高居里温度铁电单晶PIN-PT的机电性能

弛豫铁电单晶Pb(In_1/2Nb_1/2)O₃-PbTiO₃(PIN-PT)相较于常用的Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃(PMN-PT)具有更高的居里温度,在高稳定性、高性能的传感器、换能器方面具有应用前景。本工作采用谐振法研究了[001]方向极化的0.66PIN-0.34PT铁电单晶的全矩阵机电性能参数。0.66PIN-0.34PT 单晶的三方-四方相变温度(T_RT)约为160 ℃,居里温度(T_C)约为260 ℃,室温压电系数d₃₃、d₃₁、d₁₅分别为1 340 pC/N、-780 pC/N、321 pC/N,介电常数ε^T₃₃、ε^S₃₃、ε^T₁₁、ε^S₁₁分别为2 700、905、2 210、1 927,机电耦合系数 k₃₃、k₃₁、k₁₅、k_t分别为 87%、58%、38%、61%。其纵向压电常数(d₃₃)和纵向机电耦合系数(k₃₃)小于 PMN-PT 单晶,但是横向压电性能(d₃₁)和剪切压电性能(d₁₅)都略高于PMN-PT单晶。另外,研究了机电耦合性能随温度的变化趋势,发现0.66PIN-0.34PT单晶在150 ℃以下有较好的温度稳定性。     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

Monitoring the Thiol/Thiophenol Molecule-Modulated Plasmon-Mediated Silver Oxidation with Dark-Field Optical Microscopy

Surface plasmon can trigger or accelerate many photochemical reactions, especially useful in energy and environmental industries. Recently, molecular adsorption has proven effective in modulating plasmon-mediated photochemistry, however the realized chemical reactions are limited and the underlying mechanism is still unclear. Herein, by using in situ dark-field optical microscopy, the plasmon-mediated oxidative etching of silver nanoparticles (Ag NPs), a typical hot-hole-driven reaction, is monitored continuously and quantitatively. The presence of thiol or thiophenol molecules is found essential in the silver oxidation. In addition, the rate of silver oxidation is modulated by the choice of different thiol or thiophenol molecules. Compared with the molecules having electron donating groups, the ones having electron accepting groups accelerate the silver oxidation dramatically. The thiol/thiophenol modulation is attributed to the modulation of the charge separation between the Ag NPs and the adsorbed thiol or thiophenol molecules. This work demonstrates the great potential of molecular adsorption in modulating the plasmon-mediated photochemistry, which will pave a new way for developing highly efficient plasmonic photocatalysts.     

Ba7AgGa5S15:一种新型混合金属硫化物的非线性光学性能研究

采用高温熔融-自发结晶法成功获得一种新型混合金属硫化物Ba7AgGa5S15.该化合物结晶于非中心对称的P31c空间群(No.159),晶胞参数为a=0.964 53(10) nm,c=1.805 9(4) nm,Z=2.其结构是由[Ga4 S10] T2超四面体与[AgS4]四面体共顶点连结形成的含有18元环孔道的三维网状框架,孤立的[Ga(2)S4]四面体填充在孔道中,Ba2+填充在该三维框架结构的空隙当中.第一性原理计算研究了该化合物的电子结构、态密度、双折射率、二阶非线性光学系数,以及倍频密度.结果 表明,该化合物具有大的光学带隙(3.76 eV),其带隙主要由S3p,Ba5d和Ga4s轨道决定;其d33方向上的倍频系数约为AgGaS2的0.4倍,主要倍频贡献来源于[AgS4]和[GaS4]四面体.该研究表明在Ag-Ga-S体系中引入Ba2+,形成的Ba7 AgGa5S15表现出比AgGaS2更宽的带隙,有利于产生高的激光损伤阈值(LDT).     

三维非连续变形分析方法碰撞分析及其应用

将具有完备动力学理论的非连续变形分析(DDA)方法应用于块体碰撞研究。基于三维DDA(3D DDA)方法,按时步输出块体碰撞过程速度变化和接触嵌入量,进而得到块体碰撞恢复系数、冲量、冲击力。以此为参考指标,采用斜抛、面-面对心等碰撞模型,验证3D DDA方法模拟块体碰撞的有效性,并将3D DDA方法应用于多米诺骨牌倾倒、滚石边坡成灾及防护等算例分析,探讨了多米诺骨牌倾倒机制、滚石启动及运动行为、滚石灾害防护方案。结果表明:多米诺骨牌间距越大,同一块体被碰撞时间越迟,其最终稳定时间也越迟,与下一块体碰撞的动能越大;滚石运动呈侧向平动及转动三维运动特征,每一次碰撞,均引起动能、轨迹或状态的显著变化;滚石拦挡设施弹簧刚度越大,越先达到最大冲击力,最大冲击力随弹簧刚度的增加而减小;可结合树木阻挡效应,耗散滚石动能,降低滚石飞跃高度,使滚石灾害减轻或控制在防护范围以内。     

Manipulating the Click Reactivity of Dibenzoazacyclooctynes: From Azide Click Component to Caged Acylation Reagent by Silver Catalysis

Strain-promoted azide–alkyne cycloaddition using dibenzoazacyclooctyne (DBCO) is widely applied in copper-free bioorthogonal reactions. Reported here is the efficient acid-promoted rearrangement and silver-catalyzed amidation of DBCO, which alters its click reactivity robustly. In the switched click reaction, DBCO, as a caged acylation reagent, enables rapid peptide/protein modification after decaging facilitated by silver catalysts, rendering site-specific conjugation of an IgG antibody by a Fc-targeting peptide.     

DNAzyme-Mediated Genetically Encoded Sensors for Ratiometric Imaging of Metal Ions in Living Cells

Genetically encoded fluorescent proteins (FPs) have been used for metal ion detection. However, their applications are restricted to a limited number of metal ions owing to the lack of available metal-binding proteins or peptides that can be fused to FPs and the difficulty in transforming the binding of metal ions into a change of fluorescent signal. We report herein the use of Mg²⁺-specific 10–23 or Zn²⁺-specific 8–17 RNA-cleaving DNAzymes to regulate the expression of FPs as a new class of ratiometric fluorescent sensors for metal ions. Specifically, we demonstrate the use of DNAzymes to suppress the expression of Clover2, a variant of the green FP (GFP), by cleaving the mRNA of Clover2, while the expression of Ruby2, a mutant of the red FP (RFP), is not affected. The Mg²⁺ or Zn²⁺ in HeLa cells can be detected using both confocal imaging and flow cytometry. Since a wide variety of metal-specific DNAzymes can be obtained, this method can likely be applied to imaging many other metal ions, expanding the range of the current genetically encoded fluorescent protein-based sensors.     

Nanobody-Ferritin Conjugate for Targeted Photodynamic Therapy

Ferritin is an iron-storage protein nanocage that is assembled from 24 subunits. The hollow cavity of ferritin enables its encapsulation of various therapeutic agents; therefore, ferritin has been intensively investigated for drug delivery. The use of antibody-ferritin conjugates provides an effective approach for targeted drug delivery. However, the complicated preparation and limited protein stability hamper wide applications of this system. Herein, we designed a novel nanobody-ferritin platform (Nb-Ftn) for targeted drug delivery. The site-specific conjugation between nanobody and ferritin is achieved by transglutaminase-catalyzed protein ligation. This ligation strategy allows the Nb conjugation after drug loading in ferritin, which avoids deactivation of the nanobody under the harsh pH environment required for drug encapsulation. To verify the tumor targeting of this Nb-Ftn platform, a photodynamic reagent, manganese phthalocyanine (MnPc), was loaded into the ferritin cavity, and an anti-EGFR nanobody was conjugated to the surface of the ferritin. The ferritin nanocage can encapsulate about 82 MnPc molecules. This MnPc@Nb-Ftn conjugate can be efficiently internalized by EGFR positive A431 cancer cells, but not by EGFR negative MCF-7 cells. Upon 730 nm laser irradiation, MnPc@Nb-Ftn selectively killed EGFR positive A431 cells by generating reactive oxygen species (ROS), whereas no obvious damage was observed on MCF-7 cells. Given that ferritin can be used for encapsulation of various therapeutic agents, this work provides a strategy for facile construction of nanobody-ferritin for targeted drug delivery.     

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.