Cu2ZnSnS4纳米晶微球的制备及其表征

以乙二醇为溶剂,采用溶剂热法合成出由纳米晶组装而成的Cu2ZnSnS4(CZTS)微球。采用X射线衍射仪(XRD)、拉曼光谱仪(Raman)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(DRS)对所得微球的结构与成分、颗粒大小与形貌和光学性质进行了测试分析。研究结果表明:溶剂热法制得的CZTS粉体具有四方晶相结构,微球由纳米晶组装而成,对可见光有良好的吸收;随着反应时间的增加,颗粒尺寸逐渐增大,且对形貌有一定影响;此外,文中还对CZTS微球的形成机理做了推测。     

TiO2纳米片/巢状分级结构纳米阵列薄膜的制备及其在染料敏化太阳能电池中的应用

采用水热合成法在氟掺杂二氧化锡(FTO)导电玻璃基底上得到TiO2纳米阵列薄膜,并进一步通过NaOH溶液水热处理制备了由巢状纳米阵列及纳米片覆盖层构成的TiO2纳米阵列分级结构一体化薄膜.采用场发射扫描电镜(FE-SEM),X射线衍射(XRD),紫外-可见(UV-Vis)漫反射光谱和吸收光谱技术对TiO2薄膜的结构和性质进行表征.FE-SEM结果表明:分级结构TiO2薄膜膜厚为1.5μm,薄膜由一层纳米片覆盖层(约0.2μm高)和一层巢状纳米阵列层(约1.3μm高)组成.XRD谱图表明TiO2薄膜为锐钛矿相.UV-Vis光谱显示分级结构TiO2薄膜具有较强的光捕获能力和染料吸附能力.TiO2纳米片/巢状分级结构纳米阵列薄膜作为光阳极,可有效地提高染料敏化太阳能电池的光电转换效率,其短路电流(Jsc)为7.79mA·cm-2,开路电压(Voc)为0.80V,填充因子(FF)为0.40,光电转换效率(η)为2.48%,其光电转换效率较TiO2纳米阵列薄膜提高了近10倍.     

Sn掺杂ZnO纳米针的结构及其生长机制(英文)

利用包括磁控溅射和热氧化的两步法在Si(111)衬底上制备了Sn掺杂ZnO纳米针.首先用磁控溅射法在Si(111)衬底上制备Sn:Zn薄膜,然后在650℃的Ar气氛中对薄膜进行热氧化,制备出Sn掺杂ZnO纳米针.样品的结构、成分和光学性质采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)、能量散射X射线(EDX)谱和光致发光(PL)光谱等技术手段进行分析.结果表明,制备的样品为具有六方纤锌矿结构的单晶Sn掺杂ZnO纳米针,Sn掺杂量为2.5%(x,原子比),底部和头部直径分别为200-500 nm和40 nm,长度为1-3μm,结晶质量较高.室温光致发光光谱显示紫外发光峰比纯ZnO的发光峰稍有蓝移,这可归因于能谱分析中探测到的Sn的影响.基于本实验的实际条件,简单探讨了Sn掺杂ZnO纳米针的生长机制.     

原位水热合成SrTiO3/TiO2复合纳米纤维及光催化性能

以利用静电纺丝技术制备的TiO2纳米纤维为模板和反应物,原位水热合成了具有异质结构的SrTiO3/TiO2复合纳米纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、能量散射光谱(EDS)、高分辨透射电子显微镜( HRTEM)和X射线光电子能谱(XPS)等测试手段对样品的结构和形貌进行了表征.用罗丹明B(RB)模...     

氟化铋薄膜的电化学原位合成及光催化活性

采用常温电化学原位法合成了Bi F3薄膜,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)及密度泛函理论(DFT)对薄膜的晶型、形貌、光学性质和能带结构进行了表征;以罗丹明B(Rh B)为目标降解物,考察了薄膜的光催化活性和稳定性.结果表明,Bi F3薄膜具有纳米片状结构、较高的结晶纯度、良好的光催化活性和稳定性,其导带底和价带顶分别主要由Bi6p和F2p轨道电子贡献.随着电解质浓度的增加,Bi F3薄膜的结构、形貌发生变化,使光催化活性先升高后降低,在电解质NH4F浓度(质量分数)为1.5%时,Bi F3薄膜的纳米薄片之间呈现出明显的交错分布,而此类结构排列有利于反应物的传输和光的反射,从而增大催化剂的反应空间和提高光的利用率,表现出最佳的光催化活性.Bi F3薄膜在模拟太阳光照射5 h后对Rh B降解率为99.1%,且重复使用4次,仍维持在81%以上.本文还提出了电化学Bi板上原位生长Bi F3薄膜的机制.     

溶剂热合成单分散硫化镉纳米晶

在双表面活性剂十八胺和油酸存在条件下, 以氯化镉和硫粉作为反应前驱物, 通过简单的溶剂热方法合成单分散性闪锌矿硫化镉纳米晶, 粒径大小在13 nm. 用X射线衍射(XRD)、透射电子显微镜(TEM)对产物的结构和形貌进行了表征, 同时对硫化镉纳米晶的紫外吸收谱和光致发光谱(PL)性能进行了表征. 实验结果表明合成的样品具有很好的发光性能, 此外溶剂热反应的温度对纳米晶的单分散性有重要影响. 并对硫化镉纳米晶的形成机理做了初步的研究.     

TiO2纳米管阵列负载不同形貌Cu2O薄膜的制备及光电性能研究

本论文采用阳极氧化法在金属钛基底上制备高度有序的TiO2纳米管阵列薄膜,然后采用脉冲电流法在TiO2纳米管阵列上沉积Cu2O,从而制备出Cu2O-TiO2纳米管阵列异质结复合薄膜。借助X射线衍射仪(XRD),场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)等表征手段,详细探讨了Cu2O沉积过程中电解液的不同扰动方式(静止、磁力搅拌和超声搅拌)对复合薄膜物相和形貌的影响。实验结果表明电解液的扰动方式会影响Cu2O沉积过程中的离子扩散和微区化学环境,从而影响Cu2O的形貌。通过漫反射紫外-可见吸收光谱(UV-Vis)和光电流性能测试可知所制备的负载Cu2O型TiO2纳米管阵列薄膜具有显著的可见光响应效应。     

化学沉淀法用于多种形貌ZnS纳米晶的可控合成

以辛基酚聚氧乙烯醚(OP-10)为表面活性剂, 二甲基甲酰胺(DMF)/水为溶剂, 用沉淀法制备了纳米球、纳米棒、纳米片等多种形貌可控的ZnS纳米晶, 并且用透射电子显微镜、X射线衍射、紫外吸收、荧光光谱对其进行了表征, 并且分析了其形貌转变机理.     

甲苯-乙二醇两相界面反应合成CdS纳米粒子

以十八胺为表面修饰剂,硬脂酸镉和硫脲为前驱物,在甲苯-乙二醇两相界面处合成了CdS纳米粒子.研究了反应时间、前驱物浓度、前驱物和表面修饰剂摩尔比等因素对合成CdS纳米粒子的影响.采用紫外-可见吸收光谱、荧光光谱、透射电子显微镜(TEM)和广角X射线衍射(WAXD)等方法对CdS纳米粒子的光学性质、形貌及晶体结构进行了表...     

SBA-15模板法合成硫化锌纳米束及其光电性能

以乙基黄酸锌(ZnR2)作为单分子前驱体, SBA-15作为模板, 合成高度有序的ZnS纳米束, 并通过透射电子显微镜(TEM)、热重-差热分析(TG-DTA)、X射线衍射(XRD)、N2吸附-脱附、紫外-可见(UV-Vis)光谱、荧光光谱和扫描电子显微镜(SEM)等一系列手段对其形貌、结构及性能进行表征. 结果表明, 此阵列具有高度有序的六方介孔结构, 同时具有类似于母模板的纤维状形貌. 采用一种简单的交流电场辅助的方法把纳米束组装到电极上, 然后通过半导体表征仪器进行测试, 表征结果发现单束ZnS纳米束呈现出非线性的整流行为, 在紫外光照射下, 其电流-电压(I-V)曲线发生了很大的变化, 说明利用它们组装的纳米器件具有良好的光开关效应,并对整流及光响应机理进行了解释.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。