含铜MCM-48催化剂上糠醛选择性加氢制糠醇

 以MCM-48为载体,采用新颖的负载方法(有机官能团化法)制备了铜基负载型催化剂. 结果表明,活性组分以较高的负载量均匀地分散在载体MCM-48表面,且负载活性组分后,分子筛的结构未被明显破坏. 本文首次将采用此负载方法制备的铜基MCM-48催化剂用于糠醛选择性加氢制糠醇反应,并得到了较高的活性、稳定性及糠醇选择性,该催化剂可以与商业催化剂相比,具有潜在的工业应用价值. 与一维结构的MCM-41相比,三维孔道结构的MCM-48有效避免了孔堵塞,大大提高了催化剂的稳定性. 引入助剂镧有利于羰基加氢,明显提高了糠醛的转化率. 使用后的催化剂并未被氧化,催化剂失活的主要原因之一是积炭.     

HY／MCM-41／γ-A12O3负载的硫化态Ni-Mo-P催化剂上萘的加氢

采用水热法合成了不同SiO2／Al2O3比的MCM-41介孔分子筛．并分别以HY／MCM-41／γ-A1203，HY／γ-A12O3和γ-Al2O3为载体，用浸渍法制备了Mo-Ni-P催化剂．以萘为模型化合物，考察了硫化态Mo-Ni-P催化剂的加氢活性．结果表明，不同载体负载的催化剂催化活性均随着活性组分负载量的增大而提高，其中掺杂大比表面MCM-41的HY／MCM-41/γ-Al2O3所负载的催化剂催化活性提高幅度最大．由于MCM-41与HY分子筛在酸性和孔结构上存在互补性，因而催化剂对萘加氢存在协同作用．提出了萘加氢的反应机理，认为反应网络包括两个平行路径：-是萘加氢生成四氢萘后发生异构化或开环反应；二是萘加氢生成四氢萘后进-步加氢生成十氢萘，继而发生异构化或开环反应．     

表面富锡MCM-41分子筛的表面金属有机化学制备及其对苯酚羟基化催化反应性能研究

采用SnBu₄在MCM-41表面的接枝反应和后续处理制备出了一种只在表面含锡的MCM-41型介孔分子筛。通过与采用纳米SnO₂和MCM-41机械混合法、SnCl₄浸渍法、水热合成法等制备的具有相当硅锡比(Si/Sn≈100)的SnMCM-41分子筛进行结构和对苯酚羟基化反应催化性能的比较发现， 由该法所得分子筛的水热稳定性明显提高，并在苯酚羟基化反应中表现出优良的催化活性、选择性和过氧化氢利用率。本文还详细考察了该催化剂对苯酚羟基化反应的最佳反应条件。     

HY/MCM-41/γ-Al2O3负载的硫化态Ni-Mo-P催化剂上萘的加氢

 采用水热法合成了不同SiO2/Al2O3比的MCM-41介孔分子筛. 并分别以HY/MCM-41/γ-Al2O3, HY/γ-Al2O3和γ-Al2O3为载体,用浸渍法制备了Mo-Ni-P催化剂. 以萘为模型化合物,考察了硫化态Mo-Ni-P催化剂的加氢活性. 结果表明,不同载体负载的催化剂催化活性均随着活性组分负载量的增大而提高,其中掺杂大比表面MCM-41的HY/MCM-41/γ-Al2O3所负载的催化剂催化活性提高幅度最大. 由于MCM-41与HY分子筛在酸性和孔结构上存在互补性,因而催化剂对萘加氢存在协同作用. 提出了萘加氢的反应机理,认为反应网络包括两个平行路径: 一是萘加氢生成四氢萘后发生异构化或开环反应; 二是萘加氢生成四氢萘后进一步加氢生成十氢萘,继而发生异构化或开环反应.     

介孔催化剂上苯酚和二氧化碳直接合成碳酸二苯酯

采用等体积浸渍法制备了介孔分子筛SiMCM-41负载的ZnCl2、ZnO、FeCl3和Fe2O3催化剂,并用于苯酚与二氧化碳在CCl4溶液中合成碳酸二苯酯.采用29SiNMR、ICP、XRD和UV-Raman等技术对催化剂的结构性质、活性组分和载体间的相互作用以及反应前后催化剂结构变化等进行了研究.结果表明,载体SiMCM-41在反应过程中表现出较高的稳定性,ZnCl2、ZnO、FeCl3及Fe2O3负载到介孔SiMCM-41上,金属离子和载体表面硅羟基结合生成固载型活性中心,防止了金属离子在反应过程中从催化剂表面的流失.以二氧化碳、苯酚和碳酸钾为原料,在四氯化碳溶液中反应合成碳酸二苯酯(DPC)时,锌负载催化剂具有较高的催化活性和DPC选择性.     

负载Co介孔分子筛催化热解乙醇制备纳米碳管

以硅酸钠为原料,CTAB为模板剂,水热法合成MCM-41介孔分子筛,采用浸渍法制备负载钴的介孔分子筛(Co/MCM-41),并将其作为催化剂,CVD法热解无水乙醇制备CNTs.利用XRD、TEM、比表面积和孔径分布测定和Raman光谱等方法对所合成的介孔分子筛和纳米碳管进行了表征.结果表明:所制备的Co/MCM-41样品具有典型的MCM-41的介孔结构;当热解反应温度为750℃下所制备出的纳米碳管的品质最好.     

微波法研制碱土金属氧化物负载型MCM-48碱性介孔材料

以立方相介孔分子筛MCM-48为载体,用微波辐射分散MgO或CaO和醋酸镁溶液浸渍等方法研制碱性介孔材料。MCM-48能经受微波辐射,负载碱性客体之后也保持介相结构。异丙醇分解探针反应表明:载体本身没有碱催化活性,而碱性MCM-48介孔材料的活性随温度升高而提高。本文还对介孔材料在微波分散和碱性催化方面的特点进行分析。     

晶化时间对ZSM-5/MCM-48复合分子筛结构及MTG反应性能的影响

采用两步晶化法制备ZSM-5/MCM-48微介孔复合分子筛,通过调变前驱体溶胶的晶化时间获得不同结构的ZSM-5/MCM-48基分子筛催化剂。采用XRD、N2-吸附、SEM、TEM、FT-IR和Py-FTIR等手段进行表征,结果表明,前驱体溶胶的晶化时间对ZSM-5/MCM-48复合分子筛的结构和表面酸性产生重要的影响,而特定结构的复合分子筛基催化剂可以显著改变甲醇制汽油(MTG)反应的产物分布,与ZSM-5基催化剂相比显著降低了油品中芳烃和均四甲苯的含量。阐明了其催化作用机制是由于介孔结构的MCM-48对微孔结构的ZSM-5界面或表面的修饰作用。     

功能化MCM-41在有机合成中的应用

介孔分子筛MCM-41具有较高的比表面和规整的结构以及表面带有羟基,因此可对MCM-41进行官能团化,从而实现均相催化剂在MCM-41中的组装,达到均相催化剂多相化的目的。本文介绍了最近几年以MCM-41为主体,组装均相配合物得到固相化催化剂在氧化、还原、烷基化、氢甲酰化、Heck、环丙烷化等反应中的应用。     

晶化时间对ZSM-5/MCM-48复合分子筛结构及MTG反应性能的影响

采用两步晶化法制备ZSM-5/MCM-48微介孔复合分子筛,通过调变前驱体溶胶的晶化时间获得不同结构的ZSM-5/MCM-48基分子筛催化剂。采用XRD、N₂-吸附、SEM、TEM、FT-IR和Py-FTIR等手段进行表征,结果表明,前驱体溶胶的晶化时间对ZSM-5/MCM-48复合分子筛的结构和表面酸性产生重要的影响,而特定结构的复合分子筛基催化剂可以显著改变甲醇制汽油（MTG）反应的产物分布,与ZSM-5基催化剂相比显著降低了油品中芳烃和均四甲苯的含量。阐明了其催化作用机制是由于介孔结构的MCM-48对微孔结构的ZSM-5界面或表面的修饰作用。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。