常温直接沉淀法制备ZnO纳米棒

在常温下, 以PEG-400(聚乙二醇400)为表面活性剂, 采用直接沉淀法合成了ZnO纳米棒. 产物用XRD, TEM, SAED和 HRTEM等进行了表征. 结果表明, 所得ZnO为一维的纳米棒, 属于六方纤维矿的单晶结构. ZnO纳米棒的直径在20~40 nm之间, 长度在300~800 nm范围. (0001)面为ZnO纳米棒的生长方向. 讨论了ZnO相的生成和ZnO纳米棒的形成机理以及PEG-400在其形成过程中的作用.     

Zn基片上ZnO及ZnS/ZnO复合纳米阵列的液相合成及发光性质

采用温和的溶液路线在Zn基片上合成了单晶态的ZnO纳米棒阵列、 纳米片阵列和ZnS/ZnO复合双层纳米棒阵列. 使用X射线粉末衍射仪、 扫描电子显微镜、 高分辨透射电子显微镜、 X射线光电子能谱仪等对产物的组成、 结构及形貌进行了表征. 讨论了表面活性剂在液相合成中对产物形貌的调控作用. 通过室温发射光谱的测定, 研究了所得纳米阵列材料的发光性质.     

氧化锌纳米棒的水热合成及其光催化性能

以分析纯ZnO作为锌源、NaOH为矿化剂、盐酸为反应溶液pH调节剂,利用水热反应制备了花状ZnO纳米棒;采用扫描电子显微镜和X射线衍射仪分析了产物的形貌和结构,考察了水热温度以及Zn2+和OH-浓度比对产物形貌的影响;以甲基橙为目标降解物,采用紫外-可见分光光度计研究了ZnO纳米棒的光催化性能.结果表明,在水热反应温度80℃、Zn2+/OH-浓度比1∶7.5条件下所得ZnO纳米棒呈花状聚合,直径约为200nm,长度约为2μm,具有六方纤锌矿结构.当甲基橙初始浓度为30 mg.L-1、ZnO纳米棒的投放量为1.5g.L-1时,以300W紫外灯照射150min,甲基橙的降解率可达90%.     

醇热法制备ZnO纳米棒及其发光性能

在常压条件下,以油酸为分散剂一步反应醇热法制备ZnO纳米棒,利用XRD、SEM、TEM、HRTEM和FTIR等分析技术对产物进行了表征,对产物退火前后的光致发光性能进行了测试,并对ZnO纳米棒生长机理进行讨论. 结果表明,ZnO纳米棒沿[001]方向择优取向生长,直径为10～15 nm,长度为150～200 nm,油酸与ZnO表面Zn(Ⅱ)以螯合键形式相结合,具有良好的近紫外发光性能. 随着退火温度升高,产物深能级发光强度先降低后增加.     

具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合物纳米片阵列的制备及其电化学性能

通过两步水热合成法制备了具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列.首先,以碳布为基底,水热法生成的ZnO沉积在碳布上形成ZnO纳米棒花簇.其次,以ZnO纳米棒为模板,水热法生成的Ni-Co双氢氧化物纳米片沉积在ZnO纳米棒表面,形成ZnO纳米棒@Ni-Co双氢氧化物纳米片复合材料阵列.形貌、结构分析和电化学性能测试表明,以碳布为基底,成功地合成了以ZnO纳米棒为模板并具有核壳结构的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列,该复合材料纳米片阵列具有较大的纵横比,且分散均匀.合成的ZnO纳米棒@Ni-Co双氢氧化物复合材料纳米片阵列具有良好的电化学性能,当电流密度为1 A/g时,其比电容值可达531.6 F/g,该复合材料在超级电容器电极材料领域具有良好的应用前景.     

电沉积制备ZnO纳米棒修饰电极上氧化还原蛋白的电化学行为

采用恒电位阴极还原法在金电极表面一步修饰ZnO纳米棒, 制备成ZnO纳米棒修饰电极. 扫描电子显微镜(SEM)和X射线衍射(XRD)结果显示制得的ZnO为直径约100 nm的六棱柱状纤锌矿晶体纳米棒. 使用ZnO纳米棒修饰的金电极研究细胞色素c的直接电化学行为, 结果表明: ZnO纳米棒修饰的金电极能有效探测到细胞色素c的铁卟啉辅基在不同价态下的电化学行为; 细胞色素c吸附后, ZnO纳米棒修饰的金电极对过氧化氢的电流响应呈现良好的线性关系.     

化学溶液沉积法制备单分散氧化锌纳米棒阵列

在由溶胶凝胶法制备的纳米ZnO薄膜基底上, 采用化学溶液沉积法制备了单分散、高度取向的ZnO纳米棒阵列膜. 通过控制纳米ZnO薄膜的制备工艺, 可以调节氧化锌纳米棒的直径. 利用FESEM, TEM, HRTEM, SAED和XRD表征了氧化锌纳米棒阵列的形貌和晶体结构. ZnO纳米棒的室温PL谱具有很高的紫外带边发射峰, 在可见光波段无发射峰, 表明该方法制备的ZnO纳米棒晶体结构完整, 晶体中O空位的浓度很低.     

P3HT/CdS/TiO2/ZnO一维有序核壳式纳米棒阵列的构制及其在杂化太阳电池中的应用研究

采用恒电位法在铟锡氧化物导电玻璃(ITO)上制备了高度有序一维ZnO纳米棒阵列,将ZnO纳米棒阵列在TiO2溶胶中采用提拉法制备出了一维TiO2/ZnO核壳式纳米棒阵列.在一维TiO2/ZnO核壳式纳米棒阵列上电沉积CdS纳米晶得到一维CdS/TiO2/ZnO核壳式纳米棒阵列,然后在一维CdS/TiO2/ZnO核壳式纳米棒阵列上电沉积聚3-己基噻吩(P3HT)薄膜得到P3HT/CdS/TiO2/ZnO核壳式纳米结构薄膜.以该纳米结构薄膜电极为光阳极制备出新型纳米结构杂化太阳电池,研究了该类电池的光电转换性能,初步探讨了该类电池的工作机理.     

TiO2/ZnO薄膜电极中光生电子的传输及其在太阳电池中的应用

制备了TiO2纳米颗粒和ZnO纳米棒混合的多孔薄膜电极, 利用瞬态光电压技术研究了染料敏化TiO2/ZnO薄膜中光生载流子的传输特性. 实验结果表明, ZnO纳米棒增加了薄膜中自由电子扩散速率, 减小了复合几率, 改善了能量转换效率.     

Co掺杂ZnO纳米棒的水热法制备及其光致发光性能

以Zn(NO3)2·6H2O 和Co(NO3)2·6H2O为原料, 通过水热法在较低温度下制备了纯ZnO和Co掺杂的ZnO(ZnO:Co)纳米棒. 利用XRD、EDS、TEM和HRTEM对样品进行了表征, 结合光致发光(PL)谱研究了样品的PL性能. 结果表明, 水热法制备纯ZnO和ZnO:Co纳米棒均具有较好的结晶度. Co2+是以替代的形式进入ZnO晶格, 掺入量为2%(原子分数)左右. 纯的ZnO纳米棒平均直径约为20 nm, 平均长度约为180 nm; 掺杂样品的平均直径值约为15 nm, 平均长度约为200 nm左右; Co掺杂轻微地影响ZnO纳米棒的生长. 另外, Co掺杂能够调整ZnO纳米棒的能带结构、提高表面态含量, 进而使得ZnO:Co纳米棒的紫外发光峰位红移, 可见光发光能力增强.     

Electrochemical synthesis of ZnO nanorods/porous silicon composites and their gas-sensing properties at room temperature

The zinc oxide (ZnO) nanorods with different aspect ratio (length/diameter) were grown directly on the porous silicon (PS) substrate through electrochemical synthesis. The obtained ZnO nanorods/PS products were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and gas-sensing test. Comparative study shows that the addition of nonionic polymer polyvinylpyrrolidone (PVP) into oxygenated zinc chloride electrolyte can modulate the crystal growth and the aspect ratio of ZnO nanorods from electrodeposition, thus, influence the gas-sensing properties of ZnO nanorods/PS composites. With appropriate amount of PVP in the electrolyte, the product possessing high-density and large aspect ratio ZnO nanorods has an obvious improvement of the NO₂-sensing performances with high sensitivity, fast response-recovery characteristic, and good repeatability and selectivity. The gas-sensing mechanism was discussed in the paper. The result indicated that the heterojunction effect of ZnO nanorods and PS may be responsible for the excellent gas-sensing properties.     

Sb掺杂大尺寸ZnO纳米棒的制备及其特性研究

采用化学气相沉积法,在没有采用任何催化剂的条件下,在Si(100)衬底上成功制备出Sb掺杂大尺寸ZnO纳米棒,并对样品进行了结构和光学性质的表征。结果表明:纳米棒为结晶质量较好的六角纤锌矿结构,在能量色散谱(EDS)中观测到了Sb元素的存在。此外,在低温光致发光(PL)光谱中还观测到了与Sb掺杂相关的中性受主束缚激子发光峰(A0X)、自由电子到受主能级跃迁的发光峰(FA)、施主受主对(DAP)以及DAP的一级纵向光声子伴线(DAP-1LO),因此证实Sb元素作为受主杂质掺杂已进入ZnO晶格。     

Photochemical reduction of sulfur in the presence of ZnO nanoparticles in ethanol

The photochemical reduction of sulfur by the action of ZnO nanoparticles of various shapes and sizes under the conditions of stationary and pulsed photoexcitation was studied. The mechanism of this process was proved; the main route to the formation of the reaction product zinc sulfide is reduction of the sulfur by photochemically produced metallic zinc. It was demonstrated that ordered agglomerates of ZnS nanoparticles in the form of nanotubes and nanorods are formed in the systems based on ZnO nanorods.     

离子液体中ZnO纳米棒的制备与表征

离子液体中ZnO纳米棒的制备与表征;离子液体;ZnO纳米棒;热分解     

The Development of Highly Sensitive and Selective Immunosensor Based on Antibody Immobilized ZnO Nanorods for the Detection of D‐Dimer

ZnO nanorods were grown on gold coated glass substrate by low temperature aqueous chemical growth method. Scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques were used for the characterization of ZnO nanorods. ZnO nanorods are highly dense, uniform, well aligned and perpendicular‐oriented to the substrate. ZnO nanorods exhibited good crystal quality. The well aligned ZnO nanorods were potentially used for the development of selective and sensitive immunosensor for the detection of D‐dimer by immobilizing antibody on stabilized lipid films. The ZnO nanorods based immunosensor responded to a wide range of D‐dimer concentrations with fast response time of ca. 20 s.     

Pt纳米花/ZnO复合阵列的制备及对甲醇氧化催化的研究

利用调控ZnO纳米棒阵列的疏水、亲水性,由电化学方法制备了Pt纳米花/ZnO(PtNF/ZnO)复合阵列.该复合阵列排列规则、尺寸均一、方向一致.每一根ZnO纳米棒的顶端都覆盖着由Pt纳米颗粒构成的Pt纳米花,具有大的比表面积.与以亲水性的ZnO纳米棒制得的覆盖Pt纳米颗粒的ZnO复合阵列(PtNP/ZnO)以及单独的Pt颗粒相比,PtNF/ZnO复合阵列对甲醇氧化具有更高的电化学催化活性.     

Fabrication and Visible Light Photocatalytic Activity of Co-doped ZnO Nanorods

Co-doped ZnO nanorods were prepared by electrochemical deposition method in aqueous solution. lb study the as-grown samples, several characterizations were carried out. The scanning electron microscopy（SEM） images show that the samples present a rod-like shape with hexagonal cross sections and roughened surthce. There is a slight shift for （002） diffraction peak of Co-doped ZnO nanorods in XRD because Co2~ ions entered into the ZnO lattice. Energy-dispersive X-ray spectroscopy（EDS） and X-ray photoelectron spectroscopy（XPS） results also show the exist of Co in the sample. Photoluminescence（PL） spectra of the samples were observed at room tempera- ture, the UV emission of Co-doped ZnO shows a slight red shift compared with that of undoped ZnO. Thus, we can reach the conclusion that Zn2＋ ions have been substituted by Co2. ions in the ZnO samples. In addition, photocatalysis property of Co-doped ZnO nanorods was investigated under the irradiation of visible light. It was found that the degradation rate of methyl orange is increased greatly nanorods. by Co-doped ZnO nanorods in comparison to undoped ZnO     

Influence of different substrates on ZnO nanorod arrays properties

Zinc Oxide (ZnO) nanorod arrays were grown on different substrates by hydrothermal method. The crystallinity of ZnO nanorod was regularly investigated by X-ray diffraction (XRD). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to examine morphology of the ZnO nanorods. The results indicate that the nanorods grow along [002] orientation. SEM and TEM images and XRD patterns show that the growth of ZnO nanorods on graphene/Quartz substrate is better than the other substrates due to the number and size of the nanorods which are highly affected through the properties of ZnO seed layers and it has lower defects than the other substrates. PL spectra ZnO would have a higher concentration of oxygen vacancy.