杂质的添加对SrAl2O：Eu^2＋,Dy^3＋余辉发光特性的改善

采用溶胶－凝胶法制备SrAl2O4:Eu^2 ,Dy^3 磷光体,并在合成过程中添加硼或硅以探讨光致发光及长余辉发光性质。发现硼、硅添加物不仅是助熔剂,且能改良SrAl2O4:Eu^2 ,Dy^3 之长余辉的持续时间及余辉发光强度。基于不同磷光体样品的实验结果比较,综合材料表面微结构观察、X射线衍射图谱、热释发光光谱与余辉衰减曲线的测量等实验结果分析,推断在SrAl2O4:Eu^2 ,Dy^3 中添加硼、硅可导致磷光体缺陷增加并稳定活化剂Eu^2 的价态。     

微乳液法制备MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料及其发光性能

采用微乳液法合成了MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）长余辉发光材料，并对其晶体结构和发光性能进行了比较与讨论。XRD分析表明，所合成的Ca2O4：Eu^2＋，Dy^3＋，SrAl2O4：Eu^2＋，Dy^3＋粉体为单斜晶系结构，BaAl2O4：Eu^2＋，Dy^3＋粉体为六方晶体结构。MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料的激发光谱都为一宽带连续谱，表明从紫外至可见光均可有效的激发该材料。发射光谱的发射波长峰值分别为440nm（M=Ca），520nm（M=Sr）和496nm（M=Ba）。对应的发光颜色分别为蓝色、黄绿色和蓝紫色。余辉衰减曲线分为快衰减、中间过渡衰减和随后极长的慢衰减过程，符合双曲线方程I=At^-n，余辉亮度与时间顺序为Sr〉Ca〉Ba。     

（CaO）20．68（MgO）1．32（SiO2）4S2：Eu^2＋，Dy^3＋红光材料的制备与发光特性

研究了峰值波长651nm的红色发光材料（CaO）20.68（MgO）1.32（SiO2）4S2：Eu^2＋，Dy^3＋的制备及发光特性。通过XRD分析表明硫气氛中合成的材料为具有硫成分的硅酸盐相。红光发射带为硫元素进入晶格后在发光中心周围形成了类似长余辉材料CaS：Eu^2＋，Cl^-的局域结构。这也使材料具有了硫化物长余辉材料的发射光谱特征和硅酸盐材料高化学稳定性和高亮度的优点。热释光测量揭示它可能是一种潜在的红色长余辉材料。     

碱土金属离子（Mg^2＋，Ca^2＋，Ba^2＋）掺杂对长余辉荧光粉SrAl2O4：Eu^2＋，Dy^2＋发光性能的影响

采用高温固相法制备了碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）掺杂的SrAl2O4：Eu^2＋,Dy^3＋长余辉荧光粉。XRD谱分析表明,随着基质中掺入的碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）浓度增加,基质晶格常数也随之发生变化。Mg^2＋,Ca^2＋和Ba^2＋ 3种碱土离子在SrAl2O4中的固溶范围分别为40％,15％和30％。光谱分析则表明在固溶范围内随着掺杂Mg^2＋,Ca^2＋和Ba^2＋浓度的增大,样品的发射峰值会在480～530nm范围出现规律性移动。适当浓度的Mg^2＋,Ba^2＋掺杂会不同程度地提高样品的发光强度,而Ca^2＋的掺杂则会降低发光强度。但是碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）的掺杂并不能延长SrAl2O4：Eu^2＋,Dy^3＋荧光粉的余辉时间。     

纳米棒状MAl2O4:Eu2+, Dy3+(M=Sr, Ba)长余辉发光材料的制备与性能

利用硝酸铝、硝酸锶/硝酸钡、尿素为原料,以一定比例H2O/正丁醇/CTAB的混合液作传递压力的介质进行反应,然后将得到的前驱体在还原气氛下高温煅烧,得到亮度高、余辉时间长的MAl2O4∶Eu^2＋,Dy^3＋纳米结构长余辉发光材料。TEM测试表明,高温煅烧后得到的MAl2O4∶Eu^2＋,Dy^3＋均为棒状结构,其激发光谱和发射光谱均为宽带,主发射峰分别为513和498 nm,是典型的Eu^2＋5d→4f跃迁。在对单掺Eu^2＋与双掺Eu^2＋,Dy^3＋比较的过程中,明显发现双掺Eu^2＋和Dy^3＋的强度增加,且余辉增强。材料的余辉强度随时间的变化由最初的快减过程和随后的慢减过程组成,符合I=t^-1.1双曲线规律。该方法操作简单,在不同的温度和时间下均合成出了棒状MAl2O4∶Eu^2＋,Dy^3＋,不需球磨,可直接应用。     

稀土氧化钕对铝酸盐长余辉发光材料性能的影响

制备了SrAl2O4:Eu2 ,Nd^3 和SrAl2O4:Eu^2 ,Dy^3 ,Nd^3 长余辉材料,研究了所合成的材料在不同波段紫外光激发条件下的发光光谱和激发光谱的差异和Eu^2 ,Dy^3 ,Nd^3 的摩尔掺杂浓度对材料的余辉性能的影响等。     

Dy^3＋在Ba3La（B03）3中的光致发光

研究了Ba3La(BO3)3基质中Dy^3 的光致发光特性；探讨了RE^3 的电荷半径比(z／r)和Ce^3 ，Dy^3 含量对Dy^3 发光强度及发光颜色的影响；分析了Ba3La(BO3)3中Ce^3 对Dy^3 发光的敏化作用；确定了Dy^3 的^4F9／2→^6H15／2及^4F9／2→^6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用。     

Li+,Zn2+共掺杂对Gd2O3:Eu3+纳米粉结构和发光性能的影响

采用燃烧法制备出Li^＋,Zn^2＋掺杂的Gd2O3：Eu^3＋纳米荧光粉,研究了掺杂离子对Gd2O3：Eu^3＋的结晶性能、晶粒形貌和光致发光特性的影响.以X射线衍射（XRD）、透射电子显微镜（TEM）、发射光谱和衰减时间谱等手段表征材料性能.结果表明,Li^＋,Zn^2＋掺杂可显著提高Gd2O3：Eu^3＋纳米粉在611 nm处的发光强度,最大可达到未掺杂时的2.5倍.发光增强的主要原因可归结为3个方面： （1）使晶粒由单斜相向更利于发光的立方相转变; （2）氧空位的敏化剂作用; （3）掺杂离子的助熔剂效应,使晶粒的结晶性能提高、粒径增大,从而降低表面态引起的发光猝灭.     

白光LED用荧光材料Ba3Gd（BO3）3∶Eu^（3＋）的发光性能研究

用高温固相反应法制备了稀土离子Eu^3＋掺杂的三元稀土硼酸盐Ba3Gd（BO3）3发光材料,通过X射线衍射（XRD）、荧光光谱和扫描电镜（SEM）等测试手段对Ba3Gd（BO3）3∶Eu^3＋荧光粉的制备条件、发光性能以及形貌进行了研究。XRD结果表明,在1000℃时可得到Ba3Gd（BO3）3纯相。扫描电镜照片显示颗粒基本为球形,粒径约为200-400 nm。发光光谱测试表明,Ba3Gd（BO3）3∶Eu^3＋荧光粉在近紫外区（UV）（396 nm）和蓝光区（466 nm）可以被有效地激发,分别用255和396 nm的紫外光激发样品时,以Eu3＋的5D0-7F2（611和616 nm）超灵敏跃迁为主要发射峰。当Eu3＋的掺杂浓度为10%（摩尔分数）时,Ba3Gd（BO3）3∶Eu3＋在611和616 nm处的发光强度最大。因此,这种荧光粉是一种可能应用在白光LED上的红色荧光材料。     

SrZnO2:Eu3+, Li+长波紫外激发红光荧光体的合成及发光性能研究

采用高温固相法合成了一种长波紫外激发的SrZnO2：Eu^3＋, Li^＋发光材料, 用X射线衍射谱、荧光光谱对样品进行了表征. 结果表明, Eu^3＋离子在SrZnO2基质中主要占据Sr^2＋离子不对称性格位, 发射来源于5D0→7F2 612 nm为主的红光. 加入电荷补偿剂Li^＋离子能显著提高发光强度, 350～400 nm内的激发峰也有明显提高, 同时观察到来自Eu^3＋离子高能级5D1→7FJ（J=0～2）的跃迁发射, 并对其产生机制进行了初步探讨. 实验结果表明, SrZnO2：Eu^3＋, Li^＋是一种有发展前途的长波紫外激发红光荧光体.     

2-Formyl-3-Methoxymethylindole, 3-Ethoxymethyl-2-Formylindole and 2-Formyl-3-Methylindole

Base-catalysed hydrolysis of 2-formyl-3-methyl-1-phenyl-sulphonylindole results in the formation of 3-alkoxy-methyl-2-formylindoles. Cleavage of the 1-phenyl-sulphonyl group with sodium amalgam produces 2-hydroxymethyl-3-methylindole.     

Reciprocal system 3Tl2S + Bi2Se3 ↔ 3Tl2Se + Bi2S3

The reciprocal system 3Tl₂S + Bi₂Se₃ ? 3Tl₂Se + Bi₂S₃ has been investigated by DTA, X-ray powder diffraction analysis, and emf measurements. Some polythermal sections and the isothermal section at 500 K of the phase diagram and the projection of the liquidus surface of this system have been constructed, and the types and coordinates of the invariant and univariant equilibria have been determined. The existence of wide regions of quaternary solid solutions based on the binary compounds Tl₂S, Tl₂Se, Bi₂S₃, and Bi₂Se₃, and solid solutions between the temary compounds TlBiS₂ and TlBiSe₂ have been established.     

RbLi2Ga2(BO3)3

The structure of rubidium dilithium digallium tris­(borate), RbLi₂Ga₂(BO₃)₃, contains two‐dimensional sheets of open‐branched rings of GaO₄ tetrahedra and planar BO₃ triangles that are joined by LiO₄ tetrahedra to form a three‐dimensional framework. Ten‐coordinate Rb atoms lie on twofold axes and occupy channels within the framework that extend along the b axis.     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系光谱性质的研究

根据稀土离子能级的特点,对Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系的光谱性质进行了探讨,发现它们有二类发光性质:Stokes发光和反Stokes发光,研究了发光强度和发射波长与掺杂离子的依赖关系,观察到由能量的共振转移引起的荧光浓度猝灭现象,并取得了最大发光强度时的掺杂离子浓度和一些规律性结果.     

Kinetics of gas‐phase reactions of CH3OCH2CF3, CH3OCH3, CH3OCH2CH3, CH3CH2OCH2CH3, and CHF2CF2OCH2CF3 with NO3 radicals at 298 K

Rate constants for the gas‐phase reactions of CH₃OCH₂CF₃ (k₁), CH₃OCH₃ (k₂), CH₃OCH₂CH₃ (k₃), and CH₃CH₂OCH₂CH₃ (k₄) with NO₃ radicals were determined by means of a relative rate method at 298 K. NO₃ radicals were prepared by thermal decomposition of N₂O₅ in a 700–750 Torr N₂O₅/NO₂/NO₃/air gas mixture in a 1‐m³ temperature‐controlled chamber. The measured rate constants at 298 K were k₁ = (5.3 ± 0.9) × 10^?18, k₂ = (1.07 ± 0.10) × 10^?16, k₃ = (7.81 ± 0.36) × 10^?16, and k₄ = (2.80 ± 0.10) × 10^?15 cm³ molecule^?1 s^?1. Potential energy surfaces for the NO₃ radical reactions were computationally explored, and the rate constants of k₁–k₅ were calculated according to the transition state theory. The calculated values of rate constants k₁–k₄ were in reasonable agreement with the experimentally determined values. The calculated value of k₅ was compared with the estimate (k₅ < 5.3 × 10^?21 cm³ molecule^?1 s^?1) derived from the correlation between the rate constants for reactions with NO₃ radicals (k₁–k₄) and the corresponding rate constants for reactions with OH radicals. We estimated the tropospheric lifetimes of CH₃OCH₂CF₃ and CHF₂CF₂OCH₂CF₃ to be 240 and >2.4 × 10⁵ years, respectively, with respect to reaction with NO₃ radicals. The tropospheric lifetimes of these compounds are much shorter with respect to the OH reaction. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 490–497, 2009     

Die Systeme Tl3SbS3-Tl3AsS3 und TlSbS2-TlAsS2

The influence of structural relationships between the components of (pseudo)binary systems with no intermediate compounds on the type of phase diagram was investigated. Structurally and chemically closely related Tl₃SbS₃ and Tl₃AsS₃ form a complete solid solution series whereas crystallographically different TlSbS₂ and TlAsS₂ constitute an eutectic type system.