巯基化改性壳聚糖在电化学生物传感器制备中的应用

以壳聚糖、N-乙酰-L-半胱氨酸(NAC)为原料,以1-羟基苯并三唑(HOBt)和1-乙基-3-(3-二甲基胺丙基)碳化二亚胺盐酸盐(EDAC)为缩合剂,合成功能化壳聚糖衍生物巯基壳聚糖(CHS-NAC).用红外光谱(FTIR)、核磁共振(1H-NMR)及X射线衍射(XRD)对其结构进行表征,用Ellman’s试剂通过标准曲线法测得巯基含量.利用CHS-NAC的黏附性,通过层层吸附的方法将CHS-NAC、纳米金及细胞色素c分别修饰到玻碳电极(GC)上,通过扫描电子显微镜(SEM)对修饰电极表面的形貌进行了观察,采用循环伏安和电化学阻抗研究了不同修饰膜电极的电化学行为,及扫描速率对细胞色素c修饰电极的影响,并开展了对过氧化氢的电催化分析.实验结果表明,CHS-NAC能高效地将纳米金及细胞色素c固定在电极表面,并能有效发挥纳米金辅助转移电子及细胞色素c对过氧化氢催化的能力.     

细胞色素c／L-半胱氨酸修饰金电极检测亚硝酸根

采用循环伏安法、交流阻抗法研究了组装在L-半胱氨酸(L-Cys)修饰金电极上的细胞色素c(Cyt c)电化学行为;采用电化学方法以及紫外-可见光谱对电极进行表征.结果表明:通过静电吸附作用组装在L-Cys修饰金电极上的细胞色素c保持了良好的生物和电化学活性,用Cyt c/L-Cys修饰金电极检测亚硝酸根,响应电流与亚硝酸根浓度在5.0×10-6～4.5×10-4mol·L-1范围内呈线性关系,线性回归方程为Ip=0.031 c 8.165×10-6,相关系数为0.999 5,检出限(S/N=3)为1.5×10-7mol·L-1.电极用于模拟样品及咸菜样品中亚硝酸根的测定,回收率为89.0%～116.0%.     

电聚合茜素黄R构建辣根过氧化物酶传感器的研究

利用电聚合茜素黄R(AYR)的方法,将辣根过氧化物酶(HRP)和细胞色素c(Cyt c)固载于通过一步法电沉积的碳纳米管-金纳米粒子(MWCNTsAu NPs)复合纳米材料修饰电极表面,构筑PAYR-HRP-Cyt c/M WCNTs-Au NPs修饰电极,并利用HRP对H2O2的直接电化学催化行为对H2O2进行检测。采用扫描电镜对MWCNTs-Au NPs和PAYR-HRP-Cyt c的表面形貌进行表征。利用电化学阻抗对修饰电极的构筑过程进行了监测。采用循环伏安法和计时电流法对修饰电极的电化学行为进行了研究。探讨了p H和电位对该修饰电极测定H2O2的性能的影响。该传感器对H2O2在5.0×10-7~3.14×10-3mol/L范围内呈良好的线性响应,相关系数为0.9997,灵敏度为0.50 A·L/mol,检出限(S/N=3)为9.6×10-8mol/L。     

吡啶、2-甲基吡啶存在下细胞色素c碱式异构化和配体细胞色素c配合物的电化学研究

用半胱氨酸修饰的金电极研究了吡啶、2 甲基吡啶存在下细胞色素c碱式异构化和配体结合细胞色素c的电化学。在此电极上 ,细胞色素c可发生准可逆的电极反应而吡啶结合细胞色素c和 2 甲基吡啶结合细胞色素c在循环伏安图上只给出还原峰。高浓度 (1.2 7mol·L- 1)的吡啶和 2 甲基吡啶可诱导碱式细胞色素c在中性条件下生成。进一步的研究表明 ,这种诱导作用与配体和细胞色素c的键合无关     

三维有序结构的金掺杂纳米TiO_2修饰电极用于H_2O_2的测定

在ITO玻璃表面构建了三维有序多孔结构的金掺杂纳米Ti O2薄膜(3DOM GTD/ITO),同时制备了一种细胞色素c(Cyt c)酶生物传感器(Cyt c/3DOM GTD/ITO)。通过透射电镜(TEM)、扫描电镜(SEM)对修饰电极进行表征。紫外-可见光谱实验表明吸附在GTD上的Cyt c能够保持其生物活性,二级结构未被破坏。同时研究了Cyt c在3DOM GTD/ITO修饰电极表面的直接电化学及对H2O2的电催化行为。结果显示,Cyt c在3DOM GTD/ITO修饰电极上有显著的直接电化学响应,峰电流与扫描速度呈线性关系,说明该电极过程是表面电化学控制过程。Cyt c/3DOM GTD/ITO修饰电极对H2O2具有良好的催化性能,线性范围为3.0×10-7~1.70×10-5mol/L,检出限为3.6×10-8mol/L(S/N=3),响应时间为5 s,且该修饰电极具有较好的重现性和稳定性。     

细胞色素c在L-半胱氨酸自组装膜电极上的电化学行为

细胞色素c在L-半胱氨酸自组装膜电极上的电化学行为;细胞色素c; L-半胱氨酸; H2O2; 金电极     

细胞色素c在硒代胱氨酸修饰电极上的直接电化学

采用电化学和接触角实验方法研究了硒代胱氨酸自组装膜修饰金电极(SeCys SAMs/Au)和十六烷基三甲基溴化铵(CTAB)-硒代胱氨酸自组装复合膜修饰金电极(CTAB-SeCys SAMs/Au)的特性. 探讨了细胞色素c(Cyt c)在SeCys SAMs/Au电极和CTAB-SeCys SAMs/Au电极上的电化学行为. 实验证明SeCys可促进Cyt c在电极上的氧化还原反应, 加入CTAB后其与SeCys之间的协同作用可在Cyt c与电极之间形成一个开放的通道, 促进作用更加明显, 且在一定浓度范围内, 随CTAB浓度(1×10^-5-1×10^-4 mol·L^-1)的增大, Cyt c在CTAB-SeCys SAMs/Au电极上的氧化还原电流增大, 在接近临界胶束浓度处出现极大值. 在CTAB-SeCys SAMs/Au电极上Cyt c产生一对氧化还原峰, 其峰电位分别为0.305和0.235 V, 其电化学过程受扩散控制. 光谱实验证实SeCys对Cyt c电化学过程的促进作用是由于SeCys与Cyt c中赖氨酸残基的结合.     

细胞色素c在羟基磷灰石修饰玻碳电极上的直接电化学

采用沉淀法合成羟基磷灰石纳米晶体，由于具有独特的多吸附位点特征，羟基磷灰石可作为一种新型电子传递促进剂用于细胞色素c的直接电化学研究．在pH7．0的磷酸盐缓冲溶液中，细胞色素c在羟基磷灰石修饰玻碳电极表面于0．074V(vs．Ag/AgC1)处有一对准可逆的氧化还原峰，为细胞色素c血红素辅基Fe(Ⅲ)／Fe(Ⅱ)电对的特征峰．实验结果表明细胞色素c与羟基磷灰石之间的静电作用．促进了细胞色素c在玻碳电极表面扩散控制的准可逆单电子转移过程．讨论了电位扫描速度、溶液离子强度对细胞色素c直接电化学的影响．     

纳米金–壳聚糖修饰电极循环伏安法测定抗坏血酸

介绍纳米金–壳聚糖修饰电极的制备方法及其测定抗坏血酸的分析应用。采用电沉积方法,将氯金酸与壳聚糖的混合电解液直接共沉积,制备了壳聚糖–纳米金修饰玻碳电极的电化学传感器。利用循环伏安法研究了抗坏血酸浓度、p H值等对抗坏血酸在修饰电极上的电化学行为的影响。实验结果表明,修饰电极对抗坏血酸具有良好的电催化氧化作用,抗坏血酸浓度在5×10~(–5)~1×10~(–3) mol/L范围内线性良好,回归方程为I_p=0.433 8c+0.881 9,相关系数为0.998 71。该法可指导纳米金–壳聚糖修饰电极的制备及抗坏血酸含量的测定。     

细胞色素c在纳米杂化膜修饰玻碳电极上的直接电化学

以多壁碳纳米管(MWNTs)修饰玻碳(GC)电极为基底,自组装金纳米粒子(AuNPs)及L-半胱氨酸(L-Cys)研制杂化膜修饰电极(L-Cys/AuNPs/MWNTs/GC).实验表明,该膜修饰电极在pH=7.0的KH2PO4-K2HPO4缓冲溶液中对细胞色素c(Cyt c)的直接电子转移反应具有良好的电催化作用,C...     

An indium tin oxide electrode modified with gold nanorods for use in potential-controlled surface plasmon resonance studies

The modification of electrodes with gold nanoparticles results in an increased electrode surface area, enhanced mass transport, and improved catalytic properties. We have extended this approach to indium tin oxide (ITO) electrodes to obtain optically transparent gold nanorod-modified electrodes which display enhanced electrochemical capabilities and have the additional advantage of showing a tunable surface plasmon resonance. The procedures for attaining high surface coverage (15 gold nanorods per square µm) of such electrodes were optimized, and the potential-dependent surface plasmon resonance was studied under controlled electrical potential. In an exemplary sensor application, we demonstrate the detection of mercury via potential-dependent formation of an Au-Hg amalgam.

金修饰ZnO纳米棒阵列制备及对甲醛气敏性能

通过两步溶液法在氧化铝陶瓷管上先制备出ZnO纳米棒阵列,再用真空蒸镀法在ZnO纳米棒表面形成一层均匀Au膜,于500℃下热处理得到Au纳米颗粒修饰的ZnO(Au-ZnO)纳米棒阵列体系。通过场发射扫描电子显微镜(FE-SEM)和X射线衍射仪(XRD)对ZnO纳米棒阵列和Au-ZnO纳米复合体系进行表面形貌表征和结构分析。气敏性能测试结果表明,Au-ZnO纳米复合体系在300℃下对1000μL·L-1甲醛的灵敏度为41.5,而在200℃下灵敏度仍能达到10.3,表明可以制备低工作温度下气敏性能良好的甲醛气敏传感器。     

Hydrothermal Synthesis and Field Enhancement Behavior of ZnO Nanorods Pattern

We provide a new way to prepare ZnO nanorods pattern from the solution composed of hexamethylenetetramine (HMT) and Zn(NO₃)₂. The substrate is ITO substrate covered by well ordered Au islands. Since Au and the underneath ITO substrate have two different nucleation rates in the initial stage of heterogeneous nucleation process, the subsequent ZnO growth on the quick nucleating area takes place under diffusion control and is able to confine the synthesis of ZnO nanorods to specific locations. The concentrations of zinc nitrate and HMT are well adjusted to show the possibility of the new route for the patterning of the ZnO nanorods. Furthermore, the nanorods pattern was characterized by X-ray diffraction and photoluminescence and the performance of field emission property from ZnO nanorod patterns was investigated. The ZnO nanorods pattern with a good alignment also shows a good field enhancement behavior with a high value of the field enhancement factor.     

Surface‐Plasmon‐Enhanced Band Emission of ZnO Nanoflowers Decorated with Au Nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower‐like fashion, was synthesized by using a hydrothermal method. The temperature‐dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Surface-plasmon-enhanced band emission of ZnO nanoflowers decorated with Au nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower-like fashion, was synthesized by using a hydrothermal method. The temperature-dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC)

Well-aligned ZnO nanorods (NRs) were grown on indium-tin-oxide (ITO) slide by the hydrothermal method and used as templates for preparing ZnO/Au composite nanoarrays. The optical and morphological properties of ZnO/Au composites under various HAuCl(4) concentrations were explored via UV-vis absorption spectroscopy, photoluminescence (PL) and scanning electron microscopy (SEM). The density and size of gold nanoparticles (Au NPs) on ZnO NRs can be controlled by adjusting the concentration of HAuCl(4). The optimal ZnO/Au composites display complete photocatalytic degradation of methyl blue (MB) within 60 min, which is superior to that with pure ZnO NRs prepared by the same method. The reason of better photocatalytic performance is that Au NPs act as electron traps and it prevents the rapid recombination of electrons and holes, resulting in the improvement of photocatalytic efficiency. The photocatalytic performance of ZnO/Au composites is mainly controlled by the density of Au NPs formed on ZnO NRs. The application in rapid photodegradation of MB shows the potential of ZnO/Au composite as a convenient catalyst for the environmental purification of organic pollutants.     

Ag/ZnO Catalysts with Different ZnO Nanostructures for Non‐enzymatic Detection of Urea

Silver coated ZnO nanorods and nanoflakes with different crystallographic orientations were synthesized by a combination of sputter deposition and solution growth process. Catalytic properties of morphology‐dependent Ag/ZnO nanostructures were then investigated for urea sensors without enzyme. Ag/ZnO nanorods on carbon electrodes exhibit a higher catalytic activity and an improved efficiency than Ag/ZnO nanoflakes on carbon electrodes. Ag/ZnO nanorod catalysts with more electrochemically surface area (169 cm² mg^?1) on carbon electrode facilitate urea electrooxidation due to easier electron transfer, which further promotes the urea electrolysis. The Ag/ZnO nanorod catalysts also show a significant reduction in the onset voltage (0.410 V vs. Ag/AgCl) and an increase in the current density (12.0 mA cm^?2 mg^?1) at 0.55 V vs Ag/AgCl. The results on urea electrooxidation show that Ag/ZnO nanostructures can be a potential catalyst for non‐enzymatic biosensors and fuel cells.     

Strong metal-support interactions between gold nanoparticles and ZnO nanorods in CO oxidation

The catalytic performances of supported gold nanoparticles depend critically on the nature of support. Here, we report the first evidence of strong metal-support interactions (SMSI) between gold nanoparticles and ZnO nanorods based on results of structural and spectroscopic characterization. The catalyst shows encapsulation of gold nanoparticles by ZnO and the electron transfer between gold and the support. Detailed characterizations of the interaction between Au nanoparticles and ZnO were done with transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and FTIR study of adsorbed CO. The significance of the SMSI effect is further investigated by probing the efficiency of CO oxidation over the Au/ZnO-nanorod. In contrast to the classical reductive SMSI in the TiO(2) supported group VIII metals which appears after high temperature reduction in H(2) with electron transfer from the support to metals, the oxidative SMSI in Au/ZnO-nanorod system gives oxygen-induced burial and electron transfer from gold to support. In CO oxidation, we found that the oxidative SMSI state is associated with positively charged gold nanoparticles with strong effect on its catalytic activity before and after encapsulation. The oxidative SMSI can be reversed by hydrogen treatment to induce AuZn alloy formation, de-encapsulation, and electron transfer from support to Au. Our discovery of the SMSI effects in Au/ZnO nanorods gives new understandings of the interaction between gold and support and provides new way to control the interaction between gold and the support as well as catalytic activity.     

常温直接沉淀法制备ZnO纳米棒

在常温下, 以PEG-400(聚乙二醇400)为表面活性剂, 采用直接沉淀法合成了ZnO纳米棒. 产物用XRD, TEM, SAED和 HRTEM等进行了表征. 结果表明, 所得ZnO为一维的纳米棒, 属于六方纤维矿的单晶结构. ZnO纳米棒的直径在20~40 nm之间, 长度在300~800 nm范围. (0001)面为ZnO纳米棒的生长方向. 讨论了ZnO相的生成和ZnO纳米棒的形成机理以及PEG-400在其形成过程中的作用.     

Graphene Oxide/ZnO Nano Composite for Sensitive and Selective Electrochemical Sensing of Levodopa and Tyrosine Using Modified Graphite Screen Printed Electrode

Determination of levodopa and tyrosine as two important species for treatment of Parkinson's disease is described. A novel electrochemical sensor involving graphene oxide/ZnO nanorods (GR/ZnO) nano composite and the graphite screen‐printed electrodes (GSPE) was developed for the simultaneous detection of levodopa and tyrosine. The screen‐printed electrodes with several advantages, including low cost, versatility and miniaturization were employed. On the other hand, the graphene oxide/ZnO nanorods nano composite was casted on the surface of GSPE to obtain GR/ZnO/SPE. The proposed nano sensor has excellent performance such as high sensitivity, good selectivity and analytical application in real samples. The combination of graphene oxide/ZnO nanorods nano composite with the screen‐printed electrode is favorable for amplifying electrochemical signals. Under optimized conditions square wave voltammetry (SWV) exhibited linear dynamic ranges from 1.0×10^?6 to 1.0×10^?3 M and 1.0×10^?6 to 8.0×10^?4 M with detection limits of 4.5×10^?7 M and 3.4×10^?7 M for levodopa and tyrosine respectively.