基于聚2,6-二氨基吡啶膜及纳米金修饰的癌胚抗原免疫传感器研究

在玻碳电极表面电聚合2,6-二氨基吡啶(pPA), 利用硫堇(Thi)、纳米金(nano-Au)固载癌胚抗体, 制得稳定性好、灵敏度较高、线性范围宽的电流型免疫传感器. 通过循环伏安法考察了该免疫传感器的电化学特性, 在优化的实验条件下, 该免疫传感器的峰电流随着检测溶液中癌胚抗原(CEA)浓度的增大而减小, 并在0.5～20和20～160 ng/mL CEA范围内呈现出良好的线性关系, 检测下限为0.2 ng/mL. 该免疫传感器具有制作简单、重现性好、线性范围宽等优点, 可用于临床上对CEA的检测.     

基于纳米金/壳聚糖/石墨烯的癌胚抗原阻抗型免疫传感器

研究了在PBS缓冲介质中,一种检测癌胚抗原的新型免标记阻抗型免疫传感器的制备及应用,基于石墨烯、纳米金在玻碳电极表面组装制备传感器,通过循环伏安法、交流阻抗法对制备的传感器进行表征。在优化的实验条件下,该免疫传感器的阻抗值随着检测溶液中癌胚抗原(CEA)浓度的增大而增大,并在0.1～85 ng/mL CEA范围内呈线性关系,回归方程为△Ret=1605.55+39.26ρ;检测限为0.04 ng/mL(R=0.9992)。该免疫传感器可用于临床上对CEA的检测。     

基于纳米金/硫堇层层自组装的新型电流型酶-癌胚抗原免疫传感器

将Nafion 膜固定在金电极(Au)表面, 通过静电吸附和共价键合作用将硫堇(Thi)和纳米金颗粒(nano-Au)层层自组装到Nafion膜修饰的金电极表面. 再通过形成的纳米金单层吸附癌胚抗体(anti-CEA), 最后用辣根过氧化物酶(HRP)代替牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点, 并同时起到放大响应电流信号的作用, 从而制得高灵敏、高稳定电流型酶-癌胚抗原(CEA)免疫传感器. 通过循环伏安和交流阻抗考察了电极表面的电化学特性, 并对该免疫传感器的性能进行了详细的研究. 该传感器对CEA检测的线性范围为2.5~80.0 ng/mL, 检测限为0.90 ng/mL.     

基于金纳米颗粒负载的金属有机骨架材料的癌胚抗原传感器的研制

以负载Au的金属有机骨架材料(AuNPs/Cu-TPA)标记CEA抗体(Ab2)为信号探针,通过电还原的方法将氧化石墨烯还原到电极上,研制了一种捕获CEA抗体(Ab1)的电化学免疫传感器,并将其应用于癌胚抗原(CEA)检测.所合成的MOFs材料中含有大量Cu2+,且电化学信号比较稳定,因此可以通过检测MOFs材料中Cu2+的信号实现对CEA的检测.此信号探针不需要预处理和酸处理,易负载贵金属从而固定抗体,大大简化了检测步骤并缩短了检测时间.此传感器对CEA的检测灵敏度好,操作简便.在最优实验条件下,此传感器的线性范围为0.1～ 80 ng/mL,检出限为0.03 ng/mL,线性相关系数为0.9887,可用于真实样品中CEA的测定.     

基于HGB/PTh/AuNCs无标记癌胚抗原免疫传感器的研究

本文研制了一种基于中空石墨烯球(HGB)/聚硫堇/金纳米笼的无标记型癌胚抗原传感器。将合成的中空石墨烯球修饰于玻碳电极(GCE)表面,在其上电聚合硫堇形成多孔聚硫堇(PTh)复合膜后吸附固定金纳米笼,然后将癌胚抗体(anti-CEA)固定到电极表面,制得无标记型癌胚抗原(CEA)免疫传感器。当抗体与抗原发生免疫反应时,形成的复合物阻碍了电子传递,从而降低聚硫堇的电催化活性。通过示差脉冲伏安法(DPV)检测聚硫堇的响应电流信号的降低,实现对CEA的无标记检测。在最优的实验条件下,检测癌胚抗原的线性范围为0.5~80 ng·mL-1,线性相关系数为0.9932,检测限为0.17 ng·mL-1。该免疫传感器可用于临床上CEA的检测。在血清样品中进行了CEA的检测,结果令人满意。     

基于二氧化硅-硫堇纳米复合物构建高灵敏癌胚抗原电流型免疫传感器

利用电沉积纳米金(AuNPs)修饰玻碳电极(GCE)表面并通过AuNPs固定癌胚抗原(CEA)的捕获抗体(Ab1),以牛血清白蛋白(BSA)封闭非特异性吸附位点;以γ-(2,3环氧丙氧)丙基三甲氧基硅烷(GPMS)作交联剂,将单分散的SiO_2纳米粒子与电子媒介体硫堇(Thi)结合成SiO_2-Thi纳米复合物,偶联辣根过氧化物酶(HRP)标记的CEA二抗(HRP-Ab2)作为电化学免疫检测信号,构建了具有信号放大效应的电流型免疫传感器并用于CEA的高灵敏检测。在CEA存在下,进行电化学酶联夹心免疫反应。在含有H2O2的磷酸盐缓冲溶液(PBS)中,标记在SiO_2-Thi纳米复合物上的HRP能催化H_2O_2氧化电子媒介体Thi,产生增强的还原峰电流,从而提高检测CEA的峰电流响应信号,进而实现对CEA的高灵敏电化学酶联夹心免疫分析。在最优实验条件下,该免疫传感器的差分脉冲伏安(DPV)还原峰电流与CEA质量浓度的对数在0.01~20ng/mL范围内呈良好的线性关系,检出限为3pg/mL(S/N=3)。该传感器对血清样品进行加标回收实验,回收率为97.3%~105.7%,可初步用于临床对CEA的检测。     

基于放大鲁米诺电致化学发光构建的夹心型超灵敏免疫传感器

本文以金铂纳米合金(Au-PtNPs)修饰的玻碳电极作为一抗(Ab1)甲胎蛋白抗体(anti-AFP)的固载界面,葡萄糖氧化酶(GOD)负载纳米金修饰的还原态石墨烯(AuNPs@rGr-GOD)来标记二抗,构建超灵敏的基于放大鲁米诺(Luminol)电致化学发光(ECL)的免疫传感器。在含适量葡萄糖的Luminol检测底液中,构建的免疫传感器可有效放大ECL信号。实验结果表明,制备的免疫传感器对甲胎蛋白(AFP)的检测在0.001～200ng/mL范围内呈现良好的线性响应,其检测限低至0.3pg/mL。该传感器可用于实际血清样本的检测。     

癌胚抗原快速无分离电化学免疫检测

通过同时固定硫堇和HRP标记癌胚抗原(CEA)抗体于电化学预处理的玻碳电极表面,制备了新型无需分离的CEA快速电化学检测免疫传感器.CEA测定的两段线性范围为0.5～3.0和3.0～167 ng/mL,检测下限为0.1 ng/mL.该传感器具有良好的准确性、精密度、制备重复性和稳定性.该方法缩短了分析时间,降低了测定成本,适用于临床CEA的快速测定.     

电化学免疫传感器测定牛奶中的青霉素

利用共价键合法,将新亚甲蓝(NMB)与辣根过氧化酶(HRP)标记的青霉素多克隆抗体(Ab*)修饰于玻碳电极表面,制成电流型免疫传感器;考察了该传感器的电化学行为和对H2O2的电化学响应.结果表明,NMB作为介体能有效地传递电子,传感器对H2O2具有很好的催化作用.用此传感器对牛奶中的青霉素进行检测,其线性范围为0.25～3.00ng/mL (R=0.984),检出限为0.298ng/mL.     

基于纳米铂-单壁碳纳米管-壳聚糖的癌胚抗原电化学阻抗型免疫传感研究

将单壁碳纳米管-壳聚糖的复合材料(SWCNTs-CS)滴涂在玻碳电极后,采用恒电位沉积的方法在SWCNTs-CS上生成纳米铂,形成Pt NPs-SWCNTsCS复合物后用以固定癌胚抗原抗体(anti-CEA)制成免疫传感界面,在癌胚抗原(CEA)的存在下,在电极表面形成抗原-抗体免疫复合物,以[Fe(CN)6]3-/4-作为混合探针电解质,构建一种简单灵敏无标记的阻抗型免疫分析方法。随着固定CEA量增加,传感器上传递电子的能力下降导致阻抗值增大,且CEA浓度在0.010~12 ng/m L范围时,与阻抗值呈现出良好的线性关系,线性方程为△Retohm=(831.3±17.8)cCEA(ng/m L)+(885.8±95.1)(R2=0.997),检测限为4.2 pg/m L(S/N=3)。该免疫传感器具有良好的稳定性和选择性,回收率在95.0%~108.6%,可初步用于临床对CEA的检测。     

基于离子液体-石墨烯-二茂铁的高灵敏电化学免疫传感器检测CEA

研究了在PBS缓冲介质中,一种检测癌胚抗原的新型免标记免疫电化学传感器的制备,将石墨烯、二茂铁的高效催化及壳聚糖的优良生物相容性和成膜性、离子液体的导电性等优势充分结合构建了电化学免疫传感器。通过循环伏安法及交流阻抗对修饰的电极进行表征,在最优条件下,癌胚抗原的质量浓度在0.2～50.0 ng/mL的范围内与差分脉冲伏安法峰电流呈良好的线性关系,回归方程为Δi=0.38-1.31ρ,相关系数分别为0.9967,检测限为0.06 ng/mL,该传感器可用于人血清样品的测定。     

基于酶催化沉积质量放大的压电免疫传感器的研究

提出了一种酶催化沉积质量放大的高灵敏压电免疫传感器. 采用1,6-二巯基己烷在石英晶振上自组装一单分子层, 再通过另一端巯基连接胶体金, 利用胶体金的高比表面积和强吸附作用力增加抗IgG抗体的固定量, 同时借助胶体金优良的生物亲和性保持抗IgG抗体的活性. 在H2O2存在下, 通过标记在抗人IgG抗体上的HRP酶催化底物DAB(3,3′-联苯二胺), 反应中生成的不溶性产物沉积到石英晶振的Au电极表面, 达到质量放大的目的. 结果表明, 检测人IgG在16 ng/mL-100 μg/mL范围内有很好的线性关系, 检测下限为10 ng/mL, 在用于实际试样的回收率测定中, 结果良好.     

基于双层纳米金修饰的高灵敏电位型乙肝表面抗原免疫传感器研究

基于电沉积和层层自组装技术，提出了一种新的生物分子固定化方法，研制成一种高灵敏电位型乙肝表面抗原免疫传感器。利用L-半胱胺酸（LCys）的双官能团结合双层纳米金，从而通过比表面积大，生物相容性好的纳米金胶吸附大量抗体，同时用聚乙烯醇缩丁醛（PVB）薄膜的笼效应把乙肝表面抗体（HBsAb）和纳米金固定在玻碳电极上，从而制得了高灵敏度、高稳定性的电位型免疫传感器。采用循环伏安法（CV）对电极的层层自组装过程进行了考察，并对该免疫传感器的性能进行了详细的研究。该免疫传感器线性范围是8．5～256．0ng／mL，线性相关系数为0．9978，灵敏度为89．0，检出限为3．1ng／mL。已用于病人的血清样品分析。     

Ultrasensitive electrochemical immunosensor of carcinoembryonic antigen based on gold-label silver-stain signal amplification

A novel gold-label silver-stain electrochemical immunosensor based on polythionine-gold nanoparticles (PTh-Au NPs) modified glassy carbon electrode (GCE) as a platform and secondary antibody labeled Au NPs (Ab₂-Au NPs) as immumoprobe for carcinoembryonic antigen (CEA) detection. The sandwich-type biosensor adopted anodic stripping voltammetry to detect silver stripping signal when the Ab₂-Au NPs of the formed immunocomplexes were stained with silver.     

Highly Sensitive and Selective Voltammetric Sensor Fullerene Modified Glassy Carbon Electrode for Determination of Cefitizoxime in Solubilized System

The usefulness of fullerene modified glassy carbon electrode in mediating the reduction of cefitizoxime in solubilized system has been demonstrated. Due to the unique structure and extraordinary properties, fullerene shows higher catalytic efficiency towards cefitizoxime reduction. The kinetic parameters, electron transfer coefficient (α) and rate constant (K₀) across the modified electrode are 0.37 and 0.1081/s respectively. The proposed square‐wave voltammetric method is linear over the concentration range 1.2–10.3 µg/mL. The limit of detection (LOD) is found 0.27 ng/mL. High sensitivity and selectivity together with low detection limit of the electrode response make it suitable for the determination of cefitizoxime.     

Electrochemical Sensor Based on Thioether Oligomer Poly(N‐vinylpyrrolidone)‐modified Gold Electrode for Bisphenol A Detection

Presently, bisphenol A (BPA) has been added to the list of substances of very high concern as endocrine disruptors. According to the literature, exposure to bisphenol A even at low doses may result in adverse health effects. In this study, electrochemical sensor of Bisphenol A based on thioether DDT‐Poly(N‐vinylpyrrolidone) oligomer has been developed. The thioether oligomer, which is capable of recognizing BPA, was prepared and used for gold electrode modification. The characterization of the modified gold electrode and the synthesized thioether oligomer were carried out by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and Size exclusion chromatography (SEC). Obtained results indicate that the modified electrode shows good electrochemical activity, good sensitivity and reproducibility for BPA detection. It exhibited a good linear relationship ranging from 1 to 20 pg/mL, and the detection limit was found to be 1.9 pg/mL at S/N=3. Several interfering species such as hydroquinone, phenol and resorcinol were used and their behaviors on the modified gold electrode were investigated.     

Sandwich-type electrochemiluminescence immunosensor based on N-(aminobutyl)-N-ethylisoluminol labeling and gold nanoparticle amplification

A novel electrochemiluminescence (ECL) sandwich-type immunosensor for human immunoglobulin G (hIgG) on a gold nanoparticle modified electrode was developed by using N-(aminobutyl)-N-ethylisoluminol (ABEI) labeling. The primary antibody, goat-anti-human IgG was first immobilized on a gold nanoparticle modified electrode, then the antigen (human IgG) and the ABEI-labeled second antibody was conjugated successively to form a sandwich-type immunocomplex. ECL was carried out with a double-step potential in carbonate buffer solution (CBS) containing 1.5 mM H₂O₂. The ECL intensity increased linearly with the concentration of hIgG over the range 5.0-100 ng/mL. The limit of detection was 1.68 ng/mL (S/N = 3). The relative standard deviation was 3.79% at 60 ng/mL (n = 9). The present immunosensor is simple and sensitive. It has been successfully applied to the detection of hIgG in human serums.     

高灵敏甲胎蛋白夹心免疫传感器的制备

构建了新型甲胎蛋白(AFP)夹心免疫传感器.采用金纳米粒子-氧化石墨烯-普鲁士蓝纳米立方体(AuNP-GO-PBNCs)纳米复合材料标记甲胎蛋白(AFP)二抗,将制备的金-聚多巴胺-四氧化三铁(Au-PDA-Fe3O4)磁性纳米复合物固定在自制的磁性电极表面,通过吸附作用固定AFP一抗,用牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点.在37℃下与AFP抗原溶液孵育50 min,最后将电极放入AuNP-GO-PBNCs纳米复合材料标记的二抗溶液中孵育,基于此建立了采用普鲁士蓝(PB)标记的的夹心免疫传感器检测AFP的方法.在最佳实验条件下,PB催化H2O2氧化的响应电流与AFP的浓度表现出两段线性关系,线性范围分别为0.005~1.000 ng/mL和1~20 ng/mL, 检出限(LOD, S/N=3)为1.0 pg/mL.本方法具有灵敏度高、选择性好的特点.     

A competitive microcystin-LR immunosensor based on Au NPs@metal-organic framework (MIL-101)

A porous metal organic frameworks (MOFs) material (MIL-101) based on trivalent chromium skeleton were synthesized by hydrothermal synthesis method, and loaded with Au nanoparticles (Au NPs) to prepare Au NPs@MIL-101 composite materials which were used as a marker to label anti microcystin-LR (Anti-MC-LR). The composite materials have strong catalytic properties to the oxidation of ascorbic acid. Anti-MC-LR was immobilized on glassy carbon electrode surface using electrodeposition graphene oxide (GO) as a fixed matrix to construct a competitive microcystin-LR immunosensor.