Validated ecofriendly chromatographic method for quantitative determination of anti‐migraine quaternary mixture

A novel ecofriendly, cost and time saving high‐performance thin‐layer chromatographic method was developed and validated for simultaneous determination of metoclopramide, ergotamine, caffeine, and paracetamol in bulk and pharmaceutical formulation. The separation was carried out on silica gel plates, using ethyl acetate:ethanol:ammonia (9:1:0.1, v/v/v) as a developing system. Ultraviolet detection was carried out at 272 nm. The resulting retention times were 0.15, 0.36, 0.49, and 0.74 min for metoclopramide, ergotamine, caffeine, and paracetamol, respectively. The greenness profile assessment was achieved to the proposed method to evaluate its greenness characters to the environment with acceptable results. Validation parameters were checked according to International Conference of Harmonization guidelines to achieve the international requirements for quality control analysis of the proposed drugs.     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Electrochemical Affinity Sensors Using Field Effect Transducer Devices for Chemical Analysis

The review presents advances and main challenges of the affinity sensors based on field- effect transistors published during the last five years. The different nanomaterial-based field-effect transistors are classified according to the nature of the nanomaterials, beginning by silicon, the “gold-standard” semiconductor, the gallium nitride semiconductor, the organic semiconductors, the silicon nanowires, the inorganic nanomaterials, the carbon nanotubes and the graphene. Due to its exceptional electrical properties, the main works are devoted to graphene. The obtained analytical performances for the detection of biomarkers, of DNA sequences and of miRNA are listed. The relation between the operational conditions - nature of the nanomaterials, procedure of preparation, choice of the receptor molecule, method of immobilization – and the analytical performance are discussed. The perspective of industrialization of these affinity sensors based on field-effect transistors is discussed.     

Polymethylmethacrylate derivatives Eudragit E100 and L100: Interactions and complexation with surfactants

Precipitation or coprecipitation of polyelectrolytes has been largely investigated. However, the precipitation of polyelectrolytes via addition of charged and non‐charged surfactants has not been systematically studied and reported. Consequently, the aim of this work is to investigate the effect of different surfactants (anionic, cationic, non‐charged and zwitterionic) on the precipitation of cationic and anionic polymethylmethacrylate polymers (Eudragit). The surfactants effect has been investigated as a function of their concentration. Special attention has been dedicated to the CMC range and to the colloidal characterization of the formed dispersions. Moreover, the effect of salt (NaCl) and pH was also addressed. It is pointed out that non‐ionic and zwitterionic surfactants do not interact with charged Eudragit E100 and L100. For oppositely charged Eudragit E100/SDS and Eudragit L100/CTAB, precipitation occurs, and the obtained dispersions have been characterized in terms of particle size distribution and zeta potential. It was established that the binding of SDS molecules to Eudragit E100 polymer chains is made through the negative charges of the surfactant heads under the CMC value whereas binding of CTAB to Eudragit L100 chains is made at a CTAB concentration 5 times above its CMC. For Eudragit E100/SDS system, a more acidic medium induces aggregation. A same result was observed for the Eudragit L100/CTAB at a more basic pH. Moreover, it was observed that increasing salt concentration (higher than 100 mM) led to aggregation as generally observed for polycations/anionic surfactant systems.     

Identification of Potential SARS-CoV-2 Main Protease and Spike Protein Inhibitors from the Genus Aloe: An In Silico Study for Drug Development

Severe acute respiratory syndrome coronavirus (SARS-CoV-2) disease is a global rapidly spreading virus showing very high rates of complications and mortality. Till now, there is no effective specific treatment for the disease. Aloe is a rich source of isolated phytoconstituents that have an enormous range of biological activities. Since there are no available experimental techniques to examine these compounds for antiviral activity against SARS-CoV-2, we employed an in silico approach involving molecular docking, dynamics simulation, and binding free energy calculation using SARS-CoV-2 essential proteins as main protease and spike protein to identify lead compounds from Aloe that may help in novel drug discovery. Results retrieved from docking and molecular dynamics simulation suggested a number of promising inhibitors from Aloe. Root mean square deviation (RMSD) and root mean square fluctuation (RMSF) calculations indicated that compounds 132, 134, and 159 were the best scoring compounds against main protease, while compounds 115, 120, and 131 were the best scoring ones against spike glycoprotein. Compounds 120 and 131 were able to achieve significant stability and binding free energies during molecular dynamics simulation. In addition, the highest scoring compounds were investigated for their pharmacokinetic properties and drug-likeness. The Aloe compounds are promising active phytoconstituents for drug development for SARS-CoV-2.     

Facile one-pot,three-component synthesis of novel bis(heterocycles) incorporating thieno[2,3-b]thiophenes via Michael addition reaction

A synthesis of novel series of bis(2-amino-3-cyano-4H-chromene), bis(2-amino-3-cyanopyrano[3,2-c]chromene), bis(6-amino-5-cyano-1,4-dihydropyrano[2,3-c]pyrazole), and bis(2,7-diamino-3,4,6-tricyanopyrazolo[1,5-a]pyridine) derivatives linked to thieno[2,3-b]thiophene core via ether or ester linkages was reported. The formation of the target compounds presumably proceeds through a three component reaction of the appropriate bis(aldehyde) with 2 M of each of malononitrile and the corresponding active methylene compounds namely; dimedone, 4-hydroxycoumarine, 5-methyl-2,4-dihydro-3H-pyrazol-3-one, or cyanomethylpyrazole in dioxane at reflux in the presence of piperdine as a basic catalyst. The chemical structures of the new compounds were elucidated by several spectral tools.     

SYNTHESIS OF MONO-AND DIALKYLPHOSPHATES BY THE REACTIONS OF HYDROXYCOMPOUNDS WITH THE PHOSPHORUS PENTAOXIDE UNDER MICROWAVE IRRADIATION

The reactions of phosphorus pentoxide with two alcohols and one phenol were performed in different conditions under microwave irradiation. The products (alkylphosphates and dialkylphosphates) were identical to those formed by classic heating and were obtained with better yields. The speed of the reaction was increased by a factor from 100 to 4000.     

Adsorption of CO<Subscript>2</Subscript>-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO<Subscript>2</Subscript> separation

Adsorption of CO₂, N₂, CH₄ and H₂ on triamine-grafted pore-expanded MCM-41 mesoporous silica (TRI-PE-MCM-41) was investigated at room temperature in a wide range of pressure (up to 25 bar) using gravimetric measurements. The material was found to exhibit high affinity toward CO₂ in comparison to the other species over the whole range of pressure. Column-breakthrough dynamic measurements of CO₂-containing mixtures showed very high selectivity toward CO₂ over N₂, CH₄ and H₂ at CO₂ concentrations within the range of 5 to 50%. These conditions are suitable for effective removal of CO₂ at room temperature from syngas, flue gas and biogas using temperature swing (TS) or temperature-pressure swing (TPS) regeneration mode. Moreover, TRI-PE-MCM-41 was found to be highly stable over hundreds of adsorption-desorption cycles using TPS as regeneration mode.     

A new method for constructing a minimal PERT network

A project is an enterprise consisting of several activities which are to be carried out in some specific order. The activities and the order in which they need to be carried out can be represented by a PERT network. The PERT technique is a traditional, well-known approach to the expert of project management. When networks are used, it often becomes necessary to draw dummy activities. Since the computation of project completion time is proportional to the number of arcs, including dummy arcs, it is desirable to draw a network with as few dummy activities as possible.In this paper, we propose a new method for constructing, for a given project scheduling problem, a PERT network having as small as possible the number of dummy arcs by using some results on line graphs. This algorithm deals with the existence of transitive arcs. The paper contains illustrative examples, proofs of some theoretical results as well as a comparative study with a similar algorithm known in the literature. Computational results showed the superiority of our algorithm.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.