首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 1 毫秒
1.
以不同阴离子表面活性剂作为添加剂种子生长法制备金纳米棒,并考察阴离子表面活性剂种类对金纳米棒形貌及光学性质的影响。在十二烷基苯基磺酸钠(SDBS)存在下,金纳米棒的产率明显高于使用十二烷基磺酸钠的反应体系。对添加SDBS的种子生长法制备金纳米棒的反应条件进行优化,得到十六烷基三甲基溴化铵、SDBS、抗坏血酸和硝酸银的最佳浓度分别为0.04 mol.L-1、2.4 mmol.L-1、1.2 mmol.L-1和0.08 mmol.L-1。在此条件下,金纳米棒的生长在30 min内完成,所制备的金纳米棒表面等离子共振吸收峰位于823 nm,其横纵比为(5±0.03)。当改变生长液中硝酸银浓度时,金纳米棒的尺寸也随之发生改变。此外,我们还探讨了SDBS的作用机理。相对于经典种子生长法,新方法制备纳米金棒在尺寸可调性、单分散性和生物毒性方面明显改善,可广泛应用于各种光学及生物分析。  相似文献   

2.
高倩  钱勇  夏炎  蒋彩云  钱卫平 《化学学报》2011,69(14):1617-1621
报道了一种制备高长径比金纳米棒的新方法. 在25 ℃条件下, 采用种子介导生长法, 通过优化表面活性剂十六烷基三甲基溴化铵(CTAB)的浓度, 制备了长度(200±18.62) nm, 长径比大于10的金纳米棒, 并讨论了金纳米棒的形成机制. 结果表明, 金纳米棒的长径比和纵向吸收波长与CTAB的浓度有关. 此外, 通过提高反应液的离子强度, 利用制备的金纳米棒与球形颗粒不同的静电作用将金纳米棒分离纯化. 运用透射电子显微镜(TEM)和扫描电子显微镜(SEM)对金纳米棒的表面形貌进行表征.  相似文献   

3.
以不同阴离子表面活性剂作为添加剂种子生长法制备金纳米棒, 并考察阴离子表面活性剂种类对金纳米棒形貌及光学性质的影响。在十二烷基苯基磺酸钠(SDBS)存在下, 金纳米棒的产率明显高于使用十二烷基磺酸钠的反应体系。对添加SDBS的种子生长法制备金纳米棒的反应条件进行优化, 得到十六烷基三甲基溴化铵、SDBS、抗坏血酸和硝酸银的最佳浓度分别为0.04 mol·L-1、2.4 mmol·L-1、1.2 mmol·L-1和0.08 mmol·L-1。在此条件下, 金纳米棒的生长在30 min内完成, 所制备的金纳米棒表面等离子共振吸收峰位于823 nm, 其横纵比为(5±0.03)。当改变生长液中硝酸银浓度时, 金纳米棒的尺寸也随之发生改变。此外, 我们还探讨了SDBS的作用机理。相对于经典种子生长法, 新方法制备纳米金棒在尺寸可调性、单分散性和生物毒性方面明显改善, 可广泛应用于各种光学及生物分析。  相似文献   

4.
采用三氯化铁选择性刻蚀法获得了预定长径比的金纳米棒.相比于晶种生长法,三氯化铁选择性刻蚀法可以更加简便快捷地调控金纳米棒形貌.以三氯化铁为刻蚀剂的刻蚀反应优先发生在金纳米棒尖端,这是因为金纳米棒尖端反应活性更高且表面活性剂钝化作用更弱.通过控制刻蚀反应时间及刻蚀剂浓度,可以精确调控金纳米棒的长径比.实验结果表明,增加刻蚀剂浓度、卤素离子浓度以及升高反应温度可以加快刻蚀反应速率.进一步讨论了金属离子的刻蚀作用机理.  相似文献   

5.
金纳米颗粒是近年研究的一种热门材料。介绍了金纳米颗粒主要的制备方法,包括化学还原法,两相法,晶种生长法以及模板法,并总结了金纳米粒子在生物医学、传感器、催化剂、电化学等领域的应用进展。  相似文献   

6.
由于可调的局域表面等离子体共振、丰富的表面可修饰性、良好的生物相容性,金纳米粒子(AuNPs)在生物医药领域具有广泛的应用前景。金与其他无机纳米粒子相结合,既集成了单个组分的性质又有望开发组分间的协同效应,这为构建多功能金纳米复合材料提供了基础。本文阐述了金纳米复合材料的制备方法,包括一步合成法,种子生长法及非原位组装法等;对近期金纳米复合材料在癌症诊疗方面的应用进行总结;最后,讨论了多功能金纳米诊疗平台存在的主要问题及未来发展前景。  相似文献   

7.
通过研究十六烷基三甲基溴化铵、抗坏血酸、NaBH4和AgNO3的用量,以及搅拌时间、反应时间对无种子生长法制备金纳米棒的影响,筛选出了最佳制备条件,以及各成分对金纳米棒生长过程中的作用.采用可见吸收光谱和透射电镜图对不同条件下所制备出的金纳米棒进行了表征.在室温为28℃,CTAB浓度为0.1 mol/L、AgNO3浓度为96μmol/L、AA浓度为0.97 mmol/L、NaBH4浓度为1.5μmol/L,搅拌25 s等最佳条件下,只需反应6h就能够成功制备出长径比为5且形貌均匀、分散性和稳定性良好、轴宽较小的金纳米棒,且有望应用于水环境中Hg2+的检测.  相似文献   

8.
金纳米粒子具有特征的表面等离子共振效应,能吸收和散射特定波长范围的光,有很高的应用价值.作为一种各向异性的金纳米粒子,棒状金纳米粒子的优点在于其等离子共振带的峰位置随粒子的形貌变化而改变,波长可控.目前,液相种子法是制备金纳米棒的最有效方法,但终产物的形貌仍然受到各种物理、化学因素的影响,如溶液浓度、还原剂种类、卤素离子、生长温度、种子用量、p H等,因此制备条件的优化及其生长规律的探究始终是金纳米棒研究的热点.同时,为更精确地控制金纳米棒的形貌,人们还试图对既有粒子做后期修整.本文将对近十多年来金纳米棒形貌控制及其原理方面的研究进行总结分析.  相似文献   

9.
采用简便快捷的无种子法一步完成了纳米金棒的制备.通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移.将巯基聚乙二醇(PEG-SH)置换金棒表面的十六烷基三甲基溴化铵(CTAB)分子,大大提高了金棒的生物相容性.制备的纳米金棒在近红外(NIR)光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.  相似文献   

10.
采用简便快捷的无种子法一步完成了纳米金棒的制备. 通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移. 将巯基聚乙二醇(PEG-SH)置换金棒表面的十六烷基三甲基溴化铵(CTAB)分子,大大提高了金棒的生物相容性. 制备的纳米金棒在近红外(NIR)光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

14.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

15.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

16.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

17.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

18.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

19.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

20.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号