制备条件对Au/TiO2催化CO氧化性能的影响

采用沉积沉淀法和化学沉积法，分别制备了Au/TiO2催化剂，比较详尽地探讨了制备方法及制备条件对其催化CO氧化性能的影响，并对催化剂进行XRD表征，优化了制备条件，结果显示，控制沉积－沉淀反应液的pH值范围为6．5－7．0，浓度为40mL水／g载体，温度70℃，还原温度85℃,时间60min，以沉积－沉淀法制备的3％Au/TiO2催化剂可于－35℃将CO完全转化，经还原预处理比经焙烧得到的催化剂的活性更高，用光化学沉积法制备的Au/TiO2催化剂的活性欠佳。     

制备参数对Au／Fe2O3催化剂水煤气变换性能的影响

 采用共沉淀法制备了Au／Fe2O3催化剂，并系统地考察了制备参数对其催化WGS性能的影响．通过BET，XRD，XRF，H2－TPR和HRTEM等表征手段，初步考察了Au／Fe2O3催化剂具有高催化活性的原因．结果表明，金负载量、沉淀剂种类、沉淀方式、沉淀pH值、焙烧气氛和焙烧温度对Au／Fe2O3催化剂的催化性能均具有较大的影响．Au／Fe2O3催化剂的低温高活性是纳米Au与Fe3O4协同作用的结果；Au／Fe2O3催化剂的高温活性是由于活性相Fe3O4起主要作用的结果．纳米Au粒子的烧结会降低其催化活性．     

钴氧化物负载的纳米金催化剂的制备及其性能研究

采用共沉淀法和金属有机配合物固载法，分别制备了钴氧化物负载的纳米金催化剂．考察了该催化剂对CO低温氧化反应的催化活性及其制备方法和制备条件，如焙烧温度和时间、金的负载量、活性组分前体、沉淀剂的滴加顺序等因素对催化性能的影响．结果表明：严格控制制备条件．上述两种方法制备的3％Au／Co3O4催化剂，对CO氧化反应都具有很高的催化活性，可分别于-22℃和-5℃将空气中1％的CO完全转化为CO2．：XRD和TEM测试结果显示．催化剂上的金颗粒大小在10nm范围内，载体为适度结晶的四氧化三钴．     

丙烯环氧化反应用Au／TiO2系列催化剂的制备与表征

 用沉积－沉淀法制备了Au／TiO2系列催化剂，并用XRD，TG－DTA，BET，TEM和IR等技术对催化剂的物相、组成和表面结构进行了表征，利用微反对催化剂在丙烯环氧化反应中的活性进行了评价．结果表明，Au／TiO2催化剂的比表面积在100m2／g以上，Au粒子以纳米级超细颗粒均匀分散在锐钛矿型TiO2的表面．催化剂表面的活性相是Lewis酸位Tin＋与Au粒子，Au可以吸附氢与氧并将其转化为过氧化物．在50～150℃温度范围内，丙烯的转化率为0．56％～1．16％，环氧丙烷的选择性在87％以上．原料气中H2或O2的含量增大时，丙烯的转化率随之升高．在催化剂中引入碱金属或碱土金属的硝酸盐作为助剂，可以不同程度地提高催化剂的活性．     

微乳法制备Au/Al2 O3 催化剂及其催化氧化CO性能的研究

用Tx-100／正己醇／环己烷／水的W／O微乳体系,合成了一系列Au／Al2O3催化剂。考察了焙烧温度、沉淀剂种类、搅拌方式等对Au／Al2O3,催化氧化CO活性的影响。结果表明：以氨水为沉淀剂,机械搅拌,600℃焙烧制得的Au／Al2O3,显示出较好的CO氧化性能。当反应温度为100℃时,CO转化率达85．0％,240℃时转化率达96．0％。XRD,DTA,TPR和TEM等表征表明：低温焙烧的催化剂,大部分载体Al2O3为无定型,对催化活性不利;焙烧温度过高,可能造成金微粒的团聚烧结,使其活性下降;由较强烈的搅拌方式制得的Au／Al2O3经适宜温度焙烧,可获得金粒尺寸较小、CO催化氧化活性较高的Au／γ-Al2O3催化剂。     

在溶胶-凝胶法制备的MoO3/SiO2催化丙烯的环氧化反应

 以sol－gel法制备了MoO3／SiO2催化剂，并用BET比表面积测定，XRD和FT－IR等手段对催化剂进行了表征；研究了以过氧化氢异丙苯为氧化剂的丙烯一步环氧化反应，考察了催化剂的制备条件和反应条件对丙烯环氧化反应的影响．结果表明，在制备过程中，酸性水解剂对MoO3／SiO2催化剂的分散度、比表面积和催化性能有较大的影响．用HCl溶液作为水解剂制备的催化剂，其性能明显优于用HNO3或HAc作水解剂制备的催化剂．在110℃和0．6MPa的条件下反应2h，过氧化氢异丙苯转化率为89％，环氧丙烷选择性为80％．     

丙烯气相一步氧化制环氧丙烷用Ag-Mo催化剂的研究

 用浸渍法和溶胶－凝胶法制备了一系列以银及氧化钼为活性组分，负载于不同载体上的催化剂．在以分子氧为氧化剂，且原料气中不添加任何抑制剂的情况下，采用微反－色谱联合装置考察了催化剂对丙烯气相一步氧化制环氧丙烷的催化性能．结果表明，载体和助剂对催化剂上丙烯环氧化性能产生明显的影响．以TiO2－ZrO2为载体，CsNO3－NaCl为助剂的Ag－MoO3催化剂具有较好的催化性能，在400℃下，氧的转化率和环氧丙烷的选择性可分别达到11．3％和34．8％；在450℃下，氧的转化率和环氧丙烷的选择性可分别提高到33．0％和35．3％．采用溶胶－凝胶法制备的MoO3／SiO2催化剂对丙烯气相一步环氧化反应也具有一定的催化活性．     

负载型介孔Au/NiO催化剂的制备、表征与光谱特性研究

采用还原法和沉积-沉淀法制备了介孔Au/NiO催化剂,并运用XRD、N2吸附-脱附、UV-Vis、FTIR、和XPS等方法对其进行了表征,考察了制备方法对Au/NiO催化剂物理化学性质和丙烷氧化脱氢制丙烯反应催化性能的影响.实验结果表明Au/NiO催化剂具有一定的低温催化活性,而还原法制备的催化剂催化性能好于沉积-沉淀法制备的催化剂,反应温度350℃时,还原法制备的Au/NiO催化剂的丙烷转化率和丙烯选择性分别达到25.1%和39.8%.制备方法对表面Au的价态分布、颗粒大小及分散度均有影响.催化剂表面Auδ+物种是催化剂的主要活性组分.     

植物还原法制备负载型金纳米催化剂催化乙醇选择氧化反应

采用侧柏叶提取液还原氯金酸制备负载型金纳米催化剂,通过乙醇选择氧化反应,筛选出催化性能较好的TiO2载体。以TiO2载体为载体,考察了Au负载量、焙烧温度、催化剂用量、碳酸氢钠添加量及催化剂反应条件(时间、温度、压力)等因素对乙醇选择氧化反应的影响。结果表明,1.5%Au/TiO2催化剂(Au负载量为1.5%,质量分率,下同)催化乙醇选择氧化反应性能最佳,产物为乙醛、乙酸乙酯和缩醛,0.5%碳酸氢钠添加剂可抑制缩醛的生成,并可显著提高乙醇转化率和乙酸乙酯选择性。通过优化催化反应条件(1.5%Au/TiO2催化剂焙烧温度为400℃、用量为0.4 g、反应温度为100℃、氧气压力为3 MPa、反应时间为3 h时),乙醇转化率为47.9%,乙酸乙酯选择性为89.1%。     

过氧化氢异丙苯催化氧化丙烯制环氧丙烷

研究了以钼－醇配合物为催化剂,过氧化氢异丙苯为环氧化剂,乙醇为溶剂的丙烯一步氧化制环氧丙烷的反应,结果表明,用不同的二醇和不同醇／钼比制备的钼醇催化剂具有不同的催化性能和配性,用乙二醇和丙二醇制备的催化剂,催化性能优于丁二醇制备的催化剂,考察了反应条件（温度、压力和时间）对环氧化反应活性的影响,在１００℃,０．５ＭＰａ的条件下反应２ｈ,过氧化氢异丙苯的转化率为６５．０％,环氧丙烷的选择性为７０．４     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.