Ce0.5Zr0.5O2修饰的Ni/SiC、Fe/SiC和Co/SiC催化燃烧甲烷性能

以铈锆固溶体(Ce0.5Zr0.5O2)修饰的高比表面积SiC为载体,采用两步浸渍法制备了Ni、Fe和Co基催化剂,研究了其在煤层气催化燃烧脱氧中的催化活性和稳定性.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、电感耦合等离子体质谱(ICP-MS)、高分辨透射电子显微镜(HRTEM)、比表面积(BET)、热重分析(TGA)和H2程序升温还原(H2-TPR)对催化剂进行了表征.分析结果表明,Ni、Fe和Co部分进入Ce0.5Zr0.5O2固溶体晶格内部,导致催化剂体相形成更多的缺陷;同时Ce0.5Zr0.5O2固溶体有助于加速金属氧化物和金属之间氧化还原过程的进行,促进了氧吸附、传输和对甲烷的活化.另外,SiC和Ce0.5Zr0.5O2固熔体良好的抗积碳性能,有效避免了催化剂在富甲烷反应气氛中因积碳而失活,从而使三种催化剂均具有优良的催化燃烧脱氧活性和稳定性.其中,Co/Ce0.5Zr0.5O2/SiC活性最高,可在320℃活化催化甲烷,并在410℃实现完全脱氧.     

Ce0.5Zr0.5O2修饰的Ni/SiC、Fe/SiC和Co/SiC催化燃烧甲烷性能

以铈锆固溶体(Ce0.5Zr0.5O2)修饰的高比表面积SiC为载体,采用两步浸渍法制备了Ni、Fe和Co基催化剂,研究了其在煤层气催化燃烧脱氧中的催化活性和稳定性.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、电感耦合等离子体质谱(ICP-MS)、高分辨透射电子显微镜(HRTEM)、比表面积(BET)、热重分析(TGA)和H2程序升温还原(H2-TPR)对催化剂进行了表征.分析结果表明,Ni、Fe和Co部分进入Ce0.5Zr05O2固溶体晶格内部,导致催化剂体相形成更多的缺陷;同时Ce0.5Zr0.5O2固溶体有助于加速金属氧化物和金属之间氧化还原过程的进行,促进了氧吸附、传输和对甲烷的活化.另外,SiC和Ce0.5Zr0.5O2固熔体良好的抗积碳性能,有效避免了催化剂在富甲烷反应气氛中因积碳而失活,从而使三种催化剂均具有优良的催化燃烧脱氧活性和稳定性.其中,Co/Ce0.5zr0.5O2/SiC活性最高,可在320 ℃活化催化甲烷,并在410 ℃实现完全脱氧.     

Ce0.5+xZr0.4-xLa0.1O2-Al2O3催化剂催化燃烧柴油车碳烟

采用共沉淀法制备了系列Ce_0.5+xZr_0.4-xLa_0.1O₂-Al₂O₃催化剂, 其中0≤x≤0.4且Ce_0.5+xZr_0.4-xLa_0.1O₂与Al₂O₃的质量比为1:1. 考察了该系列催化剂对柴油车排放碳烟的催化燃烧性能, 并用低温N2吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、氢气程序升温还原(H₂-TPR)和氧气程序升温脱附(O₂-TPD)等手段对催化剂进行了表征. 研究结果表明该系列催化剂均形成了具有立方萤石结构的固溶体. 当x=0.2时, Ce³⁺离子在催化剂表面有一定的富集, 此时催化剂具有最大的β氧脱附峰和最好的表面还原性能, 同时具有良好的催化碳烟氧化活性, 碳烟在该催化剂的起燃温度为360 °C, 具有较好的应用前景.     

高比表面CexZr1-xO2复合氧化物的制备及表征

分别采用共沉淀法和阴离子表面活性剂模板法制备了Ce_xZr_1-xO₂复合氧化物。采用XRD、AFM、FTIR以及N₂吸附-脱附等方法对样品进行了表征。结果表明，共沉淀法合成的样品在500 ℃煅烧2 h后，生成了立方相Ce_0.75Zr_0.25O₂和四方相Ce_0.5Zr_0.5O₂固溶体，比表面积为62.1 m²·g^-1，孔体积为0.097 cm³·g^-1；以阴离子表面活性剂十二烷基苯磺酸钠(SDBS)为模板剂，乙二胺为助模板剂合成的样品在500 ℃煅烧2 h后，生成了纯四方相Ce_0.5Zr_0.5O₂固溶体，比表面积为180 m²·g^-1，孔体积为0.182 cm³·g^-1。结果表明，以阴离子表面活性剂SDBS为模板剂，可以合成高比表面积且具有介孔结构的Ce_0.5Zr_0.5O₂复合氧化物；加入乙二胺作为助模板剂可明显的提高比表面积和孔体积。     

ZnO添加量对Pd/Zr0.5Al0.5O1.75催化剂净化稀燃天然气汽车尾气性能的影响

以掺杂不同含量ZnO的Zr_0.5Al_0.5O_1.75为载体,制备了系列1.5%Pd催化剂.在模拟稀燃天然气汽车尾气条件下,测试了催化剂的活性和抗水性,并用N₂吸附-脱附、X射线衍射、H₂程序升温还原和X射线光电子能谱等手段对催化剂进行了系统表征.研究结果表明,ZnO的添加及添加量对催化剂的活性和抗H₂O性有明显影响,其中以ZnO添加量为15%时制备的复合氧化物为载体的催化剂活性最佳.当模拟尾气中不含H₂O时,该催化剂对甲烷的起燃温度（T₅₀）和完全转化温度（T₉₀）分别为278和314℃;在含H₂O时,该催化剂的T₅₀和T₉₀分别为342和371℃.     

焙烧温度对“软-硬”模板法制备的Pd/Ce0.65Zr0.35O2三效催化性能的影响

采用"软-硬"模板法制备了具有高热稳定性的Ce_0.65Zr_0.35O₂（CeZr）。考察了制备过程中焙烧温度对Ce_0.65Zr_0.35O₂及其负载的单Pd三效催化剂（TWC）性能的影响。对样品进行了X射线衍射、比表面、拉曼光谱、X射线光电子能谱、储氧性能和H₂程序升温还原性能测试。结果表明：焙烧温度显著影响催化剂的结构和性能。随着焙烧温度的增加，Ce_0.65Zr_0.35O₂的比表面下降，但在1 000℃焙烧的样品比表面为61 m²·g^-1，显著高于同温度下直接在空气中焙烧的样品。由于高温导致了物相重组，Ce_0.65Zr_0.35O₂的储氧量和还原性能随着焙烧温度的增加而提升。由于高温烧结导致Pd分散性的下降，其负载的催化剂的还原性能随着焙烧温度的增加而下降，从而最终导致催化剂活性的降低。但在"软-硬"模板法中1 000℃焙烧的样品负载的催化剂依然显示出很好的三效催化性能，该催化剂上C₃H₈、CO和NO的起燃温度分别为274、175和133℃，显著低于同温度下空气中直接焙烧的样品负载的催化剂。催化剂的氧化还原性能和Pd的分散性是影响催化活性的主要因素。     

Pt/Ce0.6Zr0.4O2催化剂催化氧化碳烟过程中活性氧对NO-NO2循环及表面含氧物种的分解作用简

通过在Ce_0.6Zr_0.4O₂载体上浸渍Pt（NO₃）₂制得Pt/Ce_0.6Zr_0.4O₂催化剂,该催化剂在松散接触条件下,于NO+O₂或O₂气氛中均表现出比Pt/Al₂O₃更好的碳烟氧化性能. 进一步研究表明,Pt/Ce_0.6Zr_0.4O₂催化剂中的Pt 与Ce_0.6Zr_0.4O₂存在相互作用,使得催化剂在一定温度范围内对活性氧的利用率大为提高,从而促进了气氛中NO↔NO₂的循环,乃至碳烟与NO₂的反应和碳烟表面含氧中间物种的生成;更重要的是,这部分活性氧本身可加速含氧中间物种的分解. 因此,在NO + O₂的气氛中,Pt/Ce_0.6Zr_0.4O₂催化剂的碳烟起燃温度比Pt/Al₂O₃降低了34 ℃.     

铈锆固溶体的微波辅助法制备及表征

采用共沉淀法并结合不同的老化处理方式(室温陈化、常规加热回流和微波辅助加热回流)制备了Ce_0.6Zr_0.4O₂固溶体。利用SEM、N₂吸附、XRD、Raman光谱和H₂-TPR等技术对样品的形貌、比表面积、孔结构、晶相结构、高温热稳定性和还原性进行了表征,并考察了其对CO氧化反应的催化性能。结果表明,微波辅助加热回流老化处理所制备的固溶体属于立方萤石结构,颗粒的大小均匀,表面结构疏松,具有最大的比表面积和孔容、最高的热稳定性及最好的低温还原性。CO氧化实验表明微波辅助加热回流老化处理所制备的Ce_0.6Zr_0.4O₂固溶体具有最好的催化氧化活性。     

Ni/SiO2-Al2O3催化乙酰丙酸加氢制γ-戊内酯

采用溶胶-凝胶法制备了一系列不同Al₂O₃含量的SiO₂-Al₂O₃复合氧化物,以该系列复合氧化物为载体,采用等体积浸渍法制备了Ni负载量15%（重量百分比）的催化剂,用于催化乙酰丙酸加氢制γ-戊内酯.采用N₂物理吸附、X射线衍射（XRD）、H₂程序升温还原（H₂-TPR）、H₂程序升温脱附（H₂-TPD）、NH₃程序升温脱附（NH₃-TPD）和吡啶吸附红外（Py-IR）等手段对催化剂进行了表征.结果表明,不同载体催化剂的活性组分分散度及表面酸性质存在明显差异,显著影响了催化剂吸附、活化H₂与C=O键的能力,进而影响了催化剂的乙酰丙酸加氢活性.其中,Ni/SiO₂-Al₂O₃催化剂上的L酸中心能够促进C=O键的吸附、活化,与金属Ni上的H₂吸附活性位协同作用,大大提高了乙酰丙酸加氢活性.因此,具有最多L酸中心和丰富H₂吸附活性位的Ni/SiO₂-8Al₂O₃催化剂表现出最高的乙酰丙酸加氢活性,在180℃、4 MPa氢气压力下,乙酰丙酸转化率达到90.5%,目标产物γ-戊内酯选择性为100%.     

Pt/ZrO2-Al2O3催化剂催化氧化C3H6和CO性能

采用共沉淀法合成了ZrO₂与Al₂O₃的不同质量比的ZrO₂-Al₂O₃复合氧化物,并以此为载体通过等体积浸渍法制备了1.5% Pt/ZrO₂-Al₂O₃（w/w）催化剂。以C₃H₆和CO为反应物的催化性能评价显示,在系列催化剂中以Pt/Zr（0.4）-Al催化剂催化氧化活性最为优异,其C₃H₆和CO的起燃温度（T₅₀）小于125℃,完全转化温度（T₉₀）小于150℃。采用XRD、低温N₂吸附、H₂-TPR、CO脉冲吸附等分析表征技术探索了催化剂物相结构、比表面积、颗粒尺寸等对催化活性的影响规律。结果发现,ZrO₂-Al₂O₃复合氧化物具有Al₂O₃材料的介孔织构和大比表面积特性,且产生了Al_xZr_1-xO_y固溶体新物相。适当的ZrO₂与Al₂O₃的质量比,是改善Pt与ZrO₂-Al₂O₃的相互作用强度,促进贵金属Pt的分散,提升Pt/ZrO₂-Al₂O₃催化剂的低温氧化活性的关键。     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1 Al0.7Oδcatalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1 Al0.7Oδautothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδwas found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Structure and Catalytic Properties of Ceria-based Nickel Catalysts for CO<Subscript>2</Subscript> Reforming of Methane

Carbon dioxide reforming (CDR) of methane to synthesis gas over supported nickel catalysts has been reviewed. The present review mainly focuses on the advantage of ceria based nickel catalysts for the CDR of methane. Nickel catalysts supported on ceria–zirconia showed the highest activity for CDR than nickel supported on other oxides such as zirconia, ceria and alumina. The addition of zirconia to ceria enhances the catalytic activity as well as the catalyst stability. The catalytic performance also depends on the crystal structure of Ni–Ce–ZrO₂. For example, nickel catalysts co-precipitated with Ce_0.8Zr_0.2O₂ having cubic phase gave synthesis gas with CH₄ conversion more than 97% at 800 °C and the activity was maintained for 100 h during the reaction. On the contrary, Ni–Ce–ZrO₂ having tetragonal phase (Ce_0.8Zr_0.2O₂) or mixed oxide phase (Ce_0.5Zr_0.5O₂) deactivated during the reaction due to carbon formation. The enhanced catalytic performance of co-precipitated catalyst is attributed to a combination effect of nano-crystalline nature of cubic Ce_0.8Zr_0.2O₂ support and the finely dispersed nano size NiO _x crystallites, resulting in the intimate contact between Ni and Ce_0.8Zr_0.2O₂ particles. The Ni/Ce–ZrO₂/θ–Al₂O₃ also exhibited high catalytic activity during CDR with a synthesis gas conversion more than 97% at 800 °C without significant deactivation for more than 40 h. The high stability of the catalyst is mainly ascribed to the beneficial pre-coating of Ce–ZrO₂ resulting in the existence of stable NiO _x species, a strong interaction between Ni and the support, and an abundance of mobile oxygen species in itself. TPR results further confirmed that NiO _x formation was more favorable than NiO or NiAl₂O₄ formation and further results suggested the existence of strong metal-support interaction (SMSI) between Ni and the support. Some of the important factors to optimize the CDR of methane such as reaction temperature, space velocity, feed CO₂/CH₄ ratio and H₂O and/or O₂ addition were also examined.     

Zr0.5Ti0.5O2的添加对超临界裂解RP-3催化剂性能的影响

采用共沉淀法制备了Zr_0.5Ti_0.5O₂载体材料,将其掺杂在CeO₂-Al₂O₃ (CA)基催化剂中, 并对其催化活性进行了超临界裂解测试, 采用全自动吸附仪、X射线衍射(XRD)、透射电镜(TEM)、程序升温脱附(TPD)等方法对催化剂进行了表征. 实验结果表明, 催化剂能够明显降低裂解反应的温度, 600 ℃ CA基催化剂产气率是热裂解的2.8倍, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂是热裂解的4.0倍, 650 ℃时, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂热沉提高了0.55 MJ·kg^-1. BET结果表明, 掺杂Zr_0.5Ti_0.5O₂载体后催化剂出现双孔结构, 部分小孔的出现使得乙烯的选择性提高; NH₃-TPD结果表明, 掺杂Zr_0.5Ti_0.5O₂载体材料后, 催化剂强酸位的酸量增加了4.0倍,催化剂表现出更强的表面酸性和更集中的强酸酸中心密度, 有利于裂解多产烯烃.     

Promotional effect of cobalt addition on catalytic performance of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> mixed oxide for diesel soot combustion

A series of Co-modified Ce_0.5Zr_0.5O₂ catalysts with different concentrations of Co (mass %: 0, 2, 4, 6, 8, 10) was investigated for diesel soot combustion. Ce_0.5Zr_0.5O₂ was prepared using the coprecipitation method and Co was loaded onto the oxide using the incipient wetness impregnation method. The activities of the catalysts were evaluated by thermogravimetric (TG) analysis and temperature-programmed oxidation (TPO) experiments. The results showed the soot combustion activities of the catalysts to be effectively improved by the addition of Co, 6 % Co/Ce_0.5Zr_0.5O₂ and that the 8 % Co/Ce_0.5Zr_0.5O₂ catalysts exhibited the best catalytic performance in terms of lower soot ignition temperature (T_i at 349°C) and maximal soot oxidation rate temperature (T_m at 358°C). The reasons for the improved activity were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). These results revealed that the presence of Co could lower the reduction temperature due to the synergistic effect between Co and Ce, thereby improving the activity of the catalysts in soot combustion. The 6 % Co catalyst exhibited the best catalytic performance, which could be attributed to the greater amounts of Co³⁺ and surface oxygen species on the catalyst.     

Sol-Gel Template Synthesis of Highly Ordered LiCo0.5Mn0.5O2 Nanowire Arrays and Their Structural Properties

Highly ordered LiCo_0.5Mn_0.5O₂ nanowire arrays were prepared using porous anodic aluminum oxide (AAO) template from sol-gel solution containing Li(CH₃COO), Co(CH₃COO)₂, and Mn(CH₃COO)₂. Electron microscope results showed that uniform length and diameter of LiCo_0.5Mn_0.5O₂ nanowires were obtained, and the length and diameter of LiCo_0.5Mn_0.5O₂ nanowires are dependent on the pore diameter and the thickness of the applied AAO template. X-ray diffraction and electron diffraction pattern investigations demonstrate that LiCo_0.5Mn_0.5O₂ nanowires are a layered structure of LiCo_0.5Mn_0.5O₂ crystal. X-ray photoelectron spectroscopy analysis indicates that the most closely resembling stoichiometric layered LiCo_0.5Mn_0.5O₂ material has been obtained.     

Catalytic Combustion of Ethyl Acetate over Al2O3- Ce0.5Zr0.5O2 Supported Metal Oxide Catalysts

The catalysts for the combustion of ethyl acetate were prepared using Fe, Co, Cu, Cr, and Mn metal oxide as active components supported on Al₂O₃-Ce_0.5Zr_0.5O₂ mixed oxides and characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), oxygen storage capacity measurement, BET surface area, XPS measurement, and activity test. According to the results of characterization, it was found that Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) catalysts presented excellent activity for the catalytic combustion of ethyl acetate, because of the more reducible species and high reducibility of the catalysts. For ethyl acetate oxidation, more than 99% conversion was achieved at 245 °C over catalysts Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio), indicating that the catalysts had great potential for wide use.     

CuO/Ti0.5Zr0.5O2催化剂对NO+CO反应的催化作用

环境治理是当今社会面临的一大主要问题。目前,城市空气污染日趋严重,特别是工厂和汽车排放的大量未燃烧的烃类、CO、NOx是主要的空气污染物。其中,氮氧化物(NOx)排放状况尤其严重,它的排放会给环境和人们生活带来严重危害,因此,如何有效地消除NOx已成为目前环境保护中一个非常     

Co或Ni促进的Cu/SiO2-Al2O3催化剂上丙三醇和苯胺气相合成3-甲基吲哚

对丙三醇和苯胺在Co或Ni促进的Cu/SiO2-Al2O3催化剂上气相合成3-甲基吲哚进行了研究.采用N2吸附、氢气程序升温还原(H2-TPR)、电感耦合等离子体(ICP)发射光谱、X射线衍射(XRD)、透射电子显微镜(TEM)、氨程序升温脱附(NH3-TPD)及热重(TG)分析等技术对催化剂进行了表征.结果表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂改善了催化剂的催化性能,钴比镍更加有效.在催化剂Cu-Co/SiO2-Al2O3和Cu-Ni/SiO2-Al2O3上,反应第3 h,3-甲基吲哚收率分别达到47%和45%,而且催化剂经过6次再生收率仍能达到44%和42%.各种表征表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂能增强铜和载体之间的相互作用,其结果不仅促进了铜粒子在载体表面的分散度,而且有效减少了反应过程中铜组分的流失.另外,加入钴或镍助剂还能减少催化剂的中强酸中心数,从而提高3-甲基吲哚的选择性,并且抑制积炭的形成.此外,钴助剂还能增加催化剂的弱酸中心数,促进3-甲基吲哚的生成.提出了金属铜与弱酸中心共同促进3-甲基吲哚合成的催化反应机理.     

Methane steam reforming over rhodium promoted Ni/Al2O3 catalysts

The effect of Rh addition upon catalyst characteristics and performance in methane steam reforming was investigated using Rh-promoted Ni/Al₂O₃ catalysts. The number of reduced metal atoms exposed on the surface increased for the Rh-promoted catalysts. Rh-promoted catalysts showed an increase in CH₄ reforming activity; however, constant turnover frequencies for promoted and unpromoted catalysts suggest that the increase in the number of metal surface atoms caused the activity enhancement. Rh also facilitated reduction of Ni/Al₂O₃.