蛋壳膜固相萃取富集-高效液相色谱法测定三氟羧草醚残留

建立了利用蛋壳膜作为固相萃取吸附剂,高效液相色谱法测定除草剂三氟羧草醚残留的方法。实验考察和优化了样品p H、洗脱剂种类和体积、样品体积等影响固相萃取效率的操作条件。在优化条件下用于玉米粉中三氟羧草醚残留的测定,三氟羧草醚的检出限(S/N=3)为5.4μg/kg,加标回收率在92.0%~103.0%间,相对标准偏差低于4.3%。     

固相萃取/气相色谱法测定新会陈皮及其制品中8种有机磷农药

建立了固相萃取/气相色谱同时测定新会陈皮及其制品中8种有机磷农药的分析方法,并对影响提取、净化、检测效率的因素进行优化。样品用乙酸乙酯提取,自制改性多壁碳纳米管和N-丙基乙二胺2种填料分层填装的双层固相萃取小柱净化,Shimadzu Rtx-1701毛细管色谱柱分离,火焰光度检测器检测,外标法定量。在优化实验条件下,8种有机磷农药在0.020~1.0μg/m L范围内具有良好的线性关系,相关系数为0.997 0~0.999 2,检出限(S/N=3)为3.6~8.8μg/kg。3个加标水平下的平均回收率为72.5%~106%,相对标准偏差为2.8%~8.7%。该法准确、快速、灵敏﹑操作简单,可满足新会陈皮及其制品中多种有机磷农药残留同时测定的要求。且自制柱的成本低,能够大幅度减低使用成本,值得推广应用。     

分散固相萃取-高效液相色谱法测定水产品中甲基睾丸酮的残留量

建立了水产品中甲基睾丸酮残留的分散固相萃取-高效液相色谱检测方法。样品加入无水硫酸镁后乙酸乙酯均质提取,提取液经中性氧化铝粉分散固相萃取、净化后上机检测。甲基睾丸酮的检出限为8μg/kg,在质量浓度为10~10 000ng/mL的范围内线性良好,相关系数为0.9999。对罗非鱼、草鱼、对虾及甲鱼进行3个水平(30,50,100μg/kg)的加标回收实验,回收率为84.6%~106%,相对标准偏差为1.77%~4.27%。方法适用于水产品中甲基睾丸酮残留的快速分析检测。     

亚临界1,1,1,2-四氟乙烷萃取-气相色谱-质谱法测定鱼肉中6种性激素残留

利用亚临界1,1,1,2-四氟乙烷(R134a)萃取技术,建立了鱼肉中6种性激素残留的气相色谱-质谱(GC-MS)分析方法。样品中的药物经过亚临界R134a萃取后,先进行冷冻过滤去脂,然后通过C18和NH2固相萃取小柱净化,最后经七氟丁酸酐衍生后,采用GC-MS进行定性与定量分析。本实验确定了亚临界R134a萃取6种性激素的最佳条件为:萃取压力4 MPa,萃取温度30℃,夹带剂用量6 mL。在此条件下,6种性激素在5~1000μg/L浓度范围内线性关系良好,相关系数均大于0.99;检出限为0.2~1μg/kg(S/N=3)。在3种浓度添加水平(1,5和10μg/kg)下,6种激素的平均回收率为70.5%~103.6%,相对标准偏差(RSD)为2.1%~12.5%。采用本方法进行实际样品检测时,在一份罗非鱼样品中检出己烯雌酚残留,残留量为14.6μg/kg。     

多壁碳纳米管固相萃取/超高效液相色谱-串联质谱测定茶油中12种氨基甲酸酯类农药

建立了多壁碳纳米管(MWCNTs)为吸附剂的固相萃取净化/超高效液相色谱-串联质谱(UPLC-MS/MS)检测茶油中12种氨基甲酸酯类农药残留的快速分析方法。样品经乙腈超声提取,MWCNTs固相萃取小柱净化,以乙腈进行洗脱,旋蒸浓缩后以0.1%乙酸-乙腈(5∶5,体积比)定容,采用UPLC-MS/MS多反应监测模式(MRM)测定,外标法定量。考察了提取方式、吸附材料类型、洗脱溶剂用量等因素对目标物萃取效率的影响。在优化实验条件下,MWCNTs固相萃取小柱对茶油样品的净化效果理想。12种氨基甲酸酯类农药在0.005～0.1μg/mL范围内线性关系良好,相关系数(r)均不小于0.998 88;在0.01、0.025、0.05 mg/kg加标水平下,12种目标物的平均回收率为78.3%～116%,相对标准偏差为2.6%～12%,方法的定量下限为0.2～3.0μg/kg。     

改进的QuEChERS方法结合气相色谱串联质谱检测韭菜中的多种农药残留

采用改进的Qu ECh ERS方法结合气相色谱串联质谱(GC-MS/MS)检测韭菜中的多种农药残留。样品经含1%乙酸的乙腈匀质提取,采用分散固相萃取剂净化,在GC-MS/MS多反应监测(MRM)模式下进行测定。对Qu ECh ERS方法的提取和净化条件进行了优化。在优化条件下,44种农药残留在10~500μg/kg范围内呈良好线性关系,相关系数的平方(R~2)在0.9971~0.9999之间。在10μg/kg和100μg/kg添加水平下,44种农药的平均回收率为91.5%~119.6%,日内日间相对标准偏差小于14.1%。将所建立的方法用于实际样品的分析中,取得了较好的效果。     

磁性修饰多壁碳纳米管固相萃取快速测定牛奶中20种激素残留

以磁性修饰多壁碳纳米管作为磁性固相萃取剂结合超高效液相色谱-串联质谱(UPLC-MS/MS)技术快速检测牛奶中7种雌性激素和13种孕激素残留。样品经磁性修饰M WCNTs固相萃取净化,采用Waters AtlantisBEH色谱柱分离,以乙腈和0.02%NH3·H2O为流动相进行梯度洗脱,采用电喷雾正、负双离子扫描的多反应监测(MRM)模式,内标法定量。对影响磁性固相萃取效率的因素:溶液的p H、吸附剂和洗脱剂、萃取时间等进行考察。20种激素在线性质量浓度范围1~120μg/L内的相关系数均大于0.99,方法的检出限在(S/N≥3)0.01~0.06μg/kg之间。在0.1,1,5μg/kg 3个加标量下的加标回收率在81.0%~107.0%之间,相对标准偏差在1.0%~8.0%之间。结果表名磁性修饰MWCNTs对牛奶样品具有良好的净化效果,适用于牛奶中激素残留的快速检测。     

盐析辅助均相液液萃取/分散固相萃取-超高效液相色谱串联质谱法测定蜂蜜中新烟碱类农药残留

以盐析辅助均相液液萃取结合分散固相萃取作为前处理方法,建立了超高效液相色谱串联质谱快速检测蜂蜜中吡虫啉、噻虫嗪、噻虫胺、噻虫啉、啶虫脒及氯噻啉6种新烟碱类农药残留的分析方法。样品用乙腈提取,氯化钠盐析分层,提取液经分散固相萃取法净化,采用超高效液相色谱串联质谱检测器进行分析。考察了萃取剂种类、体积及氯化钠质量对萃取效率的影响,评估了在优化实验条件下的基质效应和方法性能。结果表明:除吡虫啉外,其余5种新烟碱类农药的基质效应均大于10%。6种新烟碱类农药在0.2~100μg/L范围内线性关系良好,相关系数(r2)为0.998 1~0.999 7。加标浓度为1.0~50.0μg/kg时,6种新烟碱类农药的加标回收率为77.0%~106%,相对标准偏差为2.4%~19.8%。方法的检出限为0.2~0.4μg/kg,定量下限为1.0μg/kg。该方法前处理简单,分析时间短,准确度和灵敏度高,重现性好,适用于蜂蜜中6种新烟碱类农药微量残留的快速测定。     

自制双层固相萃取柱在新会陈皮及其制品中11种有机磷农药测定中的应用

以自制改性多壁碳纳米管（MWNTs）和N-丙基乙二胺（PSA）填料分层填装的双层固相萃取柱为净化柱,建立了测定陈皮及其制品中11种有机磷农药残留的分析方法。样品经乙酸乙酯提取、离心后,固相萃取柱净化,净化液经Agilent RTS-1701毛细管柱分离,火焰光度检测器检测,外标法定量。考察了填料类型、填料用量、洗脱方式等因素对提取效率的影响。在优化条件下,11种有机磷农药检测的线性范围为0.020~1.0 mg/L,相关系数为0.9990~0.9998,检出限为3.5~9.6 μ g/kg。样品在10、25、100 μg/kg 3种水平下的加标回收率为50.8%~109%,相对标准偏差为2.7%~8.5%。该法准确度和灵敏度高、操作简单、快速,检出限能满足对有机磷农药残留的限量要求。自制固相萃取柱可降低成本,值得推广应用。     

高效液相色谱法对环境样品中甲基托布津与甲霜灵残留的测定

建立了自动固相萃取/高效液相色谱法测定地表水和土壤中甲基托布津和甲霜灵残留的方法。地表水采用C18固相萃取小柱进行富集、净化及浓缩;土壤采用丙酮-二氯甲烷(体积比3∶7)溶液振荡萃取,弗罗里硅土小柱净化和浓缩;以乙腈和水为流动相,于230 nm波长处对样品进行高效液相色谱检测。甲基托布津和甲霜灵在水中的检出限分别为0.36、3.49μg/L,在土壤中的检出限分别为0.03、0.18 mg/kg;在优化实验条件下,甲基托布津和甲霜灵在水样和土壤样品中的添加回收率为77%~105%,精密度为1.2%~8.5%。方法可用于环境样品中甲霜灵和甲基托布津残留量的测定。     

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.     

Multiwalled carbon nanotubes as adsorbents of solid-phase extraction for determination of polycyclic aromatic hydrocarbons in environmental waters coupled with high-performance liquid chromatography

Multiwalled carbon nanotubes (MWCNTs) were used as a novel kind of solid-phase extraction adsorbents in this work as well as an analytical method based on MWCNTs solid-phase extraction (SPE) combined with high-performance liquid chromatography (HPLC) was established for the determination of polycyclic aromatic hydrocarbons (PAHs), some of which belong to typical persistent organic pollutants (POPs) owing to their carcinogenicity and endocrine disrupting activity. Several conditions that probably affected the extraction efficiency including the eluent volume, sample flow rate, sample pH and the sample volume were optimized in detail. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method, and the method was applied to the determination of PAHs in environmental water samples such as river water sample, tap water sample and wastewater sample from the constructed wetland effluent. The experimental results indicated that there were excellent linear relationship between peak area and the concentration of PAHs over the range of 0.04-100 microg L(-1), and the precisions (RSD) were 1.7-4.8% under the optimal conditions. The detection limits of proposed method for the studied PAHs were 0.005-0.058 microg L(-1) (S/N=3). The recoveries of PAHs spiked in environmental water samples ranged from 78.7 to 118.1%. It was concluded that MWCNTs packed cartridge coupled with HPLC was an excellent alternative for the routine analysis of PAHs at trace level.     

钴镍笼状双金属氢氧化物/多壁碳纳米管复合材料对环境水样中农药的高效富集北大核心CSCD

建立高效、灵敏的农药分离、富集和检测方法具有重要意义。该实验采用一步法合成了钴基沸石咪唑骨架/多壁碳纳米管(ZIF-67/MWCNTs)复合物,并以该复合物为模板通过溶剂热法合成了钴镍笼状双金属氢氧化物/多壁碳纳米管(CoNi-LDH/MWCNTs)复合材料,将CoNi-LDH/MWCNTs用作固相微萃取(SPME)的纤维涂层富集环境水样中的6种农药,结合高效液相色谱(HPLC)测定了环境水样中的6种农药。通过扫描电镜、能谱分析、红外光谱、粉末X射线衍射和N吸附/脱附对所制备的各种材料进行了表征。利用正交设计试验优化SPME的萃取条件,包括萃取温度、萃取时间、搅拌速率、解吸时间和盐浓度。在最优化的条件下,该方法具有较宽的线性范围(百菌清为0.015~200μg/L,戊唑醇为0.140~200μg/L,毒死蜱为0.250~200μg/L,仲丁灵为0.077~200μg/L,溴氰菊酯为1.445~200μg/L,哒螨灵为0.964~200μg/L)、较低的检出限(0.004~0.434μg/L)和良好的重复性。单个纤维和不同批次纤维间的相对标准偏差(RSD)分别为0.5%~5.7%和0.5%~4.8%。在10.0μg/L和50.0μg/L 2个水平下的加标回收率为83.9%~108.2%,RSD<5.3%。此外,与其他涂层纤维相比,CoNi-LDH/MWCNTs涂层对农药具有更高效的富集能力,这归因于它的高比表面积以及CoNi-LDH/MWCNTs涂层与目标分析物之间存在的π-π堆积作用、疏水作用、阳离子-π相互作用和氢键作用。该方法可以实现环境水样中农药残留的高选择性、高灵敏度及高准确性的分析测定。     

磁性多壁碳纳米管固相萃取-气相色谱-质谱法检测水样中的13种邻苯二甲酸酯类化合物

建立了磁性多壁碳纳米管(MWCNTs)固相萃取结合气相色谱-质谱检测水样中13种邻苯二甲酸酯类化合物(PAEs)的方法。优化了萃取时间、水样pH值、解吸溶剂的种类和用量、解吸时间等影响萃取效率的主要条件。最终确定萃取时间为10 min,水样pH 5～7,解吸溶剂为2 mL丙酮,解吸时间为5 min。在优化的条件下,各组分的萃取回收率为89.7%～100.5%。方法具有较高的灵敏度,检出限(信噪比(S/N)为3)为0.08～0.47 μg/L。3种实际样品的加标回收率为84.5%～107.5%,相对标准偏差为1.9%～12.8%。该方法操作简便、省时,准确、灵敏、环保,可用于水样中PAEs的检测,并成功地应用于自来水、瓶装饮用水和湖水样品的分析,13种PAEs均未检出。     

Determination of pesticide residues in complex matrices using multi-walled carbon nanotubes as reversed-dispersive solid-phase extraction sorbent

A modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method with multi-walled carbon nanotubes (MWCNTs) as a reversed-dispersive solid-phase extraction (r-DSPE) material combined with gas chromatography-mass spectrometry was developed for the determination of 14 pesticides in complex matrices. Four vegetables (leek, onion, ginger and garlic) were selected as the complex matrices for validating this new method. This technique involved the acetonitrile-based sample preparation and MWCNTs were used as the r-DSPE material in the cleanup step. Two important parameters influencing the MWCNTs efficiency, the external diameters and the amount of MWCNTs used, were investigated. Under the optimized conditions, recoveries of 78-110% were obtained for the target analytes in the complex matrices at two concentration levels of 0.02 and 0.2 mg/kg. In addition, the RSD values ranged from 1 to 13%. LOQs and LODs for 14 pesticides ranged from 2 to 20 μg/kg and from 1 to 6 μg/kg, respectively.     

Multiwalled Carbon Nanotube Coated on Stainless Steel Wire for Solid-Phase Microextraction of Organochlorine Pesticides in Water

A novel solid-phase microextraction (SPME) fiber was prepared by coating multiwalled carbon nanotube (MWCNTs) on a stainless steel wire, and its characteristics were studied. To evaluate the MWCNTs coating, the fiber was used for the extraction of some organochlorine pesticides (OCPs) from water samples by Headspace SPME (HS-SPME) mode. Potential factors affecting the extraction efficiency such as extraction time, extraction temperature, agitation, ionic strength, desorption temperature, and time were also optimized. Several experiments were carried out by water spiked with target compounds to evaluate the analytical characteristics of the proposed method under optimized conditions. The linearity was from 0.1 to 10 ug/L with the linear correlation coefficients (r) ranging from 0.9956 to 0.9995. The limits of detection (LOD, S/N = 3) for these pesticides were between 0.43 and 2.13 ng/L and the precision (RSD, n = 5) was 2.53–12.25%. When this method was applied for the spiked real river sample, the relative recoveries ranged from 72.4% to 134.7% for the tested OCPs.     

Determination of linear alkylbenzene sulfonates by ion-pair solid-phase extraction and high-performance liquid chromatography

In this paper, the potential use of multiwalled carbon nanotubes (MWCNTs) as solid phase extraction (SPE) adsorbent was evaluated for preconcentration of linear alkylbenzene sulfonates (LAS) using ion-pair (IP)-SPE with tetrabutylammonium hydroxide (TBAH). The LAS homologues present in the aqueous sample were ion-paired with TBAH and the solution was passed through the MWCNT cartridges. The analytes retained in the cartridge were eluted with methanol and the concentrated methanol extract was analysed by HPLC-UV. In order to obtain the satisfactory recovery of LAS homologues, various parameters including the type and amount of the ion-pair reagents, the desorption and enrichment conditions such as the effect of eluent and its volume, pH, the flow rate, the ultrasonic time of sample, and the volume of sample solution were systematically optimized. Under the optimal conditions, LAS homologues could be easily extracted by the proposed SPE cartridge. The favorable limits of detection (LOD) for LAS homologues were in the range from 0.02 to 0.03 μg L⁻¹, and the relative standard deviations (RSDs) were 1.55-2.54% for 10 μg L⁻¹ LAS (n = 6). The proposed method has been successfully applied for the analysis of LAS homologues in aqueous environmental samples. A comparison study with ion-pair solid extraction on MWCNTs, C8 and C18 as adsorbents for LAS demonstrated that ion pair-based solid extraction on MWCNTs adsorbent was advantageous over C8 and C18, the widely used traditional adsorbents.     

Fast SPE and HPLC–DAD determination of brucine in human urine using multi-walled carbon nanotubes modified with magnetic nanoparticles

A nanomaterial comprising Fe₃O₄-modified hydroxylated multi-walled carbon nanotubes (Fe₃O₄–MWCNTs–OH) was prepared by a co-precipitation method. Combined with HPLC-photodiode array detector (DAD), Fe₃O₄–MWCNTs–OH was used to determine brucine in human urine. Some important parameters that could influence extraction efficiency of brucine were optimized, including the extraction time, amounts of Fe₃O₄–MWCNTs–OH, pH of sample solutions, desorption solvent and desorption time. Under the optimal conditions, the recoveries of brucine from spiked urine samples were between 93.1 and 104.1%, and the relative standard deviations (RSDs) ranged from 3.1 to 5.7%. The correlation coefficient was 0.9997. The limits of detection and quantification were 6 and 21 ng/mL at a signal-to-noise ratio of 3 and 10, respectively. The results indicated that Fe₃O₄–MWCNTs–OH combined with HPLC–DAD is a promising solid-phase extraction material for the sample pretreatment in the determination of brucine.     

Dispersive solid phase extraction of metronidazole and clarithromycin from human plasma using a β-cyclodextrin grafted polyethylene polymer composite

In this work, for the first time, a polymeric composite based on β-cyclodextrin grafted with polyethylene has been prepared through ball milling and used as an efficient sorbent for dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The prepared sorbent was characterized using Fourier transform infrared spectrophotometry, X-ray diffraction, and scanning electron microscopy. In the extraction process, after precipitating the proteins, the sorbent was added into the sample solution, and the mixture was vortexed to facilitate and speed up the sorption of the analytes onto the sorbent surface. After centrifuging, the sorbent particles were contacted with methanol to elute the analytes under the vortexing process. After this step, an aliquot of the eluate was taken and injected into high-performance liquid chromatography–diode array detector for quantitative analysis. Under the optimum extraction conditions, the extraction recoveries for metronidazole and clarithromycin were 76 and 83%, respectively. The limits of detection were 2.6 and 2.2 ng/ml for metronidazole and clarithromycin, respectively. The repeatability of the offered approach, expressed as relative standard deviation, was equal to or less than 4.7%. Finally, the method was successfully applied to plasma samples of the patients treated with metronidazole and clarithromycin.     

基于多壁碳纳米管改进QuEChERS法结合气相色谱-串联质谱检测茶叶中10种拟除虫菊酯类农药残留

利用多壁碳纳米管(MWCNTs)QuEChERS法提取茶叶中拟除虫菊酯类残留农药,采用气相色谱-串联质谱(GC-MS/MS)分析测定,建立了一种灵敏度高、可靠性强的茶叶中农药残留检测方法。比较了单壁碳纳米管(SWCNTs)、MWCNTS、氨基化多壁碳纳米管和石墨烯4种碳纳米材料和其不同用量下的净化效果;采用正交试验设计对前处理最佳实验条件进行筛选,并对实验影响因素进行方差分析。结果表明:提取溶剂、碳纳米材料种类对10种拟除虫菊酯类农药回收率的影响具有极显著统计学差异(p<0.001),提取时间对回收率的影响有统计学差异(p<0.05),碳纳米材料用量对回收率影响不显著(p>0.05);最佳样品前处理条件为以乙腈为提取溶剂,超声提取35 min,净化剂为60 mg MWCNTs、200 mg PSA和200 mg C18。方法学考察表明,10种拟除虫菊酯类农药在0.01~2 mg/L范围内线性良好;检出限(LOD)为0.001~0.01 mg/kg,定量限(LOQ)为0.005~0.04 mg/kg;绿茶样品空白基质加标试验中,10种农药的回收率为91.4%~109.7%,相对标准偏差为0.12%~9.80%(n=6)。对花茶、绿茶、红茶3种茶叶基质进行基质效应(ME)评价,结果发现净化剂中加入MWCNTs在绿茶和红茶基质中能有效降低ME。利用该方法检测了市售120份茶叶中拟除虫菊酯类农药的残留,多个样品中检出目标物,但均未超标。该方法检测灵敏度高,可靠性好,具有良好的回收率和稳定性,能满足茶叶中农药残留快速定量分析的要求。