孔雀石绿磁性印迹聚合物的制备及其分离应用研究

以Fe3O4作为磁性载体包覆二氧化硅,并通过表面修饰引入碳碳双键,然后采用分子印迹技术,以孔雀石绿为模板分子,α-甲基丙烯酸和4-乙烯基吡啶作为双功能单体,乙二醇二甲基丙烯酸脂为交联剂,通过偶氮二异丁腈引发制备孔雀石绿的磁性印迹聚合物(MMIPs)并对单体和模板分子比例进行优化;分别采用红外光谱(FTIR)、振动样品磁强计(VSM)和透射电子显微镜(TEM)等仪器分析手段,对MMIPs的物理性质及结构进行表征;采用平衡吸附、动力学吸附和选择性吸附实验考察了材料对孔雀石绿的特异性识别能力;运用Scatchard分析,模拟得出磁性印迹聚合物具有两类不同的结合位点,其解离常数分别为1.469 mg/L和8.518 mg/L,对孔雀石绿的最大表观吸附量分别为2.97 mg/g和6.02 mg/g;将该材料应用在鱼肉样品中孔雀石绿及其代谢物隐色孔雀石绿的分离富集,经过对提取液的磁性固相萃取,在低浓度下(2,5,10μg/kg),孔雀石绿和隐色孔雀石绿的样品加标回收率都在合理范围内。     

邻-硝基酚分子印迹聚合物为涂层固相萃取搅拌棒的制备及其萃取性能研究

以邻-硝基酚为模板,甲基丙烯酸二甲胺乙酯和4-乙烯基吡啶为混合单体,利用整体材料"原位"聚合技术制备分子印迹聚合物为涂层的固相萃取搅拌棒(MIP-SBSE)。考察了制备条件对MIP-SBSE选择吸附性能的影响,并与高效液相色谱-二极管阵列检测器联用,探讨MIP-SBSE对环境水样中邻-硝基酚及其它酚类物质的选择萃取性能。考察了样品基底中离子强度、pH值以及吸附时间和解吸时间等萃取条件对目标化合物选择性能影响。结果表明,在最佳萃取条件下,MIP-SBSE对模板分子及其它酚类物质具有一定选择性能和较高的富集能力,对邻-硝基酚的线性范围为3.0～200μg/L;检出限LOD(S/N=3)为0.13μg/L;定量限LOQ(S/N=10)为0.40μg/L。在实际样品分析中,模板分子加标回收率为83.4%～120.9%;其它酚类物质的加标回收率在59.8%～129.0%之间。     

分子印迹聚合物为涂层的吸附萃取搅拌棒在环境水样双酚A含量测定中的应用

以双酚A(BPA)为单体,利用整体材料“原位”聚合技术制备以分子印迹聚合物为涂层的吸附萃取搅拌棒(MIP-SBSE),然后与高效液相色谱(HPLC)-二极管阵列检测器联用,探讨其对环境水样BPA的选择萃取性能。优化萃取过程中吸附和解吸时间、解吸液种类以及基底pH值和离子强度对目标化合物的选择吸附性能。在最佳条件下,MIP-SBSE可对模板分子进行有效的选择吸附,线性范围为1.0～200 μg/L,检出限(S/N=3)和定量限(S/N=10)分别为0.28μg/L和0.94 μg/L。在实际水样分析中,具有良好的加标回收率,其值为96.0%～108.7%。研究结果表明,所建立的方法具有简便、灵敏和环境友好等特点。     

分子印迹固相萃取搅拌棒的制备及对复杂样品中双烯雌酚和己烷雌酚的萃取性能

以己烯雌酚为替代模板,利用整体材料的“原位”合成技术制备了分子印迹聚合物,并将其作为固相萃取搅拌棒的涂层(MIP-SBSE)制备了新的搅拌棒。详细考察了分子印迹聚合物制备条件中模板分子及功能单体用量对MIP-SBSE选择性萃取性能的影响,同时利用元素分析、扫描电镜和红外光谱对聚合物进行表征。以双烯雌酚(DS)和己烷雌酚(HS)为目标化合物,将MIP-SBSE与高效液相色谱-二极管阵列检测器联用,建立起复杂样品中DS和HS的分离分析方法。考察了吸附和解吸时间、解吸溶剂、离子强度和样品pH值等萃取条件对MIP-SBSE选择性萃取性能的影响。结果表明,在最佳萃取条件下,MIP-SBSE对DS和HS具有较高的选择性萃取性能,线性范围分别为1.0～400.0 μg/L和5.0～400.0 μg/L,利用氮吹再定容的方法,对DS和HS的检出限(S/N=3)分别可低至0.04和0.14 μg/L。在对实际污水、蜂蜜和牛尿样品的分析中取得了良好的加标回收率,其值为61.3%～120%。所建方法具有简便、高选择性和灵敏等特点,可用于复杂样品中双烯雌酚和己烷雌酚的分析监测。     

分子印迹磁固相萃取法测定饮料中咖啡因含量

建立了一种磁性分子印迹固相萃取和气相色谱相结合测定饮料中咖啡因含量的新方法。该法自制磁性分子印迹固相萃取材料作为萃取剂,将其分散在样品溶液中,利用外部磁场使磁性萃取剂与溶液快速分离,结合分子印迹技术,提高对分析物的选择性吸附,排除了样品中各类干扰杂质。在最佳条件下进行分析,该方法的检出限为0.05μg/m L(S/N=3),线性范围为0.1~15μg/m L,线性相关系数(R~2)为0.999 1,本法可用于可口可乐、百事可乐、红牛和黑卡六小时试样中咖啡因含量的测定。     

没食子酸磁性表面分子印迹聚合物的制备与选择性识别性能

羟基苯甲酸类化合物用途广泛,极性较强,在复杂水溶液体系中这些类似物的分离纯化与分析非常困难。 本文以磁性Fe₃O₄纳米颗粒为载体,没食子酸(GA)为模板分子,制备了磁性表面分子印迹聚合物(MIP)。 利用透射电子显微镜、红外光谱、磁强测定等检测手段对MIP进行了结构表征。 并对其吸附性能进行研究,比较了该MIP对GA及其它3种结构类似物的吸附性能差异。 结果表明,制备的以GA为模板的磁性分子印迹聚合物为核壳球形结构,键合牢固,对GA的吸附动力学符合准二级动力学方程模型,吸附过程属于Langmuir单分子层吸附。 该聚合物对GA表现出优异的选择性识别能力,其吸附量(318 K时37.736 mg/g)远远高于结构类似物。 该磁性分子印迹聚合物对模板分子不仅具有特异识别能力,而且能够磁控分离,分离效率高,可用于固相萃取。     

孔雀石绿分子印迹表面等离子共振传感器的制备及分析应用

利用表面等离子共振(SPR)光谱,结合分子印迹技术,制备了孔雀石绿分子印迹SPR传感器,建立了检测孔雀石绿的分析方法。探讨了pH值对分子印迹膜吸附特性的影响,并在最佳pH下对其吸附选择性进行了考察。研究结果表明,与相应非印迹传感膜相比,孔雀石绿印迹传感膜对孔雀石绿具有较高的吸附选择性能。该方法测定河水及河泥中孔雀绿的线性范围为8.0×10-10~1.0×10-8 mol/L,检出限(S/N=3)分别为8.83×10-11 mol/L和1.55×10-10 mol/L,平均回收率分别为91.97%和93.88%,相对标准偏差分别为1.2%和2.1%。该方法具有简单、快速、灵敏度高、重复性好等特点,适用于河水和河泥中孔雀石绿的测定。     

磁性表面分子印迹聚合物的合成及其在玉米汁中检测玉米赤霉烯酮的应用北大核心CSCD

本研究以姜黄素为替代模板分子,Fe_(3)O_(4)@SiO_(2)-MPS为磁性载体,采用表面分子印迹技术制备了玉米赤霉烯酮(Zearalenone,ZEN)磁性分子印迹聚合物(ZEN-MMIPs)。使用傅立叶红外光谱(FTIR)、扫描电镜(SEM)、透射电镜(TEM)、振动样品磁强计(VSM)技术对制备的磁性分子印迹纳米微球进行表征。通过吸附动力学和吸附等温线考察了ZEN-MMIPs的吸附性能,其最大吸附容量为0.72 mg/g。以ZEN-MMIPs为磁性分散固相萃取剂,结合高效液相色谱(HPLC)完成了复杂食品基质中ZEN加标样品的痕量检测,线性范围为1~100 mg/L(R^(2)=0.9991),相对标准偏差(RSD)为2.11%,玉米汁样品加标回收率为88.3%~94.7%。本文所建立的方法可用于复杂基质实际样品中ZEN残留的检测。     

分子印迹聚合物纤维固相微萃取-高效液相色谱法测定水中痕量2,4-二氯苯酚

利用分子印迹固相微萃取-高效液相色谱法测定了水中痕量的2,4-二氯苯酚(2,4-DCP)。在石英毛细管中,以2,4-DCP为模板分子,甲基丙烯酸(MAA)为功能单体,聚合反应合成了2,4-DCP分子印迹聚合物纤维,考察模板分子的浓度,功能单体与交联剂的比例,聚合反应时间对制备分子印迹聚合物纤维的影响,优化了2,4-DCP的吸附时间对分子印迹聚合物纤维萃取效率的影响。高效液相色谱法测定了萃取后标准样品溶液中2,4-DCP的含量萃取率大于80%,方法的线性范围为10~120μg/L,检出限为2.5μg/L,相关系数(R2)在0.9993~0.9995之间,实测了自来水、湖水和工业废水水样,加标回收率为91.4%~106.0%,相对标准偏差为1.4%~6.6%。     

分子印迹磁性固相萃取/液相色谱法检测奶制品中的双酚A

以双酚A(BPA)为模板分子,磁性二氧化硅(Fe_3O_4@SiO_2)为载体,4-乙烯基吡啶(4-VP)为功能单体,采用表面分子印迹技术制备了双酚A磁性分子印迹聚合物微球(Fe_3O_4@SiO_2-MIPs)。通过红外光谱、透射电镜等对Fe_3O_4@SiO_2-MIPs进行了结构和形貌的表征。将制得的Fe_3O_4@SiO_2-MIPs作为磁性吸附剂,分离富集奶制品中的BPA,建立了分子印迹磁性固相萃取/液相色谱法测定奶制品中BPA的新方法。结果表明,在优化条件下,Fe_3O_4@SiO_2-MIPs对BPA具有良好的选择性,最大吸附容量达13.50 mg/g,在0.05~5.0 mmol/L浓度范围内有良好的线性关系(r2=0.993 4),方法检出限为0.037μg/L,样品加标回收率为86.2%~93.1%,相对标准偏差为2.9%~3.8%。该方法高效快速,选择性好,可用于牛奶样品中痕量BPA的检测。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.