Size-dependent morphology of dealloyed bimetallic catalysts: linking the nano to the macro scale

Chemical dealloying of Pt binary alloy precursors has emerged as a novel and important preparation process for highly active fuel cell catalysts. Dealloying is a selective (electro)chemical leaching of a less noble metal M from a M rich Pt alloy precursor material and has been a familiar subject of macroscale corrosion technology for decades. The atomic processes occurring during the dealloying of nanoscale materials, however, are virtually unexplored and hence poorly understood. Here, we have investigated how the morphology and intraparticle composition depend on the particle size of dealloyed Pt-Co and Pt-Cu alloy nanoparticle precursor catalysts. To examine the size-morphology-composition relation, we used a combination of high-resolutionscanning transmission electron microscopy (STEM), transmission electron microscopy (TEM), electron energy loss (EEL) spectroscopy, energy-dispersive X-ray spectroscopy (EDS), and surface-sensitive cycling voltammetry. Our results indicate the existence of three distinctly different size-dependent morphology regimes in dealloyed Pt-Co and Pt-Cu particle ensembles: (i) The arrangement of Pt shell surrounding a single alloy core ("single core-shell nanoparticles") is exclusively formed by dealloying of particles below a characteristic diameter d(multiple cores) of 10-15 nm. (ii) Above d(multiple cores), nonporous bimetallic core-shell particles dominate and show structures with irregular shaped multiple Co/Cu rich cores ("multiple cores-shell nanoparticles"). (iii) Above the second characteristic diameter d(pores) of about 30 nm, the dealloyed Pt-Co and Pt-Cu particles start to show surface pits and nanoscale pores next to multiple Co/Cu rich cores. This structure prevails up to macroscopic bulklike dealloyed particles with diameter of more than 100 nm. The size-morphology-composition relationships link the nano to the macro scale and provide an insight into the existing material gap of dealloyed nanoparticles and highly porous bulklike bimetallic particles in corrosion science.     

Preparation, characterization and catalytic behavior of Pt-Cu nanoparticles in methane combustion

Fine and well dispersed Pt-Cu bimetallic nanoparticles stabilized by polyvinyl pyrrolidone (PVP) were synthesized by alkaline polyol method. The molar ratio of Pt to Cu was 1 : 1. Further, the Pt-Cu bimetallic nanoparticles were supported on alumina and their catalytic behavior in methane combustion was investigated. The as-prepared as well as the supported Pt-Cu nanoparticles were characterized by transmission elec-tron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), fractal analysis and X-ray diffraction (XRD). The dependence of methane combustion on the morphology and surface composition of Pt-Cu nanoparticles was analyzed based on the experimental results.     

Chemical Dealloying Mechanism of Bimetallic Pt–Co Nanoparticles and Enhancement of Catalytic Activity toward Oxygen Reduction

The chemical dealloying mechanism of bimetallic Pt–Co nanoparticles (NPs) and enhancement of their electrocatalytic activity towards the oxygen reduction reaction (ORR) have been investigated on a fundamental level by the combination of X‐ray absorption spectroscopy (XAS) and aberration‐corrected scanning transmission electron microscopy (STEM). Structural parameters, such as coordination numbers, alloy extent, and the unfilled d states of Pt atoms, are derived from the XAS spectra, together with the compositional variation analyzed by line‐scanning energy‐dispersive X‐ray spectroscopy (EDX) on an atomic scale, to gain new insights into the dealloying process of bimetallic Pt–Co NPs. The XAS results on acid‐treated Pt–Co/C NPs reveal that the Co–Co bonding in the bimetallic NPs dissolves first and the remaining morphology gradually transforms to a Pt‐skin structure. From cyclic voltammetry and mass activity measurements, Pt–Co alloy NPs with a Pt‐skin structure significantly enhance the catalytic performance towards the ORR. Further, it is observed that such an imperfect Pt‐skin surface feature will collapse due to the penetration of electrolyte into layers underneath and cause further dissolution of Co and the loss of Pt. The electrocatalytic activity decreases accordingly, if the dealloying process lasts for 4 h. The findings not only demonstrate the importance of appropriate treatment of bimetallic catalysts, but also can be referred to other Pt bimetallic alloys with transition metals.     

Pt-表层限域的表面FeOx结构用于低温CO氧化反应

通过简单的浸渍-还原并随后在酸性溶液中处理制备了Pt-Cu双金属催化剂. 利用电感耦合等离子体发射光谱、X射线衍射和X射线光电子能谱对不同处理条件下的Pt-Cu纳米粒子的结构和组成进行了表征. 研究发现, Pt-Cu催化剂在高温H₂中还原形成了PtCu₃合金结构, 酸洗处理后形成了包含Pt-骨架(Pt-skeleton)的表面结构和PtCu₃合金核的纳米粒子. 而Pt-骨架结构又可通过在H₂中退火转变为规整的Pt-表层(Pt-skin)结构. Pt-表层表面修饰Fe氧化物后在CO选择氧化反应中表现出较好的催化性能. 通过此方法制备的三金属Pt-Cu-Fe催化剂可达到与Pt-Fe相近的高活性, 并且催化剂中Pt的用量大大降低.     

Ru-decorated Pt surfaces as model fuel cell electrocatalysts for CO electrooxidation

This feature article concerns Pt surfaces modified (decorated) by ruthenium as model fuel cell electrocatalysts for electrooxidation processes. This work reveals the role of ruthenium promoters in enhancing electrocatalytic activity toward organic fuels for fuel cells, and it particularly concerns the methanol decomposition product, surface CO. A special focus is on surface mobility of the CO as it is catalytically oxidized to CO(2). Different methods used to prepare Ru-decorated Pt single crystal surfaces as well as Ru-decorated Pt nanoparticles are reviewed, and the methods of characterization and testing of their activity are discussed. The focus is on the origin of peak splitting involved in the voltammetric electrooxidation of CO on Ru-decorated Pt surfaces, and on the interpretative consequences of the splitting for single crystal and nanoparticle Pt/Ru bimetallic surfaces. Apparently, screening through the literature allows formulating several models of the CO stripping reaction, and the validity of these models is discussed. Major efforts are made in this article to compare the results reported by the Urbana-Champaign group and the Munich group, but also by other groups. As electrocatalysis is progressively more and more driven by theory, our review of the experimental findings may serve to summarize the state of the art and clarify the roads ahead. Future studies will deal with highly dispersed and reactive nanoscale surfaces and other more advanced catalytic materials for fuel cell catalysis and related energy applications. It is expected that the metal/metal and metal/substrate interactions will be increasingly investigated on atomic and electronic levels, with likewise increasing participation of theory, and the structure and reactivity of various monolayer catalytic systems involving more than two metals (that is ternary and quaternary systems) will be interrogated.     

Shape-dependent electrocatalysis: methanol and formic acid electrooxidation on preferentially oriented Pt nanoparticles

Reactivity towards methanol and formic acid electrooxidation on Pt nanoparticles with well characterised surfaces were studied and compared with the behaviour of single crystal electrodes with basal orientations. Polyoriented and preferential (100), (111) and (100)-(111) Pt nanoparticles were synthesised, cleaned preserving its surface structure, characterised and employed to evaluate the influence of the surface structure/shape of the Pt nanoparticles on these two relevant electrochemical reactions. The results pointed out that, in agreement with fundamental studies with Pt single crystal electrodes, the surface structure of the electrodes plays an important role on the reactivity of both oxidation processes, and thus the electrocatalytic properties strongly depend on the surface structure/shape of the nanoparticles, in particular on the presence of sites with (111) symmetry. These findings open the possibility of designing new and better electrocatalytic materials using decorated shape-controlled Pt nanoparticles as previously described with Pt single crystal electrodes.     

Pd/Pt二元合金电极的制备及氧还原性能

本文利用欠电位沉积亚单层的Cu及Pt置换取代Cu的方法, 制备了具有不同表面元素组成的Pd/Pt二元合金电极(用Pd/Ptx表示, x指欠电位沉积Cu-Pt置换取代Cu过程的次数),并对其表面元素组成、氧还原性能进行了表征. 在控制欠电位沉积Cu的下限电位恒定(0.34 V)的前提下, 表面Pt/Pd的元素组成比通过重复欠电位沉积Cu及Pt置换取代Cu的次数(1~5次)来可控地调变. 光电子能谱(XPS) 以及红外光谱实验表明,Pd/Ptx电极表层区的Pt：Pd元素组成比随着Pt沉积次数增加而增加, 对Pd/Pt4电极, 在电极表层区约2~3 nm内的Pt/Pd的原子比大约是1:4,而最表层裸露Pd原子的比例仍在20%以上。循环伏安结果显示, 随着Pt沉积次数的增加(1-5次), Pd/Ptx电极表面越不易被氧化。氧还原测试结果显示随着Pt沉积次数的增加(1~4次), Pd/Ptx二元金属电极的氧还原活性依次增加, 经过第3次沉积后其氧还原活性已优于纯Pt,而经4次以上沉积,其氧还原活性基本不变。在其它反应条件相同条件的前提下, Pd/Pt4电极上氧还原的半波电位与纯Pt相比右移约25 mV。结合本文与文献的实验结果,我们初步认为Pd/Ptx二元金属体系氧还原性能改善主要源自表层Pd原子导致其邻近的Pt原子上含氧物种吸附能的降低.     

Supported Pd-Cu bimetallic nanoparticles that have high activity for the electrochemical oxidation of methanol

Monodisperse bimetallic Pd-Cu nanoparticles with controllable size and composition were synthesized by a one-step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd(85)-Cu(15), Pd(56)-Cu(44), and Pd(39)-Cu(61). The nanoparticles were separated from the solution mixture by extraction with non-polar solvents, such as n-hexane. Monodisperse bimetallic Pd-Cu nanoparticles with narrow size-distribution were obtained without the need for a size-selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as-prepared nanoparticles were loaded onto a Vulcan XC-72 carbon support. Supported bimetallic Pd-Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd-Cu catalyst that contained 15?% Cu, the activity was even comparable to the state-of-the-art commercially available Pt/C catalysts. A STEM-HAADF study indicated that the formation of random solid-solution alloy structures in the bimetallic Pd(85)-Cu(15)/C catalysts played a key role in improving the electrochemical activity.     

Butylphenyl-functionalized Pt nanoparticles as CO-resistant electrocatalysts for formic acid oxidation

Butylphenyl-functionalized Pt nanoparticles (Pt-BP) with an average core diameter of 2.93 ± 0.49 nm were synthesized by the co-reduction of butylphenyl diazonium salt and H(2)PtCl(4). Cyclic voltammetric studies of the Pt-BP nanoparticles showed a much less pronounced hysteresis between the oxidation currents of formic acid in the forward and reverse scans, as compared to that on naked Pt surfaces. Electrochemical in situ FTIR studies confirmed that no adsorbed CO, a poisoning intermediate, was generated on the Pt-BP nanoparticle surface. These results suggest that functionalization of the Pt nanoparticles by butylphenyl fragments effectively blocked the CO poisoning pathway, most probably through third-body effects, and hence led to an apparent improvement of the electrocatalytic activity in formic acid oxidation.     

高指数晶面和梯度组成的PtCu3@Pt3Cu@Pt纳米枝晶氧还原电催化剂性能

燃料电池作为一种清洁、高效的能量转换装置,其大规模应用受到阴极氧还原反应(ORR)动力学缓慢以及铂资源稀缺和价格高昂等的极大制约.尽管研究人员在过去几十年中付出了巨大努力,但研制高效、耐用的低Pt合金催化剂仍亟待突破.近年的研究表明,Pt的一些高指数晶面能够表现出比Pt(111)晶面更高的ORR活性,尤其是Pt(332),Pt(331)和Pt(554)等.同时,合金化能够通过电子与几何效应减弱含氧物种在Pt表面的吸附能,提升Pt合金催化剂的ORR活性.因此,高指数晶面和合金化的结合将是设计开发高性能电催化剂的有效手段.本文提出一种气氛调控的液相合成方法,通过在油胺中加热还原Pt化合物和Cu化合物,不添加其它保护剂,仅通过反应气氛的调控,成功制备了不同形貌的Pt-Cu合金纳米结构(纳米多脚、纳米凹立方体、纳米枝晶).通过反应前期引入氧化性气氛随后切换为惰性气氛的调控策略,合成具有高指数晶面的具有纳米枝晶结构的PtCu3合金;进一步对其进行电化学去合金化形成富Pt壳层,既保持其纳米枝晶形貌和高指数晶面,又形成具有梯度组成的PtCu₃@Pt₃Cu@Pt纳米枝晶.相比而言,全程惰性气氛下生长得到纳米多脚结构,全程氧化性气氛下生长则得到纳米凹立方体.电化学测试结果表明,在0.1 M HClO4电解液中,PtCu₃@Pt₃Cu@Pt纳米枝晶展现出较高的ORR活性,在0.9 V(vs.RHE)处的Pt质量活性和面积活性高达1.55 A mgPt^-1和2.4 mA cmPt^-2,分别为商业Pt/C催化剂的14倍和24倍;此外,PtCu₃@Pt₃Cu@Pt纳米枝晶具有良好的电化学稳定性能,经0.7~1.1 V(vs.RHE)电势范围内循环5000圈,其催化活性保持稳定.DFT计算表明,Cu合金效应和高指数晶面结构共同增强了Pt的ORR活性,其中PtCu₃@Pt₃Cu@Pt纳米枝晶高指数晶面台阶位点的氧结合能接近最优值,从而表现出火山顶点附近的ORR活性.     

Tuning supported catalyst reactivity with dendrimer-templated Pt-Cu nanoparticles

The effects of particle composition on heterogeneous catalysis were studied using dendrimer-encapsulated nanoparticles (DENs) as precursors to supported Pt-Cu catalysts. Bimetallic Pt-Cu DENs with varying Pt/Cu ratios were prepared in an anaerobic aqueous solution and deposited onto a high-purity commercial alumina support. The dendrimer template was then thermally removed to yield supported nanoparticle catalysts, which were studied with toluene hydrogenation and CO oxidation catalysis as well as infrared spectroscopy of adsorbed CO. Incorporating Cu into Pt nanoparticles had opposite effects on the two test reactions. Cu acted as a mild promoter for CO oxidation catalysis, and the promoting effect was independent of the amount of Cu present. Conversely, Cu acted as a strong poison for toluene hydrogenation catalysis, and the normalized rate tracked inversely with Cu content. Infrared spectroscopy of the supported nanoparticles indicated that electronic effects (electron donation from Cu to Pt) were minimal for these materials. Consequently, the catalysis results are interpreted in terms of potential structural differences as a function of Cu incorporation and reaction conditions.     

Electrochemical Sensor for Oxidation of NO Based on Au-Pt Nanoparticles Self-assembly Film

Au-Pt bimetallic nanoparticles film used as an efficient electrochemical sensor was prepared by self-assembled Au-Pt bimetallic nanoparticles on a glassy carbon (GC) substrate using thioglycolic acid as a linker. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that the Au-Pt nanoparticles self-assembly film was dense and uniform. Electrochemical experiments revealed that Au-Pt bimetallic nanoparticles film/GC electrode showed high electrocatalytic activity to the oxidation of nitric oxide.     

电化学去合金化Pt(Pd)-Cu对氧的电催化还原活性的研究

应用电化学去合金法制备了表面覆盖有Pt(Pd)原子层的Pt(Pd)-Cu合金催化剂.研究该催化剂在0.1mol.L-1HClO4酸性溶液中对氧气电化学还原的催化活性,并采用同步辐射反常X-射线衍射法(Anomalous X-ray Diffraction,AXRD)和表面X-射线散射法(Surface X-ray Scattering,SXS)从原子尺度研究了去合金化后催化剂的结构.分析对比纳米颗粒、薄膜和单晶3种不同形式的去合金化Pt-Cu的结构和催化活性以及Pt-Cu和Pd-Cu两种不同合金薄膜的结构和催化活性.结果表明,表面应力是影响催化剂催化活性的关键因素,而应力大小则与去合金化后所形成的表面Pt(Pd)层的厚度相关,材料尺寸和组成元素等都影响表面Pt(Pd)层的厚度.提出可利用调控材料表面的应力来设计高催化活性的催化剂.     

Characterization of carbon-supported AuPt nanoparticles for electrocatalytic methanol oxidation reaction

In view of the recent finding that the bimetallic AuPt nanoparticles prepared by molecular-capping-based colloidal synthesis and subsequent assembly on carbon black support and thermal activation treatment exhibit alloy properties, which is in sharp contrast to the bimetallic miscibility gap known for the bulk counterparts in a wide composition range, there is a clear need to assess the electrocatalytic properties of the catalysts prepared with different bimetallic composition and different thermal treatment temperatures. This paper reports recent results of such an investigation of the electrocatalytic methanol oxidation reaction (MOR) activities of the carbon-supported AuPt nanoparticle catalysts with different bimetallic composition and thermal treatment temperatures. Au(m)Pt(100)(-)(m) nanoparticles of 2-3 nm core sizes with different atomic compositions ranging from 10% to 90% Au (m = 10 approximately 90) have been synthesized by controlling the feeding of the metal precursors used in the synthesis. The electrocatalytic MOR activities of the carbon-supported AuPt bimetallic catalysts were characterized in alkaline electrolytes. The catalysts with 65% to 85% Au and treated at 500 degrees C were found to exhibit maximum electrocatalytic activities in the alkaline electrolytes. The findings, together with a comparison with some well-documented catalysts as well as recent experimental and theoretical modeling results, have revealed important insights into the participation of CO(ad) and OH(ad) on Au sites in the catalytic reaction of Pt in the AuPt alloys with approximately 75% Au. The insights are useful for understanding the correlation of the bifunctional electrocatalytic activity of the bimetallic nanoparticle catalysts with the bimetallic composition and the thermal treatment temperatures.     

氢原子在Pt及Pt系双金属催化表面吸附的密度泛函理论研究

采用密度泛函理论(dFT)考察了Pt(100)、(110)、(111)三种表面氢原子的吸附行为, 计算了覆盖度为0.25 ML时氢原子在Pt 三种表面和M-Pt(111)双金属(M=Al, Fe, Co, Ni, Cu, Pd)上的最稳定吸附位、表面能以及吸附前后金属表面原子层间弛豫情况. 分析了氢原子在不同双金属表面吸附前后的局域态密度变化以及双金属表面d 带中心偏离费米能级的程度并与氢吸附能进行了关联. 计算结果表明, 在Pt(100), Pt(110)和Pt(111)表面, 氢原子的稳定吸附位分别为桥位、短桥位和fcc 穴位. 三种表面中以Pt(111)的表面能最低, 结构最稳定. 氢原子在不同M-Pt(111)双金属表面上的最稳定吸附位均为fcc 穴位, 其中在Ni-Pt 双金属表面的吸附能最低, Co-Pt 次之. 表明氢原子在Ni-Pt 和Co-Pt 双金属表面的吸附最稳定. 通过对氢原子在M-Pt(111)双金属表面吸附前后的局域态密度变化的分析, 验证了氢原子吸附能计算结果的准确性. 掺杂金属Ni、Co、Fe 的3d-Pt(111)双金属表面在吸附氢原子后发生弛豫, 第一层和第二层金属原子均不同程度地向外膨胀. 此外, 3d金属的掺入使得其对应的M-Pt(111)双金属表面d带中心与Pt 相比更靠近费米能级, 吸附氢原子能力增强, 表明3d-Pt系双金属表面有可能比Pt具有更好的脱氢活性.     

Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

高活性、可循环的Pt-Cu@3D石墨烯复合催化剂的制备和催化性能

A composite hydrogel consisting of well-dispersed Pt-Cu nanoparticles (NPs) supported on three-dimensional (3D) graphene (Pt-Cu@3DG) was successfully prepared by mild chemical reduction. The 3D interconnected macroporous structure of the graphene framework not only possesses large specific surface area that allows high metal loadings, but also facilitates mass transfer during the catalytic reaction. The Pt-Cu bimetallic alloy NPs show good catalytic activity compared with Pt NPs and reduce the content of Pt NPs used, thereby lowering costs. The morphology and composition of the Pt-Cu@3DG composite were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The catalysis studies indicate that the resulting composites can be used as an efficient, inexpensive, recyclable, and stable catalyst for the reduction of 4-nitrophenol to 4-aminophenol under mild conditions.     

Potential-assisted assembly of functionalised platinum nanoparticles on electrode surfaces

A method for assembling Pt nanoparticles (5 nm diameter) on indium tin oxide (ITO) and highly oriented pyrolytic graphite (HOPG) electrodes, via the potential-assisted deposition of pre-formed perthiolated-β-cyclodextrin-capped Pt nanoparticles is described. Cyclic voltammetry allowed control over the surface coverage of monodisperse Pt nanoparticles in a simple fashion, as evidenced by the voltammetric response and atomic force microscopy of the resulting electrode surface. The Pt nanoparticle arrays formed in this way were electrocatalytically active towards proton reduction-hydrogen evolution. The methodology described thus opens up a new approach for the deposition of metal nanoparticles with controlled surface density for the investigation of electrocatalytic processes.     

The state of metals in the Pt/Al2O3 and (Pt-Cu)/Al2O3 catalysts as indicated by IR spectroscopy with isotope dilution of 12C16O with 13C18O molecules

Adsorption of ¹³C¹⁸O+¹²C¹⁶O mixtures on the Pt(2.9%)/γ-Al₂O₃, (Pt(2.6%)+Cu(2.7%))/γ-Al₂O₃, and (Pt(2.6%)+Cu(5.1%))/γ-Al₂O₃ catalysts was studied by FTIR spectroscopy. On the metallic Pt surface at coverages close to saturation, CO is adsorbed both strongly and weakly to form linear species for which the vibrational frequencies of the isolated ¹³C¹⁸O molecules adsorbed on Pt are ∼1940 and ∼1970 cm⁻¹, respectively. The redistribution of intensities of the high-and low-frequency absorption bands in the spectra of adsorbed ¹³C¹⁸O indicates that these linear forms are present on the adjacent metal sites. The weak adsorption is responsible for the fast isotope exchange between the gaseous CO and CO molecules adsorbed on metal. The Pt-Cu alloys, in which the electronic state of the surface Pt atoms characteristic of monometallic Pt remains unchanged, are formed on the surface of the reduced Pt-Cu bimetallic catalysts. The decrease in the vibrational frequencies of the isolated C=O bonds in the isolated Pt-CO complexes suggests that the CO molecules adsorbed on the Cu atoms affect the electronic properties of Pt. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 831–836, May, 2007.     

乙醇在Pt/nanoTiO2-CNT复合催化剂上的电催化氧化

通过前驱体Ti(OEt)4直接水解和电化学扫描电沉积法制备在Ti基体上的纳米TiO2-碳纳米管复合膜载Pt(Pt/nanoTiO2-CNT)复合催化剂. 透射电镜 (TEM) 和X射线衍射 (XRD) 结果表明, 锐钛矿型纳米TiO2粒子和Pt纳米粒子(粒径均为5~10 nm)均匀地分散在碳纳米管表面. 通过循环伏安和计时电流法研究表明, Pt/nanoTiO2-CNT 复合催化剂(Pt载量为0.32 mg•cm−2) 具有高达51.8 m2•g−1的电化学活性比表面积, 常温常压下对乙醇的电化学氧化具有高催化活性和稳定性, 乙醇氧化峰电位分别为0.59、0.96和0.24 V, 氧化峰电流密度分别达到−115、−113和−75 mA•cm−2. 复合催化剂对乙醇电氧化的高催化活性可归因于nanoTiO2、CNT和Pt纳米粒子的协同催化作用.