provide a hydrophobic space for the drug intercalation. The in vitro release kinetics of HCPT from the nanocomposites could be fitted with the pseudo-second-order kinetic model, and the diffusion of HCPT through the LDH particles played an important role in controlling the drug release. The nanocomposites can be considered as a potential drug delivery system.     

10-羟基喜树碱-癸二酸-LDH杂化物的制备及性能

采用二次插层法成功制备了10-羟基喜树碱(HCPT)-癸二酸(SC)插层的层状双金属氢氧化物(LDH). 先采用共沉淀法制备SC柱撑LDH杂化物(SC-LDH), 再在乙醇介质中将HCPT插入LDH层间形成HCPT-SC-LDH纳米杂化物. 依据SC和HCPT的分子尺寸和纳米杂化物的通道高度, 推测SC分子在层间可能为双层排列, SC分子两端的羧基同时键合在同一个LDH层片表面上; HCPT分子插入(或溶入)SC分子碳氢链形成的疏水区中. 所制备的纳米杂化物既可稳定HCPT的内酯环, 又可明显提高HCPT的溶解度, 还具有明显的药物缓释效果, 其释放动力学过程符合准二级动力学方程.     

Novel self-organization of polymer particles on hydrophobic solid surfaces through hydrophobic interaction

A novel technique of particle monolayer fabrication based on hydrophobic interactions in aqueous systems is described in this paper. When alkylated glass plates modified with various silane coupling agents were immersed in aqueous dispersions of submicron-sized polystyrene particles of cationic or anionic surface charges, cationic particle monolayers containing active ester groups were effectively formed at the plate surfaces, whereas no anionic particles were self-organized on the plate surfaces. The coverage of the plates with cationic particles and the morphology of the monolayers varied with the hydrophobicities of the particles and plates as well as with the ionic strength of the medium and temperature. For less hydrophobic methylated glass surfaces modified with methyltriethoxysilane, cationic particles were self-organized at relatively regular intervals, whereas they were self-organized in the form of aggregates for the more hydrophobic octadecylated glass plates treated with n-octadecyltriethoxysilane. Closely packed monolayers were fabricated by adjusting ionic strength and temperature. Fluorescence labelling of cationic particle monolayers was successfully accomplished by the reaction of remaining active ester groups on the monolayers with a fluorescence probe containing amino groups. Cationic particle monolayers were physically stabilized by heating above the glass transition temperature (T _g) of the particles.     

反气相色谱法与Hansen溶解度参数法测定聚乙烯醇溶解度参数及相关热力学性质

采用反气相色谱（IGC）法,以聚乙烯醇（PVA）为固定相,脂肪族、芳香族、醇、酮及卤代烃5类18种化合物为探针分子,研究PVA的溶解性质并获得了PVA在383.15～423.15 K范围内的溶解度参数（δ₂）及相关热力学性质,并与Hansen溶解度参数法（HSP）测得的溶解度参数（δ_T）进行比较。结果表明,5类溶剂对PVA溶解能力的趋势为酮类 >醇类 >卤代烃、芳香类、脂肪族类>脂环族,卤代烃、芳香类和脂肪族类溶剂的溶解能力相似;在测试温度范围内PVA的δ₂随温度升高而增加;采用IGC法外推出室温（298.15 K）下PVA的δ₂为27.69 （J/cm³）^0.5,与HSP法测得室温下PVA的δ_T（27.77 （J/cm³）^0.5）一致。PVA溶解度参数及相关热力学参数的研究为其应用及相关研究提供了定量依据。     

反气相色谱法测定有机溶剂型木质素的溶解度参数

采用反气相色谱法(IGC),于333.15～373.15 K温度范围内测定了有机溶剂型木质素的溶解度参数(δ2)及相关指标。以正辛烷(n-C8)、正癸烷(n-C10)、正十二烷(n-C12)和正十四烷(n-C14)为探针溶剂,计算了探针溶剂的特性保留体积(V0g)、摩尔吸收焓(ΔHs1)、无限稀释摩尔混合焓(ΔH∞1)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与有机溶剂型木质素的Flory-Huggins相互作用参数(χ∞12)。结果表明,上述4种探针溶剂在测定的温度范围内均为有机溶剂型木质素的不良溶液;在同一温度下,参数χ∞12随着探针溶剂碳数的增加而降低。测得的有机溶剂型木质素的δ2为19.03 (J\5cm-3)1/2。     

液化膜对胶体悬浮液粘度的影响

Viscosity is one of the most important properties of colloids in mixing, transportation, stabilization, energy consumption, and so on. According to Einstein‘s viscosity equation, the viscosity of a colloidal dispersion increases with the increase of particle concentration. And the equation can be applicable to all micro-particle dispersions, because the effect of solvation films coated on particles can be neglectable in that case. But with the decrease of particle size to nano-scale, the formation of solvation films on nano-particles can greatly affect the viscosity of a dispersion, and Einstein‘s equation may not be applicable to this case. In this work, one kind of micro-size silica particle and two kinds of nano-size silica particles were used to investigate the effect of solvation films on dispersion viscosity, dispersed in water and ethyl alcohol solvents, respectively. The results of theoretical calculation and experimental investigation show that the increase of viscosity is contributed from solvation films by more than 95 percent for nano-particle dispersions, while less than 10 percent for micro-particle dispersions.     

LDH as Nanofiller: Organic Modification and Dispersion in Polymers

Summary: Layered double hydroxide (LDH) is a relatively new class of layered crystalline clay materials to be used as nanofiller in various polymer matrices. We report here the organic modification of LDH by anionic surfactants having different sizes and functionalities. Subsequently, their dispersion in polymer is discussed and finally the characteristics of the polymer/LDH nanocomposites are investigated. LDH has been modified using regeneration method, which shows that irrespective of size and functionality of the anionic surfactant, organic modification can be carried out efficiently. However, it has been observed that alkyl sulfonate are more efficiently intercalated within LDH layers than other surfactants giving well defined crystal structure of the modified LDH. These modified LDH, when dispersed in polymers like maleic anhydride grafted polyethylene shows that not only the size of the surfactant, but also the functionality of the surfactant influences their dispersion in a non polar polymer matrix.     

反气相色谱测定非对称双阳离子型离子液体的溶解度参数

在343.15~363.15 K下采用反气相色谱法对实验室合成的3种非对称双阳离子型离子液体[PyC₅Pi]NTf₂]₂、[MpC₅Pi]NTf₂]₂和[PyC₆Pi]NTf₂]₂的溶解度参数进行了测定。以正辛烷、正癸烷、正十二烷、正十四烷和正十六烷作为探针溶剂,计算了在不同温度下探针溶剂在3种离子液体中的特性保留体积(V_g⁰)、摩尔吸收焓(ΔH₁^S)、无限稀释摩尔混合焓(ΔH_l^∞)、摩尔蒸发焓(ΔH_v)、无限稀释活度系数(Ω₁^∞)以及探针溶剂与3种离子液体的Flory-HuggirIs相互作用参数(χ₁₂^∞),得到了室温下3种离子液体的溶解度参数(δ₂)为28.52~32.66 (J·cm^-3)^1/2。分子结构中含有4-甲基吗啉比含有吡啶时溶解度参数更大。随着两个阳离子间连接基碳数的增加,溶解度参数增大。这一结果对研究离子液体的溶液性质和应用有指导作用。     

Intercalation behavior of amino acids into Zn-Al-layered double hydroxide by calcination-rehydration reaction

The intercalation of amino acids for the Zn-Al-layered double hydroxide (LDH) has been investigated by the calcination-rehydration reaction at 298 K using mainly phenylalanine (Phe) as a guest amino acid. The Zn-Al oxide precursor prepared by the calcination of Zn-Al-carbonated LDH at 773 K for 2 h was used as the host material. The amount of Phe intercalated by the rehydration was remarkably influenced by the initial solution pH and reached ca. 2.7 times for anion exchange capacity (AEC) of the LDH at neutral and weak alkaline solutions, suggesting that Phe was intercalated as amphoteric ion form into the LDH interlayer. As Phe is intercalated for the LDH as monovalent anion in alkaline solution, the amount of Phe intercalated at pH 10.5 corresponded with AEC of the LDH. The solid products were found to have the expanded LDH structure, which confirmed that Phe was intercalated into the LDH interlayer as amphoteric ion or anion form. The basal spacing, d₀₀₃, of the Phe/LDH was 1.58 nm at pH 7.0 and 0.80 nm at pH 10.5; two kinds of expansion suggested for Phe in the interlayer space as vertical (pH 7.0) and horizontal (pH 10.5) orientations. The intercalation behavior of various amino acids for the LDH was also found to be greatly influenced by the feature of the amino acid side-chain, namely, its carbon-chain length, structure and physicochemical property. In particular, α-amino acids possessing a hydrophobic or negative-charged side-chain were preferentially intercalated for the LDH.