Foams are mainly composed of dispersed gas trapped in a liquid or solid phase making them lightweight and thermally insulating materials. Additionally, they are applicable for large surfaces, which makes them attractive for thermal insulation. State-of-the-art thermally insulating foams are made of synthetic polymeric materials such as polystyrene. This work focuses on generating foam from surfactants and renewable lignocellulosic materials for thermally insulating stealth material. The effect of two surfactants (sodium dodecyl sulphate (SDS) and polysorbate (T80)), two cellulosic materials (bleached pulp and nanocellulose), and lignin on the foaming and stability of foam was investigated using experimental design and response surface methodology. The volume-optimized foams determined using experimental design were further studied with optical microscopy and infrared imaging. The results of experimental design, bubble structure of foams, and observations of their thermal conductivity showed that bleached pulp foam made using SDS as surfactant produced the highest foam volume, best stability, and good thermal insulation. Lignin did not improve the foaming or thermal insulation properties of the foam, but it was found to improve the structural stability of foam and brought natural brown color to the foam. Both wet and dry lignocellulosic foams provided thermal insulation comparable to dry polystyrene foam.
Graphical abstractIn this study, the effect of pectin extraction method on the properties of cellulose nanofibers (CNFs) isolated from sugar beet pulp (SBP) was studied. Pectin was extracted by the industrially practiced method by sulfuric acid hydrolysis or by enzymatic hydrolysis using a cellulase/xylanase enzymes mixture. The CNFs were then isolated by high-pressure homogenization and investigated in terms of their chemical composition, crystallinity, size, degree of polymerization, and re-dispersion in water after freeze-drying. The mechanical properties and surface characteristics of CNF films were also studied. The results showed that fibrillation of the de-pectinated SBP was more efficient for the acid hydrolyzed SBP. CNFs from the acid-hydrolyzed SBP had a slightly wider diameter, higher crystallinity, viscosity, and α-cellulose content but a lower degree of polymerization than CNFs from the enzyme-hydrolyzed SBP. Owing to the presence of more residual hemicelluloses in the CNFs from the enzyme-hydrolyzed SBP, the CNFs had higher re-dispersion ability in water. CNF films from enzyme-hydrolyzed SBP displayed slightly better mechanical properties and higher water contact angle than acid-hydrolyzed CNF films.
Graphic abstractCellulose-based triboelectric nanogenerators (TENGs) can provide power for various monitoring devices and are environmentally friendly and sustainable. Chemical functional modification is a common method to improve the electrical output performance of cellulose-based TENGs. In this work, an environmentally friendly high-performance triboelectric nanogenerator based on a polydopamine/cellulose nanofibril (PDA/CNF) composite membrane and fluorinated ethylene propylene was developed. Dopamine generates polydopamine nanoparticles through oxidative self-polymerization and adheres to the surface of nanofibers. The synergistic effect of amino group introduction and membrane surface microstructure effectively enhanced the output performance of TENGs to a certain extent. The effects of PDA content, CNF composite film thickness and different working conditions on the electrical output were systematically investigated. The optimized PDA/CNF-TENGs exhibited an enhanced electrical output performance with voltage, current, and power density values of ≈205 V, ≈20 µA, and ≈48.75 μW·cm?2, respectively. The PDA/CNF-TENGs exhibited stable and identifiable signals when used as a self-powered sensor for human motion monitoring, showing the potential prospects of cellulose materials for TENGS and other electronic applications.
Graphical abstractIn this paper, we developed a microbial route to fabricate wood-inspired biomimetic composites comparable to natural wood. Focusing on the chemical composition of woody biomass, we performed in situ bioprocessing of bacterial cellulose (BC) imbibed in modified cationic lignin (Catlig), which exhibited significant bioactivity in improving the microbial growth dynamics. The structural and morphological characteristics were enhanced by the formation of hydrophobic and electrostatic interactions between BC and Catlig during biosynthesis. Microbially derived BC/Catlig composites exhibited enhanced thermal stability and crystallinity, with oriented cellulose fibers. The tensile properties, toughness, and specific strength of BC/Catlig composites were comparable to those of a heavy wood species (Zelkova serrata) under hydrated conditions and synthetic soft materials.
Graphic abstractHerein, cellulose nanofibrils (CNF), alkali lignin (AL), and montmorillonite (MMT) were used to produce reinforced polyvinyl alcohol (PVA) hydrogels. The effects of MMT and AL contents on the rheological properties of reinforced hydrogel were studied. Compared with PVA/CNF hydrogel, the storage modulus of 40 wt% MMT-reinforced PVA hydrogel was increased by 41.4%. The rheological properties of MMT-enhanced PVA hydrogel could be adjusted by the variation of MMT loading. Also, as the PVA matrix had a synergistic effect with the embedded MMT and AL, the composite hydrogel demonstrated high efficiency in the removal of methylene blue dye (MB) from wastewater. Adsorption tests conducted at various time intervals (60–360 min) show that the hydrogels containing same content of MMT had higher removal efficiency. The MB adsorption of PVA/2CNF-0Li-40MMT was over 98.0%, whereas its adsorption equilibrium time and maximum adsorption capacity (qm) were 360 min and 67.2 mg/g, respectively. However, an extremely high content of MMT reduced the MB adsorption rate.
Graphic abstractBacterial cellulose (BC) is a polymer with interesting conformation and properties. BC can be obtained in different shapes and is easily modified by chemical and physical means, so its applications in the production of new materials and nanocomposites for different purposes have been in the focus of many research projects. However, one of the major challenges to address in bacterium-derived polymer technology is to find suitable carbon sources as substrates that are cheap and do not compete with food production for achieving large scale industrial applications. Agricultural wastes are defined as the residues from the growing and processing of raw agricultural products such as crops, fruits, vegetables and dairy products. Their composition can vary depending on the type of agricultural activity and harvesting conditions, but these residues are suitable for the production of BC. The aim of this review is to give insight into the production of BC using agro-wastes and an overview of the most interesting and novel applications of this biopolymer in different areas i.e. environmental applications, optoelectronic and conductive devices, food ingredients and packaging, biomedicine, and 3D printing technology.
Graphic abstractThe development of a simple surface barrier discharge plasma device is presented to enable more widespread access to and utilization of plasma technology. The application of the plasma device was demonstrated for pretreatment of wood prior to application of protective coatings for outdoor usage. The coatings' overall performance was increased, showing a reduction or absence of cracking due to weathering on plasma-pretreated specimens. Moreover, after ten months of outdoor weathering, the plasma-pretreated specimens showed fewer infections with biotic factors and improved adhesion performance in cross-cut tests, while the surface gloss performed independently from plasma pretreatment. In contrast to that, plasma-pretreated specimens were slightly more prone to discoloration due to outdoor weathering, whereas the plasma pretreatment did not impact the initial color after coating application.
Graphic abstractCellulose nanocrystals (CNCs) with high crystallinity exhibit high mechanical stiffness and strength. However, the high dispersibility of CNCs results in limited spinnability and orientation. In this study, oxidized nanocellulose was selected to obtain regionally oxidized CNCs (RO-CNC) with carboxyl groups appended. For the formation of orientable and extensible RO-CNC filaments, chitosan was introduced as the sheath solution to induce orientation by electrostatic action. The chemical structures were analyzed by Fourier transform infrared spectroscopy. The morphology of the oriented CNCs filaments was characterized by scanning electron microscopy and wide-angle X-ray scattering. Analysis of the relationship between the mechanical strength and the CNCs directional arrangement revealed that the mechanical strength of the composite fibers increased with the injection speed ratio as a result of the orientation of the RO-CNC. The mechanical strength of the oriented reinforced composite filaments reached as high as 104 MPa with an orientation index of 0.73. The tensile strength and elastic modulus of the filaments increased by 33% and 20%, respectively, compared to the unmodified CNCs spun fiber.
Graphic abstractThe present work aims to investigate the feasibility of oxalic acid-choline chloride deep eutectic solvent (OA-ChCl DES), which serves as a promising green solvent that utilized in the acidic deep eutectic solvent (DES) hydrolysis. Oxalic acid-choline chloride DES cellulose nanocrystal (OA-ChCl DES CNC) was isolated from the bleached DES treated pulp (BP) through the acidic DES hydrolysis using 1:1 molar ratio of OA-ChCl DES. The functional groups, crystallinity index, morphological structure, particle size, zeta potential, thermal stability and surface chemistry of the OA-ChCl DES CNC were compared with the sulphuric acid cellulose nanocrystal (SA-CNC) that prepared via sulphuric acid hydrolysis. The findings revealed the presence of negatively charged carboxyl groups on OA-ChCl DES CNC surface after the acidic DES hydrolysis. The physicochemical analyses verified that the OA-ChCl DES CNC was in nano-sized range with polydispersity index (PdI) of 0.56, indicating slightly monodispersed nanoparticles. A stable OA-ChCl DES CNC colloidal suspension with zeta potential value of ?52.1?±?5.2 mV was obtained. The OA-ChCl DES CNC outweighed the SA-CNC in term of thermal stability (288 °C) despite having a slightly lower crystallinity index (76.7%). In fact, the OA-ChCl DES CNC with a yield of 55.1% was achieved through the acidic DES hydrolysis, suggesting that the OA-ChCl DES was capable of promoting efficient cleavage of strong hydrogen bonds in BP.
Graphic abstractVulcanized fibers are all-cellulose materials made from cotton and/or wood cellulose after aqueous zinc chloride treatment. These materials were invented in the UK in the mid-nineteenth century and is widely used because of their excellent characteristics, such as impact resistance and electrical insulation. Recently the matured vulcanized fibers have been recognized as renewable and biodegradable materials and reevaluated with advanced cellulose technologies derived from cellulose nanofibers (CNFs) and all-cellulose composites. The microscopic analysis based on the improved freeze-drying method revealed that the strength of vulcanized fiber sheets can be attributed to the chemically defibrillated CNFs. The architecture is similar to all-cellulose composites made from the same raw materials in which the residual cellulose fibers serve as reinforcement, and the CNFs serve as adhesives or matrix components. In this report, we describe the history and structural characteristics of vulcanized fibers and introduce a new aspect in aqueous zinc chloride treatment of cellulose.
Graphical abstractInspired by mussels, a new cellulose-based (CTP) adhesive was fabricated by simply blending via cellulose nanofibrils (CNFs), tannic acid (TA), and polyethyleneimine (PEI), where the preparation method was green, facile, and simple. The structure and properties were examined by FT-IR, TGA, XRD, SEM, lap shear tensile, and water absorption tests. The results showed that chemical bonds, hydrogen bonds, and chain entanglement were formed among CNFs, TA, and PEI. Compared with the CNF adhesive, the dry shear strength of the CTP adhesive increased 103% to 392.2?±?32.2 kPa. And the wet shear strength of CTP adhesive increased from 0 kPa to 144.7?±?20.1 kPa, indicating that the CTP adhesive can be used in humid or even water environments. Meanwhile, the water absorption of CTP adhesive decreased from 37.9?±?14.1% to 12.8?±?5.9%. It was the introduction of catechol groups and physical–chemical interactions of three components that endow the CTP adhesive with improved dry and wet adhesion strength and water resistance. Moreover, the proposed CTP adhesive could be used on the surface of various materials, including rubber, plastic, paper, wood, metal, and glass. Overall, this work shows that the CTP adhesive has a wide range of application prospects.
Graphical abstractThis study prepared a waterproof cellulose nanofibril (CNF) sheet via the deposition of an alkyl ketene dimer (AKD) on the sheet’s controlled porous structure. The porosity of the CNF sheet was controlled by drying under different conditions, which included hot-press drying (HD) and solvent-exchange drying (SD), and the effect on the hydrophobization and water-related barrier performance of the sheet were investigated. When the SD sheet was immersed in an AKD wax solution, the sheet exhibited super-hydrophobicity and a lower water vapor transmission rate, compared with the HD sheet. This indicated that the porous structure of the SD sheet enabled AKD to be adsorbed on both the surface and the inner surface and it filled in the pores of the sheet, thereby giving rise to excellent waterproofing properties. The performance of a hydrophobized SD sheet as a water barrier material was comparable to a linear low-density polyethylene film. This study confirms the possibility for AKD wax to be immersed in a porous CNF sheet and used as a potential barrier material in hydrogel packaging.
Graphical abstractOceans and soils have been contaminated with traditional plastic due to its lack of degradability. Therefore, green biopolymer composites reinforced with cellulose nanocrystal-zinc oxide hybrids (ZnO hybrids) with good biodegradation ability provided a positive impact on reducing environmental challenges. In this work, the effect of various morphologies of ZnO hybrids on the biodegradation ability of poly(butylene adipate-co-terephthalate), PBAT) under seawater, soil burial, and UV aging conditions were investigated. Sheet-like ZnO hybrids (s-ZnO hybrid) efficiently enhanced the mechanical, UV-blocking properties and biodegradation ability of PBAT nanocomposite films. Compared to neat PBAT, the best tensile strength of PBAT nanocomposite with 2 wt% s-ZnO hybrid was increased by 15.1%, meanwhile this nanocomposite films showed the highest biodegradation rate after 80 days of soil degradation and 90 days of seawater degradation. Besides, three possible biodegradation mechanisms of green PBAT nanocomposite films were presented, hinting that such PBAT nanocomposite have great promising packaging applications.
Graphic abstractA simple and efficient method for the synthesis of pyrazolopyranopyrimidines under solvent-free has been developed. The one-pot multicomponent condensation of arylaldehydes with hydrazine hydrate, ethyl acetoacetate and barbituric acid in the vicinity of a mesoporous basic nanomagnetic catalyst, namely DBU immobilized on Fe3O4@nSiO2@mSiO2 was synthesized in remarkably high yields and in short reaction times. Significantly, this catalyst can be easily separated from the reaction media by applying an external magnet, and can be reused for several cycles.
Graphical abstractAn eco-friendly method for diversity-oriented synthesis of substituted dihydropyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives has been achieved via one-pot and multicomponent reaction in the presence of PdO/Al-SBA-15 as an efficient and recyclable catalyst in H2O/EtOH under reflux conditions. The significant merits of this method are wide scope, high yields of the desired products, short reaction times and simple workup procedure. In addition, this nanocatalyst was simply recovered and reused five times without significant loss in catalytic activity and also performance.
Graphical abstractAn efficient and convenient procedure for the synthesis of novel 6-hydroxy-14-aryl-8H-dibenzo[a,i]xanthene-8,13(14H)-dione derivatives has been developed by one-pot, three-component condensation reaction between 2-hydroxynaphthalene-1,4-dione, aromatic aldehydes and 2,3-naphthalenediol in glacial acetic acid under reflux conditions. This domino reaction implies Knoevenagel condensation, Michael addition, intramolecular cyclization and dehydration. The reaction avoids tedious workup procedure due to the direct precipitation of products from the reaction medium. The notable features of this domino transformation are operational simplicity, clean reaction, easy handling, easy purification process and high yields of the products.
Graphical abstractAn integrated aero-cryogel (A-CG) monolith with hierarchical porous structure was developed by inter-crosslinking of cellulose nanofiber/polylactic acid nanocomposite aerogel and carboxymethyl cellulose (CMC) cryogel (CG). The photothermal nanoparticles-enriched CMC CG phase served as a sunlight absorbing layer, exhibiting a broadband sunlight absorption of 98%. Due to the large amount of weakly bounded water molecules, the swelled CMC CG possessed a lower evaporation enthalpy than that of pure water, which facilitates water evaporation, while the nanocomposite aerogel phase acted as an excellent thermal insulator and afforded highly efficient water transport channels. Thus, the developed A-CG monolith supported by insulated polystyrene foam to protrude above the water surface, could reach an evaporation rate of 2.16 kg m?2 h?1 under an irradiation of 1 Sun (100 mw/cm2) with an efficiency of 93.6%. More remarkably, when the wind energy was imparted, an evaporation rate of 5.67 kg m?2 h?1 was achieved at a wind speed of 3 m s?1. The high-efficiency purification outcomes of various raw water demonstrate the great potentials of A-CG material in solar vapor generation.
Graphical abstractIn this work, the effects of a chitosan-based derivative (CSA), DOPO (9, 10-dihydro-9-oxa-10- phosphaphenanthreene-10-oxide) and CSA-DOPO additives on the flammable properties of EP (epoxy resin) composites were systematically studied, where CSA was synthesized by a facile condensation between chitosan (CS) and 9-anthralaldehyde. The mass ratio of CS and 9-anthralaldehyde in CSA was determined by elemental analysis and theoretical calculation. Under the 8% addition in EP, EP/2.66%/5.34%DOPO sample was the only one passing the UL-94 V-0 rating and exhibiting the highest LOI value of 36.4%. The cone calorimeter test (CC) showed that the total smoke emission value and the peak heat release rate of the EP/2.66%/5.34%DOPO decreased by 36.0% and 61.9%, and the residual char amount increased by 151%, respectively, when compared with EP. Moreover, the incorporation of CSA/DOPO effectively improved the flexural strength by 52.3%. According to the results obtained from Py-GC/MS analyses for EP and EP/2.66%CSA/5.34%DOPO samples, together with Raman spectra, XPS (X-ray photoelectron spectra) for their char residues, and the real time FTIR (Fourier-transform infrared) spectra at different pyrolysis temperatures and cone calorimeters, it was proposed that CSA/DOPO played roles in both gaseous and condensed phases, and the synergistic effect of CSA and DOPO significantly improved the flame retardancy and mechanical strength of EP.
Graphical abstractWe study the thermal decomposition of cellulose using molecular simulations based on the ReaxFF reactive force field. Our analysis focuses on the mechanism and kinetics of chain scission, and their sensitivity on the condensed phase environment. For this purpose, we simulate the thermal decomposition of amorphous and partially crystalline cellulose at various heating rates. We find that thermal degradation begins with depolymerization via glycosidic bond cleavage, and that the order of events corresponds to a randomly initiated chain reaction. Depolymerization is followed by ring fragmentation reactions that lead to the formation of a number of light oxygenates. Water is formed mainly in intermolecular dehydration reactions at a later stage. The reaction rate of glycosidic bond cleavage follows a sigmoidal reaction model, with an apparent activation energy of 166?±?4 kJ/mol. Neither the condensed phase environment nor the heating programme have appreciable effects on the reactions. We make several observations that are compatible with mechanisms proposed for cellulose fast pyrolysis. However, due to the absence of anhydrosugar forming reactions, the simulations offer limited insight for conditions of industrial interest. It remains unclear whether this is a natural consequence of the reaction conditions, or a shortcoming of the force field or its parameter set.
Graphic abstractUniformly-sized porous cellulose beads functionalized with amidoxime groups were prepared for the first time using a microfluidic method with N-methylmorpholine N-oxide (NMMO) monohydrate as a cellulose solvent. The molten state cellulose dope in NMMO monohydrate (cell/NMMO dope) as a disperse phase and hot mineral oil as a continuous phase were used in a T-junction microfluidic chip to produce uniformly-sized cell/NMMO droplets. Coagulation of the molten state cell/NMMO droplet at high temperature and amidoxime functionalization could prepare the highly-porous spherical amidoxime-functionalized cellulose beads with a uniform fibrous open internal structure. The prepared amidoxime-functionalized cellulose beads showed excellent metal adsorption properties with a maximum adsorption capacity of?~?80 mg g?1 in the case of Cu2+/phthalate ions. The newly developed highly-porous cellulose beads can open many new applications with other proper functionalization at the reactive hydroxyl groups of the cellulose.
Graphic abstract