Bi2Ti2O7/TiO2/Bi4Ti3O12多异质结的构筑及其增强的可见光催化性能

以静电纺丝技术制备的TiO₂纳米纤维为基质,硝酸铋为铋源,KOH为矿化剂,成功制备了多异质结Bi₂Ti₂O₇/TiO₂/Bi₄Ti₃O₁₂复合纳米纤维光催化剂。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)等一系列表征,对其物相组成、微观形貌和光学性质等进行分析。结果表明：TiO₂纳米纤维的介入,将Ⅰ型异质结Bi₂Ti₂O₇/Bi₄Ti₃O₁₂分离为2个Ⅱ型异质结Bi₂Ti₂O₇/TiO₂和Bi₄Ti₃O₁₂/TiO₂。Bi₂     

β-Bi2O3修饰Bi2WO6光催化降解苯酚及其可能机理

采用简单混合法制备了一系列Bi₂O₃/Bi₂WO₆复合光催化剂. 在紫外光降解水中苯酚的过程中, Bi₂O₃/Bi₂WO₆的光催化活性随Bi₂O₃含量的增加呈现先增大后减小的趋势. 当Bi₂O₃最佳负载量等于12.5% (质量分数, w)时, 该复合光催化剂的活性大约是单一Bi₂WO₆的4 倍. 固体样品表征表明, Bi₂O₃主要以β-Bi₂O₃存在, 复合光催化剂是Bi₂O₃和Bi₂WO₆的简单混合物. 此外, 在电催化氧化水的过程中, β-Bi₂O₃/Bi₂WO₆薄膜电极的光电流远大于β-Bi₂O₃和Bi₂WO₆薄膜电极的光电流之和. Bi₂O₃对Bi₂WO₆光催化的促进作用是由于前者接受后者的光生空穴, 提高Bi₂WO₆光生载流子的分离效率, 从而加快了O₂的还原和苯酚的降解.     

TiO2/Bi2O3纳米复合体的制备及可见光催化产氢性能

首先采用相分离的水解-溶剂热法制备了Bi₂O₃纳米粒子,然后利用简单的湿化学法在Bi₂O₃表面负载不同比例的TiO₂纳米颗粒,进而得到TiO₂/Bi₂O₃纳米复合体。通过气氛调控的表面光电压谱(SPS)等测试表明,表面负载适量的TiO₂后能够提高Bi₂O₃光生电荷分离。可见光催化产氢和降解污染物测试结果进一步证明,表面负载适量的TiO₂后可显著提高其可见光催化活性,其中Ti/Bi摩尔比为7%时具有最高的光催化活性。这主要归因于TiO₂具有较为合适的导带能级位置,可以接收Bi₂O₃在可见光激发下所产生的高能级电子,从而抑制光生电子-空穴对复合,并且维持了高能级电子较高的还原能力。     

微波液相法一步合成H3PW12O40/Bi2WO6光催化剂及其脱氮性能

采用微波液相法一步合成了固载型H₃PW₁₂O₄₀/Bi₂WO₆光催化剂. 通过紫外-可见漫反射光谱(UV-Vis)、 场发射扫描电子显微镜(SEM)、 表面积及孔隙度(BET)测定、 氨气程序升温脱附(NH₃-TPD)、 吡啶吸附红外光谱(Py-FTIR)和X射线衍射(XRD)对所合成催化剂的结构和性质进行了考察, 并以吡啶浓度为15 mg/g的模拟油对光催化剂的脱氮效果进行评价. 结果表明, 与传统浸渍固载法相比, 微波液相一步法不仅能高效合成H₃PW₁₂O₄₀/Bi₂WO₆光催化剂, 且所合成的催化剂能被低能量的光激发. 固载H₃PW₁₂O₄₀不但能提高Bi₂WO₆纳米颗粒的表面酸量, 还能通过改变Bi₂WO₆前驱液的酸强度来调控催化剂形貌. 在H₃PW₁₂O₄₀固载量为15%(质量分数), 微波功率为800 W, 反应时间为90 min条件下得到的H₃PW₁₂O₄₀/Bi₂WO₆的光催化脱氮活性最高, 在催化剂与模拟油质量比为1/300, 500 W氙灯光照60 min的最佳光催化反应条件下, 模拟油脱氮率达到92.63%.     

沉淀法制备Bi2O3的晶相转变过程及其光催化性能

以硝酸铋为原料,氨水为沉淀剂,通过液相沉淀法制得前驱体Bi(OH)₃,并将Bi(OH)₃分别在不同温度和时间下焙烧。利用X射线衍射(XRD)、拉曼光谱、热重(TG)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)及紫外-可见漫反射光谱(UV-Vis DRS)详细研究了Bi(OH)₃转变为Bi₂O₃的过程及相变过程中粒子形貌、大小、光吸收性质等。结果表明,前驱体Bi(OH)₃经过焙烧之后,发生了如下的转变过程:Bi(OH)₃→Bi₅O₇NO₃→β-Bi₂O₃/Bi₅O₇NO₃→β-Bi₂O₃/Bi₅O₇NO₃/α-Bi₂O₃→α-Bi₂O₃,而且转变过程伴随着粒子长大。在上述转变过程中,与Bi₅O₇NO₃向β-Bi₂O₃转变的过程相比,从β-Bi₂O₃到α-Bi₂O₃相变过程更为迅速。此外,以光催化降解罗丹明B(RhB)为模型反应,考察了不同晶相的Bi₂O₃光催化活性,结果表明Bi₅O₇NO₃和β-Bi₂O₃材料具有优异的光催化性能,而α-Bi₂O₃具有较低的光催化活性。     

锌掺杂OV-β-Bi2O3可见光催化活性的提高:能带结构的调节和电荷分离的促进

采用溶胶-凝胶-原位碳热还原处理的方法,制备了一种含有氧空位(OV)的新型Zn掺杂β-Bi₂O₃纳米材料(OV-Zn∶Bi₂O₃),氧空位的浓度可以通过改变Zn²⁺的掺杂量进行调节。作为参照,只有氧空位没有Zn²⁺的新型β-Bi₂O₃(OV-β-Bi₂O₃)也通过类似的方法制得。通过紫外可见漫反射光谱、X射线光电子能谱、电子顺磁共振、光致发光光谱和光电化学测试,系统研究了氧空位和Zn²⁺掺杂对OV-Zn∶Bi₂O₃降解亚甲基蓝(MB)和2,4,6-三氯苯酚(2,4,6-TCP)可见光催化活性的综合影响。结果表明,氧空位的引入不仅可以使光吸收向长波方向拓展,而且可以促进光生载流子的分离。因此,与传统的β-Bi₂O₃相比,OV-β-Bi₂O₃对亚甲基蓝(MB)和2,4,6-三氯苯酚(2,4,6-TCP)的降解活性显著增强。对于OV-Zn∶Bi₂O₃催化剂,Zn²⁺掺杂可使光催化剂的价带边缘向下移动,增强了光激发空穴的氧化能力,并且适量的锌掺杂也能提高光生载流子的分离效率。因此,OV-Zn∶Bi₂O₃的可见光活性优于OV-β-Bi₂O₃,而且当Zn与Bi物质的量之比为0.3时,OV-Zn∶Bi₂O₃-0.3对MB和2,4,6-TCP的降解活性最高。     

纳米晶(CeO2)1-x(BiO1.5)x固溶体的水热合成与离子输运性质研究

在240℃水热体系中首次合成出系列纳米晶固溶体(CeO₂)_1-x(BiO_1.5)_x(x=0.0～0.50).产物采用X射线衍射,扫描电子显微镜和X射线光电子能谱仪进行表征.Bi₂O₃在CeO₂中的固溶限约为50%.所有固溶体结晶属立方萤石结构,粒度范围为10～18nm.当Bi₂O₃掺杂量小于固溶限时,于800℃烧结不会导致结构转变.而对于(CeO₂)_0.5(BiO_1.5)_0.5,于800℃在空气中烧结将导致固溶限降低.Bi₂O₃含量低于固溶限时,固溶体只具有体电导,而(CeO₂)_0.6(BiO_1.5)_0.4的总电导可分为体电导和晶界电导.体电导为氧离子,而晶界为来自电极的银离子.     

表面活性剂修饰碳酸氧铋的制备及光催化性能

采用水热法,以阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、非离子型表面活性剂聚乙二醇8000(PEG8000)、阴离子表面活性剂十二烷基硫酸钠(SDS)及SDS与CTAB耦合修饰Bi₂O₂CO₃。 系统地研究了表面活性剂种类及用量对Bi₂O₂CO₃晶面、形貌、光吸收特性及光催化降解效率的影响。 以紫外光下降解罗丹明B(RhB),考察样品的光催化性能。 结果表明,当Bi盐投加量为6 mmol(2.9106 g)时,SDS对Bi₂O₂CO₃的修饰对其光催化活性有所抑制;0.6 g CTAB修饰Bi₂O₂CO₃能有效提高其光催化活性;0.3 g SDS与CTAB耦合修饰Bi₂O₂CO₃就能有效提高其光催化活性;0.3 g PEG8000修饰Bi₂O₂CO₃也能使其光催化活性有所提高。     

光生电荷梯度连续传递链的构筑及对光催化性能的增强作用

选取能带位置匹配的γ-Bi₂O₃, α-Bi₂O₃和Bi₄Ti₃O₁₂, 采用等体积浸渍法原位构筑了具有梯度能级的Bi₄Ti₃O₁₂@α/γ-Bi₂O₃三元同素结光催化剂. 光催化降解高浓度罗丹明B(RhB)和四氯苯酚(4-CP)的实验结果表明, 相比于γ-Bi₂O₃和α/γ-Bi₂O₃, Bi₄Ti₃O₁₂@α/γ-Bi₂O₃显示出优异的光催化活性, 其中0.5%Bi₄Ti₃O₁₂@α/γ-Bi₂O₃显示了最佳的光催化性能, 光降解RhB(或4-CP)的活性是γ-Bi₂O₃的32倍(或10.4倍)和α/γ-Bi₂O₃的4.4倍(或2.2倍). 光电性质表征结果证实, Bi₄Ti₃O₁₂@α/γ-Bi₂O₃三元同素结具有高效的光生电荷分离和迁移效率, 这是Bi₄Ti₃O₁₂@α/γ-Bi₂O₃三元同素结具有较高光催化性能的主要原因之一.     

纳米Al2O3包覆富锂锰基正极材料Li1.2Ni0.13Co0.13Mn0.54O2的性能研究

采用纳米三氧化二铝(Al₂O₃)对富锂锰基正极材料Li_1.2Ni_0.13Co_0.13Mn_0.54O₂进行表面均匀包覆, 并考察了最优纳米Al₂O₃包覆量下材料的电化学性能. 扫描电子显微镜(SEM)和透射电子显微镜(TEM)显示了纳米Al₂O₃对富锂锰基正极材料表面均匀包覆, X射线衍射分析(XRD)结果表明包覆后富锂材料依然具有良好的层状结构. 恒流充/放电循环测试发现, 包覆后的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料的首次放电比容量为249.7 mA·h/g, 循环100次后的容量保持率为89.5%, 与未包覆的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料相比, 容量保持率提升约13%. 循环伏安(CV)和电化学阻抗(EIS)测试结果表明, 纳米Al₂O₃包覆可有效抑制材料极化, 降低界面阻抗和电荷转移阻抗, 进而提升富锂锰基正极材料的电化学性能.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.