阴极界面修饰层改善平面p-i-n型钙钛矿太阳能电池的光伏性能

有机/无机杂化金属卤化物钙钛矿半导体材料结合了有机材料良好的溶液可加工性以及无机材料优越的光电特性,近几年受到了热捧,成为太阳能电池领域一颗耀眼的明星. 伴随着钙钛矿薄膜结晶过程和形貌的优化、器件结构的改进以及电极界面材料的开发,这类有机/无机杂化金属卤化物钙钛矿太阳能电池的光电转换效率从最初的3.8%迅速提高到目前最高的22.1%. 其中界面工程在提升器件性能上发挥着极其重要的作用. 本文总结了平面p-i-n型钙钛矿太阳能电池中阴极界面修饰层（CBL）的研究进展. CBL从材料上讲可分为无机金属氧化物、金属或金属盐以及有机材料,从构成上讲可分为单层CBL、双层CBLs以及共混型CBL. 本文对这些类型的CBL分别给予详细的介绍. 最后,我们归纳出CBL在改善器件效率和稳定性上所起的作用以及理想CBL所应满足的要求,希望能为以后阴极界面修饰材料的设计提供一定的借鉴.     

无机纳米-生物界面作用的SERS研究

探索生命体对无机纳米材料的生物应答机制是高效、安全、可控地应用无机纳米材料的基础,其关键在于准确理解在生物体系中无机纳米材料与生物分子间的纳米.生物界面作用.本文主要探讨了在纳米-生物界面具有拉曼增强效应的金、银纳米材料;介绍了表面增强拉曼光谱(surface-enhanced raman spectroscopy,SERS)原位研究金、银等无机纳米材料表/界面吸附的核酸、蛋白质、磷脂等生物分子,以及细胞、病毒和细菌等与金、银纳米材料表/界面作用的研究进展;综述了SERS技术在探索纳米-生物界面作用机制、生物分子测定、生物分子界面行为监测中的应用.     

聚丙烯/锡氟磷酸盐玻璃复合材料的结构与性能

锡氟磷酸盐玻璃(Pglass)具有较低的玻璃化转变温度,在常规聚合物加工温度窗口内具有熔融流动性,是一种新型的无机类聚合物玻璃。本文采用双螺杆挤出机制备了聚丙烯(PP)/Pglass有机聚合物/无机玻璃复合材料,并对其相形貌、界面性能、流动性能、结晶性能、力学性能和热稳定性能进行了研究。结果表明:Pglass以微米级颗粒分散在PP基体中,且两相之间界面明显、相容性较差。Pglass的添加使复合材料的熔体剪切粘度降低。Pglass的存在促进了基体PP的结晶。复合材料的弹性模量随着Pglass含量的增加而增加。Pglass提高了复合材料的热稳定性。     

稀土离子对溶液体系中碳酸钙生成的影响

用X射线粉末衍射、XPS光电子能谱、红外光谱以及ICP-MS等技术研究不同浓度的Ce3+,Nd3+,Tb3+,Gd3+,Lu3+对碳酸钙结晶状况的影响.稀土离子的加入有利于热力学稳定态的方解石型碳酸钙的生成,并且稀土离子能够部分的取代晶格中的钙离子,改变碳酸钙的结晶习性,在宏观上形成有序规则的排列.     

无机钙钛矿太阳能电池稳定性研究进展

近年来钙钛矿太阳能电池发展迅速,全无机钙钛矿具有良好的热稳定性、高吸光系数、带隙可调、制备简单等优点备受关注.现今,无机钙钛矿太阳能电池的最高光电转化效率已达19.03%,具有很好的发展潜力.本综述将从无机钙钛矿太阳能电池的制备方法、薄膜掺杂、界面修饰对稳定性影响入手,系统介绍无机钙钛矿太阳能电池的发展并进行分析总结,并着重分析了无机钙钛矿不稳定的原因及其改善方法,最后对于无机钙钛矿太阳能电池的未来进行了展望.     

无机纳米晶-生物界面作用的分子机制

无机纳米晶材料以其独特的光、电、磁、力学性质,成为疾病诊断与治疗功能的关键材料.本文总结了无机纳米晶的表面化学活性、离子释放性、晶相结构、晶格缺陷、表面吸附和表面修饰等与尺寸相关的理化性质与生物效应之间的关系.综述了无机纳米晶与蛋白质、磷脂生物膜间的界面相互作用,探讨了纳米晶-生物界面作用的分子机理.这有助于理解无机纳米晶的生物行为和毒理性质,指导设计安全、高效的纳米晶生物医学材料.     

纳米生物无机界面的构筑与循环肿瘤细胞分离

纳米生物无机界面的研究是无机化学学科新兴的前沿领域之一。纳米结构的无机材料在仿生界面、细胞界面、生物检测界面等领域扮演着越来越重要的角色。近几年来,无机纳米结构被尝试用于痕量循环肿瘤细胞(Circulating Tumor Cells,CTCs)分离的基础探索研究中,并展现出非常吸引人的应用前景。痕量CTCs的高效分离对于癌症早期检测、术后监测及生物学研究等具有重要的意义。本文主要综述纳米生物无机界面在CTCs分离中的应用,详细介绍其发展现状,并对未来做一展望。     

纳米生物无机界面的构筑与循环肿瘤细胞分离

纳米生物无机界面的研究是无机化学学科新兴的前沿领域之一。纳米结构的无机材料在仿生界面、细胞界面、生物检测界面等领域扮演着越来越重要的角色。近几年来, 无机纳米结构被尝试用于痕量循环肿瘤细胞(Circulating Tumor Cells, CTCs)分离的基础探索研究中, 并展现出非常吸引人的应用前景。痕量CTCs的高效分离对于癌症早期检测、术后监测及生物学研究等具有重要的意义。本文主要综述纳米生物无机界面在CTCs分离中的应用, 详细介绍其发展现状, 并对未来做一展望。     

等规聚丁烯-1与等规聚丙烯间界面的结构与性能研究

基于构建的iPB-1与iPP的双层热压复合膜,设计两相界面结构,并通过撕裂实验、扫描电子显微镜(SEM)和透射电子显微镜(TEM),研究高温退火温度与结晶温度对iPB-1与iPP间界面结构和性能的影响.结果表明,iPB-1/iPP复合样品经退火处理后,界面黏结强度明显下降,且退火温度越高,界面黏结强度和撕裂面粗糙度均越低.另外,经高温退火及两步降温结晶(即iPP于130℃先结晶、iPB-1于60℃后结晶)后,样品的平均界面黏结强度、撕裂面粗糙度、界面层厚度均比经一步降温结晶(iPP和iPB-1于60℃同时结晶)后的更高,且出现iPB-1分子链向iPP相区扩散的界面相结构.     

纳米CaCO_3/相容剂/PP中的界面相互作用研究

采用不同相容剂(PP-g-MAH、POE-g-MAH和EVA-g-MAH)制备了不同界面相互作用的纳米CaCO3(CC)/相容剂/PP体系,研究了相容剂/PP和相容剂/CC界面相互作用对PP/CC的结晶形态、结晶行为、熔融特性和力学性能的影响.观察到PP/CC界面相互作用提高PP结晶温度和PP/CC的模量和冲击强度,但降低了屈服强度.相容剂/CC界面相互作用进一步提高了PP/CC的结晶温度.PP/相容剂界面相互作用取决于PP与相容剂相容性.PP/PP-g-MAH相容性高有利于提高PP/CC的异相成核作用和PP/CC屈服强度和模量,但降低冲击强度.PP/POE-g-MAH部分相容对相容剂/CC界面的异相成核作用、PP/CC屈服强度和模量影响不大,可明显提高冲击强度.但PP/EVA-g-MAH不相容导致PP/CC冲击强度明显降低.     

Properties of amorphous calcium carbonate and the template action of vaterite spheres

The fast mixing of aqueous solutions of calcium chloride and sodium carbonate could immediately result in amorphous calcium carbonate (ACC). Under vigorous stirring, the formed ACC in the precipitation system will dissolve first and, then, transform within minutes to produce crystalline forms of vaterite and calcite. After that, the solution-mediated mechanism dominates the transformation of the thermodynamically unstable vaterite into the thermodynamically stable calcite. Although ACC is the least stable form of the six anhydrous phases of calcium carbonate (CaCO(3)), it could be, however, produced and stabilized by a variety of organisms. To better understand the formation-transformation mechanism of ACC and vaterite into calcite, ex-situ methods (i.e., scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction spectroscopy) were used to characterize the formation-transformation process of ACC and vaterite in aqueous systems without organic additives, showing that ACC sampled at different conditions has different properties (i.e., lifetime, morphology, and spectrum characterization). It is also very interesting to capture the obviously polycrystalline particles of CaCO(3) during the transformation process from vaterite to calcite, which suggests the formation mechanism for the calcite superstructure with multidimensional morphology.     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

Crystallization and Transformation Mechanism of Calcium Carbonate Polymorphs and the Effect of Magnesium Ion

The crystallization of calcium carbonate was carried out by mixing CaCl(2) and Na(2)CO(3) solutions. The morphology of precursor formed prior to the nucleation of the polymorphous crystals (calcite and vaterite) varies depending on the feed concentration. The faster nucleation rate of polymorphous crystals in 0.2 mol/L than in 0.05 mol/L solution results in the prompt disappearance of the precursor at 0.2 mol/L. In 0.05 mol/L solutions the lifetime of the precursor is relatively long. The crystallization fraction of vaterite increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. Vaterite takes on the various morphologies of the aggregates of the primary flocculation body (spherulite) depending on the crystallization conditions. Vaterite transforms to calcite by a direct solution-mediated mechanism. During crystallization the concentration attains a stationary value, which increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. This may be due to the crystal size decrease expected from the Gibbs-Kelvin equation. Magnesium ion suppresses the transformation of vaterite by inhibiting the growth of the calcite. Magnesium ion is selectively included in calcite and causes the increase of the attained concentration and the remarkable change in the morphology of calcite especially in 0.05 mol/L solution. Copyright 2001 Academic Press.     

Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

A systematic examination of the morphogenesis of calcium carbonate in the presence of a double-hydrophilic block copolymer

In this paper, a systematic study of the influence of various experimental parameters on the morphology and size of CaCO3 crystals after room-temperature crystallization from water in the presence of poly(ethylene glycol)-block-poly(methacrylic acid) (PEG-b-PMAA) is presented. The pH of the solution, the block copolymer concentration, and the ratio [polymer]/[CaCO3] turned out to be important parameters for the morphogenesis of CaCO3, whereas a moderate increase of the ionic strength (0.016 M) had no influence. Depending on the experimental conditions, the crystal morphologies can be tuned from calcite rhombohedra via rods, ellipsoids or dumbbells to spheres. A morphology map is presented which allows the prediction of the crystal morphology from a combination of pH, and CaCO3 and polymer concentration. Morphologies reported in literature for the same system but under different crystallization conditions agree well with the predictions from the morphology map. A closer examination of the growth of polycrystalline macroscopic CaCO3 spheres by TEM and time-resolved dynamic light scattering showed that CaCO3 macrocrystals are formed from strings of aggregated amorphous nanoparticles and then recrystallize as dumbbell-shaped or spherical calcite macrocrystal.     

Formation of stable vaterite with poly(acrylic acid) by the delayed addition method

The crystallization of CaCO3 was examined by changing the addition time of poly(acrylic acid) (PAA) to an aqueous solution of calcium carbonate by selectively interacting with the crystal at different stages during the crystal-forming process. The precipitation of CaCO3 was carried out by a double jet method to prevent heterogeneous nucleation on glass walls, and the sodium salt of PAA was added by a delayed addition method. In the initial presence of PAA in an aqueous solution of calcium carbonate, PAA acted as an inhibitor for the nucleation and growth of crystallization. However, it was found that stable vaterite particles were successfully obtained by delaying the addition of PAA from 1 to 60 min. The vaterite particles were stable in the aqueous solution for more than 30 days, and the CaCO3 particles were formed by a spherulitic growth mechanism. It is suggested that PAA strongly binds with the Ca2+ ion on the surface of CaCO3 particles to stabilize the unstable vaterite form effectively. Upon changing the addition time of PAA, we found that CaCO3 particles were formed through different formation mechanisms in selectively controlled crystallization at different stages during the crystallization process.     

Influence of sodium dodecyl sulfate and static magnetic field on the properties of freshly precipitated calcium carbonate

Properties of calcium carbonate precipitated from aqueous solutions of CaCl(2) and Na(2)CO(3) in the presence of sodium dodecyl sulfate (SDS) and S-S 0.1 T magnetic field (MF) were studied. The nucleation and precipitation processes of CaCO(3) were investigated by pH and zeta potential measurements at 20 +/- 1 degrees C up to 2 h after mixing the solutions. Also the amounts of calcium carbonate deposited on the glass surfaces and its structure were examined. It was found that SDS influences the kinetics of precipitation, crystallographic forms, and crystal size of CaCO(3). The SDS effects are more pronounced in MF presence. A small amount of SDS accelerates transformation of vaterite into calcite, whereas increasing surfactant concentration moderates such a transformation. On the other hand, in all the systems, MF in the presence of SDS causes a slower transformation of vaterite into calcite. These effects are reflected in pH and zeta potential changes, although there is no clear dependence between the SDS amount present during the precipitation and changes of the parameters investigated. It seems that MF effect is most significant at a defined optimal SDS concentration. The results, however, do not allow suggestion of any detailed mechanism of the field interaction.     

Influence of conducting polymers based on carboxylated polyaniline on in vitro CaCO3 crystallization

Conducting polymers are interesting materials of technological applications, while the use of polymers as additives controlling crystal nucleation and growth is a fast growing research field. In the present article, we make a first step in combining both topics and report the effect of conducting polymer derivatives, which are based on carboxylated polyanilines (c-PANIs), on in vitro CaCO3 crystallization by the Kitano and gas diffusion method. This is the first example of the mineralization control of CaCO3 by a rigid carboxylated polymer. Both the concentration of c-PANI and the presence of carboxylate groups have a strong influence on the CaCO3 crystallization behavior and crystal morphology. X-ray diffraction (XRD) analysis shows crystalline calcite particles confirmed by FTIR spectra. pH and Ca2+ measurements during CaCO3 crystallization utilizing the Kitano and a constant-pH approach show a defined nucleation period of CaCO3 particles. The measurements allow for the calculation of the supersaturation time development, and the kinetic data can be combined with time-dependent light microscopy. The presence of c-PANIs delays the time of nucleation indicative of calcite nucleation inhibition. Microscopy illustrates the morphologies of CaCO3 crystals at all crystallization stages, from homogeneous spherical amorphous CaCO3 (ACC) particles corresponding to the first steps of crystallization to transition stage calcite crystals also involving a dissolution-recrystallization process in a late stage of crystallization. The data show that it is not possible to conclude the crystallization mechanism even for a very simple additive controlled crystallization process without time-resolved microscopic data supplemented by the analysis of the species present in the solution. Finally, fluorescence analysis indicates that conducting polymer derivatives can be incorporated into precipitated calcite particles. This gives rise to CaCO3 particles with novel and interesting optical properties.     

卵磷脂-水有序结构对CaCO3晶型的影响

Influence of the concentration of phosphatidylcholine (PC) in the solution of 0.5mol?L-1 CaCl2 on the crystal structure of CaCO3 has been studied by means of X-ray diffraction method. When the concentration of PC is below its CMC, the calcite CaCO3 is formed. It advantageous that CaCl2 reacts with Na2CO3 so as to form vaterite CaCO3 in the lipesome composed of PC more than in the water. The arnount of vaterite CaCO3 formed is increased with increase of concentration of PC. But if the concentration of PC is so increased as to form liquid crystal, then the amount of vaterite decreases obviously. The reason for the difference of crystal type formed has been discussed in the paper.     

胆固醇(Cholesterol)嵌入卵磷脂(PC)有序体后对其中CaCO3晶型结构的影响

在PC和Chol/PC有序体中进行CaCO₃沉淀反应,用X射线衍射和扫描电镜方法表征了反应物结构,研究了作为有机模板剂的不同分子有序体对CaCO₃的晶型和形态的指导作用.在反胶束合成中出纳米级CaCO₃颗粒.胆固醇对有序体有显著影响,进而影响此体系中形成的CaCO₃晶型,可诱导生成3种CaCO₃异构体:胶体CaCO₃、球霰石和方解石.方解石含量随胆固醇含量增加减少.