微乳液法制备MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料及其发光性能

采用微乳液法合成了MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）长余辉发光材料，并对其晶体结构和发光性能进行了比较与讨论。XRD分析表明，所合成的Ca2O4：Eu^2＋，Dy^3＋，SrAl2O4：Eu^2＋，Dy^3＋粉体为单斜晶系结构，BaAl2O4：Eu^2＋，Dy^3＋粉体为六方晶体结构。MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料的激发光谱都为一宽带连续谱，表明从紫外至可见光均可有效的激发该材料。发射光谱的发射波长峰值分别为440nm（M=Ca），520nm（M=Sr）和496nm（M=Ba）。对应的发光颜色分别为蓝色、黄绿色和蓝紫色。余辉衰减曲线分为快衰减、中间过渡衰减和随后极长的慢衰减过程，符合双曲线方程I=At^-n，余辉亮度与时间顺序为Sr〉Ca〉Ba。     

杂质的添加对SrAl2O：Eu^2＋,Dy^3＋余辉发光特性的改善

采用溶胶－凝胶法制备SrAl2O4:Eu^2 ,Dy^3 磷光体,并在合成过程中添加硼或硅以探讨光致发光及长余辉发光性质。发现硼、硅添加物不仅是助熔剂,且能改良SrAl2O4:Eu^2 ,Dy^3 之长余辉的持续时间及余辉发光强度。基于不同磷光体样品的实验结果比较,综合材料表面微结构观察、X射线衍射图谱、热释发光光谱与余辉衰减曲线的测量等实验结果分析,推断在SrAl2O4:Eu^2 ,Dy^3 中添加硼、硅可导致磷光体缺陷增加并稳定活化剂Eu^2 的价态。     

H3BO3对微波等离子体法合成SrAl2O4:Eu2+,Dy3+的影响

采用微波等离子体法合成SrAl2O4：Eu^2＋ Dy^3＋长余辉发光材料,探讨了H3BO3的加入对材料的光谱性能、余辉性能、相组成结构、微观形貌的影响。结果表明,适量的添加助溶剂H3BO3,有利于增强材料的发光强度,延长余辉时间,但过量的添加反而会导致发光性能下降。本试验确定硼酸的最佳添加量为10％。综合检测分析结果推断,硼酸加入后在高温下大部分形成液相,并通过液相传质促进晶体生长,提高基质的结晶程度,同时促进稀土离子Eu^2＋,Dy^3＋进入晶格并使其分布更均匀;而少部分则会进入晶格发生B取代Al,引起晶体场畸变,从而提高了材料的发光强度和长余辉特性。     

碱土金属离子（Mg^2＋，Ca^2＋，Ba^2＋）掺杂对长余辉荧光粉SrAl2O4：Eu^2＋，Dy^2＋发光性能的影响

采用高温固相法制备了碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）掺杂的SrAl2O4：Eu^2＋,Dy^3＋长余辉荧光粉。XRD谱分析表明,随着基质中掺入的碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）浓度增加,基质晶格常数也随之发生变化。Mg^2＋,Ca^2＋和Ba^2＋ 3种碱土离子在SrAl2O4中的固溶范围分别为40％,15％和30％。光谱分析则表明在固溶范围内随着掺杂Mg^2＋,Ca^2＋和Ba^2＋浓度的增大,样品的发射峰值会在480～530nm范围出现规律性移动。适当浓度的Mg^2＋,Ba^2＋掺杂会不同程度地提高样品的发光强度,而Ca^2＋的掺杂则会降低发光强度。但是碱土金属离子（Mg^2＋,Ca^2＋,Ba^2＋）的掺杂并不能延长SrAl2O4：Eu^2＋,Dy^3＋荧光粉的余辉时间。     

稀土氧化钕对铝酸盐长余辉发光材料性能的影响

制备了SrAl2O4:Eu2 ,Nd^3 和SrAl2O4:Eu^2 ,Dy^3 ,Nd^3 长余辉材料,研究了所合成的材料在不同波段紫外光激发条件下的发光光谱和激发光谱的差异和Eu^2 ,Dy^3 ,Nd^3 的摩尔掺杂浓度对材料的余辉性能的影响等。     

（CaO）20．68（MgO）1．32（SiO2）4S2：Eu^2＋，Dy^3＋红光材料的制备与发光特性

研究了峰值波长651nm的红色发光材料（CaO）20.68（MgO）1.32（SiO2）4S2：Eu^2＋，Dy^3＋的制备及发光特性。通过XRD分析表明硫气氛中合成的材料为具有硫成分的硅酸盐相。红光发射带为硫元素进入晶格后在发光中心周围形成了类似长余辉材料CaS：Eu^2＋，Cl^-的局域结构。这也使材料具有了硫化物长余辉材料的发射光谱特征和硅酸盐材料高化学稳定性和高亮度的优点。热释光测量揭示它可能是一种潜在的红色长余辉材料。     

锶铝比对稀土掺杂铝酸锶物相及发光性能的影响

用拟薄水铝石溶胶凝胶法成功制备了SrAl2O4：Eu^2 ，Dy^3 长余辉发光材料，样品无需球磨。XRD结果表明：当锶铝摩尔比Sr／Al＞0．3时，发光基质主相为SrAl2O4，杂质相为Sr4Al2O7，Sr／Al比值继续降低至0．25，发光相则以Sr4Al14O25为主，此时杂质相中含有Sr4Al2O7和Dy4Al2O9。Sr4Al2O7相对SrAl2O4：Eu^3 ，Dy^3 的发光性能影响很大，而对Sr4Al14O25：Eu^2 ，Dy^3 的发光性能影响不大。Dy4Al2O9对SrAl2O4和Sr4Al14O25发光主相的发光性能影响都不大。光谱检测结果表明SrAl2O4：Eu^2 ，Dy^3 发光光谱是中心位于520nm的带状谱。余辉检测结果表明发光主相为SrAl2O4和Sr4Al14O25时，光衰曲线符合I=ct^-n规律，n值分别为n=1．081和n=1．079。     

Sr1-xZnxY2S4∶Er^3＋,Eu^2＋荧光粉的合成与发光特性的研究

采用碳酸盐前躯体高温分解法合成了Sr1-xZnxY2S4∶Er^3＋,Sr1-xZnxY2S4∶Eu^2＋和Sr1-xZnxY2S4∶Er^3＋,Eu^2＋红色荧光粉。XRD图谱表明,Zn^2＋掺杂量x〈0.2 mol时,粉末样品为CaFe2O4型正交晶体。Zn^2＋离子在Sr1-xZnxY2S4∶Er^3＋,Eu^2＋中的固溶量（xmol）对荧光粉的发射强度影响很大。随着Zn^2＋离子掺杂浓度的增加,Sr1-xZnxY2S4∶Er^3＋,Eu^2＋（SZYSEE）紫外区激发峰（200-413 nm）发生红移,并与可见光激发带（413-600 nm）形成一个连续的宽带谱,与紫外和GaN基LED芯片辐射都有良好的匹配性。当Zn^2＋掺杂量为0.1 mol时,SZYSEE的发光强度达到最大,其发光强度比未掺Zn2＋的增强10.7倍。Sr0.9Zn0.1Y1.76S4∶0.24Er^3＋,0.006Eu^2＋是一种潜在的白光LED用红色荧光粉。     

一种计算稀土材料陷阱深度的新方法

表征陷阱材料的主要物理量是陷阱深度, 准确计算出陷阱深度对于研究陷阱材料具有重要的意义. 从能带模型出发, 利用速率方程分析了整个热释光过程, 提出了一种计算稀土材料陷阱深度的新方法, 替代以往利用单分子或双分子近似计算陷阱深度的方法. 以SrAl2O4：Eu^2＋, Dy^3＋及Sr4Al14O25：Eu^2＋, Dy^3＋材料为研究对象, 计算了陷阱深度. 研究表明, 这种计算方法能更准确、真实地描述其物理过程.     

溶胶-凝胶法制备Sr2MgSi2O7：Eu^2＋，Dy^3＋长余辉发光材料

采用溶胶-凝胶法合成了以Sr2MgSi2O7为基质，掺杂Eu^2 ，Dy^3 的长余辉发光材料，并表征其结构，激发-发射光谱和余辉衰减曲线。XRD分析表明，所合成的样品为Sr2MgSi2O7晶体结构。发光粉体的激发波长范围较宽，表明从紫外至可见光均可激发该发光材料。发射光谱主峰位于466nm。样品在自然光照射后持续发出明亮的蓝光，余辉时间持续8h以上。     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Die Photoionenspektren von SCl2, S2Cl2 und S2Br2

Photoionization Mass Spectra of SCl₂, S₂Cl₂, and S₂Br₂ Photoionization mass spectra of SCl₂, S₂Cl₂, and S₂Br₂ have been measured. Heats of formation, bond energies, and ionization potentials of fragments have been calculated from appearance potentials.